Message ID | 20230704040044.681850-3-randy.li@synaptics.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Improve V4L2 M2M job scheduler | expand |
Le mardi 04 juillet 2023 à 12:00 +0800, Hsia-Jun Li a écrit : > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > Many drivers have to create its own buf_struct for a > vb2_queue to track such a state. Also driver has to > iterate over rdy_queue every times to find out a buffer > which is not sent to hardware(or firmware), this new > list just offers the driver a place to store the buffer > that hardware(firmware) has acknowledged. > > One important advance about this list, it doesn't like > rdy_queue which both bottom half of the user calling > could operate it, while the v4l2 worker would as well. > The v4l2 core could only operate this queue when its > v4l2_context is not running, the driver would only > access this new hw_queue in its own worker. That's an interesting proposal. I didn't like leaving decoded frames into the rdy_queue, but removing them required me to have my own list, so that I can clean it up if some buffers are never displayed. We'll see if we can use this into wave5. > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > --- > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > include/media/v4l2-mem2mem.h | 10 +++++++++- > 2 files changed, 26 insertions(+), 9 deletions(-) > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > index c771aba42015..b4151147d5bd 100644 > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > goto job_unlock; > } > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > - dprintk("No input buffers available\n"); > - goto job_unlock; > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > + src = v4l2_m2m_next_src_buf(m2m_ctx); > + > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > + dprintk("No input buffers available\n"); > + goto job_unlock; > + } > } > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > - dprintk("No output buffers available\n"); > - goto job_unlock; > + > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > + dprintk("No output buffers available\n"); > + goto job_unlock; > + } > } > > m2m_ctx->new_frame = true; > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > INIT_LIST_HEAD(&q_ctx->rdy_queue); > q_ctx->num_rdy = 0; > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > if (m2m_dev->curr_ctx == m2m_ctx) { > m2m_dev->curr_ctx = NULL; > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > spin_lock_init(&out_q_ctx->rdy_spinlock); > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > index d6c8eb2b5201..2342656e582d 100644 > --- a/include/media/v4l2-mem2mem.h > +++ b/include/media/v4l2-mem2mem.h > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > * processed > * > * @q: pointer to struct &vb2_queue > - * @rdy_queue: List of V4L2 mem-to-mem queues > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > + * by user would be added to this list. > * @rdy_spinlock: spin lock to protect the struct usage > * @num_rdy: number of buffers ready to be processed > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > + * (or device's firmware). A buffer could only be in either > + * this list or @rdy_queue. > + * Driver may choose not to use this list while uses its own > + * private data to do this work. What's the threading protection around this one ? Also, would it be possible to opt-in that the driver cleanup that list automatically after streamoff has been executed ? One thing the doc is missing, is that HW buffer are actually flagged as ACTIVE buffer vb2, there is a strong link between the two concept, and the doc should take care. > * @buffered: is the queue buffered? > * > * Queue for buffers ready to be processed as soon as this > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > struct list_head rdy_queue; > spinlock_t rdy_spinlock; > u8 num_rdy; > + struct list_head hw_queue; > bool buffered; > }; >
Hi Hsia-Jun, kernel test robot noticed the following build warnings: https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Hsia-Jun-Li/media-v4l2-mem2mem-allow-device-run-without-buf/20230704-120308 base: git://linuxtv.org/media_tree.git master patch link: https://lore.kernel.org/r/20230704040044.681850-3-randy.li%40synaptics.com patch subject: [PATCH 2/2] media: v4l2-mem2mem: add a list for buf used by hw config: arm64-randconfig-m041-20230710 (https://download.01.org/0day-ci/archive/20230711/202307110324.A5LMPHou-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 12.3.0 reproduce: (https://download.01.org/0day-ci/archive/20230711/202307110324.A5LMPHou-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Reported-by: Dan Carpenter <dan.carpenter@linaro.org> | Closes: https://lore.kernel.org/r/202307110324.A5LMPHou-lkp@intel.com/ smatch warnings: drivers/media/v4l2-core/v4l2-mem2mem.c:343 __v4l2_m2m_try_queue() error: uninitialized symbol 'src'. drivers/media/v4l2-core/v4l2-mem2mem.c:343 __v4l2_m2m_try_queue() error: uninitialized symbol 'dst'. vim +/src +343 drivers/media/v4l2-core/v4l2-mem2mem.c 9db3bbf58be59a drivers/media/v4l2-core/v4l2-mem2mem.c Ezequiel Garcia 2018-07-25 296 static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, 9db3bbf58be59a drivers/media/v4l2-core/v4l2-mem2mem.c Ezequiel Garcia 2018-07-25 297 struct v4l2_m2m_ctx *m2m_ctx) 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 298 { f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 299 unsigned long flags_job; f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 300 struct vb2_v4l2_buffer *dst, *src; 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 301 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 302 dprintk("Trying to schedule a job for m2m_ctx: %p\n", m2m_ctx); 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 303 f3e1a4c9d7a02d drivers/media/v4l2-core/v4l2-mem2mem.c Randy Li 2023-07-04 304 if (!(m2m_ctx->out_q_ctx.q.streaming || m2m_ctx->out_q_ctx.buffered) f3e1a4c9d7a02d drivers/media/v4l2-core/v4l2-mem2mem.c Randy Li 2023-07-04 305 || !(m2m_ctx->cap_q_ctx.q.streaming f3e1a4c9d7a02d drivers/media/v4l2-core/v4l2-mem2mem.c Randy Li 2023-07-04 306 || m2m_ctx->cap_q_ctx.buffered)) { 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 307 dprintk("Streaming needs to be on for both queues\n"); 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 308 return; 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 309 } 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 310 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 311 spin_lock_irqsave(&m2m_dev->job_spinlock, flags_job); 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 312 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 313 /* If the context is aborted then don't schedule it */ 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 314 if (m2m_ctx->job_flags & TRANS_ABORT) { 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 315 dprintk("Aborted context\n"); cbec2836f8be61 drivers/media/v4l2-core/v4l2-mem2mem.c Sakari Ailus 2018-10-18 316 goto job_unlock; 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 317 } 2ad5389b341282 drivers/media/v4l2-core/v4l2-mem2mem.c Shaik Ameer Basha 2013-09-20 318 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 319 if (m2m_ctx->job_flags & TRANS_QUEUED) { 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 320 dprintk("On job queue already\n"); cbec2836f8be61 drivers/media/v4l2-core/v4l2-mem2mem.c Sakari Ailus 2018-10-18 321 goto job_unlock; 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 322 } 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 323 cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 324) if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 325 src = v4l2_m2m_next_src_buf(m2m_ctx); cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 326) f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 327 if (!src && !m2m_ctx->out_q_ctx.buffered) { 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 328 dprintk("No input buffers available\n"); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 329 goto job_unlock; 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 330 } cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 331) } src uninitialized on else path. cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 332) cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 333) if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 334) dst = v4l2_m2m_next_dst_buf(m2m_ctx); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 335 if (!dst && !m2m_ctx->cap_q_ctx.buffered) { 7f98639def42a6 drivers/media/video/v4l2-mem2mem.c Pawel Osciak 2010-04-23 336 dprintk("No output buffers available\n"); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 337 goto job_unlock; f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 338 } cafbe530b02613 drivers/media/v4l2-core/v4l2-mem2mem.c Hsia-Jun(Randy Li 2023-07-04 339) } dst not initialized if !list_empty() f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 340 f07602ac388723 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 341 m2m_ctx->new_frame = true; f07602ac388723 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 342 f07602ac388723 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 @343 if (src && dst && dst->is_held && Uninitialized. f07602ac388723 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 344 dst->vb2_buf.copied_timestamp && f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 345 dst->vb2_buf.timestamp != src->vb2_buf.timestamp) { 86ef61ad686c17 drivers/media/v4l2-core/v4l2-mem2mem.c Nicolas Dufresne 2022-04-26 346 dprintk("Timestamp mismatch, returning held capture buffer\n"); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 347 dst->is_held = false; f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 348 v4l2_m2m_dst_buf_remove(m2m_ctx); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 349 v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 350 dst = v4l2_m2m_next_dst_buf(m2m_ctx); f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 351 f8cca8c97a63d7 drivers/media/v4l2-core/v4l2-mem2mem.c Hans Verkuil 2019-10-11 352 if (!dst && !m2m_ctx->cap_q_ctx.buffered) {
On 2023/7/8 03:20, Nicolas Dufresne wrote: > Le mardi 04 juillet 2023 à 12:00 +0800, Hsia-Jun Li a écrit : >> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >> >> Many drivers have to create its own buf_struct for a >> vb2_queue to track such a state. Also driver has to >> iterate over rdy_queue every times to find out a buffer >> which is not sent to hardware(or firmware), this new >> list just offers the driver a place to store the buffer >> that hardware(firmware) has acknowledged. >> >> One important advance about this list, it doesn't like >> rdy_queue which both bottom half of the user calling >> could operate it, while the v4l2 worker would as well. >> The v4l2 core could only operate this queue when its >> v4l2_context is not running, the driver would only >> access this new hw_queue in its own worker. > That's an interesting proposal. I didn't like leaving decoded frames into the > rdy_queue, but removing them required me to have my own list, so that I can > clean it up if some buffers are never displayed. > > We'll see if we can use this into wave5. > >> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >> --- >> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >> include/media/v4l2-mem2mem.h | 10 +++++++++- >> 2 files changed, 26 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >> index c771aba42015..b4151147d5bd 100644 >> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >> goto job_unlock; >> } >> >> - src = v4l2_m2m_next_src_buf(m2m_ctx); >> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >> - dprintk("No input buffers available\n"); >> - goto job_unlock; >> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >> + src = v4l2_m2m_next_src_buf(m2m_ctx); >> + >> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >> + dprintk("No input buffers available\n"); >> + goto job_unlock; >> + } >> } >> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >> - dprintk("No output buffers available\n"); >> - goto job_unlock; >> + >> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >> + dprintk("No output buffers available\n"); >> + goto job_unlock; >> + } >> } >> >> m2m_ctx->new_frame = true; >> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >> INIT_LIST_HEAD(&q_ctx->rdy_queue); >> q_ctx->num_rdy = 0; >> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >> + INIT_LIST_HEAD(&q_ctx->hw_queue); >> >> if (m2m_dev->curr_ctx == m2m_ctx) { >> m2m_dev->curr_ctx = NULL; >> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >> >> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >> spin_lock_init(&out_q_ctx->rdy_spinlock); >> spin_lock_init(&cap_q_ctx->rdy_spinlock); >> >> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >> index d6c8eb2b5201..2342656e582d 100644 >> --- a/include/media/v4l2-mem2mem.h >> +++ b/include/media/v4l2-mem2mem.h >> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >> * processed >> * >> * @q: pointer to struct &vb2_queue >> - * @rdy_queue: List of V4L2 mem-to-mem queues >> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >> + * by user would be added to this list. >> * @rdy_spinlock: spin lock to protect the struct usage >> * @num_rdy: number of buffers ready to be processed >> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >> + * (or device's firmware). A buffer could only be in either >> + * this list or @rdy_queue. >> + * Driver may choose not to use this list while uses its own >> + * private data to do this work. > What's the threading protection around this one ? I mentioned that in commit message. " The v4l2 core could only operate this queue when its v4l2_context is not running, the driver would only access this new hw_queue in its own worker. " > Also, would it be possible to > opt-in that the driver cleanup that list automatically after streamoff has been > executed ? I think that is what streamoff purposes to do, or we don't have a method to let the hardware(firmware) release all its buffers. > > One thing the doc is missing, is that HW buffer are actually flagged as ACTIVE > buffer vb2, there is a strong link between the two concept, and the doc should > take care. I would like to complete the doc if people are not against about this idea. And I would put all necessary information in one place. > >> * @buffered: is the queue buffered? >> * >> * Queue for buffers ready to be processed as soon as this >> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >> struct list_head rdy_queue; >> spinlock_t rdy_spinlock; >> u8 num_rdy; >> + struct list_head hw_queue; >> bool buffered; >> }; >>
On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > Many drivers have to create its own buf_struct for a > vb2_queue to track such a state. Also driver has to > iterate over rdy_queue every times to find out a buffer > which is not sent to hardware(or firmware), this new > list just offers the driver a place to store the buffer > that hardware(firmware) has acknowledged. > > One important advance about this list, it doesn't like > rdy_queue which both bottom half of the user calling > could operate it, while the v4l2 worker would as well. > The v4l2 core could only operate this queue when its > v4l2_context is not running, the driver would only > access this new hw_queue in its own worker. Could you describe in what case such a list would be useful for a mem2mem driver? > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > --- > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > include/media/v4l2-mem2mem.h | 10 +++++++++- > 2 files changed, 26 insertions(+), 9 deletions(-) > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > index c771aba42015..b4151147d5bd 100644 > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > goto job_unlock; > } > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > - dprintk("No input buffers available\n"); > - goto job_unlock; > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > + src = v4l2_m2m_next_src_buf(m2m_ctx); > + > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > + dprintk("No input buffers available\n"); > + goto job_unlock; > + } > } > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > - dprintk("No output buffers available\n"); > - goto job_unlock; > + > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > + dprintk("No output buffers available\n"); > + goto job_unlock; > + } > } src and dst would be referenced unitialized below if neither of the above ifs hits... Best regards, Tomasz > > m2m_ctx->new_frame = true; > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > INIT_LIST_HEAD(&q_ctx->rdy_queue); > q_ctx->num_rdy = 0; > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > if (m2m_dev->curr_ctx == m2m_ctx) { > m2m_dev->curr_ctx = NULL; > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > spin_lock_init(&out_q_ctx->rdy_spinlock); > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > index d6c8eb2b5201..2342656e582d 100644 > --- a/include/media/v4l2-mem2mem.h > +++ b/include/media/v4l2-mem2mem.h > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > * processed > * > * @q: pointer to struct &vb2_queue > - * @rdy_queue: List of V4L2 mem-to-mem queues > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > + * by user would be added to this list. > * @rdy_spinlock: spin lock to protect the struct usage > * @num_rdy: number of buffers ready to be processed > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > + * (or device's firmware). A buffer could only be in either > + * this list or @rdy_queue. > + * Driver may choose not to use this list while uses its own > + * private data to do this work. > * @buffered: is the queue buffered? > * > * Queue for buffers ready to be processed as soon as this > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > struct list_head rdy_queue; > spinlock_t rdy_spinlock; > u8 num_rdy; > + struct list_head hw_queue; > bool buffered; > }; > > -- > 2.17.1 >
On 7/12/23 17:33, Tomasz Figa wrote: > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: >> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >> >> Many drivers have to create its own buf_struct for a >> vb2_queue to track such a state. Also driver has to >> iterate over rdy_queue every times to find out a buffer >> which is not sent to hardware(or firmware), this new >> list just offers the driver a place to store the buffer >> that hardware(firmware) has acknowledged. >> >> One important advance about this list, it doesn't like >> rdy_queue which both bottom half of the user calling >> could operate it, while the v4l2 worker would as well. >> The v4l2 core could only operate this queue when its >> v4l2_context is not running, the driver would only >> access this new hw_queue in its own worker. > Could you describe in what case such a list would be useful for a > mem2mem driver? This list, as its description, just for saving us from creating a private buffer struct to track buffer state. The queue in the kernel is not the queue that hardware(codec firmware) are using. >> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >> --- >> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >> include/media/v4l2-mem2mem.h | 10 +++++++++- >> 2 files changed, 26 insertions(+), 9 deletions(-) >> >> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >> index c771aba42015..b4151147d5bd 100644 >> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >> goto job_unlock; >> } >> >> - src = v4l2_m2m_next_src_buf(m2m_ctx); >> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >> - dprintk("No input buffers available\n"); >> - goto job_unlock; >> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >> + src = v4l2_m2m_next_src_buf(m2m_ctx); >> + >> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >> + dprintk("No input buffers available\n"); >> + goto job_unlock; >> + } >> } >> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >> - dprintk("No output buffers available\n"); >> - goto job_unlock; >> + >> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >> + dprintk("No output buffers available\n"); >> + goto job_unlock; >> + } >> } > src and dst would be referenced unitialized below if neither of the > above ifs hits... I think they have been initialized at v4l2_m2m_ctx_init() > > Best regards, > Tomasz > >> m2m_ctx->new_frame = true; >> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >> INIT_LIST_HEAD(&q_ctx->rdy_queue); >> q_ctx->num_rdy = 0; >> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >> + INIT_LIST_HEAD(&q_ctx->hw_queue); >> >> if (m2m_dev->curr_ctx == m2m_ctx) { >> m2m_dev->curr_ctx = NULL; >> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >> >> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >> spin_lock_init(&out_q_ctx->rdy_spinlock); >> spin_lock_init(&cap_q_ctx->rdy_spinlock); >> >> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >> index d6c8eb2b5201..2342656e582d 100644 >> --- a/include/media/v4l2-mem2mem.h >> +++ b/include/media/v4l2-mem2mem.h >> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >> * processed >> * >> * @q: pointer to struct &vb2_queue >> - * @rdy_queue: List of V4L2 mem-to-mem queues >> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >> + * by user would be added to this list. >> * @rdy_spinlock: spin lock to protect the struct usage >> * @num_rdy: number of buffers ready to be processed >> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >> + * (or device's firmware). A buffer could only be in either >> + * this list or @rdy_queue. >> + * Driver may choose not to use this list while uses its own >> + * private data to do this work. >> * @buffered: is the queue buffered? >> * >> * Queue for buffers ready to be processed as soon as this >> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >> struct list_head rdy_queue; >> spinlock_t rdy_spinlock; >> u8 num_rdy; >> + struct list_head hw_queue; >> bool buffered; >> }; >> >> -- >> 2.17.1 >>
Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > > > Many drivers have to create its own buf_struct for a > > vb2_queue to track such a state. Also driver has to > > iterate over rdy_queue every times to find out a buffer > > which is not sent to hardware(or firmware), this new > > list just offers the driver a place to store the buffer > > that hardware(firmware) has acknowledged. > > > > One important advance about this list, it doesn't like > > rdy_queue which both bottom half of the user calling > > could operate it, while the v4l2 worker would as well. > > The v4l2 core could only operate this queue when its > > v4l2_context is not running, the driver would only > > access this new hw_queue in its own worker. > > Could you describe in what case such a list would be useful for a > mem2mem driver? Today all driver must track buffers that are "owned by the hardware". This is a concept dictated by the m2m framework and enforced through the ACTIVE flag. All buffers from this list must be mark as done/error/queued after streamoff of the respective queue in order to acknowledge that they are no longer in use by the HW. Not doing so will warn: videobuf2_common: driver bug: stop_streaming operation is leaving buf ... Though, there is no queue to easily iterate them. All driver endup having their own queue, or just leaving the buffers in the rdy_queue (which isn't better). Nicolas > > > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > > --- > > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > > include/media/v4l2-mem2mem.h | 10 +++++++++- > > 2 files changed, 26 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > > index c771aba42015..b4151147d5bd 100644 > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > > goto job_unlock; > > } > > > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > > - dprintk("No input buffers available\n"); > > - goto job_unlock; > > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > > + src = v4l2_m2m_next_src_buf(m2m_ctx); > > + > > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > > + dprintk("No input buffers available\n"); > > + goto job_unlock; > > + } > > } > > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > - dprintk("No output buffers available\n"); > > - goto job_unlock; > > + > > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > + dprintk("No output buffers available\n"); > > + goto job_unlock; > > + } > > } > > src and dst would be referenced unitialized below if neither of the > above ifs hits... > > Best regards, > Tomasz > > > > > m2m_ctx->new_frame = true; > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > > INIT_LIST_HEAD(&q_ctx->rdy_queue); > > q_ctx->num_rdy = 0; > > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > > > if (m2m_dev->curr_ctx == m2m_ctx) { > > m2m_dev->curr_ctx = NULL; > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > > spin_lock_init(&out_q_ctx->rdy_spinlock); > > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > > index d6c8eb2b5201..2342656e582d 100644 > > --- a/include/media/v4l2-mem2mem.h > > +++ b/include/media/v4l2-mem2mem.h > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > > * processed > > * > > * @q: pointer to struct &vb2_queue > > - * @rdy_queue: List of V4L2 mem-to-mem queues > > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > > + * by user would be added to this list. > > * @rdy_spinlock: spin lock to protect the struct usage > > * @num_rdy: number of buffers ready to be processed > > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > > + * (or device's firmware). A buffer could only be in either > > + * this list or @rdy_queue. > > + * Driver may choose not to use this list while uses its own > > + * private data to do this work. > > * @buffered: is the queue buffered? > > * > > * Queue for buffers ready to be processed as soon as this > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > > struct list_head rdy_queue; > > spinlock_t rdy_spinlock; > > u8 num_rdy; > > + struct list_head hw_queue; > > bool buffered; > > }; > > > > -- > > 2.17.1 > >
On 7/17/23 22:07, Nicolas Dufresne wrote: > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : >> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: >>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >>> >>> Many drivers have to create its own buf_struct for a >>> vb2_queue to track such a state. Also driver has to >>> iterate over rdy_queue every times to find out a buffer >>> which is not sent to hardware(or firmware), this new >>> list just offers the driver a place to store the buffer >>> that hardware(firmware) has acknowledged. >>> >>> One important advance about this list, it doesn't like >>> rdy_queue which both bottom half of the user calling >>> could operate it, while the v4l2 worker would as well. >>> The v4l2 core could only operate this queue when its >>> v4l2_context is not running, the driver would only >>> access this new hw_queue in its own worker. >> Could you describe in what case such a list would be useful for a >> mem2mem driver? > Today all driver must track buffers that are "owned by the hardware". This is a > concept dictated by the m2m framework and enforced through the ACTIVE flag. I think that flag is confusing, the m2m framework would only set this flag when a buffer is enqueue into v4l2 (__enqueue_in_driver()). The application can't know whether the driver(or hardware) would still use it when that buffer is dequeued(__vb2_dqbuf() would override the state here). I was trying to suggest a flag for the new DELETE_BUF ioctl() or it could delete a buffer which the hardware could still use in the future, if we are not in the case for non-secure stateless codec. > All > buffers from this list must be mark as done/error/queued after streamoff of the > respective queue in order to acknowledge that they are no longer in use by the > HW. Not doing so will warn: > > videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > > Though, there is no queue to easily iterate them. All driver endup having their > own queue, or just leaving the buffers in the rdy_queue (which isn't better). > > Nicolas >>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >>> --- >>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >>> include/media/v4l2-mem2mem.h | 10 +++++++++- >>> 2 files changed, 26 insertions(+), 9 deletions(-) >>> >>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >>> index c771aba42015..b4151147d5bd 100644 >>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >>> goto job_unlock; >>> } >>> >>> - src = v4l2_m2m_next_src_buf(m2m_ctx); >>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >>> - dprintk("No input buffers available\n"); >>> - goto job_unlock; >>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >>> + src = v4l2_m2m_next_src_buf(m2m_ctx); >>> + >>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >>> + dprintk("No input buffers available\n"); >>> + goto job_unlock; >>> + } >>> } >>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>> - dprintk("No output buffers available\n"); >>> - goto job_unlock; >>> + >>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>> + dprintk("No output buffers available\n"); >>> + goto job_unlock; >>> + } >>> } >> src and dst would be referenced unitialized below if neither of the >> above ifs hits... >> >> Best regards, >> Tomasz >> >>> m2m_ctx->new_frame = true; >>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >>> INIT_LIST_HEAD(&q_ctx->rdy_queue); >>> q_ctx->num_rdy = 0; >>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >>> + INIT_LIST_HEAD(&q_ctx->hw_queue); >>> >>> if (m2m_dev->curr_ctx == m2m_ctx) { >>> m2m_dev->curr_ctx = NULL; >>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >>> >>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >>> spin_lock_init(&out_q_ctx->rdy_spinlock); >>> spin_lock_init(&cap_q_ctx->rdy_spinlock); >>> >>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >>> index d6c8eb2b5201..2342656e582d 100644 >>> --- a/include/media/v4l2-mem2mem.h >>> +++ b/include/media/v4l2-mem2mem.h >>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >>> * processed >>> * >>> * @q: pointer to struct &vb2_queue >>> - * @rdy_queue: List of V4L2 mem-to-mem queues >>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >>> + * by user would be added to this list. >>> * @rdy_spinlock: spin lock to protect the struct usage >>> * @num_rdy: number of buffers ready to be processed >>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >>> + * (or device's firmware). A buffer could only be in either >>> + * this list or @rdy_queue. >>> + * Driver may choose not to use this list while uses its own >>> + * private data to do this work. >>> * @buffered: is the queue buffered? >>> * >>> * Queue for buffers ready to be processed as soon as this >>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >>> struct list_head rdy_queue; >>> spinlock_t rdy_spinlock; >>> u8 num_rdy; >>> + struct list_head hw_queue; >>> bool buffered; >>> }; >>> >>> -- >>> 2.17.1 >>>
On Mon, Jul 17, 2023 at 4:15 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: > > > On 7/12/23 17:33, Tomasz Figa wrote: > > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > > > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > >> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > >> > >> Many drivers have to create its own buf_struct for a > >> vb2_queue to track such a state. Also driver has to > >> iterate over rdy_queue every times to find out a buffer > >> which is not sent to hardware(or firmware), this new > >> list just offers the driver a place to store the buffer > >> that hardware(firmware) has acknowledged. > >> > >> One important advance about this list, it doesn't like > >> rdy_queue which both bottom half of the user calling > >> could operate it, while the v4l2 worker would as well. > >> The v4l2 core could only operate this queue when its > >> v4l2_context is not running, the driver would only > >> access this new hw_queue in its own worker. > > Could you describe in what case such a list would be useful for a > > mem2mem driver? > > This list, as its description, just for saving us from creating a > private buffer struct to track buffer state. > > The queue in the kernel is not the queue that hardware(codec firmware) > are using. > Sorry, I find the description difficult to understand. It might make sense to have the text proofread by someone experienced in writing technical documentation in English before posting in the future. Thanks. I think I got the point from Nicolas' explanation, though. > > >> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > >> --- > >> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > >> include/media/v4l2-mem2mem.h | 10 +++++++++- > >> 2 files changed, 26 insertions(+), 9 deletions(-) > >> > >> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > >> index c771aba42015..b4151147d5bd 100644 > >> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > >> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > >> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > >> goto job_unlock; > >> } > >> > >> - src = v4l2_m2m_next_src_buf(m2m_ctx); > >> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >> - if (!src && !m2m_ctx->out_q_ctx.buffered) { > >> - dprintk("No input buffers available\n"); > >> - goto job_unlock; > >> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > >> + src = v4l2_m2m_next_src_buf(m2m_ctx); > >> + > >> + if (!src && !m2m_ctx->out_q_ctx.buffered) { > >> + dprintk("No input buffers available\n"); > >> + goto job_unlock; > >> + } > >> } > >> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >> - dprintk("No output buffers available\n"); > >> - goto job_unlock; > >> + > >> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > >> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >> + dprintk("No output buffers available\n"); > >> + goto job_unlock; > >> + } > >> } > > src and dst would be referenced unitialized below if neither of the > > above ifs hits... > I think they have been initialized at v4l2_m2m_ctx_init() What do you mean? They are local variables in this function. > > > > Best regards, > > Tomasz > > > >> m2m_ctx->new_frame = true; > >> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > >> INIT_LIST_HEAD(&q_ctx->rdy_queue); > >> q_ctx->num_rdy = 0; > >> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > >> + INIT_LIST_HEAD(&q_ctx->hw_queue); > >> > >> if (m2m_dev->curr_ctx == m2m_ctx) { > >> m2m_dev->curr_ctx = NULL; > >> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > >> > >> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > >> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > >> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > >> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > >> spin_lock_init(&out_q_ctx->rdy_spinlock); > >> spin_lock_init(&cap_q_ctx->rdy_spinlock); > >> > >> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > >> index d6c8eb2b5201..2342656e582d 100644 > >> --- a/include/media/v4l2-mem2mem.h > >> +++ b/include/media/v4l2-mem2mem.h > >> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > >> * processed > >> * > >> * @q: pointer to struct &vb2_queue > >> - * @rdy_queue: List of V4L2 mem-to-mem queues > >> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > >> + * called in struct vb2_ops->buf_queue(), the buffer enqueued > >> + * by user would be added to this list. > >> * @rdy_spinlock: spin lock to protect the struct usage > >> * @num_rdy: number of buffers ready to be processed > >> + * @hw_queue: A list for tracking the buffer is occupied by the hardware > >> + * (or device's firmware). A buffer could only be in either > >> + * this list or @rdy_queue. > >> + * Driver may choose not to use this list while uses its own > >> + * private data to do this work. > >> * @buffered: is the queue buffered? > >> * > >> * Queue for buffers ready to be processed as soon as this > >> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > >> struct list_head rdy_queue; > >> spinlock_t rdy_spinlock; > >> u8 num_rdy; > >> + struct list_head hw_queue; > >> bool buffered; > >> }; > >> > >> -- > >> 2.17.1 > >> > -- > Hsia-Jun(Randy) Li >
On 7/27/23 15:25, Tomasz Figa wrote: > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > On Mon, Jul 17, 2023 at 4:15 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: >> >> >> On 7/12/23 17:33, Tomasz Figa wrote: >>> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. >>> >>> >>> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: >>>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >>>> >>>> Many drivers have to create its own buf_struct for a >>>> vb2_queue to track such a state. Also driver has to >>>> iterate over rdy_queue every times to find out a buffer >>>> which is not sent to hardware(or firmware), this new >>>> list just offers the driver a place to store the buffer >>>> that hardware(firmware) has acknowledged. >>>> >>>> One important advance about this list, it doesn't like >>>> rdy_queue which both bottom half of the user calling >>>> could operate it, while the v4l2 worker would as well. >>>> The v4l2 core could only operate this queue when its >>>> v4l2_context is not running, the driver would only >>>> access this new hw_queue in its own worker. >>> Could you describe in what case such a list would be useful for a >>> mem2mem driver? >> >> This list, as its description, just for saving us from creating a >> private buffer struct to track buffer state. >> >> The queue in the kernel is not the queue that hardware(codec firmware) >> are using. >> > > Sorry, I find the description difficult to understand. It might make > sense to have the text proofread by someone experienced in writing > technical documentation in English before posting in the future. > Thanks. > Sorry, I may not be able to get more resource here. I would try to ask a chatbot to fix my description next time. > I think I got the point from Nicolas' explanation, though. > >> >>>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >>>> --- >>>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >>>> include/media/v4l2-mem2mem.h | 10 +++++++++- >>>> 2 files changed, 26 insertions(+), 9 deletions(-) >>>> >>>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>> index c771aba42015..b4151147d5bd 100644 >>>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >>>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >>>> goto job_unlock; >>>> } >>>> >>>> - src = v4l2_m2m_next_src_buf(m2m_ctx); >>>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>> - dprintk("No input buffers available\n"); >>>> - goto job_unlock; >>>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >>>> + src = v4l2_m2m_next_src_buf(m2m_ctx); >>>> + >>>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>> + dprintk("No input buffers available\n"); >>>> + goto job_unlock; >>>> + } >>>> } >>>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>> - dprintk("No output buffers available\n"); >>>> - goto job_unlock; >>>> + >>>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >>>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>> + dprintk("No output buffers available\n"); >>>> + goto job_unlock; >>>> + } >>>> } >>> src and dst would be referenced unitialized below if neither of the >>> above ifs hits... >> I think they have been initialized at v4l2_m2m_ctx_init() > > What do you mean? They are local variables in this function. > Sorry, I didn't notice the sentence after that. >>> >>> Best regards, >>> Tomasz >>> >>>> m2m_ctx->new_frame = true; >>>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >>>> INIT_LIST_HEAD(&q_ctx->rdy_queue); >>>> q_ctx->num_rdy = 0; >>>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >>>> + INIT_LIST_HEAD(&q_ctx->hw_queue); >>>> >>>> if (m2m_dev->curr_ctx == m2m_ctx) { >>>> m2m_dev->curr_ctx = NULL; >>>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >>>> >>>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >>>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >>>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >>>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >>>> spin_lock_init(&out_q_ctx->rdy_spinlock); >>>> spin_lock_init(&cap_q_ctx->rdy_spinlock); >>>> >>>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >>>> index d6c8eb2b5201..2342656e582d 100644 >>>> --- a/include/media/v4l2-mem2mem.h >>>> +++ b/include/media/v4l2-mem2mem.h >>>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >>>> * processed >>>> * >>>> * @q: pointer to struct &vb2_queue >>>> - * @rdy_queue: List of V4L2 mem-to-mem queues >>>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >>>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >>>> + * by user would be added to this list. >>>> * @rdy_spinlock: spin lock to protect the struct usage >>>> * @num_rdy: number of buffers ready to be processed >>>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >>>> + * (or device's firmware). A buffer could only be in either >>>> + * this list or @rdy_queue. >>>> + * Driver may choose not to use this list while uses its own >>>> + * private data to do this work. >>>> * @buffered: is the queue buffered? >>>> * >>>> * Queue for buffers ready to be processed as soon as this >>>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >>>> struct list_head rdy_queue; >>>> spinlock_t rdy_spinlock; >>>> u8 num_rdy; >>>> + struct list_head hw_queue; >>>> bool buffered; >>>> }; >>>> >>>> -- >>>> 2.17.1 >>>> >> -- >> Hsia-Jun(Randy) Li >>
On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > > > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > > > > > Many drivers have to create its own buf_struct for a > > > vb2_queue to track such a state. Also driver has to > > > iterate over rdy_queue every times to find out a buffer > > > which is not sent to hardware(or firmware), this new > > > list just offers the driver a place to store the buffer > > > that hardware(firmware) has acknowledged. > > > > > > One important advance about this list, it doesn't like > > > rdy_queue which both bottom half of the user calling > > > could operate it, while the v4l2 worker would as well. > > > The v4l2 core could only operate this queue when its > > > v4l2_context is not running, the driver would only > > > access this new hw_queue in its own worker. > > > > Could you describe in what case such a list would be useful for a > > mem2mem driver? > > Today all driver must track buffers that are "owned by the hardware". This is a > concept dictated by the m2m framework and enforced through the ACTIVE flag. All > buffers from this list must be mark as done/error/queued after streamoff of the > respective queue in order to acknowledge that they are no longer in use by the > HW. Not doing so will warn: > > videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > > Though, there is no queue to easily iterate them. All driver endup having their > own queue, or just leaving the buffers in the rdy_queue (which isn't better). > Thanks for the explanation. I see how it could be useful now. Although I guess this is a problem specifically for hardware (or firmware) which can internally queue more than 1 buffer, right? Otherwise the current buffer could just stay at the top of the rdy_queue until it's removed by the driver's completion handler, timeout/error handler or context destruction. Best regards, Tomasz > Nicolas > > > > > > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > > > --- > > > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > > > include/media/v4l2-mem2mem.h | 10 +++++++++- > > > 2 files changed, 26 insertions(+), 9 deletions(-) > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > index c771aba42015..b4151147d5bd 100644 > > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > > > goto job_unlock; > > > } > > > > > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > > > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > - dprintk("No input buffers available\n"); > > > - goto job_unlock; > > > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > > > + src = v4l2_m2m_next_src_buf(m2m_ctx); > > > + > > > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > + dprintk("No input buffers available\n"); > > > + goto job_unlock; > > > + } > > > } > > > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > - dprintk("No output buffers available\n"); > > > - goto job_unlock; > > > + > > > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > > > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > + dprintk("No output buffers available\n"); > > > + goto job_unlock; > > > + } > > > } > > > > src and dst would be referenced unitialized below if neither of the > > above ifs hits... > > > > Best regards, > > Tomasz > > > > > > > > m2m_ctx->new_frame = true; > > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > > > INIT_LIST_HEAD(&q_ctx->rdy_queue); > > > q_ctx->num_rdy = 0; > > > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > > > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > > > > > if (m2m_dev->curr_ctx == m2m_ctx) { > > > m2m_dev->curr_ctx = NULL; > > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > > > > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > > > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > > > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > > > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > > > spin_lock_init(&out_q_ctx->rdy_spinlock); > > > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > > > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > > > index d6c8eb2b5201..2342656e582d 100644 > > > --- a/include/media/v4l2-mem2mem.h > > > +++ b/include/media/v4l2-mem2mem.h > > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > > > * processed > > > * > > > * @q: pointer to struct &vb2_queue > > > - * @rdy_queue: List of V4L2 mem-to-mem queues > > > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > > > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > > > + * by user would be added to this list. > > > * @rdy_spinlock: spin lock to protect the struct usage > > > * @num_rdy: number of buffers ready to be processed > > > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > > > + * (or device's firmware). A buffer could only be in either > > > + * this list or @rdy_queue. > > > + * Driver may choose not to use this list while uses its own > > > + * private data to do this work. > > > * @buffered: is the queue buffered? > > > * > > > * Queue for buffers ready to be processed as soon as this > > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > > > struct list_head rdy_queue; > > > spinlock_t rdy_spinlock; > > > u8 num_rdy; > > > + struct list_head hw_queue; > > > bool buffered; > > > }; > > > > > > -- > > > 2.17.1 > > > >
On Thu, Jul 27, 2023 at 4:33 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: > > > > On 7/27/23 15:25, Tomasz Figa wrote: > > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > > > > On Mon, Jul 17, 2023 at 4:15 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: > >> > >> > >> On 7/12/23 17:33, Tomasz Figa wrote: > >>> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > >>> > >>> > >>> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > >>>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > >>>> > >>>> Many drivers have to create its own buf_struct for a > >>>> vb2_queue to track such a state. Also driver has to > >>>> iterate over rdy_queue every times to find out a buffer > >>>> which is not sent to hardware(or firmware), this new > >>>> list just offers the driver a place to store the buffer > >>>> that hardware(firmware) has acknowledged. > >>>> > >>>> One important advance about this list, it doesn't like > >>>> rdy_queue which both bottom half of the user calling > >>>> could operate it, while the v4l2 worker would as well. > >>>> The v4l2 core could only operate this queue when its > >>>> v4l2_context is not running, the driver would only > >>>> access this new hw_queue in its own worker. > >>> Could you describe in what case such a list would be useful for a > >>> mem2mem driver? > >> > >> This list, as its description, just for saving us from creating a > >> private buffer struct to track buffer state. > >> > >> The queue in the kernel is not the queue that hardware(codec firmware) > >> are using. > >> > > > > Sorry, I find the description difficult to understand. It might make > > sense to have the text proofread by someone experienced in writing > > technical documentation in English before posting in the future. > > Thanks. > > > Sorry, I may not be able to get more resource here. I would try to ask a > chatbot to fix my description next time. I think people on the linux-media IRC channel (including me) could also be willing to help with rephrasing things, but if a chatbot can do it too, it's even better. :) > > I think I got the point from Nicolas' explanation, though. > > > >> > >>>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > >>>> --- > >>>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > >>>> include/media/v4l2-mem2mem.h | 10 +++++++++- > >>>> 2 files changed, 26 insertions(+), 9 deletions(-) > >>>> > >>>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>> index c771aba42015..b4151147d5bd 100644 > >>>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > >>>> goto job_unlock; > >>>> } > >>>> > >>>> - src = v4l2_m2m_next_src_buf(m2m_ctx); > >>>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >>>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { > >>>> - dprintk("No input buffers available\n"); > >>>> - goto job_unlock; > >>>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > >>>> + src = v4l2_m2m_next_src_buf(m2m_ctx); > >>>> + > >>>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { > >>>> + dprintk("No input buffers available\n"); > >>>> + goto job_unlock; > >>>> + } > >>>> } > >>>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >>>> - dprintk("No output buffers available\n"); > >>>> - goto job_unlock; > >>>> + > >>>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > >>>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >>>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >>>> + dprintk("No output buffers available\n"); > >>>> + goto job_unlock; > >>>> + } > >>>> } > >>> src and dst would be referenced unitialized below if neither of the > >>> above ifs hits... > >> I think they have been initialized at v4l2_m2m_ctx_init() > > > > What do you mean? They are local variables in this function. > > > Sorry, I didn't notice the sentence after that. > >>> > >>> Best regards, > >>> Tomasz > >>> > >>>> m2m_ctx->new_frame = true; > >>>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > >>>> INIT_LIST_HEAD(&q_ctx->rdy_queue); > >>>> q_ctx->num_rdy = 0; > >>>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > >>>> + INIT_LIST_HEAD(&q_ctx->hw_queue); > >>>> > >>>> if (m2m_dev->curr_ctx == m2m_ctx) { > >>>> m2m_dev->curr_ctx = NULL; > >>>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > >>>> > >>>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > >>>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > >>>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > >>>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > >>>> spin_lock_init(&out_q_ctx->rdy_spinlock); > >>>> spin_lock_init(&cap_q_ctx->rdy_spinlock); > >>>> > >>>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > >>>> index d6c8eb2b5201..2342656e582d 100644 > >>>> --- a/include/media/v4l2-mem2mem.h > >>>> +++ b/include/media/v4l2-mem2mem.h > >>>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > >>>> * processed > >>>> * > >>>> * @q: pointer to struct &vb2_queue > >>>> - * @rdy_queue: List of V4L2 mem-to-mem queues > >>>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > >>>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued > >>>> + * by user would be added to this list. > >>>> * @rdy_spinlock: spin lock to protect the struct usage > >>>> * @num_rdy: number of buffers ready to be processed > >>>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware > >>>> + * (or device's firmware). A buffer could only be in either > >>>> + * this list or @rdy_queue. > >>>> + * Driver may choose not to use this list while uses its own > >>>> + * private data to do this work. > >>>> * @buffered: is the queue buffered? > >>>> * > >>>> * Queue for buffers ready to be processed as soon as this > >>>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > >>>> struct list_head rdy_queue; > >>>> spinlock_t rdy_spinlock; > >>>> u8 num_rdy; > >>>> + struct list_head hw_queue; > >>>> bool buffered; > >>>> }; > >>>> > >>>> -- > >>>> 2.17.1 > >>>> > >> -- > >> Hsia-Jun(Randy) Li > >> > > -- > Hsia-Jun(Randy) Li
Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : > On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > > > > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > > > > > > > Many drivers have to create its own buf_struct for a > > > > vb2_queue to track such a state. Also driver has to > > > > iterate over rdy_queue every times to find out a buffer > > > > which is not sent to hardware(or firmware), this new > > > > list just offers the driver a place to store the buffer > > > > that hardware(firmware) has acknowledged. > > > > > > > > One important advance about this list, it doesn't like > > > > rdy_queue which both bottom half of the user calling > > > > could operate it, while the v4l2 worker would as well. > > > > The v4l2 core could only operate this queue when its > > > > v4l2_context is not running, the driver would only > > > > access this new hw_queue in its own worker. > > > > > > Could you describe in what case such a list would be useful for a > > > mem2mem driver? > > > > Today all driver must track buffers that are "owned by the hardware". This is a > > concept dictated by the m2m framework and enforced through the ACTIVE flag. All > > buffers from this list must be mark as done/error/queued after streamoff of the > > respective queue in order to acknowledge that they are no longer in use by the > > HW. Not doing so will warn: > > > > videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > > > > Though, there is no queue to easily iterate them. All driver endup having their > > own queue, or just leaving the buffers in the rdy_queue (which isn't better). > > > > Thanks for the explanation. I see how it could be useful now. > > Although I guess this is a problem specifically for hardware (or > firmware) which can internally queue more than 1 buffer, right? > Otherwise the current buffer could just stay at the top of the > rdy_queue until it's removed by the driver's completion handler, > timeout/error handler or context destruction. Correct, its only an issue when you need to process multiple src buffers before producing a dst buffer. If affects stateful decoder, stateful encoders and deinterlacer as far as I'm aware. Nicolas > > Best regards, > Tomasz > > > Nicolas > > > > > > > > > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > > > > --- > > > > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > > > > include/media/v4l2-mem2mem.h | 10 +++++++++- > > > > 2 files changed, 26 insertions(+), 9 deletions(-) > > > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > index c771aba42015..b4151147d5bd 100644 > > > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > > > > goto job_unlock; > > > > } > > > > > > > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > - dprintk("No input buffers available\n"); > > > > - goto job_unlock; > > > > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > > > > + src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > + > > > > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > + dprintk("No input buffers available\n"); > > > > + goto job_unlock; > > > > + } > > > > } > > > > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > - dprintk("No output buffers available\n"); > > > > - goto job_unlock; > > > > + > > > > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > > > > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > + dprintk("No output buffers available\n"); > > > > + goto job_unlock; > > > > + } > > > > } > > > > > > src and dst would be referenced unitialized below if neither of the > > > above ifs hits... > > > > > > Best regards, > > > Tomasz > > > > > > > > > > > m2m_ctx->new_frame = true; > > > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > > > > INIT_LIST_HEAD(&q_ctx->rdy_queue); > > > > q_ctx->num_rdy = 0; > > > > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > > > > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > > > > > > > if (m2m_dev->curr_ctx == m2m_ctx) { > > > > m2m_dev->curr_ctx = NULL; > > > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > > > > > > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > > > > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > > > > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > > > > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > > > > spin_lock_init(&out_q_ctx->rdy_spinlock); > > > > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > > > > > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > > > > index d6c8eb2b5201..2342656e582d 100644 > > > > --- a/include/media/v4l2-mem2mem.h > > > > +++ b/include/media/v4l2-mem2mem.h > > > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > > > > * processed > > > > * > > > > * @q: pointer to struct &vb2_queue > > > > - * @rdy_queue: List of V4L2 mem-to-mem queues > > > > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > > > > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > > > > + * by user would be added to this list. > > > > * @rdy_spinlock: spin lock to protect the struct usage > > > > * @num_rdy: number of buffers ready to be processed > > > > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > > > > + * (or device's firmware). A buffer could only be in either > > > > + * this list or @rdy_queue. > > > > + * Driver may choose not to use this list while uses its own > > > > + * private data to do this work. > > > > * @buffered: is the queue buffered? > > > > * > > > > * Queue for buffers ready to be processed as soon as this > > > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > > > > struct list_head rdy_queue; > > > > spinlock_t rdy_spinlock; > > > > u8 num_rdy; > > > > + struct list_head hw_queue; > > > > bool buffered; > > > > }; > > > > > > > > -- > > > > 2.17.1 > > > > > >
On Fri, Jul 28, 2023 at 1:58 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : > > On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > > > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > > > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > > > > > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > > > > > > > > > Many drivers have to create its own buf_struct for a > > > > > vb2_queue to track such a state. Also driver has to > > > > > iterate over rdy_queue every times to find out a buffer > > > > > which is not sent to hardware(or firmware), this new > > > > > list just offers the driver a place to store the buffer > > > > > that hardware(firmware) has acknowledged. > > > > > > > > > > One important advance about this list, it doesn't like > > > > > rdy_queue which both bottom half of the user calling > > > > > could operate it, while the v4l2 worker would as well. > > > > > The v4l2 core could only operate this queue when its > > > > > v4l2_context is not running, the driver would only > > > > > access this new hw_queue in its own worker. > > > > > > > > Could you describe in what case such a list would be useful for a > > > > mem2mem driver? > > > > > > Today all driver must track buffers that are "owned by the hardware". This is a > > > concept dictated by the m2m framework and enforced through the ACTIVE flag. All > > > buffers from this list must be mark as done/error/queued after streamoff of the > > > respective queue in order to acknowledge that they are no longer in use by the > > > HW. Not doing so will warn: > > > > > > videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > > > > > > Though, there is no queue to easily iterate them. All driver endup having their > > > own queue, or just leaving the buffers in the rdy_queue (which isn't better). > > > > > > > Thanks for the explanation. I see how it could be useful now. > > > > Although I guess this is a problem specifically for hardware (or > > firmware) which can internally queue more than 1 buffer, right? > > Otherwise the current buffer could just stay at the top of the > > rdy_queue until it's removed by the driver's completion handler, > > timeout/error handler or context destruction. > > Correct, its only an issue when you need to process multiple src buffers before > producing a dst buffer. If affects stateful decoder, stateful encoders and > deinterlacer as far as I'm aware. Is it actually necessary to keep those buffers in a list in that case, though? I can see that a deinterlacer would indeed need 2 input buffers to perform the deinterlacing operation, but those would be just known to the driver, since it's running the task currently. For a stateful decoder, wouldn't it just consume the bitstream buffer (producing something partially decoded to its own internal buffers) and return it shortly? The most realistic scenario would be for stateful encoders which could keep some input buffers as reference frames for further encoding, but then would this patch actually work for them? It would make __v4l2_m2m_try_queue never add the context to the job_queue if there are some buffers in that hw_queue list. Maybe what I need here are actual patches modifying some existing drivers. Randy, would you be able to include that in the next version? Thanks. Best regards, Tomasz > > Nicolas > > > > > Best regards, > > Tomasz > > > > > Nicolas > > > > > > > > > > > > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > > > > > --- > > > > > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > > > > > include/media/v4l2-mem2mem.h | 10 +++++++++- > > > > > 2 files changed, 26 insertions(+), 9 deletions(-) > > > > > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > index c771aba42015..b4151147d5bd 100644 > > > > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > > > > > goto job_unlock; > > > > > } > > > > > > > > > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > > - dprintk("No input buffers available\n"); > > > > > - goto job_unlock; > > > > > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > > > > > + src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > > + > > > > > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > > + dprintk("No input buffers available\n"); > > > > > + goto job_unlock; > > > > > + } > > > > > } > > > > > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > > - dprintk("No output buffers available\n"); > > > > > - goto job_unlock; > > > > > + > > > > > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > > > > > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > > + dprintk("No output buffers available\n"); > > > > > + goto job_unlock; > > > > > + } > > > > > } > > > > > > > > src and dst would be referenced unitialized below if neither of the > > > > above ifs hits... > > > > > > > > Best regards, > > > > Tomasz > > > > > > > > > > > > > > m2m_ctx->new_frame = true; > > > > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > > > > > INIT_LIST_HEAD(&q_ctx->rdy_queue); > > > > > q_ctx->num_rdy = 0; > > > > > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > > > > > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > > > > > > > > > if (m2m_dev->curr_ctx == m2m_ctx) { > > > > > m2m_dev->curr_ctx = NULL; > > > > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > > > > > > > > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > > > > > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > > > > > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > > > > > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > > > > > spin_lock_init(&out_q_ctx->rdy_spinlock); > > > > > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > > > > > > > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > > > > > index d6c8eb2b5201..2342656e582d 100644 > > > > > --- a/include/media/v4l2-mem2mem.h > > > > > +++ b/include/media/v4l2-mem2mem.h > > > > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > > > > > * processed > > > > > * > > > > > * @q: pointer to struct &vb2_queue > > > > > - * @rdy_queue: List of V4L2 mem-to-mem queues > > > > > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > > > > > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > > > > > + * by user would be added to this list. > > > > > * @rdy_spinlock: spin lock to protect the struct usage > > > > > * @num_rdy: number of buffers ready to be processed > > > > > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > > > > > + * (or device's firmware). A buffer could only be in either > > > > > + * this list or @rdy_queue. > > > > > + * Driver may choose not to use this list while uses its own > > > > > + * private data to do this work. > > > > > * @buffered: is the queue buffered? > > > > > * > > > > > * Queue for buffers ready to be processed as soon as this > > > > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > > > > > struct list_head rdy_queue; > > > > > spinlock_t rdy_spinlock; > > > > > u8 num_rdy; > > > > > + struct list_head hw_queue; > > > > > bool buffered; > > > > > }; > > > > > > > > > > -- > > > > > 2.17.1 > > > > > > > > >
On 7/28/23 12:43, Tomasz Figa wrote: > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > On Fri, Jul 28, 2023 at 1:58 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >> >> Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : >>> On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >>>> >>>> Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : >>>>> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: >>>>>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >>>>>> >>>>>> Many drivers have to create its own buf_struct for a >>>>>> vb2_queue to track such a state. Also driver has to >>>>>> iterate over rdy_queue every times to find out a buffer >>>>>> which is not sent to hardware(or firmware), this new >>>>>> list just offers the driver a place to store the buffer >>>>>> that hardware(firmware) has acknowledged. >>>>>> >>>>>> One important advance about this list, it doesn't like >>>>>> rdy_queue which both bottom half of the user calling >>>>>> could operate it, while the v4l2 worker would as well. >>>>>> The v4l2 core could only operate this queue when its >>>>>> v4l2_context is not running, the driver would only >>>>>> access this new hw_queue in its own worker. >>>>> >>>>> Could you describe in what case such a list would be useful for a >>>>> mem2mem driver? >>>> >>>> Today all driver must track buffers that are "owned by the hardware". This is a >>>> concept dictated by the m2m framework and enforced through the ACTIVE flag. All >>>> buffers from this list must be mark as done/error/queued after streamoff of the >>>> respective queue in order to acknowledge that they are no longer in use by the >>>> HW. Not doing so will warn: >>>> >>>> videobuf2_common: driver bug: stop_streaming operation is leaving buf ... >>>> >>>> Though, there is no queue to easily iterate them. All driver endup having their >>>> own queue, or just leaving the buffers in the rdy_queue (which isn't better). >>>> >>> >>> Thanks for the explanation. I see how it could be useful now. >>> >>> Although I guess this is a problem specifically for hardware (or >>> firmware) which can internally queue more than 1 buffer, right? >>> Otherwise the current buffer could just stay at the top of the >>> rdy_queue until it's removed by the driver's completion handler, >>> timeout/error handler or context destruction. >> >> Correct, its only an issue when you need to process multiple src buffers before >> producing a dst buffer. If affects stateful decoder, stateful encoders and >> deinterlacer as far as I'm aware. > > Is it actually necessary to keep those buffers in a list in that case, though? > I can see that a deinterlacer would indeed need 2 input buffers to > perform the deinterlacing operation, but those would be just known to > the driver, since it's running the task currently. > For a stateful decoder, wouldn't it just consume the bitstream buffer > (producing something partially decoded to its own internal buffers) > and return it shortly? Display re-order. Firmware could do such batch work, taking a few bitstream buffer, then output a list graphics buffer in the display order also discard the usage of the non-display buffer when it is removed from dpb. Even in one input and one output mode, firmware need to do redo, let the driver know when a graphics buffer could be display, so firmware would usually hold the graphics buffer(frame) until its display time. Besides, I hate the driver occupied a large of memory without user's order. I would like to drop those internal buffers. > The most realistic scenario would be for stateful encoders which could > keep some input buffers as reference frames for further encoding, but > then would this patch actually work for them? It would make > __v4l2_m2m_try_queue never add the context to the job_queue if there > are some buffers in that hw_queue list. why? > > Maybe what I need here are actual patches modifying some existing > drivers. Randy, would you be able to include that in the next version? May not. The Synaptics VideoSmart is a secure video platform(DRM), I could release a snapshot of the driver when I got the permission, that would be after the official release of the SDK. But you may not be able to compile it because we have our own TEE interface(not optee), also running it because the trusted app would be signed with a per-device key. > Thanks. > > Best regards, > Tomasz > >> >> Nicolas >> >>> >>> Best regards, >>> Tomasz >>> >>>> Nicolas >>>>> >>>>>> >>>>>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >>>>>> --- >>>>>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >>>>>> include/media/v4l2-mem2mem.h | 10 +++++++++- >>>>>> 2 files changed, 26 insertions(+), 9 deletions(-) >>>>>> >>>>>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>> index c771aba42015..b4151147d5bd 100644 >>>>>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >>>>>> goto job_unlock; >>>>>> } >>>>>> >>>>>> - src = v4l2_m2m_next_src_buf(m2m_ctx); >>>>>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>>>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>>>> - dprintk("No input buffers available\n"); >>>>>> - goto job_unlock; >>>>>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >>>>>> + src = v4l2_m2m_next_src_buf(m2m_ctx); >>>>>> + >>>>>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>>>> + dprintk("No input buffers available\n"); >>>>>> + goto job_unlock; >>>>>> + } >>>>>> } >>>>>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>>>> - dprintk("No output buffers available\n"); >>>>>> - goto job_unlock; >>>>>> + >>>>>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >>>>>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>>>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>>>> + dprintk("No output buffers available\n"); >>>>>> + goto job_unlock; >>>>>> + } >>>>>> } >>>>> >>>>> src and dst would be referenced unitialized below if neither of the >>>>> above ifs hits... >>>>> >>>>> Best regards, >>>>> Tomasz >>>>> >>>>>> >>>>>> m2m_ctx->new_frame = true; >>>>>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >>>>>> INIT_LIST_HEAD(&q_ctx->rdy_queue); >>>>>> q_ctx->num_rdy = 0; >>>>>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >>>>>> + INIT_LIST_HEAD(&q_ctx->hw_queue); >>>>>> >>>>>> if (m2m_dev->curr_ctx == m2m_ctx) { >>>>>> m2m_dev->curr_ctx = NULL; >>>>>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >>>>>> >>>>>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >>>>>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >>>>>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >>>>>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >>>>>> spin_lock_init(&out_q_ctx->rdy_spinlock); >>>>>> spin_lock_init(&cap_q_ctx->rdy_spinlock); >>>>>> >>>>>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >>>>>> index d6c8eb2b5201..2342656e582d 100644 >>>>>> --- a/include/media/v4l2-mem2mem.h >>>>>> +++ b/include/media/v4l2-mem2mem.h >>>>>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >>>>>> * processed >>>>>> * >>>>>> * @q: pointer to struct &vb2_queue >>>>>> - * @rdy_queue: List of V4L2 mem-to-mem queues >>>>>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >>>>>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >>>>>> + * by user would be added to this list. >>>>>> * @rdy_spinlock: spin lock to protect the struct usage >>>>>> * @num_rdy: number of buffers ready to be processed >>>>>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >>>>>> + * (or device's firmware). A buffer could only be in either >>>>>> + * this list or @rdy_queue. >>>>>> + * Driver may choose not to use this list while uses its own >>>>>> + * private data to do this work. >>>>>> * @buffered: is the queue buffered? >>>>>> * >>>>>> * Queue for buffers ready to be processed as soon as this >>>>>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >>>>>> struct list_head rdy_queue; >>>>>> spinlock_t rdy_spinlock; >>>>>> u8 num_rdy; >>>>>> + struct list_head hw_queue; >>>>>> bool buffered; >>>>>> }; >>>>>> >>>>>> -- >>>>>> 2.17.1 >>>>>> >>>> >>
On Fri, Jul 28, 2023 at 4:09 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: > > > > On 7/28/23 12:43, Tomasz Figa wrote: > > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > > > > On Fri, Jul 28, 2023 at 1:58 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > >> > >> Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : > >>> On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > >>>> > >>>> Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > >>>>> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > >>>>>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > >>>>>> > >>>>>> Many drivers have to create its own buf_struct for a > >>>>>> vb2_queue to track such a state. Also driver has to > >>>>>> iterate over rdy_queue every times to find out a buffer > >>>>>> which is not sent to hardware(or firmware), this new > >>>>>> list just offers the driver a place to store the buffer > >>>>>> that hardware(firmware) has acknowledged. > >>>>>> > >>>>>> One important advance about this list, it doesn't like > >>>>>> rdy_queue which both bottom half of the user calling > >>>>>> could operate it, while the v4l2 worker would as well. > >>>>>> The v4l2 core could only operate this queue when its > >>>>>> v4l2_context is not running, the driver would only > >>>>>> access this new hw_queue in its own worker. > >>>>> > >>>>> Could you describe in what case such a list would be useful for a > >>>>> mem2mem driver? > >>>> > >>>> Today all driver must track buffers that are "owned by the hardware". This is a > >>>> concept dictated by the m2m framework and enforced through the ACTIVE flag. All > >>>> buffers from this list must be mark as done/error/queued after streamoff of the > >>>> respective queue in order to acknowledge that they are no longer in use by the > >>>> HW. Not doing so will warn: > >>>> > >>>> videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > >>>> > >>>> Though, there is no queue to easily iterate them. All driver endup having their > >>>> own queue, or just leaving the buffers in the rdy_queue (which isn't better). > >>>> > >>> > >>> Thanks for the explanation. I see how it could be useful now. > >>> > >>> Although I guess this is a problem specifically for hardware (or > >>> firmware) which can internally queue more than 1 buffer, right? > >>> Otherwise the current buffer could just stay at the top of the > >>> rdy_queue until it's removed by the driver's completion handler, > >>> timeout/error handler or context destruction. > >> > >> Correct, its only an issue when you need to process multiple src buffers before > >> producing a dst buffer. If affects stateful decoder, stateful encoders and > >> deinterlacer as far as I'm aware. > > > > Is it actually necessary to keep those buffers in a list in that case, though? > > I can see that a deinterlacer would indeed need 2 input buffers to > > perform the deinterlacing operation, but those would be just known to > > the driver, since it's running the task currently. > > For a stateful decoder, wouldn't it just consume the bitstream buffer > > (producing something partially decoded to its own internal buffers) > > and return it shortly? > Display re-order. Firmware could do such batch work, taking a few > bitstream buffer, then output a list graphics buffer in the display > order also discard the usage of the non-display buffer when it is > removed from dpb. > > Even in one input and one output mode, firmware need to do redo, let the > driver know when a graphics buffer could be display, so firmware would > usually hold the graphics buffer(frame) until its display time. > Okay, so that hold would be for frame buffers, not bitstream buffers, right? But yeah, I see that then it could hold onto those buffers until it's their turn to display and it could be a bigger number of frames, depending on the complexity of the codec. > Besides, I hate the driver occupied a large of memory without user's > order. I would like to drop those internal buffers. I think this is one reason to migrate to the stateless decoder design. > > The most realistic scenario would be for stateful encoders which could > > keep some input buffers as reference frames for further encoding, but > > then would this patch actually work for them? It would make > > __v4l2_m2m_try_queue never add the context to the job_queue if there > > are some buffers in that hw_queue list. > why? > > > > Maybe what I need here are actual patches modifying some existing > > drivers. Randy, would you be able to include that in the next version? > May not. The Synaptics VideoSmart is a secure video platform(DRM), I > could release a snapshot of the driver when I got the permission, that > would be after the official release of the SDK. > But you may not be able to compile it because we have our own TEE > interface(not optee), also running it because the trusted app would be > signed with a per-device key. Could you modify another, already existing driver then? > > Thanks. > > > > Best regards, > > Tomasz > > > >> > >> Nicolas > >> > >>> > >>> Best regards, > >>> Tomasz > >>> > >>>> Nicolas > >>>>> > >>>>>> > >>>>>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > >>>>>> --- > >>>>>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > >>>>>> include/media/v4l2-mem2mem.h | 10 +++++++++- > >>>>>> 2 files changed, 26 insertions(+), 9 deletions(-) > >>>>>> > >>>>>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>>>> index c771aba42015..b4151147d5bd 100644 > >>>>>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>>>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > >>>>>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > >>>>>> goto job_unlock; > >>>>>> } > >>>>>> > >>>>>> - src = v4l2_m2m_next_src_buf(m2m_ctx); > >>>>>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >>>>>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { > >>>>>> - dprintk("No input buffers available\n"); > >>>>>> - goto job_unlock; > >>>>>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > >>>>>> + src = v4l2_m2m_next_src_buf(m2m_ctx); > >>>>>> + > >>>>>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { > >>>>>> + dprintk("No input buffers available\n"); > >>>>>> + goto job_unlock; > >>>>>> + } > >>>>>> } > >>>>>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >>>>>> - dprintk("No output buffers available\n"); > >>>>>> - goto job_unlock; > >>>>>> + > >>>>>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > >>>>>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > >>>>>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > >>>>>> + dprintk("No output buffers available\n"); > >>>>>> + goto job_unlock; > >>>>>> + } > >>>>>> } > >>>>> > >>>>> src and dst would be referenced unitialized below if neither of the > >>>>> above ifs hits... > >>>>> > >>>>> Best regards, > >>>>> Tomasz > >>>>> > >>>>>> > >>>>>> m2m_ctx->new_frame = true; > >>>>>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > >>>>>> INIT_LIST_HEAD(&q_ctx->rdy_queue); > >>>>>> q_ctx->num_rdy = 0; > >>>>>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > >>>>>> + INIT_LIST_HEAD(&q_ctx->hw_queue); > >>>>>> > >>>>>> if (m2m_dev->curr_ctx == m2m_ctx) { > >>>>>> m2m_dev->curr_ctx = NULL; > >>>>>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > >>>>>> > >>>>>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > >>>>>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > >>>>>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > >>>>>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > >>>>>> spin_lock_init(&out_q_ctx->rdy_spinlock); > >>>>>> spin_lock_init(&cap_q_ctx->rdy_spinlock); > >>>>>> > >>>>>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > >>>>>> index d6c8eb2b5201..2342656e582d 100644 > >>>>>> --- a/include/media/v4l2-mem2mem.h > >>>>>> +++ b/include/media/v4l2-mem2mem.h > >>>>>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > >>>>>> * processed > >>>>>> * > >>>>>> * @q: pointer to struct &vb2_queue > >>>>>> - * @rdy_queue: List of V4L2 mem-to-mem queues > >>>>>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > >>>>>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued > >>>>>> + * by user would be added to this list. > >>>>>> * @rdy_spinlock: spin lock to protect the struct usage > >>>>>> * @num_rdy: number of buffers ready to be processed > >>>>>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware > >>>>>> + * (or device's firmware). A buffer could only be in either > >>>>>> + * this list or @rdy_queue. > >>>>>> + * Driver may choose not to use this list while uses its own > >>>>>> + * private data to do this work. > >>>>>> * @buffered: is the queue buffered? > >>>>>> * > >>>>>> * Queue for buffers ready to be processed as soon as this > >>>>>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > >>>>>> struct list_head rdy_queue; > >>>>>> spinlock_t rdy_spinlock; > >>>>>> u8 num_rdy; > >>>>>> + struct list_head hw_queue; > >>>>>> bool buffered; > >>>>>> }; > >>>>>> > >>>>>> -- > >>>>>> 2.17.1 > >>>>>> > >>>> > >> > > -- > Hsia-Jun(Randy) Li
On 7/28/23 15:26, Tomasz Figa wrote: > CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. > > > On Fri, Jul 28, 2023 at 4:09 PM Hsia-Jun Li <Randy.Li@synaptics.com> wrote: >> >> >> >> On 7/28/23 12:43, Tomasz Figa wrote: >>> CAUTION: Email originated externally, do not click links or open attachments unless you recognize the sender and know the content is safe. >>> >>> >>> On Fri, Jul 28, 2023 at 1:58 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >>>> >>>> Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : >>>>> On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: >>>>>> >>>>>> Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : >>>>>>> On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: >>>>>>>> From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> >>>>>>>> >>>>>>>> Many drivers have to create its own buf_struct for a >>>>>>>> vb2_queue to track such a state. Also driver has to >>>>>>>> iterate over rdy_queue every times to find out a buffer >>>>>>>> which is not sent to hardware(or firmware), this new >>>>>>>> list just offers the driver a place to store the buffer >>>>>>>> that hardware(firmware) has acknowledged. >>>>>>>> >>>>>>>> One important advance about this list, it doesn't like >>>>>>>> rdy_queue which both bottom half of the user calling >>>>>>>> could operate it, while the v4l2 worker would as well. >>>>>>>> The v4l2 core could only operate this queue when its >>>>>>>> v4l2_context is not running, the driver would only >>>>>>>> access this new hw_queue in its own worker. >>>>>>> >>>>>>> Could you describe in what case such a list would be useful for a >>>>>>> mem2mem driver? >>>>>> >>>>>> Today all driver must track buffers that are "owned by the hardware". This is a >>>>>> concept dictated by the m2m framework and enforced through the ACTIVE flag. All >>>>>> buffers from this list must be mark as done/error/queued after streamoff of the >>>>>> respective queue in order to acknowledge that they are no longer in use by the >>>>>> HW. Not doing so will warn: >>>>>> >>>>>> videobuf2_common: driver bug: stop_streaming operation is leaving buf ... >>>>>> >>>>>> Though, there is no queue to easily iterate them. All driver endup having their >>>>>> own queue, or just leaving the buffers in the rdy_queue (which isn't better). >>>>>> >>>>> >>>>> Thanks for the explanation. I see how it could be useful now. >>>>> >>>>> Although I guess this is a problem specifically for hardware (or >>>>> firmware) which can internally queue more than 1 buffer, right? >>>>> Otherwise the current buffer could just stay at the top of the >>>>> rdy_queue until it's removed by the driver's completion handler, >>>>> timeout/error handler or context destruction. >>>> >>>> Correct, its only an issue when you need to process multiple src buffers before >>>> producing a dst buffer. If affects stateful decoder, stateful encoders and >>>> deinterlacer as far as I'm aware. >>> >>> Is it actually necessary to keep those buffers in a list in that case, though? >>> I can see that a deinterlacer would indeed need 2 input buffers to >>> perform the deinterlacing operation, but those would be just known to >>> the driver, since it's running the task currently. >>> For a stateful decoder, wouldn't it just consume the bitstream buffer >>> (producing something partially decoded to its own internal buffers) >>> and return it shortly? >> Display re-order. Firmware could do such batch work, taking a few >> bitstream buffer, then output a list graphics buffer in the display >> order also discard the usage of the non-display buffer when it is >> removed from dpb. >> >> Even in one input and one output mode, firmware need to do redo, let the >> driver know when a graphics buffer could be display, so firmware would >> usually hold the graphics buffer(frame) until its display time. >> > > Okay, so that hold would be for frame buffers, not bitstream buffers, right? For the 1:1 model, decoder won't hold the input(OUTPUT queue) buffer usually. While for the VP9, we have a super frame and temporal unit packing for AV1 which break the current API requirement for an AU in a buffer. The hardware would trigger multiple work for that(that means multiple irqs ack for a usual devices). For the encoder, it is a different story. > But yeah, I see that then it could hold onto those buffers until it's > their turn to display and it could be a bigger number of frames, > depending on the complexity of the codec. > >> Besides, I hate the driver occupied a large of memory without user's >> order. I would like to drop those internal buffers. > > I think this is one reason to migrate to the stateless decoder design. > I didn't know such plan here. I don't think the current stateless API could export the reconstruction buffers for encoder or post-processing buffer for decoder to us. >>> The most realistic scenario would be for stateful encoders which could >>> keep some input buffers as reference frames for further encoding, but >>> then would this patch actually work for them? It would make >>> __v4l2_m2m_try_queue never add the context to the job_queue if there >>> are some buffers in that hw_queue list. >> why? >>> >>> Maybe what I need here are actual patches modifying some existing >>> drivers. Randy, would you be able to include that in the next version? >> May not. The Synaptics VideoSmart is a secure video platform(DRM), I >> could release a snapshot of the driver when I got the permission, that >> would be after the official release of the SDK. >> But you may not be able to compile it because we have our own TEE >> interface(not optee), also running it because the trusted app would be >> signed with a per-device key. > > Could you modify another, already existing driver then? > >>> Thanks. >>> >>> Best regards, >>> Tomasz >>> >>>> >>>> Nicolas >>>> >>>>> >>>>> Best regards, >>>>> Tomasz >>>>> >>>>>> Nicolas >>>>>>> >>>>>>>> >>>>>>>> Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> >>>>>>>> --- >>>>>>>> drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- >>>>>>>> include/media/v4l2-mem2mem.h | 10 +++++++++- >>>>>>>> 2 files changed, 26 insertions(+), 9 deletions(-) >>>>>>>> >>>>>>>> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>>>> index c771aba42015..b4151147d5bd 100644 >>>>>>>> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>>>> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c >>>>>>>> @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, >>>>>>>> goto job_unlock; >>>>>>>> } >>>>>>>> >>>>>>>> - src = v4l2_m2m_next_src_buf(m2m_ctx); >>>>>>>> - dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>>>>>> - if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>>>>>> - dprintk("No input buffers available\n"); >>>>>>>> - goto job_unlock; >>>>>>>> + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { >>>>>>>> + src = v4l2_m2m_next_src_buf(m2m_ctx); >>>>>>>> + >>>>>>>> + if (!src && !m2m_ctx->out_q_ctx.buffered) { >>>>>>>> + dprintk("No input buffers available\n"); >>>>>>>> + goto job_unlock; >>>>>>>> + } >>>>>>>> } >>>>>>>> - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>>>>>> - dprintk("No output buffers available\n"); >>>>>>>> - goto job_unlock; >>>>>>>> + >>>>>>>> + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { >>>>>>>> + dst = v4l2_m2m_next_dst_buf(m2m_ctx); >>>>>>>> + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { >>>>>>>> + dprintk("No output buffers available\n"); >>>>>>>> + goto job_unlock; >>>>>>>> + } >>>>>>>> } >>>>>>> >>>>>>> src and dst would be referenced unitialized below if neither of the >>>>>>> above ifs hits... >>>>>>> >>>>>>> Best regards, >>>>>>> Tomasz >>>>>>> >>>>>>>> >>>>>>>> m2m_ctx->new_frame = true; >>>>>>>> @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, >>>>>>>> INIT_LIST_HEAD(&q_ctx->rdy_queue); >>>>>>>> q_ctx->num_rdy = 0; >>>>>>>> spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); >>>>>>>> + INIT_LIST_HEAD(&q_ctx->hw_queue); >>>>>>>> >>>>>>>> if (m2m_dev->curr_ctx == m2m_ctx) { >>>>>>>> m2m_dev->curr_ctx = NULL; >>>>>>>> @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, >>>>>>>> >>>>>>>> INIT_LIST_HEAD(&out_q_ctx->rdy_queue); >>>>>>>> INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); >>>>>>>> + INIT_LIST_HEAD(&out_q_ctx->hw_queue); >>>>>>>> + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); >>>>>>>> spin_lock_init(&out_q_ctx->rdy_spinlock); >>>>>>>> spin_lock_init(&cap_q_ctx->rdy_spinlock); >>>>>>>> >>>>>>>> diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h >>>>>>>> index d6c8eb2b5201..2342656e582d 100644 >>>>>>>> --- a/include/media/v4l2-mem2mem.h >>>>>>>> +++ b/include/media/v4l2-mem2mem.h >>>>>>>> @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; >>>>>>>> * processed >>>>>>>> * >>>>>>>> * @q: pointer to struct &vb2_queue >>>>>>>> - * @rdy_queue: List of V4L2 mem-to-mem queues >>>>>>>> + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is >>>>>>>> + * called in struct vb2_ops->buf_queue(), the buffer enqueued >>>>>>>> + * by user would be added to this list. >>>>>>>> * @rdy_spinlock: spin lock to protect the struct usage >>>>>>>> * @num_rdy: number of buffers ready to be processed >>>>>>>> + * @hw_queue: A list for tracking the buffer is occupied by the hardware >>>>>>>> + * (or device's firmware). A buffer could only be in either >>>>>>>> + * this list or @rdy_queue. >>>>>>>> + * Driver may choose not to use this list while uses its own >>>>>>>> + * private data to do this work. >>>>>>>> * @buffered: is the queue buffered? >>>>>>>> * >>>>>>>> * Queue for buffers ready to be processed as soon as this >>>>>>>> @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { >>>>>>>> struct list_head rdy_queue; >>>>>>>> spinlock_t rdy_spinlock; >>>>>>>> u8 num_rdy; >>>>>>>> + struct list_head hw_queue; >>>>>>>> bool buffered; >>>>>>>> }; >>>>>>>> >>>>>>>> -- >>>>>>>> 2.17.1 >>>>>>>> >>>>>> >>>> >> >> -- >> Hsia-Jun(Randy) Li
Le vendredi 28 juillet 2023 à 13:43 +0900, Tomasz Figa a écrit : > On Fri, Jul 28, 2023 at 1:58 AM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > Le jeudi 27 juillet 2023 à 16:43 +0900, Tomasz Figa a écrit : > > > On Mon, Jul 17, 2023 at 11:07 PM Nicolas Dufresne <nicolas@ndufresne.ca> wrote: > > > > > > > > Le mercredi 12 juillet 2023 à 09:33 +0000, Tomasz Figa a écrit : > > > > > On Tue, Jul 04, 2023 at 12:00:38PM +0800, Hsia-Jun Li wrote: > > > > > > From: "Hsia-Jun(Randy) Li" <randy.li@synaptics.com> > > > > > > > > > > > > Many drivers have to create its own buf_struct for a > > > > > > vb2_queue to track such a state. Also driver has to > > > > > > iterate over rdy_queue every times to find out a buffer > > > > > > which is not sent to hardware(or firmware), this new > > > > > > list just offers the driver a place to store the buffer > > > > > > that hardware(firmware) has acknowledged. > > > > > > > > > > > > One important advance about this list, it doesn't like > > > > > > rdy_queue which both bottom half of the user calling > > > > > > could operate it, while the v4l2 worker would as well. > > > > > > The v4l2 core could only operate this queue when its > > > > > > v4l2_context is not running, the driver would only > > > > > > access this new hw_queue in its own worker. > > > > > > > > > > Could you describe in what case such a list would be useful for a > > > > > mem2mem driver? > > > > > > > > Today all driver must track buffers that are "owned by the hardware". This is a > > > > concept dictated by the m2m framework and enforced through the ACTIVE flag. All > > > > buffers from this list must be mark as done/error/queued after streamoff of the > > > > respective queue in order to acknowledge that they are no longer in use by the > > > > HW. Not doing so will warn: > > > > > > > > videobuf2_common: driver bug: stop_streaming operation is leaving buf ... > > > > > > > > Though, there is no queue to easily iterate them. All driver endup having their > > > > own queue, or just leaving the buffers in the rdy_queue (which isn't better). > > > > > > > > > > Thanks for the explanation. I see how it could be useful now. > > > > > > Although I guess this is a problem specifically for hardware (or > > > firmware) which can internally queue more than 1 buffer, right? > > > Otherwise the current buffer could just stay at the top of the > > > rdy_queue until it's removed by the driver's completion handler, > > > timeout/error handler or context destruction. > > > > Correct, its only an issue when you need to process multiple src buffers before > > producing a dst buffer. If affects stateful decoder, stateful encoders and > > deinterlacer as far as I'm aware. > > Is it actually necessary to keep those buffers in a list in that case, though? > I can see that a deinterlacer would indeed need 2 input buffers to > perform the deinterlacing operation, but those would be just known to > the driver, since it's running the task currently. > For a stateful decoder, wouldn't it just consume the bitstream buffer > (producing something partially decoded to its own internal buffers) > and return it shortly? In practice, in stateful decoder, we pace the consumption of input buffers, otherwise we just endup consuming the entire video into a ring buffer, which makes operation like seeks quite heavy and cause CPU spikes. That being said, I'm not sure how useful a list would be for bitstream buffers. At the moment, in my current work, I'm leaving buffers in the ready queue, and just tagging the one I have already copied into the ring buffer. And I remove them from the ready list, when the related data has been decoded. This is when I actually copy the timestamp from src to dst buffer. So in short, I don't use an extra list, but use some marking on the buffers though, to remember which one have already been copied. This is specific to ring buffer based codecs of course. The one where a second list helps is for display picture buffers. When a buffer has been filled, if its in the ready queue, I currently remove that buffer and put it in a custom list. It will then be removed when/if the firmware decides to display it. It may also never be displayed, and reused by the firmware. I short, these are the frame "owned" by the firmware and containing valid pixels. The rdy list contains free pictures buffers, and the pixels are undefined. Maybe, and I'm ready to try, I could also leave them in ready queue and opt for marking and a counter. As I'm using a job_ready() function, its my driver that decides if a device_run() should be executed or not. So what matters is basically if there is a free buffer for a new decode operation, and a counter of filled but not displayed buffer could probably do that. > The most realistic scenario would be for stateful encoders which could > keep some input buffers as reference frames for further encoding, but > then would this patch actually work for them? It would make > __v4l2_m2m_try_queue never add the context to the job_queue if there > are some buffers in that hw_queue list. Encoders have 3 set of buffers, despite m2m having two queues. OUTPUT buffers are the pictures, there is a set of internal reconstruction buffers, and finally the CAPTURE buffers are the bitstream. Bitstream buffers are subject to reordering, so conceptually the firmware holds more then 1, and reconstruction buffers are completely hidden. > > Maybe what I need here are actual patches modifying some existing > drivers. Randy, would you be able to include that in the next version? > Thanks. Agreed. > > Best regards, > Tomasz > > > > > Nicolas > > > > > > > > Best regards, > > > Tomasz > > > > > > > Nicolas > > > > > > > > > > > > > > > > > Signed-off-by: Hsia-Jun(Randy) Li <randy.li@synaptics.com> > > > > > > --- > > > > > > drivers/media/v4l2-core/v4l2-mem2mem.c | 25 +++++++++++++++++-------- > > > > > > include/media/v4l2-mem2mem.h | 10 +++++++++- > > > > > > 2 files changed, 26 insertions(+), 9 deletions(-) > > > > > > > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > > index c771aba42015..b4151147d5bd 100644 > > > > > > --- a/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > > +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c > > > > > > @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, > > > > > > goto job_unlock; > > > > > > } > > > > > > > > > > > > - src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > > > - dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > > > - if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > > > - dprintk("No input buffers available\n"); > > > > > > - goto job_unlock; > > > > > > + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { > > > > > > + src = v4l2_m2m_next_src_buf(m2m_ctx); > > > > > > + > > > > > > + if (!src && !m2m_ctx->out_q_ctx.buffered) { > > > > > > + dprintk("No input buffers available\n"); > > > > > > + goto job_unlock; > > > > > > + } > > > > > > } > > > > > > - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > > > - dprintk("No output buffers available\n"); > > > > > > - goto job_unlock; > > > > > > + > > > > > > + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { > > > > > > + dst = v4l2_m2m_next_dst_buf(m2m_ctx); > > > > > > + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { > > > > > > + dprintk("No output buffers available\n"); > > > > > > + goto job_unlock; > > > > > > + } > > > > > > } > > > > > > > > > > src and dst would be referenced unitialized below if neither of the > > > > > above ifs hits... > > > > > > > > > > Best regards, > > > > > Tomasz > > > > > > > > > > > > > > > > > m2m_ctx->new_frame = true; > > > > > > @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, > > > > > > INIT_LIST_HEAD(&q_ctx->rdy_queue); > > > > > > q_ctx->num_rdy = 0; > > > > > > spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); > > > > > > + INIT_LIST_HEAD(&q_ctx->hw_queue); > > > > > > > > > > > > if (m2m_dev->curr_ctx == m2m_ctx) { > > > > > > m2m_dev->curr_ctx = NULL; > > > > > > @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, > > > > > > > > > > > > INIT_LIST_HEAD(&out_q_ctx->rdy_queue); > > > > > > INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); > > > > > > + INIT_LIST_HEAD(&out_q_ctx->hw_queue); > > > > > > + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); > > > > > > spin_lock_init(&out_q_ctx->rdy_spinlock); > > > > > > spin_lock_init(&cap_q_ctx->rdy_spinlock); > > > > > > > > > > > > diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h > > > > > > index d6c8eb2b5201..2342656e582d 100644 > > > > > > --- a/include/media/v4l2-mem2mem.h > > > > > > +++ b/include/media/v4l2-mem2mem.h > > > > > > @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; > > > > > > * processed > > > > > > * > > > > > > * @q: pointer to struct &vb2_queue > > > > > > - * @rdy_queue: List of V4L2 mem-to-mem queues > > > > > > + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is > > > > > > + * called in struct vb2_ops->buf_queue(), the buffer enqueued > > > > > > + * by user would be added to this list. > > > > > > * @rdy_spinlock: spin lock to protect the struct usage > > > > > > * @num_rdy: number of buffers ready to be processed > > > > > > + * @hw_queue: A list for tracking the buffer is occupied by the hardware > > > > > > + * (or device's firmware). A buffer could only be in either > > > > > > + * this list or @rdy_queue. > > > > > > + * Driver may choose not to use this list while uses its own > > > > > > + * private data to do this work. > > > > > > * @buffered: is the queue buffered? > > > > > > * > > > > > > * Queue for buffers ready to be processed as soon as this > > > > > > @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { > > > > > > struct list_head rdy_queue; > > > > > > spinlock_t rdy_spinlock; > > > > > > u8 num_rdy; > > > > > > + struct list_head hw_queue; > > > > > > bool buffered; > > > > > > }; > > > > > > > > > > > > -- > > > > > > 2.17.1 > > > > > > > > > > > >
Le vendredi 28 juillet 2023 à 15:37 +0800, Hsia-Jun Li a écrit : > > I think this is one reason to migrate to the stateless decoder design. > > > I didn't know such plan here. I don't think the current stateless API > could export the reconstruction buffers for encoder or post-processing > buffer for decoder to us. Someone suggested introduce auxiliary queues in our meeting in Lyon a while ago, but I bet everyone got too busy with finalizing APIs, fixing fluster tests etc. The suggestion felt like it would be possible to add it after the fact. This was also being discussed in the context of supporting multi-scalers (standalone our inline with the codec, like VC8000D+). It could also cover for primary and secondary buffers, along with encoder primary, and reconstruction buffers, but also auxiliary reference data. This would also be needed to properly support Vulkan Video fwiw, and could also help with a transition to DMABuf Heaps and memory accounting. I've also had corridor discussion around having multi-instance media constroller devices. It wasn't clear how to bind the media instance to the video node instances, but assuming there is a way, it would be a tad more flexible (but massively more complex). Nicolas
On 2023/7/29 00:19, Nicolas Dufresne wrote: > Le vendredi 28 juillet 2023 à 15:37 +0800, Hsia-Jun Li a écrit : >>> I think this is one reason to migrate to the stateless decoder design. >>> >> I didn't know such plan here. I don't think the current stateless API >> could export the reconstruction buffers for encoder or post-processing >> buffer for decoder to us. > Someone suggested introduce auxiliary queues in our meeting in Lyon a while ago, > but I bet everyone got too busy with finalizing APIs, fixing fluster tests etc. > The suggestion felt like it would be possible to add it after the fact. This was > also being discussed in the context of supporting multi-scalers (standalone our > inline with the codec, like VC8000D+). It could also cover for primary and > secondary buffers, along with encoder primary, and reconstruction buffers, but > also auxiliary reference data. This would also be needed to properly support > Vulkan Video fwiw, and could also help with a transition to DMABuf Heaps and > memory accounting. > > I've also had corridor discussion around having multi-instance media constroller > devices. It wasn't clear how to bind the media instance to the video node > instances, but assuming there is a way, it would be a tad more flexible (but > massively more complex). I think we should answer to those questions before we decided what we want: A. Should a queue only has the buffers for the same format and sizes? B. How does an application handle those drivers requests additional queue? C. How to sync multiple buffers in a v4l2 job. I asked the same question A when I discuss this with media: v4l2: Add DELETE_BUF ioctl. If we would not add extra queue here, how does the driver filter out the most proper buffer for the current hardware output(CAPTURE) buffer. If we have multiple queues in a direction, how to make driver select between them? The question B is the debt we made, some applications have gotten used to the case they can't control the lifetime of reconstruction buffer in encoding or turn the post-processing off when the display pipeline could support tile format output. We know allow the userspace could decide where we allocate those buffers, but could the userspace decided not to handle their lifetime? The question C may more be more related to the complex case like camera senor and ISP. With this auxiliary queue, multiple video nodes are not necessary anymore. But ISP may not request all the data finish its path, ex. the ISP are not satisfied with the focus point that its senor detected or the light level, it may just drop the image data then shot again. Also the poll event could only tell us which direction could do the dequeue/enqueue work, it can't tell us which queue is ready. Should we introduce something likes sync point(fence fd) here? We may lead way to V4L3 as Tomasz suggested although I don't want to take the risk to be. If we would make a V4L3 like thing, we have better to decide it correct and could handle any future problem. > > Nicolas >
Hi Randy, Le vendredi 04 août 2023 à 00:16 +0800, Randy Li a écrit : > On 2023/7/29 00:19, Nicolas Dufresne wrote: > > Le vendredi 28 juillet 2023 à 15:37 +0800, Hsia-Jun Li a écrit : > > > > I think this is one reason to migrate to the stateless decoder design. > > > > > > > I didn't know such plan here. I don't think the current stateless API > > > could export the reconstruction buffers for encoder or post-processing > > > buffer for decoder to us. > > Someone suggested introduce auxiliary queues in our meeting in Lyon a while ago, > > but I bet everyone got too busy with finalizing APIs, fixing fluster tests etc. > > The suggestion felt like it would be possible to add it after the fact. This was > > also being discussed in the context of supporting multi-scalers (standalone our > > inline with the codec, like VC8000D+). It could also cover for primary and > > secondary buffers, along with encoder primary, and reconstruction buffers, but > > also auxiliary reference data. This would also be needed to properly support > > Vulkan Video fwiw, and could also help with a transition to DMABuf Heaps and > > memory accounting. > > > > I've also had corridor discussion around having multi-instance media constroller > > devices. It wasn't clear how to bind the media instance to the video node > > instances, but assuming there is a way, it would be a tad more flexible (but > > massively more complex). > > I think we should answer to those questions before we decided what we want: > > A. Should a queue only has the buffers for the same format and sizes? I initially started answering these, but ended up concluding this is more some sort of personal notes. I believe the discussion is diverging. Remember that in an existing API, one cannot fix all theoretical issues in one go. In order to move forward, you have to tackle very specific use case and find a way forward. If you are to break compatibility as much as you suggest, you'd rather look into writing a new API. [...]
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c index c771aba42015..b4151147d5bd 100644 --- a/drivers/media/v4l2-core/v4l2-mem2mem.c +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c @@ -321,15 +321,21 @@ static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, goto job_unlock; } - src = v4l2_m2m_next_src_buf(m2m_ctx); - dst = v4l2_m2m_next_dst_buf(m2m_ctx); - if (!src && !m2m_ctx->out_q_ctx.buffered) { - dprintk("No input buffers available\n"); - goto job_unlock; + if (list_empty(&m2m_ctx->out_q_ctx.hw_queue)) { + src = v4l2_m2m_next_src_buf(m2m_ctx); + + if (!src && !m2m_ctx->out_q_ctx.buffered) { + dprintk("No input buffers available\n"); + goto job_unlock; + } } - if (!dst && !m2m_ctx->cap_q_ctx.buffered) { - dprintk("No output buffers available\n"); - goto job_unlock; + + if (list_empty(&m2m_ctx->cap_q_ctx.hw_queue)) { + dst = v4l2_m2m_next_dst_buf(m2m_ctx); + if (!dst && !m2m_ctx->cap_q_ctx.buffered) { + dprintk("No output buffers available\n"); + goto job_unlock; + } } m2m_ctx->new_frame = true; @@ -896,6 +902,7 @@ int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, INIT_LIST_HEAD(&q_ctx->rdy_queue); q_ctx->num_rdy = 0; spin_unlock_irqrestore(&q_ctx->rdy_spinlock, flags); + INIT_LIST_HEAD(&q_ctx->hw_queue); if (m2m_dev->curr_ctx == m2m_ctx) { m2m_dev->curr_ctx = NULL; @@ -1234,6 +1241,8 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, INIT_LIST_HEAD(&out_q_ctx->rdy_queue); INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); + INIT_LIST_HEAD(&out_q_ctx->hw_queue); + INIT_LIST_HEAD(&cap_q_ctx->hw_queue); spin_lock_init(&out_q_ctx->rdy_spinlock); spin_lock_init(&cap_q_ctx->rdy_spinlock); diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index d6c8eb2b5201..2342656e582d 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -53,9 +53,16 @@ struct v4l2_m2m_dev; * processed * * @q: pointer to struct &vb2_queue - * @rdy_queue: List of V4L2 mem-to-mem queues + * @rdy_queue: List of V4L2 mem-to-mem queues. If v4l2_m2m_buf_queue() is + * called in struct vb2_ops->buf_queue(), the buffer enqueued + * by user would be added to this list. * @rdy_spinlock: spin lock to protect the struct usage * @num_rdy: number of buffers ready to be processed + * @hw_queue: A list for tracking the buffer is occupied by the hardware + * (or device's firmware). A buffer could only be in either + * this list or @rdy_queue. + * Driver may choose not to use this list while uses its own + * private data to do this work. * @buffered: is the queue buffered? * * Queue for buffers ready to be processed as soon as this @@ -68,6 +75,7 @@ struct v4l2_m2m_queue_ctx { struct list_head rdy_queue; spinlock_t rdy_spinlock; u8 num_rdy; + struct list_head hw_queue; bool buffered; };