diff mbox series

[RFC,v1,12/21] irqchip/riscv-intc: Use swnode framework to create fwnode

Message ID 20230803175916.3174453-13-sunilvl@ventanamicro.com (mailing list archive)
State New, archived
Headers show
Series RISC-V: ACPI: Add external interrupt controller support | expand

Commit Message

Sunil V L Aug. 3, 2023, 5:59 p.m. UTC 
By using swnode framework, all data from ACPI tables can
be populated as properties of the swnode. This simplifies
the driver code and removes the need for ACPI vs DT checks.
Use this framework for RISC-V INTC driver.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
---
 Documentation/riscv/acpi.rst     | 21 +++++++++++++++
 arch/riscv/include/asm/acpi.h    |  1 +
 drivers/acpi/riscv/Makefile      |  2 +-
 drivers/acpi/riscv/irqchip.c     | 46 ++++++++++++++++++++++++++++++++
 drivers/irqchip/irq-riscv-intc.c | 12 ++++-----
 5 files changed, 75 insertions(+), 7 deletions(-)
 create mode 100644 drivers/acpi/riscv/irqchip.c

Comments

Conor Dooley Aug. 8, 2023, 8:31 a.m. UTC | #1 
Hey Sunil,

On Thu, Aug 03, 2023 at 11:29:07PM +0530, Sunil V L wrote:
> By using swnode framework, all data from ACPI tables can
> be populated as properties of the swnode. This simplifies
> the driver code and removes the need for ACPI vs DT checks.
> Use this framework for RISC-V INTC driver.

btw, you are permitted to use more than 60 characters in a commit
message...

> 
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> ---
>  Documentation/riscv/acpi.rst     | 21 +++++++++++++++
>  arch/riscv/include/asm/acpi.h    |  1 +
>  drivers/acpi/riscv/Makefile      |  2 +-
>  drivers/acpi/riscv/irqchip.c     | 46 ++++++++++++++++++++++++++++++++
>  drivers/irqchip/irq-riscv-intc.c | 12 ++++-----
>  5 files changed, 75 insertions(+), 7 deletions(-)
>  create mode 100644 drivers/acpi/riscv/irqchip.c
> 
> diff --git a/Documentation/riscv/acpi.rst b/Documentation/riscv/acpi.rst
> index 9870a282815b..e2406546bc16 100644
> --- a/Documentation/riscv/acpi.rst
> +++ b/Documentation/riscv/acpi.rst
> @@ -8,3 +8,24 @@ The ISA string parsing rules for ACPI are defined by `Version ASCIIDOC
>  Conversion, 12/2022 of the RISC-V specifications, as defined by tag
>  "riscv-isa-release-1239329-2023-05-23" (commit 1239329
>  ) <https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-1239329-2023-05-23>`_
> +
> +Interrupt Controller Drivers
> +=======
> +
> +ACPI drivers for RISC-V interrupt controllers use software node framework to
> +create the fwnode for the interrupt controllers. Below properties are
> +additionally required for some firmware nodes apart from the properties
> +defined by the device tree bindings for these interrupt controllers. The
> +properties are created using the data in MADT table.

I don't really understand this text, specifically what you are getting
at w/ the dependency on devicetree properties. What exactly does "apart
from the properties defined by the devicetree bindings" mean?

Is there prior art for this kind of "ACPI needs swnodes that look
vaguely similar to devicetree" for other interrupt controllers?

Thanks,
Conor.

> +1) RISC-V Interrupt Controller (INTC)
> +-----------
> +``hartid`` - Hart ID of the hart this interrupt controller belongs to.
> +
> +``riscv,imsic-addr`` - Physical base address of the Incoming MSI Controller
> +(IMSIC) MMIO region of this hart.
> +
> +``riscv,imsic-size`` - Size in bytes of the IMSIC MMIO region of this hart.
> +
> +``riscv,ext-intc-id`` - The unique ID of the external interrupts connected
> +to this hart.
> diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> index 0c4e8b35103e..0ac2df2dd194 100644
> --- a/arch/riscv/include/asm/acpi.h
> +++ b/arch/riscv/include/asm/acpi.h
> @@ -68,6 +68,7 @@ int acpi_get_riscv_isa(struct acpi_table_header *table,
>  static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
>  int acpi_get_cbo_block_size(struct acpi_table_header *table, unsigned int cpu, u32 *cbom_size,
>  			    u32 *cboz_size, u32 *cbop_size);
> +struct fwnode_handle *acpi_rintc_create_irqchip_fwnode(struct acpi_madt_rintc *rintc);
>  #else
>  static inline void acpi_init_rintc_map(void) { }
>  static inline struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
> diff --git a/drivers/acpi/riscv/Makefile b/drivers/acpi/riscv/Makefile
> index 8b3b126e0b94..8b664190d172 100644
> --- a/drivers/acpi/riscv/Makefile
> +++ b/drivers/acpi/riscv/Makefile
> @@ -1,2 +1,2 @@
>  # SPDX-License-Identifier: GPL-2.0-only
> -obj-y 	+= rhct.o
> +obj-y 	+= rhct.o irqchip.o
> diff --git a/drivers/acpi/riscv/irqchip.c b/drivers/acpi/riscv/irqchip.c
> new file mode 100644
> index 000000000000..36f066a2cad5
> --- /dev/null
> +++ b/drivers/acpi/riscv/irqchip.c
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2023, Ventana Micro Systems Inc
> + *	Author: Sunil V L <sunilvl@ventanamicro.com>
> + *
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/fwnode.h>
> +#include <linux/irqdomain.h>
> +#include <linux/list.h>
> +#include <linux/property.h>
> +
> +struct riscv_irqchip_list {
> +	struct fwnode_handle *fwnode;
> +	struct list_head list;
> +};
> +
> +LIST_HEAD(rintc_list);
> +
> +struct fwnode_handle *acpi_rintc_create_irqchip_fwnode(struct acpi_madt_rintc *rintc)
> +{
> +	struct property_entry props[6] = {};
> +	struct fwnode_handle *fwnode;
> +	struct riscv_irqchip_list *rintc_element;
> +
> +	props[0] = PROPERTY_ENTRY_U64("hartid", rintc->hart_id);
> +	props[1] = PROPERTY_ENTRY_U32("riscv,ext-intc-id", rintc->ext_intc_id);
> +	props[2] = PROPERTY_ENTRY_U64("riscv,imsic-addr", rintc->imsic_addr);
> +	props[3] = PROPERTY_ENTRY_U32("riscv,imsic-size", rintc->imsic_size);
> +	props[4] = PROPERTY_ENTRY_U32("#interrupt-cells", 1);
> +
> +	fwnode = fwnode_create_software_node_early(props, NULL);
> +	if (fwnode) {
> +		rintc_element = kzalloc(sizeof(*rintc_element), GFP_KERNEL);
> +		if (!rintc_element) {
> +			fwnode_remove_software_node(fwnode);
> +			return NULL;
> +		}
> +
> +		rintc_element->fwnode = fwnode;
> +		list_add_tail(&rintc_element->list, &rintc_list);
> +	}
> +
> +	return fwnode;
> +}
> diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> index 1a0fc87152c5..1ef9cada1ed3 100644
> --- a/drivers/irqchip/irq-riscv-intc.c
> +++ b/drivers/irqchip/irq-riscv-intc.c
> @@ -203,6 +203,12 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
>  
>  	rintc = (struct acpi_madt_rintc *)header;
>  
> +	fn = acpi_rintc_create_irqchip_fwnode(rintc);
> +	if (!fn) {
> +		pr_err("unable to create INTC FW node\n");
> +		return -ENOMEM;
> +	}
> +
>  	/*
>  	 * The ACPI MADT will have one INTC for each CPU (or HART)
>  	 * so riscv_intc_acpi_init() function will be called once
> @@ -212,12 +218,6 @@ static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
>  	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
>  		return 0;
>  
> -	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
> -	if (!fn) {
> -		pr_err("unable to allocate INTC FW node\n");
> -		return -ENOMEM;
> -	}
> -
>  	return riscv_intc_init_common(fn);
>  }
>  
> -- 
> 2.39.2
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Sunil V L Aug. 9, 2023, 5:49 a.m. UTC | #2 
On Tue, Aug 08, 2023 at 09:31:49AM +0100, Conor Dooley wrote:
> Hey Sunil,
> 
> On Thu, Aug 03, 2023 at 11:29:07PM +0530, Sunil V L wrote:
> > By using swnode framework, all data from ACPI tables can
> > be populated as properties of the swnode. This simplifies
> > the driver code and removes the need for ACPI vs DT checks.
> > Use this framework for RISC-V INTC driver.
> 
> btw, you are permitted to use more than 60 characters in a commit
> message...
> 
Sure.

> > 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > ---
> >  Documentation/riscv/acpi.rst     | 21 +++++++++++++++
> >  arch/riscv/include/asm/acpi.h    |  1 +
> >  drivers/acpi/riscv/Makefile      |  2 +-
> >  drivers/acpi/riscv/irqchip.c     | 46 ++++++++++++++++++++++++++++++++
> >  drivers/irqchip/irq-riscv-intc.c | 12 ++++-----
> >  5 files changed, 75 insertions(+), 7 deletions(-)
> >  create mode 100644 drivers/acpi/riscv/irqchip.c
> > 
> > diff --git a/Documentation/riscv/acpi.rst b/Documentation/riscv/acpi.rst
> > index 9870a282815b..e2406546bc16 100644
> > --- a/Documentation/riscv/acpi.rst
> > +++ b/Documentation/riscv/acpi.rst
> > @@ -8,3 +8,24 @@ The ISA string parsing rules for ACPI are defined by `Version ASCIIDOC
> >  Conversion, 12/2022 of the RISC-V specifications, as defined by tag
> >  "riscv-isa-release-1239329-2023-05-23" (commit 1239329
> >  ) <https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-1239329-2023-05-23>`_
> > +
> > +Interrupt Controller Drivers
> > +=======
> > +
> > +ACPI drivers for RISC-V interrupt controllers use software node framework to
> > +create the fwnode for the interrupt controllers. Below properties are
> > +additionally required for some firmware nodes apart from the properties
> > +defined by the device tree bindings for these interrupt controllers. The
> > +properties are created using the data in MADT table.
> 
> I don't really understand this text, specifically what you are getting
> at w/ the dependency on devicetree properties. What exactly does "apart
> from the properties defined by the devicetree bindings" mean?
> 
> Is there prior art for this kind of "ACPI needs swnodes that look
> vaguely similar to devicetree" for other interrupt controllers?
>
Never mind. This will not be required with Marc's feedback.

Thanks,
Sunil
diff mbox series

Patch

diff --git a/Documentation/riscv/acpi.rst b/Documentation/riscv/acpi.rst
index 9870a282815b..e2406546bc16 100644
--- a/Documentation/riscv/acpi.rst
+++ b/Documentation/riscv/acpi.rst
@@ -8,3 +8,24 @@  The ISA string parsing rules for ACPI are defined by `Version ASCIIDOC
 Conversion, 12/2022 of the RISC-V specifications, as defined by tag
 "riscv-isa-release-1239329-2023-05-23" (commit 1239329
 ) <https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-1239329-2023-05-23>`_
+
+Interrupt Controller Drivers
+=======
+
+ACPI drivers for RISC-V interrupt controllers use software node framework to
+create the fwnode for the interrupt controllers. Below properties are
+additionally required for some firmware nodes apart from the properties
+defined by the device tree bindings for these interrupt controllers. The
+properties are created using the data in MADT table.
+
+1) RISC-V Interrupt Controller (INTC)
+-----------
+``hartid`` - Hart ID of the hart this interrupt controller belongs to.
+
+``riscv,imsic-addr`` - Physical base address of the Incoming MSI Controller
+(IMSIC) MMIO region of this hart.
+
+``riscv,imsic-size`` - Size in bytes of the IMSIC MMIO region of this hart.
+
+``riscv,ext-intc-id`` - The unique ID of the external interrupts connected
+to this hart.
diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
index 0c4e8b35103e..0ac2df2dd194 100644
--- a/arch/riscv/include/asm/acpi.h
+++ b/arch/riscv/include/asm/acpi.h
@@ -68,6 +68,7 @@  int acpi_get_riscv_isa(struct acpi_table_header *table,
 static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
 int acpi_get_cbo_block_size(struct acpi_table_header *table, unsigned int cpu, u32 *cbom_size,
 			    u32 *cboz_size, u32 *cbop_size);
+struct fwnode_handle *acpi_rintc_create_irqchip_fwnode(struct acpi_madt_rintc *rintc);
 #else
 static inline void acpi_init_rintc_map(void) { }
 static inline struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
diff --git a/drivers/acpi/riscv/Makefile b/drivers/acpi/riscv/Makefile
index 8b3b126e0b94..8b664190d172 100644
--- a/drivers/acpi/riscv/Makefile
+++ b/drivers/acpi/riscv/Makefile
@@ -1,2 +1,2 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
-obj-y 	+= rhct.o
+obj-y 	+= rhct.o irqchip.o
diff --git a/drivers/acpi/riscv/irqchip.c b/drivers/acpi/riscv/irqchip.c
new file mode 100644
index 000000000000..36f066a2cad5
--- /dev/null
+++ b/drivers/acpi/riscv/irqchip.c
@@ -0,0 +1,46 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Ventana Micro Systems Inc
+ *	Author: Sunil V L <sunilvl@ventanamicro.com>
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/fwnode.h>
+#include <linux/irqdomain.h>
+#include <linux/list.h>
+#include <linux/property.h>
+
+struct riscv_irqchip_list {
+	struct fwnode_handle *fwnode;
+	struct list_head list;
+};
+
+LIST_HEAD(rintc_list);
+
+struct fwnode_handle *acpi_rintc_create_irqchip_fwnode(struct acpi_madt_rintc *rintc)
+{
+	struct property_entry props[6] = {};
+	struct fwnode_handle *fwnode;
+	struct riscv_irqchip_list *rintc_element;
+
+	props[0] = PROPERTY_ENTRY_U64("hartid", rintc->hart_id);
+	props[1] = PROPERTY_ENTRY_U32("riscv,ext-intc-id", rintc->ext_intc_id);
+	props[2] = PROPERTY_ENTRY_U64("riscv,imsic-addr", rintc->imsic_addr);
+	props[3] = PROPERTY_ENTRY_U32("riscv,imsic-size", rintc->imsic_size);
+	props[4] = PROPERTY_ENTRY_U32("#interrupt-cells", 1);
+
+	fwnode = fwnode_create_software_node_early(props, NULL);
+	if (fwnode) {
+		rintc_element = kzalloc(sizeof(*rintc_element), GFP_KERNEL);
+		if (!rintc_element) {
+			fwnode_remove_software_node(fwnode);
+			return NULL;
+		}
+
+		rintc_element->fwnode = fwnode;
+		list_add_tail(&rintc_element->list, &rintc_list);
+	}
+
+	return fwnode;
+}
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 1a0fc87152c5..1ef9cada1ed3 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -203,6 +203,12 @@  static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 
 	rintc = (struct acpi_madt_rintc *)header;
 
+	fn = acpi_rintc_create_irqchip_fwnode(rintc);
+	if (!fn) {
+		pr_err("unable to create INTC FW node\n");
+		return -ENOMEM;
+	}
+
 	/*
 	 * The ACPI MADT will have one INTC for each CPU (or HART)
 	 * so riscv_intc_acpi_init() function will be called once
@@ -212,12 +218,6 @@  static int __init riscv_intc_acpi_init(union acpi_subtable_headers *header,
 	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
 		return 0;
 
-	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
-	if (!fn) {
-		pr_err("unable to allocate INTC FW node\n");
-		return -ENOMEM;
-	}
-
 	return riscv_intc_init_common(fn);
 }