| Message ID | 1692192264-18515-3-git-send-email-quic_krichai@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCI: qcom: Add support for OPP | expand |
On Wed, 16 Aug 2023 at 16:25, Krishna chaitanya chundru <quic_krichai@quicinc.com> wrote: > > PCIe needs to choose the appropriate performance state of RPMH power > domain based upon the PCIe gen speed. > > So let's add the OPP table support to specify RPMH performance states. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 595533a..c77a683 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -1803,7 +1803,28 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pcie0_default_state>; > > + operating-points-v2 = <&pcie0_opp_table>; > + > status = "disabled"; > + > + pcie0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-2500000 { As a random suggestion: these frequencies are calculated by the driver. It might be easier to use opp-level for the PCIe generation instead. This way this OPP entry can become: opp-1 { opp-level = <1>; required-opps = <&rpmhpd_opp_low_svs>; }; > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > }; > > pcie0_phy: phy@1c06000 { > @@ -1915,7 +1936,33 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pcie1_default_state>; > > + operating-points-v2 = <&pcie1_opp_table>; > + > status = "disabled"; > + > + pcie1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + }; > + > + opp-16000000 { > + opp-hz = /bits/ 64 <16000000>; > + required-opps = <&rpmhpd_opp_nom>; > + }; > + }; > }; > > pcie1_phy: phy@1c0f000 { > -- > 2.7.4 >
On 8/16/2023 7:10 PM, Dmitry Baryshkov wrote: > On Wed, 16 Aug 2023 at 16:25, Krishna chaitanya chundru > <quic_krichai@quicinc.com> wrote: >> PCIe needs to choose the appropriate performance state of RPMH power >> domain based upon the PCIe gen speed. >> >> So let's add the OPP table support to specify RPMH performance states. >> >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++ >> 1 file changed, 47 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi >> index 595533a..c77a683 100644 >> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi >> @@ -1803,7 +1803,28 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pcie0_default_state>; >> >> + operating-points-v2 = <&pcie0_opp_table>; >> + >> status = "disabled"; >> + >> + pcie0_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-2500000 { > As a random suggestion: these frequencies are calculated by the > driver. It might be easier to use opp-level for the PCIe generation > instead. > > This way this OPP entry can become: > > opp-1 { > opp-level = <1>; > required-opps = <&rpmhpd_opp_low_svs>; > }; This looks good I will try to do in this approach in the next patch if there are no other comments. - KC > >> + opp-hz = /bits/ 64 <2500000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-5000000 { >> + opp-hz = /bits/ 64 <5000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-8000000 { >> + opp-hz = /bits/ 64 <8000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; >> }; >> >> pcie0_phy: phy@1c06000 { >> @@ -1915,7 +1936,33 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pcie1_default_state>; >> >> + operating-points-v2 = <&pcie1_opp_table>; >> + >> status = "disabled"; >> + >> + pcie1_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-2500000 { >> + opp-hz = /bits/ 64 <2500000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-5000000 { >> + opp-hz = /bits/ 64 <5000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-8000000 { >> + opp-hz = /bits/ 64 <8000000>; >> + required-opps = <&rpmhpd_opp_low_svs>; >> + }; >> + >> + opp-16000000 { >> + opp-hz = /bits/ 64 <16000000>; >> + required-opps = <&rpmhpd_opp_nom>; >> + }; >> + }; >> }; >> >> pcie1_phy: phy@1c0f000 { >> -- >> 2.7.4 >> >
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 595533a..c77a683 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1803,7 +1803,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; pcie0_phy: phy@1c06000 { @@ -1915,7 +1936,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; pcie1_phy: phy@1c0f000 {
PCIe needs to choose the appropriate performance state of RPMH power domain based upon the PCIe gen speed. So let's add the OPP table support to specify RPMH performance states. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)