@@ -1301,6 +1301,16 @@ config HID_MCP2221
To compile this driver as a module, choose M here: the module
will be called hid-mcp2221.ko.
+config HID_MCP2200
+ tristate "Microchip MCP2200 HID USB-to-GPIO bridge"
+ depends on USB_HID
+ imply GPIOLIB
+ help
+ Provides GPIO functionality over USB-HID through MCP2200 device.
+
+ To compile this driver as a module, choose M here: the module
+ will be called hid-mcp2200.ko.
+
config HID_KUNIT_TEST
tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS
depends on KUNIT
@@ -79,6 +79,7 @@ obj-$(CONFIG_HID_MACALLY) += hid-macally.o
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
obj-$(CONFIG_HID_MALTRON) += hid-maltron.o
obj-$(CONFIG_HID_MCP2221) += hid-mcp2221.o
+obj-$(CONFIG_HID_MCP2200) += hid-mcp2200.o
obj-$(CONFIG_HID_MAYFLASH) += hid-mf.o
obj-$(CONFIG_HID_MEGAWORLD_FF) += hid-megaworld.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
@@ -914,6 +914,7 @@
#define USB_DEVICE_ID_PICK16F1454_V2 0xf2f7
#define USB_DEVICE_ID_LUXAFOR 0xf372
#define USB_DEVICE_ID_MCP2221 0x00dd
+#define USB_DEVICE_ID_MCP2200 0x00df
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
new file mode 100644
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MCP2200 - Microchip USB to GPIO bridge
+ *
+ * Copyright (c) 2023, Johannes Roith <johannes@gnu-linux.rocks>
+ *
+ * Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22228A.pdf
+ * App Note for HID: https://ww1.microchip.com/downloads/en/DeviceDoc/93066A.pdf
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+//#include "hid-ids.h"
+#define USB_DEVICE_ID_MCP2200 0x00df
+#define USB_VENDOR_ID_MICROCHIP 0x04d8
+
+/* Commands codes in a raw output report */
+#define SET_CLEAR_OUTPUTS 0x08
+#define CONFIGURE 0x10
+#define READ_EE 0x20
+#define WRITE_EE 0x40
+#define READ_ALL 0x80
+
+/* MCP GPIO direction encoding */
+enum MCP_IO_DIR {
+ MCP2200_DIR_OUT = 0x00,
+ MCP2200_DIR_IN = 0x01,
+};
+
+/* Altternative pin assignments */
+#define TXLED 2
+#define RXLED 3
+#define USBCFG 6
+#define SSPND 7
+#define MCP_NGPIO 8
+
+/* CMD to set or clear a GPIO output */
+struct mcp_set_clear_outputs {
+ u8 cmd;
+ u8 dummys1[10];
+ u8 set_bmap;
+ u8 clear_bmap;
+ u8 dummys2[3];
+} __packed;
+
+/* CMD to configure the IOs */
+struct mcp_configure {
+ u8 cmd;
+ u8 dummys1[3];
+ u8 io_bmap;
+ u8 config_alt_pins;
+ u8 io_default_val_bmap;
+ u8 config_alt_options;
+ u8 baud_h;
+ u8 baud_l;
+ u8 dummys2[6];
+} __packed;
+
+/* CMD to read all parameters */
+struct mcp_read_all {
+ u8 cmd;
+ u8 dummys[15];
+} __packed;
+
+/* Response to the read all cmd */
+struct mcp_read_all_resp {
+ u8 cmd;
+ u8 eep_addr;
+ u8 dummy;
+ u8 eep_val;
+ u8 io_bmap;
+ u8 config_alt_pins;
+ u8 io_default_val_bmap;
+ u8 config_alt_options;
+ u8 baud_h;
+ u8 baud_l;
+ u8 io_port_val_bmap;
+ u8 dummys[5];
+} __packed;
+
+struct mcp2200 {
+ struct hid_device *hdev;
+ struct mutex lock;
+ struct completion wait_in_report;
+ u8 gpio_dir;
+ u8 gpio_val;
+ u8 gpio_inval;
+ u8 baud_h;
+ u8 baud_l;
+ u8 config_alt_pins;
+ u8 gpio_reset_val;
+ u8 config_alt_options;
+ int status;
+ struct gpio_chip gc;
+};
+
+/* this executes the READ_ALL cmd */
+static int mcp_cmd_read_all(struct mcp2200 *mcp)
+{
+ struct mcp_read_all *read_all;
+ int len, t;
+
+ reinit_completion(&mcp->wait_in_report);
+ read_all = kzalloc(sizeof(struct mcp_read_all), GFP_KERNEL);
+ if (!read_all)
+ return -ENOMEM;
+
+ read_all->cmd = READ_ALL;
+
+ mutex_lock(&mcp->lock);
+ len = hid_hw_output_report(mcp->hdev, (u8 *) read_all,
+ sizeof(struct mcp_read_all));
+
+ mutex_unlock(&mcp->lock);
+ kfree(read_all);
+
+ if (len != sizeof(struct mcp_read_all))
+ return -EINVAL;
+
+ t = wait_for_completion_timeout(&mcp->wait_in_report,
+ msecs_to_jiffies(4000));
+ if (!t)
+ return -ETIMEDOUT;
+
+ /* return status, negative value if wrong response was received */
+ return mcp->status;
+}
+
+static void mcp_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct mcp2200 *mcp = gpiochip_get_data(gc);
+ u8 value;
+ int status;
+ struct mcp_set_clear_outputs *cmd;
+
+ cmd = kzalloc(sizeof(struct mcp_set_clear_outputs), GFP_KERNEL);
+ if (!cmd)
+ return;
+
+ mutex_lock(&mcp->lock);
+
+ value = mcp->gpio_val & ~*mask;
+ value |= (*mask & *bits);
+
+ cmd->cmd = SET_CLEAR_OUTPUTS;
+ cmd->set_bmap = value;
+ cmd->clear_bmap = ~(value);
+
+ status = hid_hw_output_report(mcp->hdev, (u8 *) cmd,
+ sizeof(struct mcp_set_clear_outputs));
+
+ if (status == sizeof(struct mcp_set_clear_outputs))
+ mcp->gpio_val = value;
+
+ mutex_unlock(&mcp->lock);
+ kfree(cmd);
+}
+
+static void mcp_set(struct gpio_chip *gc, unsigned int gpio_nr, int value)
+{
+ unsigned long mask = 1 << gpio_nr;
+ unsigned long bmap_value = value << gpio_nr;
+
+ mcp_set_multiple(gc, &mask, &bmap_value);
+}
+
+static int mcp_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ u32 val;
+ struct mcp2200 *mcp = gpiochip_get_data(gc);
+ int status;
+
+ status = mcp_cmd_read_all(mcp);
+ if (status != 0)
+ return status;
+
+ val = mcp->gpio_inval;
+ *bits = (val & *mask);
+ return 0;
+}
+
+static int mcp_get(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+ unsigned long mask = 0, bits = 0;
+
+ mask = (1 << gpio_nr);
+ mcp_get_multiple(gc, &mask, &bits);
+ return bits > 0;
+}
+
+static int mcp_get_direction(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+ struct mcp2200 *mcp = gpiochip_get_data(gc);
+
+ return (mcp->gpio_dir & (MCP2200_DIR_IN << gpio_nr))
+ ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
+}
+
+static int mcp_set_direction(struct gpio_chip *gc, unsigned int gpio_nr,
+ enum MCP_IO_DIR io_direction)
+{
+ struct mcp2200 *mcp = gpiochip_get_data(gc);
+ struct mcp_configure *conf;
+ int status;
+ /* after the configure cmd we will need to set the outputs again */
+ unsigned long mask = ~(mcp->gpio_dir); /* only set outputs */
+ unsigned long bits = mcp->gpio_val;
+ /* Offsets of alternative pins in config_alt_pins, 0 is not used */
+ u8 alt_pin_conf[8] = {SSPND, USBCFG, 0, 0, 0, 0, RXLED, TXLED};
+ u8 config_alt_pins = mcp->config_alt_pins;
+
+ /* Read in the reset baudrate first, we need it later */
+ status = mcp_cmd_read_all(mcp);
+ if (status != 0)
+ return status;
+
+ conf = kzalloc(sizeof(struct mcp_configure), GFP_KERNEL);
+ if (!conf)
+ return -ENOMEM;
+
+ mutex_lock(&mcp->lock);
+
+ /* configure will reset the chip! */
+ conf->cmd = CONFIGURE;
+ conf->io_bmap = (mcp->gpio_dir & ~(1 << gpio_nr))
+ | (io_direction << gpio_nr);
+ /* Don't overwrite the reset parameters */
+ conf->baud_h = mcp->baud_h;
+ conf->baud_l = mcp->baud_l;
+ conf->config_alt_options = mcp->config_alt_options;
+ conf->io_default_val_bmap = mcp->gpio_reset_val;
+ /* Adjust alt. func if necessary */
+ if (alt_pin_conf[gpio_nr])
+ config_alt_pins &= ~(1 << alt_pin_conf[gpio_nr]);
+ conf->config_alt_pins = config_alt_pins;
+
+ status = hid_hw_output_report(mcp->hdev, (u8 *) conf,
+ sizeof(struct mcp_set_clear_outputs));
+
+ if (status == sizeof(struct mcp_set_clear_outputs)) {
+ mcp->gpio_dir &= ~(1 << gpio_nr);
+ mcp->config_alt_pins = config_alt_pins;
+ } else {
+ mutex_unlock(&mcp->lock);
+ kfree(conf);
+ return -EIO;
+ }
+
+ mutex_unlock(&mcp->lock);
+ kfree(conf);
+
+ /* Configure CMD will clear all IOs -> rewrite them */
+ mcp_set_multiple(gc, &mask, &bits);
+ return 0;
+}
+
+static int mcp_direction_input(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+ return mcp_set_direction(gc, gpio_nr, MCP2200_DIR_IN);
+}
+
+static int mcp_direction_output(struct gpio_chip *gc, unsigned int gpio_nr,
+ int value)
+{
+ int ret;
+ unsigned long mask, bmap_value;
+
+ mask = 1 << gpio_nr;
+ bmap_value = value << gpio_nr;
+
+ ret = mcp_set_direction(gc, gpio_nr, MCP2200_DIR_OUT);
+ if (ret == 0)
+ mcp_set_multiple(gc, &mask, &bmap_value);
+ return ret;
+}
+
+static const struct gpio_chip template_chip = {
+ .label = "mcp2200",
+ .owner = THIS_MODULE,
+ .get_direction = mcp_get_direction,
+ .direction_input = mcp_direction_input,
+ .direction_output = mcp_direction_output,
+ .set = mcp_set,
+ .set_multiple = mcp_set_multiple,
+ .get = mcp_get,
+ .get_multiple = mcp_get_multiple,
+ .base = -1,
+ .ngpio = MCP_NGPIO,
+ .can_sleep = true,
+};
+
+/*
+ * MCP2200 uses interrupt endpoint for input reports. This function
+ * is called by HID layer when it receives i/p report from mcp2200,
+ * which is actually a response to the previously sent command.
+ */
+static int mcp2200_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct mcp2200 *mcp = hid_get_drvdata(hdev);
+ struct mcp_read_all_resp *all_resp;
+
+ switch (data[0]) {
+ case READ_ALL:
+ all_resp = (struct mcp_read_all_resp *) data;
+ mcp->status = 0;
+ mcp->gpio_inval = all_resp->io_port_val_bmap;
+ mcp->baud_h = all_resp->baud_h;
+ mcp->baud_l = all_resp->baud_l;
+ mcp->gpio_reset_val = all_resp->io_default_val_bmap;
+ mcp->config_alt_pins = all_resp->config_alt_pins;
+ mcp->config_alt_options = all_resp->config_alt_options;
+ break;
+ default:
+ mcp->status = -EIO;
+ break;
+ }
+
+ complete(&mcp->wait_in_report);
+ return 1;
+}
+
+static void mcp2200_hid_unregister(void *ptr)
+{
+ struct hid_device *hdev = ptr;
+
+ hid_hw_close(hdev);
+ hid_hw_stop(hdev);
+}
+
+static int mcp2200_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct mcp2200 *mcp;
+
+ mcp = devm_kzalloc(&hdev->dev, sizeof(*mcp), GFP_KERNEL);
+ if (!mcp)
+ return -ENOMEM;
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "can't parse reports\n");
+ return ret;
+ }
+
+ /*
+ * This driver uses the .raw_event callback and therefore does not need any
+ * HID_CONNECT_xxx flags.
+ */
+ ret = hid_hw_start(hdev, 0);
+ if (ret) {
+ hid_err(hdev, "can't start hardware\n");
+ return ret;
+ }
+
+ hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
+ hdev->version & 0xff, hdev->name, hdev->phys);
+
+ ret = hid_hw_open(hdev);
+ if (ret) {
+ hid_err(hdev, "can't open device\n");
+ return ret;
+ }
+
+ mutex_init(&mcp->lock);
+ init_completion(&mcp->wait_in_report);
+ hid_set_drvdata(hdev, mcp);
+ mcp->hdev = hdev;
+
+ ret = devm_add_action_or_reset(&hdev->dev, mcp2200_hid_unregister, hdev);
+ if (ret)
+ return ret;
+
+ mcp->gc = template_chip;
+ mcp->gc.parent = &hdev->dev;
+
+ ret = devm_gpiochip_add_data(&hdev->dev, &mcp->gc, mcp);
+ if (ret < 0) {
+ hid_err(hdev, "Unable to register gpiochip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void mcp2200_remove(struct hid_device *hdev)
+{
+ struct mcp2200 *mcp;
+
+ mcp = hid_get_drvdata(hdev);
+}
+
+static const struct hid_device_id mcp2200_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2200) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, mcp2200_devices);
+
+static struct hid_driver mcp2200_driver = {
+ .name = "mcp2200",
+ .id_table = mcp2200_devices,
+ .probe = mcp2200_probe,
+ .remove = mcp2200_remove,
+ .raw_event = mcp2200_raw_event,
+};
+
+/* Register with HID core */
+module_hid_driver(mcp2200_driver);
+
+MODULE_AUTHOR("Johannes Roith <johannes@gnu-linux.rocks>");
+MODULE_DESCRIPTION("MCP2200 Microchip HID USB to GPIO bridge");
+MODULE_LICENSE("GPL");