diff mbox series

[v4,21/28] net: wan: Add framer framework support

Message ID 5f671caf19be0a9bb7ea7b96a6c86381e243ca4c.1692376361.git.christophe.leroy@csgroup.eu (mailing list archive)
State New, archived
Headers show
Series Add support for QMC HDLC, framer infrastruture and PEF2256 framer (v4) | expand

Commit Message

Christophe Leroy Aug. 18, 2023, 4:39 p.m. UTC
From: Herve Codina <herve.codina@bootlin.com>

A framer is a component in charge of an E1/T1 line interface.
Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
frames. It also provides information related to the E1/T1 line.

The framer framework provides a set of APIs for the framer drivers
(framer provider) to create/destroy a framer and APIs for the framer
users (framer consumer) to obtain a reference to the framer, and
use the framer.

This basic implementation provides a framer abstraction for:
 - power on/off the framer
 - get the framer status (line state)
 - be notified on framer status changes
 - get/set the framer configuration

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v4: Fixed wrong names in three EXPORT_SYMBOL()
---
 drivers/net/wan/Kconfig                |   2 +
 drivers/net/wan/Makefile               |   2 +
 drivers/net/wan/framer/Kconfig         |  19 +
 drivers/net/wan/framer/Makefile        |   6 +
 drivers/net/wan/framer/framer-core.c   | 886 +++++++++++++++++++++++++
 include/linux/framer/framer-provider.h | 194 ++++++
 include/linux/framer/framer.h          | 199 ++++++
 7 files changed, 1308 insertions(+)
 create mode 100644 drivers/net/wan/framer/Kconfig
 create mode 100644 drivers/net/wan/framer/Makefile
 create mode 100644 drivers/net/wan/framer/framer-core.c
 create mode 100644 include/linux/framer/framer-provider.h
 create mode 100644 include/linux/framer/framer.h

Comments

Jakub Kicinski Aug. 19, 2023, 2:46 a.m. UTC | #1
On Fri, 18 Aug 2023 18:39:15 +0200 Christophe Leroy wrote:
> From: Herve Codina <herve.codina@bootlin.com>
> 
> A framer is a component in charge of an E1/T1 line interface.
> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> frames. It also provides information related to the E1/T1 line.

Okay, progress is being made, now it builds patch by patch.
Still some kdoc warnings remain (W=1 build only catches
kdoc warnings in sources, you gotta run ./scripts/kernel-doc -none
explicitly on the headers):

include/linux/framer/framer.h:27: warning: Enum value 'FRAMER_IFACE_E1' not described in enum 'framer_iface'
include/linux/framer/framer.h:27: warning: Enum value 'FRAMER_IFACE_T1' not described in enum 'framer_iface'
include/linux/framer/framer.h:35: warning: expecting prototype for enum framer_clock_mode. Prototype was for enum framer_clock_type instead
include/linux/framer/framer.h:47: warning: expecting prototype for struct framer_configuration. Prototype was for struct framer_config instead
include/linux/framer/framer.h:60: warning: cannot understand function prototype: 'enum framer_event '
include/linux/framer/framer.h:89: warning: Function parameter or member 'notify_status_work' not described in 'framer'
include/linux/framer/framer.h:89: warning: Function parameter or member 'notifier_list' not described in 'framer'
include/linux/framer/framer.h:89: warning: Function parameter or member 'polling_work' not described in 'framer'
Simon Horman Aug. 20, 2023, 5:15 p.m. UTC | #2
On Fri, Aug 18, 2023 at 06:39:15PM +0200, Christophe Leroy wrote:
> From: Herve Codina <herve.codina@bootlin.com>
> 
> A framer is a component in charge of an E1/T1 line interface.
> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> frames. It also provides information related to the E1/T1 line.
> 
> The framer framework provides a set of APIs for the framer drivers
> (framer provider) to create/destroy a framer and APIs for the framer
> users (framer consumer) to obtain a reference to the framer, and
> use the framer.
> 
> This basic implementation provides a framer abstraction for:
>  - power on/off the framer
>  - get the framer status (line state)
>  - be notified on framer status changes
>  - get/set the framer configuration
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

Hi Christophe and Herve,

some minor feedback from my side.

...

> diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c

...

> +/**
> + * framer_create() - create a new framer
> + * @dev: device that is creating the new framer
> + * @node: device node of the framer. default to dev->of_node.
> + * @ops: function pointers for performing framer operations
> + *
> + * Called to create a framer using framer framework.
> + */
> +struct framer *framer_create(struct device *dev, struct device_node *node,
> +			     const struct framer_ops *ops)
> +{
> +	int ret;
> +	int id;
> +	struct framer *framer;

Please arrange local variable declarations for Networking code
using reverse xmas tree order - longest line to shortest.

https://github.com/ecree-solarflare/xmastree is helpful here.

...

> diff --git a/include/linux/framer/framer-provider.h b/include/linux/framer/framer-provider.h

...

> +/**
> + * struct framer_ops - set of function pointers for performing framer operations
> + * @init: operation to be performed for initializing the framer
> + * @exit: operation to be performed while exiting
> + * @power_on: powering on the framer
> + * @power_off: powering off the framer
> + * @flags: OR-ed flags (FRAMER_FLAG_*) to ask for core functionality
> + *          - @FRAMER_FLAG_POLL_STATUS:
> + *            Ask the core to perfom a polling to get the framer status and

nit: perfom -> perform

     checkpatch.pl --codespell is your friend here

> + *            notify consumers on change.
> + *            The framer should call @framer_notify_status_change() when it
> + *            detects a status change. This is usally done using interrutps.

nit: usally -> usually
     interrutps -> interrupts

...

> diff --git a/include/linux/framer/framer.h b/include/linux/framer/framer.h
> new file mode 100644
> index 000000000000..0bee7135142f
> --- /dev/null
> +++ b/include/linux/framer/framer.h
> @@ -0,0 +1,199 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Generic framer header file
> + *
> + * Copyright 2023 CS GROUP France
> + *
> + * Author: Herve Codina <herve.codina@bootlin.com>
> + */
> +
> +#ifndef __DRIVERS_FRAMER_H
> +#define __DRIVERS_FRAMER_H
> +
> +#include <linux/err.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/device.h>
> +#include <linux/workqueue.h>
> +
> +/**
> + * enum framer_iface - Framer interface

As this is a kernel-doc, please include documentation for
the defined constants: FRAMER_IFACE_E1 and FRAMER_IFACE_T1.

As flagged by: ./scripts/kernel-doc -none

> + */
> +enum framer_iface {
> +	FRAMER_IFACE_E1,      /* E1 interface */
> +	FRAMER_IFACE_T1,      /* T1 interface */
> +};
> +
> +/**
> + * enum framer_clock_mode - Framer clock mode

Likewise here too.

Also, nit: framer_clock_mode -> framer_clock_type

> + */
> +enum framer_clock_type {
> +	FRAMER_CLOCK_EXT, /* External clock */
> +	FRAMER_CLOCK_INT, /* Internal clock */
> +};
> +
> +/**
> + * struct framer_configuration - Framer configuration

nit: framer_configuration -> framer_config

> + * @line_iface: Framer line interface
> + * @clock_mode: Framer clock type
> + * @clock_rate: Framer clock rate
> + */
> +struct framer_config {
> +	enum framer_iface iface;
> +	enum framer_clock_type clock_type;
> +	unsigned long line_clock_rate;
> +};
> +
> +/**
> + * struct framer_status - Framer status
> + * @link_is_on: Framer link state. true, the link is on, false, the link is off.
> + */
> +struct framer_status {
> +	bool link_is_on;
> +};
> +
> +/**
> + * framer_event - event available for notification

nit: framer_event -> enum framer_event

A~d please document FRAMER_EVENT_STATUS in the kernel doc too.

> + */
> +enum framer_event {
> +	FRAMER_EVENT_STATUS,	/* Event notified on framer_status changes */
> +};

...
Linus Walleij Aug. 20, 2023, 9:06 p.m. UTC | #3
On Fri, Aug 18, 2023 at 6:41 PM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:

> From: Herve Codina <herve.codina@bootlin.com>
>
> A framer is a component in charge of an E1/T1 line interface.
> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> frames. It also provides information related to the E1/T1 line.
>
> The framer framework provides a set of APIs for the framer drivers
> (framer provider) to create/destroy a framer and APIs for the framer
> users (framer consumer) to obtain a reference to the framer, and
> use the framer.
>
> This basic implementation provides a framer abstraction for:
>  - power on/off the framer
>  - get the framer status (line state)
>  - be notified on framer status changes
>  - get/set the framer configuration
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

I had these review comments, you must have missed them?
https://lore.kernel.org/netdev/CACRpkdZQ9_f6+9CseV1L_wGphHujFPAYXMjJfjUrzSZRakOBzg@mail.gmail.com/

Yours,
Linus Walleij
Christophe Leroy Aug. 21, 2023, 5:19 a.m. UTC | #4
Hi Linus,

Le 20/08/2023 à 23:06, Linus Walleij a écrit :
> On Fri, Aug 18, 2023 at 6:41 PM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
> 
>> From: Herve Codina <herve.codina@bootlin.com>
>>
>> A framer is a component in charge of an E1/T1 line interface.
>> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
>> frames. It also provides information related to the E1/T1 line.
>>
>> The framer framework provides a set of APIs for the framer drivers
>> (framer provider) to create/destroy a framer and APIs for the framer
>> users (framer consumer) to obtain a reference to the framer, and
>> use the framer.
>>
>> This basic implementation provides a framer abstraction for:
>>   - power on/off the framer
>>   - get the framer status (line state)
>>   - be notified on framer status changes
>>   - get/set the framer configuration
>>
>> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
>> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> 
> I had these review comments, you must have missed them?
> https://lore.kernel.org/netdev/CACRpkdZQ9_f6+9CseV1L_wGphHujFPAYXMjJfjUrzSZRakOBzg@mail.gmail.com/
> 

As I said in the cover letter, this series only fixes critical build 
failures that happened when CONFIG_MODULES is set. The purpose was to 
allow robots to perform their job up to the end. Other feedback and 
comments will be taken into account by Hervé when he is back from holidays.

Thanks
Christophe
Christophe JAILLET Aug. 21, 2023, 6:02 a.m. UTC | #5
Le 18/08/2023 à 18:39, Christophe Leroy a écrit :
> From: Herve Codina <herve.codina@bootlin.com>
> 
> A framer is a component in charge of an E1/T1 line interface.
> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> frames. It also provides information related to the E1/T1 line.
> 
> The framer framework provides a set of APIs for the framer drivers
> (framer provider) to create/destroy a framer and APIs for the framer
> users (framer consumer) to obtain a reference to the framer, and
> use the framer.
> 
> This basic implementation provides a framer abstraction for:
>   - power on/off the framer
>   - get the framer status (line state)
>   - be notified on framer status changes
>   - get/set the framer configuration
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---

Hi,

should there be a V5, some nits below.

...

> +int framer_power_off(struct framer *framer)
> +{
> +	int ret;
> +
> +	mutex_lock(&framer->mutex);
> +	if (framer->power_count == 1 && framer->ops->power_off) {
> +		ret =  framer->ops->power_off(framer);

                      ~~
Useless extra space

> +		if (ret < 0) {
> +			dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret);
> +			mutex_unlock(&framer->mutex);
> +			return ret;
> +		}
> +	}
> +	--framer->power_count;
> +	mutex_unlock(&framer->mutex);
> +	framer_pm_runtime_put(framer);
> +
> +	if (framer->pwr)
> +		regulator_disable(framer->pwr);
> +
> +	return 0;
> +}

...

> +struct framer *framer_create(struct device *dev, struct device_node *node,
> +			     const struct framer_ops *ops)
> +{
> +	int ret;
> +	int id;
> +	struct framer *framer;
> +
> +	if (WARN_ON(!dev))
> +		return ERR_PTR(-EINVAL);
> +
> +	/* get_status() is mandatory if the provider ask for polling status */
> +	if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status))
> +		return ERR_PTR(-EINVAL);
> +
> +	framer = kzalloc(sizeof(*framer), GFP_KERNEL);
> +	if (!framer)
> +		return ERR_PTR(-ENOMEM);
> +
> +	id = ida_simple_get(&framer_ida, 0, 0, GFP_KERNEL);

ida_alloc()?
(ida_simple_get() is deprecated)

> +	if (id < 0) {
> +		dev_err(dev, "unable to get id\n");
> +		ret = id;
> +		goto free_framer;
> +	}
> +
> +	device_initialize(&framer->dev);
> +	mutex_init(&framer->mutex);
> +	INIT_WORK(&framer->notify_status_work, framer_notify_status_work);
> +	INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work);
> +	BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list);
> +
> +	framer->dev.class = framer_class;
> +	framer->dev.parent = dev;
> +	framer->dev.of_node = node ? node : dev->of_node;
> +	framer->id = id;
> +	framer->ops = ops;
> +
> +	ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id);
> +	if (ret)
> +		goto put_dev;
> +
> +	/* framer-supply */
> +	framer->pwr = regulator_get_optional(&framer->dev, "framer");
> +	if (IS_ERR(framer->pwr)) {
> +		ret = PTR_ERR(framer->pwr);
> +		if (ret == -EPROBE_DEFER)
> +			goto put_dev;
> +
> +		framer->pwr = NULL;
> +	}
> +
> +	ret = device_add(&framer->dev);
> +	if (ret)
> +		goto put_dev;
> +
> +	if (pm_runtime_enabled(dev)) {
> +		pm_runtime_enable(&framer->dev);
> +		pm_runtime_no_callbacks(&framer->dev);
> +	}
> +
> +	return framer;
> +
> +put_dev:
> +	put_device(&framer->dev);  /* calls framer_release() which frees resources */
> +	return ERR_PTR(ret);
> +
> +free_framer:
> +	kfree(framer);
> +	return ERR_PTR(ret);
> +}

...

> +void framer_provider_of_unregister(struct framer_provider *framer_provider)
> +{
> +	mutex_lock(&framer_provider_mutex);
> +	list_del(&framer_provider->list);
> +	of_node_put(framer_provider->dev->of_node);
> +	kfree(framer_provider);
> +	mutex_unlock(&framer_provider_mutex);

If it make sense, of_node_put() and kfree() could maybe be out of the 
mutex, in order to match how things are done in 
__framer_provider_of_register().

> +}

...

> +static void framer_release(struct device *dev)
> +{
> +	struct framer *framer;
> +
> +	framer = dev_to_framer(dev);
> +	regulator_put(framer->pwr);
> +	ida_simple_remove(&framer_ida, framer->id);

ida_free()?
(ida_simple_remove() is deprecated)

> +	kfree(framer);
> +}

...
Linus Walleij Aug. 21, 2023, 7:21 a.m. UTC | #6
On Mon, Aug 21, 2023 at 7:19 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
> Le 20/08/2023 à 23:06, Linus Walleij a écrit :
> > On Fri, Aug 18, 2023 at 6:41 PM Christophe Leroy
> > <christophe.leroy@csgroup.eu> wrote:
> >
> >> From: Herve Codina <herve.codina@bootlin.com>
> >>
> >> A framer is a component in charge of an E1/T1 line interface.
> >> Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> >> frames. It also provides information related to the E1/T1 line.
> >>
> >> The framer framework provides a set of APIs for the framer drivers
> >> (framer provider) to create/destroy a framer and APIs for the framer
> >> users (framer consumer) to obtain a reference to the framer, and
> >> use the framer.
> >>
> >> This basic implementation provides a framer abstraction for:
> >>   - power on/off the framer
> >>   - get the framer status (line state)
> >>   - be notified on framer status changes
> >>   - get/set the framer configuration
> >>
> >> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> >> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> >
> > I had these review comments, you must have missed them?
> > https://lore.kernel.org/netdev/CACRpkdZQ9_f6+9CseV1L_wGphHujFPAYXMjJfjUrzSZRakOBzg@mail.gmail.com/
> >
>
> As I said in the cover letter, this series only fixes critical build
> failures that happened when CONFIG_MODULES is set. The purpose was to
> allow robots to perform their job up to the end. Other feedback and
> comments will be taken into account by Hervé when he is back from holidays.

Ah I see. I completely missed this.

Yours,
Linus Walleij
Jakub Kicinski Aug. 21, 2023, 6:52 p.m. UTC | #7
On Mon, 21 Aug 2023 05:19:22 +0000 Christophe Leroy wrote:
> As I said in the cover letter, this series only fixes critical build 
> failures that happened when CONFIG_MODULES is set. The purpose was to 
> allow robots to perform their job up to the end. Other feedback and 
> comments will be taken into account by Hervé when he is back from holidays.

I missed this too, FTR this is unacceptable.

Quoting documentation:

  **Do not** post your patches just to run them through the checks.
  You must ensure that your patches are ready by testing them locally
  before posting to the mailing list. The patchwork build bot instance
  gets overloaded very easily and netdev@vger really doesn't need more
  traffic if we can help it.
  
See: https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#patchwork-checks
Herve Codina Aug. 24, 2023, 4:37 p.m. UTC | #8
Hi Christophe,

On Mon, 21 Aug 2023 08:02:10 +0200
Christophe JAILLET <christophe.jaillet@wanadoo.fr> wrote:

> Le 18/08/2023 à 18:39, Christophe Leroy a écrit :
> > From: Herve Codina <herve.codina@bootlin.com>
> > 
> > A framer is a component in charge of an E1/T1 line interface.
> > Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> > frames. It also provides information related to the E1/T1 line.
> > 
> > The framer framework provides a set of APIs for the framer drivers
> > (framer provider) to create/destroy a framer and APIs for the framer
> > users (framer consumer) to obtain a reference to the framer, and
> > use the framer.
> > 
> > This basic implementation provides a framer abstraction for:
> >   - power on/off the framer
> >   - get the framer status (line state)
> >   - be notified on framer status changes
> >   - get/set the framer configuration
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> > Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> > ---  
> 
> Hi,
> 
> should there be a V5, some nits below.
> 
> ...
> 
> > +int framer_power_off(struct framer *framer)
> > +{
> > +	int ret;
> > +
> > +	mutex_lock(&framer->mutex);
> > +	if (framer->power_count == 1 && framer->ops->power_off) {
> > +		ret =  framer->ops->power_off(framer);  
> 
>                       ~~
> Useless extra space

Will be remove in the next iteration.

> 
> > +		if (ret < 0) {
> > +			dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret);
> > +			mutex_unlock(&framer->mutex);
> > +			return ret;
> > +		}
> > +	}
> > +	--framer->power_count;
> > +	mutex_unlock(&framer->mutex);
> > +	framer_pm_runtime_put(framer);
> > +
> > +	if (framer->pwr)
> > +		regulator_disable(framer->pwr);
> > +
> > +	return 0;
> > +}  
> 
> ...
> 
> > +struct framer *framer_create(struct device *dev, struct device_node *node,
> > +			     const struct framer_ops *ops)
> > +{
> > +	int ret;
> > +	int id;
> > +	struct framer *framer;
> > +
> > +	if (WARN_ON(!dev))
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	/* get_status() is mandatory if the provider ask for polling status */
> > +	if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status))
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	framer = kzalloc(sizeof(*framer), GFP_KERNEL);
> > +	if (!framer)
> > +		return ERR_PTR(-ENOMEM);
> > +
> > +	id = ida_simple_get(&framer_ida, 0, 0, GFP_KERNEL);  
> 
> ida_alloc()?
> (ida_simple_get() is deprecated)

Indeed, ida_alloc() and ida_free() will be used in the next iteration.

> 
> > +	if (id < 0) {
> > +		dev_err(dev, "unable to get id\n");
> > +		ret = id;
> > +		goto free_framer;
> > +	}
> > +
> > +	device_initialize(&framer->dev);
> > +	mutex_init(&framer->mutex);
> > +	INIT_WORK(&framer->notify_status_work, framer_notify_status_work);
> > +	INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work);
> > +	BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list);
> > +
> > +	framer->dev.class = framer_class;
> > +	framer->dev.parent = dev;
> > +	framer->dev.of_node = node ? node : dev->of_node;
> > +	framer->id = id;
> > +	framer->ops = ops;
> > +
> > +	ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id);
> > +	if (ret)
> > +		goto put_dev;
> > +
> > +	/* framer-supply */
> > +	framer->pwr = regulator_get_optional(&framer->dev, "framer");
> > +	if (IS_ERR(framer->pwr)) {
> > +		ret = PTR_ERR(framer->pwr);
> > +		if (ret == -EPROBE_DEFER)
> > +			goto put_dev;
> > +
> > +		framer->pwr = NULL;
> > +	}
> > +
> > +	ret = device_add(&framer->dev);
> > +	if (ret)
> > +		goto put_dev;
> > +
> > +	if (pm_runtime_enabled(dev)) {
> > +		pm_runtime_enable(&framer->dev);
> > +		pm_runtime_no_callbacks(&framer->dev);
> > +	}
> > +
> > +	return framer;
> > +
> > +put_dev:
> > +	put_device(&framer->dev);  /* calls framer_release() which frees resources */
> > +	return ERR_PTR(ret);
> > +
> > +free_framer:
> > +	kfree(framer);
> > +	return ERR_PTR(ret);
> > +}  
> 
> ...
> 
> > +void framer_provider_of_unregister(struct framer_provider *framer_provider)
> > +{
> > +	mutex_lock(&framer_provider_mutex);
> > +	list_del(&framer_provider->list);
> > +	of_node_put(framer_provider->dev->of_node);
> > +	kfree(framer_provider);
> > +	mutex_unlock(&framer_provider_mutex);  
> 
> If it make sense, of_node_put() and kfree() could maybe be out of the 
> mutex, in order to match how things are done in 
> __framer_provider_of_register().

Yes, it makes sense.
Both of_node_put() and kfree() will be moved out of the mutex.

> 
> > +}  
> 
> ...
> 
> > +static void framer_release(struct device *dev)
> > +{
> > +	struct framer *framer;
> > +
> > +	framer = dev_to_framer(dev);
> > +	regulator_put(framer->pwr);
> > +	ida_simple_remove(&framer_ida, framer->id);  
> 
> ida_free()?
> (ida_simple_remove() is deprecated)

Yes

> 
> > +	kfree(framer);
> > +}  
> 
> ...
> 

Thanks for the review,
Hervé
Herve Codina Aug. 24, 2023, 4:44 p.m. UTC | #9
Hi Simon,

On Sun, 20 Aug 2023 19:15:11 +0200
Simon Horman <horms@kernel.org> wrote:

> On Fri, Aug 18, 2023 at 06:39:15PM +0200, Christophe Leroy wrote:
> > From: Herve Codina <herve.codina@bootlin.com>
> > 
> > A framer is a component in charge of an E1/T1 line interface.
> > Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
> > frames. It also provides information related to the E1/T1 line.
> > 
> > The framer framework provides a set of APIs for the framer drivers
> > (framer provider) to create/destroy a framer and APIs for the framer
> > users (framer consumer) to obtain a reference to the framer, and
> > use the framer.
> > 
> > This basic implementation provides a framer abstraction for:
> >  - power on/off the framer
> >  - get the framer status (line state)
> >  - be notified on framer status changes
> >  - get/set the framer configuration
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> > Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>  
> 
> Hi Christophe and Herve,
> 
> some minor feedback from my side.
> 
> ...
> 
> > diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c  
> 
> ...
> 
> > +/**
> > + * framer_create() - create a new framer
> > + * @dev: device that is creating the new framer
> > + * @node: device node of the framer. default to dev->of_node.
> > + * @ops: function pointers for performing framer operations
> > + *
> > + * Called to create a framer using framer framework.
> > + */
> > +struct framer *framer_create(struct device *dev, struct device_node *node,
> > +			     const struct framer_ops *ops)
> > +{
> > +	int ret;
> > +	int id;
> > +	struct framer *framer;  
> 
> Please arrange local variable declarations for Networking code
> using reverse xmas tree order - longest line to shortest.

Yes, will be done in the next iteration.

> 
> https://github.com/ecree-solarflare/xmastree is helpful here.
> 
> ...
> 
> > diff --git a/include/linux/framer/framer-provider.h b/include/linux/framer/framer-provider.h  
> 
> ...
> 
> > +/**
> > + * struct framer_ops - set of function pointers for performing framer operations
> > + * @init: operation to be performed for initializing the framer
> > + * @exit: operation to be performed while exiting
> > + * @power_on: powering on the framer
> > + * @power_off: powering off the framer
> > + * @flags: OR-ed flags (FRAMER_FLAG_*) to ask for core functionality
> > + *          - @FRAMER_FLAG_POLL_STATUS:
> > + *            Ask the core to perfom a polling to get the framer status and  
> 
> nit: perfom -> perform

Will be fixed in the next iteration.

> 
>      checkpatch.pl --codespell is your friend here
> 
> > + *            notify consumers on change.
> > + *            The framer should call @framer_notify_status_change() when it
> > + *            detects a status change. This is usally done using interrutps.  
> 
> nit: usally -> usually
>      interrutps -> interrupts

Will be fixed in the next iteration.

> 
> ...
> 
> > diff --git a/include/linux/framer/framer.h b/include/linux/framer/framer.h
> > new file mode 100644
> > index 000000000000..0bee7135142f
> > --- /dev/null
> > +++ b/include/linux/framer/framer.h
> > @@ -0,0 +1,199 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +/*
> > + * Generic framer header file
> > + *
> > + * Copyright 2023 CS GROUP France
> > + *
> > + * Author: Herve Codina <herve.codina@bootlin.com>
> > + */
> > +
> > +#ifndef __DRIVERS_FRAMER_H
> > +#define __DRIVERS_FRAMER_H
> > +
> > +#include <linux/err.h>
> > +#include <linux/mutex.h>
> > +#include <linux/notifier.h>
> > +#include <linux/of.h>
> > +#include <linux/device.h>
> > +#include <linux/workqueue.h>
> > +
> > +/**
> > + * enum framer_iface - Framer interface  
> 
> As this is a kernel-doc, please include documentation for
> the defined constants: FRAMER_IFACE_E1 and FRAMER_IFACE_T1.
> 
> As flagged by: ./scripts/kernel-doc -none

Will be done in the next iteration.

> 
> > + */
> > +enum framer_iface {
> > +	FRAMER_IFACE_E1,      /* E1 interface */
> > +	FRAMER_IFACE_T1,      /* T1 interface */
> > +};
> > +
> > +/**
> > + * enum framer_clock_mode - Framer clock mode  
> 
> Likewise here too.
> 
> Also, nit: framer_clock_mode -> framer_clock_type
> 

Will be updated (doc and change to framer_clock_type) in the next iteration.

> > + */
> > +enum framer_clock_type {
> > +	FRAMER_CLOCK_EXT, /* External clock */
> > +	FRAMER_CLOCK_INT, /* Internal clock */
> > +};
> > +
> > +/**
> > + * struct framer_configuration - Framer configuration  
> 
> nit: framer_configuration -> framer_config

Will be fixed in the next iteration.

> 
> > + * @line_iface: Framer line interface
> > + * @clock_mode: Framer clock type
> > + * @clock_rate: Framer clock rate
> > + */
> > +struct framer_config {
> > +	enum framer_iface iface;
> > +	enum framer_clock_type clock_type;
> > +	unsigned long line_clock_rate;
> > +};
> > +
> > +/**
> > + * struct framer_status - Framer status
> > + * @link_is_on: Framer link state. true, the link is on, false, the link is off.
> > + */
> > +struct framer_status {
> > +	bool link_is_on;
> > +};
> > +
> > +/**
> > + * framer_event - event available for notification  
> 
> nit: framer_event -> enum framer_event

Will be fixed in the next iteration.

> 
> A~d please document FRAMER_EVENT_STATUS in the kernel doc too.

Will be documented in the next iteration.

> 
> > + */
> > +enum framer_event {
> > +	FRAMER_EVENT_STATUS,	/* Event notified on framer_status changes */
> > +};  
> 
> ...

Thanks for the review,
Best regards,
Hervé
diff mbox series

Patch

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 8de99f4b647b..31ab2136cdf1 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -95,6 +95,8 @@  config HDLC_X25
 comment "X.25/LAPB support is disabled"
 	depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
 
+source "drivers/net/wan/framer/Kconfig"
+
 config PCI200SYN
 	tristate "Goramo PCI200SYN support"
 	depends on HDLC && PCI
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index f338f4830626..00e9b7ee1e01 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -14,6 +14,8 @@  obj-$(CONFIG_HDLC_FR)		+= hdlc_fr.o
 obj-$(CONFIG_HDLC_PPP)		+= hdlc_ppp.o
 obj-$(CONFIG_HDLC_X25)		+= hdlc_x25.o
 
+obj-y				+= framer/
+
 obj-$(CONFIG_FARSYNC)		+= farsync.o
 
 obj-$(CONFIG_LAPBETHER)		+= lapbether.o
diff --git a/drivers/net/wan/framer/Kconfig b/drivers/net/wan/framer/Kconfig
new file mode 100644
index 000000000000..96ef1e7ba8eb
--- /dev/null
+++ b/drivers/net/wan/framer/Kconfig
@@ -0,0 +1,19 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# FRAMER
+#
+
+menu "Framer Subsystem"
+
+config GENERIC_FRAMER
+	bool "Framer Core"
+	help
+	  Generic Framer support.
+
+	  This framework is designed to provide a generic interface for framer
+	  devices present in the kernel. This layer will have the generic
+	  API by which framer drivers can create framer using the framer
+	  framework and framer users can obtain reference to the framer.
+	  All the users of this framework should select this config.
+
+endmenu
diff --git a/drivers/net/wan/framer/Makefile b/drivers/net/wan/framer/Makefile
new file mode 100644
index 000000000000..78dbd8e563d0
--- /dev/null
+++ b/drivers/net/wan/framer/Makefile
@@ -0,0 +1,6 @@ 
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the framer drivers.
+#
+
+obj-$(CONFIG_GENERIC_FRAMER)			+= framer-core.o
diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c
new file mode 100644
index 000000000000..1fb23a068010
--- /dev/null
+++ b/drivers/net/wan/framer/framer-core.c
@@ -0,0 +1,886 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic Framer framework.
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#include <linux/device.h>
+#include <linux/framer/framer.h>
+#include <linux/framer/framer-provider.h>
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+static struct class *framer_class;
+static DEFINE_MUTEX(framer_provider_mutex);
+static LIST_HEAD(framer_provider_list);
+static DEFINE_IDA(framer_ida);
+
+#define dev_to_framer(a)	(container_of((a), struct framer, dev))
+
+int framer_pm_runtime_get(struct framer *framer)
+{
+	int ret;
+
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	ret = pm_runtime_get(&framer->dev);
+	if (ret < 0 && ret != -EINPROGRESS)
+		pm_runtime_put_noidle(&framer->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_get);
+
+int framer_pm_runtime_get_sync(struct framer *framer)
+{
+	int ret;
+
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	ret = pm_runtime_get_sync(&framer->dev);
+	if (ret < 0)
+		pm_runtime_put_sync(&framer->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_get_sync);
+
+int framer_pm_runtime_put(struct framer *framer)
+{
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	return pm_runtime_put(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_put);
+
+int framer_pm_runtime_put_sync(struct framer *framer)
+{
+	if (!pm_runtime_enabled(&framer->dev))
+		return -EOPNOTSUPP;
+
+	return pm_runtime_put_sync(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_pm_runtime_put_sync);
+
+/**
+ * framer_init - framer internal initialization before framer operation
+ * @framer: the framer returned by framer_get()
+ *
+ * Used to allow framer's driver to perform framer internal initialization,
+ * such as PLL block powering, clock initialization or anything that's
+ * is required by the framer to perform the start of operation.
+ * Must be called before framer_power_on().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_init(struct framer *framer)
+{
+	bool start_polling = false;
+	int ret;
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		return ret;
+	ret = 0; /* Override possible ret == -EOPNOTSUPP */
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count > framer->init_count)
+		dev_warn(&framer->dev, "framer_power_on was called before framer init\n");
+
+	if (framer->init_count == 0) {
+		if (framer->ops->init) {
+			ret = framer->ops->init(framer);
+			if (ret < 0) {
+				dev_err(&framer->dev, "framer init failed --> %d\n", ret);
+				goto out;
+			}
+		}
+		if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS)
+			start_polling = true;
+	}
+	++framer->init_count;
+
+out:
+	mutex_unlock(&framer->mutex);
+
+	if (!ret && start_polling) {
+		ret = framer_get_status(framer, &framer->prev_status);
+		if (ret < 0) {
+			dev_warn(&framer->dev, "framer get status failed --> %d\n", ret);
+			/* Will be retried on polling_work */
+			ret = 0;
+		}
+		queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ);
+	}
+
+	framer_pm_runtime_put(framer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_init);
+
+/**
+ * framer_exit - Framer internal un-initialization
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called after framer_power_off().
+ */
+int framer_exit(struct framer *framer)
+{
+	int ret;
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		return ret;
+	ret = 0; /* Override possible ret == -EOPNOTSUPP */
+
+	mutex_lock(&framer->mutex);
+	--framer->init_count;
+	if (framer->init_count == 0) {
+		if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) {
+			mutex_unlock(&framer->mutex);
+			cancel_delayed_work_sync(&framer->polling_work);
+			mutex_lock(&framer->mutex);
+		}
+
+		if (framer->ops->exit)
+			framer->ops->exit(framer);
+	}
+
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put(framer);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_exit);
+
+/**
+ * framer_power_on - Enable the framer and enter proper operation
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called after framer_init().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_power_on(struct framer *framer)
+{
+	int ret;
+
+	if (framer->pwr) {
+		ret = regulator_enable(framer->pwr);
+		if (ret)
+			return ret;
+	}
+
+	ret = framer_pm_runtime_get_sync(framer);
+	if (ret < 0 && ret != -EOPNOTSUPP)
+		goto err_pm_sync;
+
+	ret = 0; /* Override possible ret == -EOPNOTSUPP */
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count == 0 && framer->ops->power_on) {
+		ret = framer->ops->power_on(framer);
+		if (ret < 0) {
+			dev_err(&framer->dev, "framer poweron failed --> %d\n", ret);
+			goto err_pwr_on;
+		}
+	}
+	++framer->power_count;
+	mutex_unlock(&framer->mutex);
+	return 0;
+
+err_pwr_on:
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put_sync(framer);
+err_pm_sync:
+	if (framer->pwr)
+		regulator_disable(framer->pwr);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_power_on);
+
+/**
+ * framer_power_off - Disable the framer.
+ * @framer: the framer returned by framer_get()
+ *
+ * Must be called before framer_exit().
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_power_off(struct framer *framer)
+{
+	int ret;
+
+	mutex_lock(&framer->mutex);
+	if (framer->power_count == 1 && framer->ops->power_off) {
+		ret =  framer->ops->power_off(framer);
+		if (ret < 0) {
+			dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret);
+			mutex_unlock(&framer->mutex);
+			return ret;
+		}
+	}
+	--framer->power_count;
+	mutex_unlock(&framer->mutex);
+	framer_pm_runtime_put(framer);
+
+	if (framer->pwr)
+		regulator_disable(framer->pwr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(framer_power_off);
+
+/**
+ * framer_get_status() - Gets the framer status
+ * @framer: the framer returned by framer_get()
+ * @status: the status to retrieve
+ *
+ * Used to get the framer status. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_get_status(struct framer *framer, struct framer_status *status)
+{
+	int ret;
+
+	if (!framer->ops->get_status)
+		return -EOPNOTSUPP;
+
+	/* Be sure to have known values (struct padding and future extensions) */
+	memset(status, 0, sizeof(*status));
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->get_status(framer, status);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_get_status);
+
+/**
+ * framer_set_config() - Sets the framer configuration
+ * @framer: the framer returned by framer_get()
+ * @config: the configuration to set
+ *
+ * Used to set the framer configuration. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_set_config(struct framer *framer, const struct framer_config *config)
+{
+	int ret;
+
+	if (!framer->ops->set_config)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->set_config(framer, config);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_set_config);
+
+/**
+ * framer_get_config() - Gets the framer configuration
+ * @framer: the framer returned by framer_get()
+ * @config: the configuration to retrieve
+ *
+ * Used to get the framer configuration. framer_init() must have been called
+ * on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_get_config(struct framer *framer, struct framer_config *config)
+{
+	int ret;
+
+	if (!framer->ops->get_config)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&framer->mutex);
+	ret = framer->ops->get_config(framer, config);
+	mutex_unlock(&framer->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(framer_get_config);
+
+static void framer_polling_work(struct work_struct *work)
+{
+	struct framer *framer = container_of(work, struct framer, polling_work.work);
+	struct framer_status status;
+	int ret;
+
+	ret = framer_get_status(framer, &status);
+	if (ret) {
+		dev_err(&framer->dev, "polling, get status failed (%d)\n", ret);
+		goto end;
+	}
+	if (memcmp(&framer->prev_status, &status, sizeof(status))) {
+		blocking_notifier_call_chain(&framer->notifier_list,
+					     FRAMER_EVENT_STATUS, NULL);
+		memcpy(&framer->prev_status, &status, sizeof(status));
+	}
+
+end:
+	/* Re-schedule task in 1 sec */
+	queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ);
+}
+
+/**
+ * framer_notifier_register() - Registers a notifier
+ * @framer: the framer returned by framer_get()
+ * @nb: the notifier block to register
+ *
+ * Used to register a notifier block on framer events. framer_init() must have
+ * been called on the framer.
+ * The available framer events are present in enum framer_events.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_notifier_register(struct framer *framer, struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&framer->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(framer_notifier_register);
+
+/**
+ * framer_notifier_unregister() - Unregisters a notifier
+ * @framer: the framer returned by framer_get()
+ * @nb: the notifier block to unregister
+ *
+ * Used to unregister a notifier block. framer_init() must have
+ * been called on the framer.
+ *
+ * Return: %0 if successful, a negative error code otherwise
+ */
+int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&framer->notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(framer_notifier_unregister);
+
+static struct framer_provider *framer_provider_of_lookup(const struct device_node *node)
+{
+	struct framer_provider *framer_provider;
+
+	list_for_each_entry(framer_provider, &framer_provider_list, list) {
+		if (device_match_of_node(framer_provider->dev, node))
+			return framer_provider;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static struct framer *framer_of_get_from_provider(struct of_phandle_args *args)
+{
+	struct framer_provider *framer_provider;
+	struct framer *framer;
+
+	mutex_lock(&framer_provider_mutex);
+	framer_provider = framer_provider_of_lookup(args->np);
+	if (IS_ERR(framer_provider) || !try_module_get(framer_provider->owner)) {
+		framer = ERR_PTR(-EPROBE_DEFER);
+		goto end;
+	}
+
+	framer = framer_provider->of_xlate(framer_provider->dev, args);
+
+	module_put(framer_provider->owner);
+
+end:
+	mutex_unlock(&framer_provider_mutex);
+
+	return framer;
+}
+
+static struct framer *framer_of_get_byphandle(struct device_node *np, const char *propname,
+					      int index)
+{
+	struct of_phandle_args args;
+	struct framer *framer;
+	int ret;
+
+	ret = of_parse_phandle_with_args(np, propname, "#framer-cells", index, &args);
+	if (ret)
+		return ERR_PTR(-ENODEV);
+
+	if (!of_device_is_available(args.np)) {
+		framer = ERR_PTR(-ENODEV);
+		goto out_node_put;
+	}
+
+	framer = framer_of_get_from_provider(&args);
+
+out_node_put:
+	of_node_put(args.np);
+
+	return framer;
+}
+
+static struct framer *framer_of_get_byparent(struct device_node *np, int index)
+{
+	struct of_phandle_args args;
+	struct framer *framer;
+
+	args.np = of_get_parent(np);
+	args.args_count = 1;
+	args.args[0] = index;
+
+	while (args.np) {
+		framer = framer_of_get_from_provider(&args);
+		if (IS_ERR(framer) && PTR_ERR(framer) != -EPROBE_DEFER) {
+			args.np = of_get_next_parent(args.np);
+			continue;
+		}
+		of_node_put(args.np);
+		return framer;
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+/**
+ * framer_get() - lookup and obtain a reference to a framer.
+ * @dev: device that requests the framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Returns the framer driver, after getting a refcount to it; or
+ * -ENODEV if there is no such framer. The caller is responsible for
+ * calling framer_put() to release that count.
+ */
+struct framer *framer_get(struct device *dev, const char *con_id)
+{
+	struct framer *framer = ERR_PTR(-ENODEV);
+	struct device_link *link;
+	int ret;
+
+	if (dev->of_node) {
+		if (con_id)
+			framer = framer_of_get_byphandle(dev->of_node, con_id, 0);
+		else
+			framer = framer_of_get_byparent(dev->of_node, 0);
+	}
+
+	if (IS_ERR(framer))
+		return framer;
+
+	get_device(&framer->dev);
+
+	if (!try_module_get(framer->ops->owner)) {
+		ret = -EPROBE_DEFER;
+		goto err_put_device;
+	}
+
+	link = device_link_add(dev, &framer->dev, DL_FLAG_STATELESS);
+	if (!link) {
+		dev_err(dev, "failed to create device_link to %s\n", dev_name(&framer->dev));
+		ret = -EPROBE_DEFER;
+		goto err_module_put;
+	}
+
+	return framer;
+
+err_module_put:
+	module_put(framer->ops->owner);
+err_put_device:
+	put_device(&framer->dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(framer_get);
+
+/**
+ * framer_put() - release the framer
+ * @dev: device that wants to release this framer
+ * @framer: the framer returned by framer_get()
+ *
+ * Releases a refcount the caller received from framer_get().
+ */
+void framer_put(struct device *dev, struct framer *framer)
+{
+	device_link_remove(dev, &framer->dev);
+
+	module_put(framer->ops->owner);
+	put_device(&framer->dev);
+}
+EXPORT_SYMBOL_GPL(framer_put);
+
+static void devm_framer_put(struct device *dev, void *res)
+{
+	struct framer *framer = *(struct framer **)res;
+
+	framer_put(dev, framer);
+}
+
+/**
+ * devm_framer_get() - lookup and obtain a reference to a framer.
+ * @dev: device that requests this framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Gets the framer using framer_get(), and associates a device with it using
+ * devres. On driver detach, framer_put() function is invoked on the devres
+ * data, then, devres data is freed.
+ */
+struct framer *devm_framer_get(struct device *dev, const char *con_id)
+{
+	struct framer **ptr, *framer;
+
+	ptr = devres_alloc(devm_framer_put, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	framer = framer_get(dev, con_id);
+	if (!IS_ERR(framer)) {
+		*ptr = framer;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+		return framer;
+	}
+
+	return framer;
+}
+EXPORT_SYMBOL_GPL(devm_framer_get);
+
+/**
+ * devm_framer_optional_get() - lookup and obtain a reference to an optional
+ * framer.
+ * @dev: device that requests this framer
+ * @con_id: name of the framer from device's point of view
+ *
+ * Same as devm_framer_get() except that if the framer does not exist, it is not
+ * considered an error and -ENODEV will not be returned. Instead the NULL framer
+ * is returned.
+ */
+struct framer *devm_framer_optional_get(struct device *dev, const char *con_id)
+{
+	struct framer *framer = devm_framer_get(dev, con_id);
+
+	if (PTR_ERR(framer) == -ENODEV)
+		framer = NULL;
+
+	return framer;
+}
+EXPORT_SYMBOL_GPL(devm_framer_optional_get);
+
+static void framer_notify_status_work(struct work_struct *work)
+{
+	struct framer *framer = container_of(work, struct framer, notify_status_work);
+
+	blocking_notifier_call_chain(&framer->notifier_list, FRAMER_EVENT_STATUS, NULL);
+}
+
+void framer_notify_status_change(struct framer *framer)
+{
+	/* Can be called from atomic context -> just schedule a task to call
+	 * blocking notifiers
+	 */
+	queue_work(system_power_efficient_wq, &framer->notify_status_work);
+}
+EXPORT_SYMBOL_GPL(framer_notify_status_change);
+
+/**
+ * framer_create() - create a new framer
+ * @dev: device that is creating the new framer
+ * @node: device node of the framer. default to dev->of_node.
+ * @ops: function pointers for performing framer operations
+ *
+ * Called to create a framer using framer framework.
+ */
+struct framer *framer_create(struct device *dev, struct device_node *node,
+			     const struct framer_ops *ops)
+{
+	int ret;
+	int id;
+	struct framer *framer;
+
+	if (WARN_ON(!dev))
+		return ERR_PTR(-EINVAL);
+
+	/* get_status() is mandatory if the provider ask for polling status */
+	if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status))
+		return ERR_PTR(-EINVAL);
+
+	framer = kzalloc(sizeof(*framer), GFP_KERNEL);
+	if (!framer)
+		return ERR_PTR(-ENOMEM);
+
+	id = ida_simple_get(&framer_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(dev, "unable to get id\n");
+		ret = id;
+		goto free_framer;
+	}
+
+	device_initialize(&framer->dev);
+	mutex_init(&framer->mutex);
+	INIT_WORK(&framer->notify_status_work, framer_notify_status_work);
+	INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work);
+	BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list);
+
+	framer->dev.class = framer_class;
+	framer->dev.parent = dev;
+	framer->dev.of_node = node ? node : dev->of_node;
+	framer->id = id;
+	framer->ops = ops;
+
+	ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id);
+	if (ret)
+		goto put_dev;
+
+	/* framer-supply */
+	framer->pwr = regulator_get_optional(&framer->dev, "framer");
+	if (IS_ERR(framer->pwr)) {
+		ret = PTR_ERR(framer->pwr);
+		if (ret == -EPROBE_DEFER)
+			goto put_dev;
+
+		framer->pwr = NULL;
+	}
+
+	ret = device_add(&framer->dev);
+	if (ret)
+		goto put_dev;
+
+	if (pm_runtime_enabled(dev)) {
+		pm_runtime_enable(&framer->dev);
+		pm_runtime_no_callbacks(&framer->dev);
+	}
+
+	return framer;
+
+put_dev:
+	put_device(&framer->dev);  /* calls framer_release() which frees resources */
+	return ERR_PTR(ret);
+
+free_framer:
+	kfree(framer);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(framer_create);
+
+/**
+ * framer_destroy() - destroy the framer
+ * @framer: the framer to be destroyed
+ *
+ * Called to destroy the framer.
+ */
+void framer_destroy(struct framer *framer)
+{
+	/* polling_work should already be stopped but if framer_exit() was not
+	 * called (bug), here it's the last time to do that ...
+	 */
+	cancel_delayed_work_sync(&framer->polling_work);
+	cancel_work_sync(&framer->notify_status_work);
+	pm_runtime_disable(&framer->dev);
+	device_unregister(&framer->dev); /* calls framer_release() which frees resources */
+}
+EXPORT_SYMBOL_GPL(framer_destroy);
+
+static void devm_framer_destroy(struct device *dev, void *res)
+{
+	struct framer *framer = *(struct framer **)res;
+
+	framer_destroy(framer);
+}
+
+/**
+ * devm_framer_create() - create a new framer
+ * @dev: device that is creating the new framer
+ * @node: device node of the framer
+ * @ops: function pointers for performing framer operations
+ *
+ * Creates a new framer device adding it to the framer class.
+ * While at that, it also associates the device with the framer using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct framer *devm_framer_create(struct device *dev, struct device_node *node,
+				  const struct framer_ops *ops)
+{
+	struct framer **ptr, *framer;
+
+	ptr = devres_alloc(devm_framer_destroy, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	framer = framer_create(dev, node, ops);
+	if (!IS_ERR(framer)) {
+		*ptr = framer;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return framer;
+}
+EXPORT_SYMBOL_GPL(devm_framer_create);
+
+/**
+ * framer_provider_simple_of_xlate() - returns the framer instance from framer provider
+ * @dev: the framer provider device
+ * @args: of_phandle_args (not used here)
+ *
+ * Intended to be used by framer provider for the common case where #framer-cells is
+ * 0. For other cases where #framer-cells is greater than '0', the framer provider
+ * should provide a custom of_xlate function that reads the *args* and returns
+ * the appropriate framer.
+ */
+struct framer *framer_provider_simple_of_xlate(struct device *dev, struct of_phandle_args *args)
+{
+	struct framer *framer;
+	struct class_dev_iter iter;
+
+	class_dev_iter_init(&iter, framer_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		framer = dev_to_framer(dev);
+		if (args->np != framer->dev.of_node)
+			continue;
+
+		class_dev_iter_exit(&iter);
+		return framer;
+	}
+
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(framer_provider_simple_of_xlate);
+
+/**
+ * __framer_provider_of_register() - create/register framer provider with the framework
+ * @dev: struct device of the framer provider
+ * @owner: the module owner containing of_xlate
+ * @of_xlate: function pointer to obtain framer instance from framer provider
+ *
+ * Creates struct framer_provider from dev and of_xlate function pointer.
+ * This is used in the case of dt boot for finding the framer instance from
+ * framer provider.
+ */
+struct framer_provider *
+__framer_provider_of_register(struct device *dev, struct module *owner,
+			      struct framer *(*of_xlate)(struct device *dev,
+							 struct of_phandle_args *args))
+{
+	struct framer_provider *framer_provider;
+
+	framer_provider = kzalloc(sizeof(*framer_provider), GFP_KERNEL);
+	if (!framer_provider)
+		return ERR_PTR(-ENOMEM);
+
+	framer_provider->dev = dev;
+	framer_provider->owner = owner;
+	framer_provider->of_xlate = of_xlate;
+
+	of_node_get(framer_provider->dev->of_node);
+
+	mutex_lock(&framer_provider_mutex);
+	list_add_tail(&framer_provider->list, &framer_provider_list);
+	mutex_unlock(&framer_provider_mutex);
+
+	return framer_provider;
+}
+EXPORT_SYMBOL_GPL(__framer_provider_of_register);
+
+/**
+ * framer_provider_of_unregister() - unregister framer provider from the framework
+ * @framer_provider: framer provider returned by framer_provider_of_register()
+ *
+ * Removes the framer_provider created using framer_provider_of_register().
+ */
+void framer_provider_of_unregister(struct framer_provider *framer_provider)
+{
+	mutex_lock(&framer_provider_mutex);
+	list_del(&framer_provider->list);
+	of_node_put(framer_provider->dev->of_node);
+	kfree(framer_provider);
+	mutex_unlock(&framer_provider_mutex);
+}
+EXPORT_SYMBOL_GPL(framer_provider_of_unregister);
+
+static void devm_framer_provider_of_unregister(struct device *dev, void *res)
+{
+	struct framer_provider *framer_provider = *(struct framer_provider **)res;
+
+	framer_provider_of_unregister(framer_provider);
+}
+
+/**
+ * __devm_framer_provider_of_register() - create/register framer provider with
+ * the framework
+ * @dev: struct device of the framer provider
+ * @owner: the module owner containing of_xlate
+ * @of_xlate: function pointer to obtain framer instance from framer provider
+ *
+ * Creates struct framer_provider from dev and of_xlate function pointer.
+ * This is used in the case of dt boot for finding the framer instance from
+ * framer provider. While at that, it also associates the device with the
+ * framer provider using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ */
+struct framer_provider *
+__devm_framer_provider_of_register(struct device *dev, struct module *owner,
+				   struct framer *(*of_xlate)(struct device *dev,
+							      struct of_phandle_args *args))
+{
+	struct framer_provider **ptr, *framer_provider;
+
+	ptr = devres_alloc(devm_framer_provider_of_unregister, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	framer_provider = __framer_provider_of_register(dev, owner, of_xlate);
+	if (!IS_ERR(framer_provider)) {
+		*ptr = framer_provider;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return framer_provider;
+}
+EXPORT_SYMBOL_GPL(__devm_framer_provider_of_register);
+
+/**
+ * framer_release() - release the framer
+ * @dev: the dev member within framer
+ *
+ * When the last reference to the device is removed, it is called
+ * from the embedded kobject as release method.
+ */
+static void framer_release(struct device *dev)
+{
+	struct framer *framer;
+
+	framer = dev_to_framer(dev);
+	regulator_put(framer->pwr);
+	ida_simple_remove(&framer_ida, framer->id);
+	kfree(framer);
+}
+
+static int __init framer_core_init(void)
+{
+	framer_class = class_create("framer");
+	if (IS_ERR(framer_class)) {
+		pr_err("failed to create framer class (%pe)\n", framer_class);
+		return PTR_ERR(framer_class);
+	}
+
+	framer_class->dev_release = framer_release;
+
+	return 0;
+}
+device_initcall(framer_core_init);
diff --git a/include/linux/framer/framer-provider.h b/include/linux/framer/framer-provider.h
new file mode 100644
index 000000000000..941a343c3ba7
--- /dev/null
+++ b/include/linux/framer/framer-provider.h
@@ -0,0 +1,194 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Generic framer profider header file
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#ifndef __DRIVERS_PROVIDER_FRAMER_H
+#define __DRIVERS_PROVIDER_FRAMER_H
+
+#include <linux/export.h>
+#include <linux/framer/framer.h>
+#include <linux/types.h>
+
+#define FRAMER_FLAG_POLL_STATUS  BIT(0)
+
+/**
+ * struct framer_ops - set of function pointers for performing framer operations
+ * @init: operation to be performed for initializing the framer
+ * @exit: operation to be performed while exiting
+ * @power_on: powering on the framer
+ * @power_off: powering off the framer
+ * @flags: OR-ed flags (FRAMER_FLAG_*) to ask for core functionality
+ *          - @FRAMER_FLAG_POLL_STATUS:
+ *            Ask the core to perfom a polling to get the framer status and
+ *            notify consumers on change.
+ *            The framer should call @framer_notify_status_change() when it
+ *            detects a status change. This is usally done using interrutps.
+ *            If the framer cannot detect this change, it can ask the core for
+ *            a status polling. The core will call @get_status() periodically
+ *            and, on change detected, it will notify the consumer.
+ *            the @get_status()
+ * @owner: the module owner containing the ops
+ */
+struct framer_ops {
+	int	(*init)(struct framer *framer);
+	void	(*exit)(struct framer *framer);
+	int	(*power_on)(struct framer *framer);
+	int	(*power_off)(struct framer *framer);
+
+	/**
+	 * @get_status:
+	 *
+	 * Optional.
+	 *
+	 * Used to get the framer status. framer_init() must have
+	 * been called on the framer.
+	 *
+	 * Returns: 0 if successful, an negative error code otherwise
+	 */
+	int	(*get_status)(struct framer *framer, struct framer_status *status);
+
+	/**
+	 * @set_config:
+	 *
+	 * Optional.
+	 *
+	 * Used to set the framer configuration. framer_init() must have
+	 * been called on the framer.
+	 *
+	 * Returns: 0 if successful, an negative error code otherwise
+	 */
+	int	(*set_config)(struct framer *framer, const struct framer_config *config);
+
+	/**
+	 * @get_config:
+	 *
+	 * Optional.
+	 *
+	 * Used to get the framer configuration. framer_init() must have
+	 * been called on the framer.
+	 *
+	 * Returns: 0 if successful, an negative error code otherwise
+	 */
+	int	(*get_config)(struct framer *framer, struct framer_config *config);
+
+	u32 flags;
+	struct module *owner;
+};
+
+/**
+ * struct framer_provider - represents the framer provider
+ * @dev: framer provider device
+ * @children: can be used to override the default (dev->of_node) child node
+ * @owner: the module owner having of_xlate
+ * @list: to maintain a linked list of framer providers
+ * @of_xlate: function pointer to obtain framer instance from framer pointer
+ */
+struct framer_provider {
+	struct device		*dev;
+	struct module		*owner;
+	struct list_head	list;
+	struct framer * (*of_xlate)(struct device *dev,
+				    struct of_phandle_args *args);
+};
+
+static inline void framer_set_drvdata(struct framer *framer, void *data)
+{
+	dev_set_drvdata(&framer->dev, data);
+}
+
+static inline void *framer_get_drvdata(struct framer *framer)
+{
+	return dev_get_drvdata(&framer->dev);
+}
+
+#if IS_ENABLED(CONFIG_GENERIC_FRAMER)
+
+/* Create and destroy a framer */
+struct framer *framer_create(struct device *dev, struct device_node *node,
+			     const struct framer_ops *ops);
+void framer_destroy(struct framer *framer);
+
+/* devm version */
+struct framer *devm_framer_create(struct device *dev, struct device_node *node,
+				  const struct framer_ops *ops);
+
+struct framer *framer_provider_simple_of_xlate(struct device *dev,
+					       struct of_phandle_args *args);
+
+struct framer_provider *
+__framer_provider_of_register(struct device *dev, struct module *owner,
+			      struct framer *(*of_xlate)(struct device *dev,
+							 struct of_phandle_args *args));
+
+void framer_provider_of_unregister(struct framer_provider *framer_provider);
+
+struct framer_provider *
+__devm_framer_provider_of_register(struct device *dev, struct module *owner,
+				   struct framer *(*of_xlate)(struct device *dev,
+							      struct of_phandle_args *args));
+
+void framer_notify_status_change(struct framer *framer);
+
+#else /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */
+
+static inline struct framer *framer_create(struct device *dev, struct device_node *node,
+					   const struct framer_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline void framer_destroy(struct framer *framer)
+{
+}
+
+/* devm version */
+static inline struct framer *devm_framer_create(struct device *dev, struct device_node *node,
+						const struct framer_ops *ops)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct framer *framer_provider_simple_of_xlate(struct device *dev,
+							     struct of_phandle_args *args)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct framer_provider *
+__framer_provider_of_register(struct device *dev, struct module *owner,
+			      struct framer *(*of_xlate)(struct device *dev,
+							 struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+void framer_provider_of_unregister(struct framer_provider *framer_provider)
+{
+}
+
+static inline struct framer_provider *
+__devm_framer_provider_of_register(struct device *dev, struct module *owner,
+				   struct framer *(*of_xlate)(struct device *dev,
+							      struct of_phandle_args *args))
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+void framer_notify_status_change(struct framer *framer)
+{
+}
+
+#endif /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */
+
+#define framer_provider_of_register(dev, xlate)		\
+	__framer_provider_of_register((dev), THIS_MODULE, (xlate))
+
+#define devm_framer_provider_of_register(dev, xlate)	\
+	__devm_framer_provider_of_register((dev), THIS_MODULE, (xlate))
+
+#endif /* __DRIVERS_PROVIDER_FRAMER_H */
diff --git a/include/linux/framer/framer.h b/include/linux/framer/framer.h
new file mode 100644
index 000000000000..0bee7135142f
--- /dev/null
+++ b/include/linux/framer/framer.h
@@ -0,0 +1,199 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Generic framer header file
+ *
+ * Copyright 2023 CS GROUP France
+ *
+ * Author: Herve Codina <herve.codina@bootlin.com>
+ */
+
+#ifndef __DRIVERS_FRAMER_H
+#define __DRIVERS_FRAMER_H
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+
+/**
+ * enum framer_iface - Framer interface
+ */
+enum framer_iface {
+	FRAMER_IFACE_E1,      /* E1 interface */
+	FRAMER_IFACE_T1,      /* T1 interface */
+};
+
+/**
+ * enum framer_clock_mode - Framer clock mode
+ */
+enum framer_clock_type {
+	FRAMER_CLOCK_EXT, /* External clock */
+	FRAMER_CLOCK_INT, /* Internal clock */
+};
+
+/**
+ * struct framer_configuration - Framer configuration
+ * @line_iface: Framer line interface
+ * @clock_mode: Framer clock type
+ * @clock_rate: Framer clock rate
+ */
+struct framer_config {
+	enum framer_iface iface;
+	enum framer_clock_type clock_type;
+	unsigned long line_clock_rate;
+};
+
+/**
+ * struct framer_status - Framer status
+ * @link_is_on: Framer link state. true, the link is on, false, the link is off.
+ */
+struct framer_status {
+	bool link_is_on;
+};
+
+/**
+ * framer_event - event available for notification
+ */
+enum framer_event {
+	FRAMER_EVENT_STATUS,	/* Event notified on framer_status changes */
+};
+
+/**
+ * struct framer - represents the framer device
+ * @dev: framer device
+ * @id: id of the framer device
+ * @ops: function pointers for performing framer operations
+ * @mutex: mutex to protect framer_ops
+ * @init_count: used to protect when the framer is used by multiple consumers
+ * @power_count: used to protect when the framer is used by multiple consumers
+ * @pwr: power regulator associated with the framer
+ * @polling_task: polling task used if framer notifier operations are not provided
+ * @polling_notifier_list: notifier list used by the polling task
+ * @prev_status: previous read status used by the polling task to detect changes
+ */
+struct framer {
+	struct device			dev;
+	int				id;
+	const struct framer_ops		*ops;
+	struct mutex			mutex;	/* Protect framer */
+	int				init_count;
+	int				power_count;
+	struct regulator		*pwr;
+	struct work_struct		notify_status_work;
+	struct blocking_notifier_head	notifier_list;
+	struct delayed_work		polling_work;
+	struct framer_status		prev_status;
+};
+
+#if IS_ENABLED(CONFIG_GENERIC_FRAMER)
+int framer_pm_runtime_get(struct framer *framer);
+int framer_pm_runtime_get_sync(struct framer *framer);
+int framer_pm_runtime_put(struct framer *framer);
+int framer_pm_runtime_put_sync(struct framer *framer);
+int framer_init(struct framer *framer);
+int framer_exit(struct framer *framer);
+int framer_power_on(struct framer *framer);
+int framer_power_off(struct framer *framer);
+int framer_get_status(struct framer *framer, struct framer_status *status);
+int framer_get_config(struct framer *framer, struct framer_config *config);
+int framer_set_config(struct framer *framer, const struct framer_config *config);
+int framer_notifier_register(struct framer *framer, struct notifier_block *nb);
+int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb);
+
+struct framer *framer_get(struct device *dev, const char *con_id);
+void framer_put(struct device *dev, struct framer *framer);
+
+struct framer *devm_framer_get(struct device *dev, const char *con_id);
+struct framer *devm_framer_optional_get(struct device *dev, const char *con_id);
+#else
+static inline int framer_pm_runtime_get(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_pm_runtime_get_sync(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_pm_runtime_put(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_pm_runtime_put_sync(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_init(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_exit(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_power_on(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_power_off(struct framer *framer)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_get_status(struct framer *framer, struct framer_status *status)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_get_config(struct framer *framer, struct framer_config *config)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_set_config(struct framer *framer, const struct framer_config *config)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_notifier_register(struct framer *framer,
+					   struct notifier_block *nb)
+{
+	return -ENOSYS;
+}
+
+static inline int framer_notifier_unregister(struct framer *framer,
+					     struct notifier_block *nb)
+{
+	return -ENOSYS;
+}
+
+struct framer *framer_get(struct device *dev, const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+void framer_put(struct device *dev, struct framer *framer)
+{
+}
+
+static inline struct framer *devm_framer_get(struct device *dev, const char *con_id)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct framer *devm_framer_optional_get(struct device *dev, const char *con_id)
+{
+	return NULL;
+}
+
+#endif
+
+#endif /* __DRIVERS_FRAMER_H */