| Message ID | 20230818193546.2014874-18-bvanassche@acm.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Improve performance for zoned UFS devices | expand |
On 8/18/2023 12:34 PM, Bart Van Assche wrote: > UFSHCI 3.0 controllers do not preserve the write order if auto-hibernation > is enabled. If the write order is not preserved, an I/O scheduler is > required to serialize zoned writes. Hence do not allow auto-hibernation > to be enabled without I/O scheduler if a zoned logical unit is present > and if the controller is operating in legacy mode. This patch has been > tested with the following shell script: > Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
On 8/19/2023 3:34 AM, Bart Van Assche wrote: > UFSHCI 3.0 controllers do not preserve the write order if auto-hibernation > is enabled. If the write order is not preserved, an I/O scheduler is > required to serialize zoned writes. Hence do not allow auto-hibernation > to be enabled without I/O scheduler if a zoned logical unit is present > and if the controller is operating in legacy mode. This patch has been > tested with the following shell script: > > show_ah8() { > echo -n "auto_hibern8: " > adb shell "cat /sys/devices/platform/13200000.ufs/auto_hibern8" > } > > set_ah8() { > local rc > adb shell "echo $1 > /sys/devices/platform/13200000.ufs/auto_hibern8" > rc=$? > show_ah8 > return $rc > } > > set_iosched() { > adb shell "echo $1 >/sys/class/block/$zoned_bdev/queue/scheduler && > echo -n 'I/O scheduler: ' && > cat /sys/class/block/sde/queue/scheduler" > } > > adb root > zoned_bdev=$(adb shell grep -lvw 0 /sys/class/block/sd*/queue/chunk_sectors |& > sed 's|/sys/class/block/||g;s|/queue/chunk_sectors||g') > [ -n "$zoned_bdev" ] > show_ah8 > set_ah8 0 > set_iosched none > if set_ah8 150000; then > echo "Error: enabled AH8 without I/O scheduler" > fi > set_iosched mq-deadline > set_ah8 150000 > > Cc: Martin K. Petersen <martin.petersen@oracle.com> > Cc: Can Guo <quic_cang@quicinc.com> > Cc: Avri Altman <avri.altman@wdc.com> > Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com> > Signed-off-by: Bart Van Assche <bvanassche@acm.org> > --- > drivers/ufs/core/ufshcd.c | 58 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) Reviewed-by: Can Guo <quic_cang@quicinc.com>
On 8/19/2023 3:34 AM, Bart Van Assche wrote: > UFSHCI 3.0 controllers do not preserve the write order if auto-hibernation > is enabled. If the write order is not preserved, an I/O scheduler is > required to serialize zoned writes. Hence do not allow auto-hibernation > to be enabled without I/O scheduler if a zoned logical unit is present > and if the controller is operating in legacy mode. This patch has been > tested with the following shell script: > > show_ah8() { > echo -n "auto_hibern8: " > adb shell "cat /sys/devices/platform/13200000.ufs/auto_hibern8" > } > > set_ah8() { > local rc > adb shell "echo $1 > /sys/devices/platform/13200000.ufs/auto_hibern8" > rc=$? > show_ah8 > return $rc > } > > set_iosched() { > adb shell "echo $1 >/sys/class/block/$zoned_bdev/queue/scheduler && > echo -n 'I/O scheduler: ' && > cat /sys/class/block/sde/queue/scheduler" > } > > adb root > zoned_bdev=$(adb shell grep -lvw 0 /sys/class/block/sd*/queue/chunk_sectors |& > sed 's|/sys/class/block/||g;s|/queue/chunk_sectors||g') > [ -n "$zoned_bdev" ] > show_ah8 > set_ah8 0 > set_iosched none > if set_ah8 150000; then > echo "Error: enabled AH8 without I/O scheduler" > fi > set_iosched mq-deadline > set_ah8 150000 > > Cc: Martin K. Petersen <martin.petersen@oracle.com> > Cc: Can Guo <quic_cang@quicinc.com> > Cc: Avri Altman <avri.altman@wdc.com> > Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com> > Signed-off-by: Bart Van Assche <bvanassche@acm.org> > --- > drivers/ufs/core/ufshcd.c | 58 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > Reviewed-by: Can Guo <quic_cang@quicinc.com>
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 68bf8e94eee6..c28a362b5b99 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -4337,6 +4337,30 @@ int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) } EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit); +static int ufshcd_update_preserves_write_order(struct ufs_hba *hba, + bool preserves_write_order) +{ + struct scsi_device *sdev; + + if (!preserves_write_order) { + shost_for_each_device(sdev, hba->host) { + struct request_queue *q = sdev->request_queue; + + /* + * Refuse to enable auto-hibernation if no I/O scheduler + * is present. This code does not check whether the + * attached I/O scheduler serializes zoned writes + * (ELEVATOR_F_ZBD_SEQ_WRITE) because this cannot be + * checked from outside the block layer core. + */ + if (blk_queue_is_zoned(q) && !q->elevator) + return -EPERM; + } + } + + return 0; +} + static void ufshcd_configure_auto_hibern8(struct ufs_hba *hba) { if (!ufshcd_is_auto_hibern8_supported(hba)) @@ -4345,13 +4369,40 @@ static void ufshcd_configure_auto_hibern8(struct ufs_hba *hba) ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER); } +/** + * ufshcd_auto_hibern8_update() - Modify the auto-hibernation control register + * @hba: per-adapter instance + * @ahit: New auto-hibernate settings. Includes the scale and the value of the + * auto-hibernation timer. See also the UFSHCI_AHIBERN8_TIMER_MASK and + * UFSHCI_AHIBERN8_SCALE_MASK constants. + * + * A note: UFSHCI controllers do not preserve the command order in legacy mode + * if auto-hibernation is enabled. If the command order is not preserved, an + * I/O scheduler that serializes zoned writes (mq-deadline) is required if a + * zoned logical unit is present. Enabling auto-hibernation without attaching + * the mq-deadline scheduler first may cause unaligned write errors for the + * zoned logical unit if a zoned logical unit is present. + */ int ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit) { const u32 cur_ahit = READ_ONCE(hba->ahit); + bool prev_state, new_state; + int ret; if (!ufshcd_is_auto_hibern8_supported(hba) || cur_ahit == ahit) return 0; + prev_state = FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, cur_ahit); + new_state = FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, ahit); + + if (!is_mcq_enabled(hba) && !prev_state && new_state) { + /* + * Auto-hibernation will be enabled for legacy UFSHCI mode. + */ + ret = ufshcd_update_preserves_write_order(hba, false); + if (ret) + return ret; + } WRITE_ONCE(hba->ahit, ahit); if (!pm_runtime_suspended(&hba->ufs_device_wlun->sdev_gendev)) { ufshcd_rpm_get_sync(hba); @@ -4360,6 +4411,13 @@ int ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit) ufshcd_release(hba); ufshcd_rpm_put_sync(hba); } + if (!is_mcq_enabled(hba) && prev_state && !new_state) { + /* + * Auto-hibernation has been disabled. + */ + ret = ufshcd_update_preserves_write_order(hba, true); + WARN_ON_ONCE(ret); + } return 0; }
UFSHCI 3.0 controllers do not preserve the write order if auto-hibernation is enabled. If the write order is not preserved, an I/O scheduler is required to serialize zoned writes. Hence do not allow auto-hibernation to be enabled without I/O scheduler if a zoned logical unit is present and if the controller is operating in legacy mode. This patch has been tested with the following shell script: show_ah8() { echo -n "auto_hibern8: " adb shell "cat /sys/devices/platform/13200000.ufs/auto_hibern8" } set_ah8() { local rc adb shell "echo $1 > /sys/devices/platform/13200000.ufs/auto_hibern8" rc=$? show_ah8 return $rc } set_iosched() { adb shell "echo $1 >/sys/class/block/$zoned_bdev/queue/scheduler && echo -n 'I/O scheduler: ' && cat /sys/class/block/sde/queue/scheduler" } adb root zoned_bdev=$(adb shell grep -lvw 0 /sys/class/block/sd*/queue/chunk_sectors |& sed 's|/sys/class/block/||g;s|/queue/chunk_sectors||g') [ -n "$zoned_bdev" ] show_ah8 set_ah8 0 set_iosched none if set_ah8 150000; then echo "Error: enabled AH8 without I/O scheduler" fi set_iosched mq-deadline set_ah8 150000 Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Can Guo <quic_cang@quicinc.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- drivers/ufs/core/ufshcd.c | 58 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+)