| Message ID | 20230821031737.1973183-12-lizetao1@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [-next,v3,01/12] mtd: spear_smi: Use helper function devm_clk_get_enabled() | expand |
Hi Tudor, lizetao1@huawei.com wrote on Mon, 21 Aug 2023 11:17:36 +0800: > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be > replaced by devm_clk_get_enabled() when driver enables (and possibly > prepares) the clocks for the whole lifetime of the device. Moreover, it is > no longer necessary to unprepare and disable the clocks explicitly, so drop > the label "dis_clks" and "dis_clk_reg". This patch seems very simple, do you mind if I apply it directly into mtd/next for the next PR? Thanks, Miquèl > Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> > Signed-off-by: Li Zetao <lizetao1@huawei.com> > --- > v2 -> v3: Modify the syntax error in the commit message. > v2: https://lore.kernel.org/all/20230818074642.308166-12-lizetao1@huawei.com/ > v1 -> v2: Modify commit message. > v1: https://lore.kernel.org/all/20230817024509.3951629-12-lizetao1@huawei.com/ > > drivers/mtd/spi-nor/controllers/nxp-spifi.c | 33 ++++----------------- > 1 file changed, 6 insertions(+), 27 deletions(-) > > diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c > index 337e83bf3362..5d8f47ab146f 100644 > --- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c > +++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c > @@ -394,30 +394,18 @@ static int nxp_spifi_probe(struct platform_device *pdev) > if (IS_ERR(spifi->flash_base)) > return PTR_ERR(spifi->flash_base); > > - spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi"); > + spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi"); > if (IS_ERR(spifi->clk_spifi)) { > - dev_err(&pdev->dev, "spifi clock not found\n"); > + dev_err(&pdev->dev, "spifi clock not found or unable to enable\n"); > return PTR_ERR(spifi->clk_spifi); > } > > - spifi->clk_reg = devm_clk_get(&pdev->dev, "reg"); > + spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg"); > if (IS_ERR(spifi->clk_reg)) { > - dev_err(&pdev->dev, "reg clock not found\n"); > + dev_err(&pdev->dev, "reg clock not found or unable to enable\n"); > return PTR_ERR(spifi->clk_reg); > } > > - ret = clk_prepare_enable(spifi->clk_reg); > - if (ret) { > - dev_err(&pdev->dev, "unable to enable reg clock\n"); > - return ret; > - } > - > - ret = clk_prepare_enable(spifi->clk_spifi); > - if (ret) { > - dev_err(&pdev->dev, "unable to enable spifi clock\n"); > - goto dis_clk_reg; > - } > - > spifi->dev = &pdev->dev; > platform_set_drvdata(pdev, spifi); > > @@ -430,24 +418,17 @@ static int nxp_spifi_probe(struct platform_device *pdev) > flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); > if (!flash_np) { > dev_err(&pdev->dev, "no SPI flash device to configure\n"); > - ret = -ENODEV; > - goto dis_clks; > + return -ENODEV; > } > > ret = nxp_spifi_setup_flash(spifi, flash_np); > of_node_put(flash_np); > if (ret) { > dev_err(&pdev->dev, "unable to setup flash chip\n"); > - goto dis_clks; > + return ret; > } > > return 0; > - > -dis_clks: > - clk_disable_unprepare(spifi->clk_spifi); > -dis_clk_reg: > - clk_disable_unprepare(spifi->clk_reg); > - return ret; > } > > static int nxp_spifi_remove(struct platform_device *pdev) > @@ -455,8 +436,6 @@ static int nxp_spifi_remove(struct platform_device *pdev) > struct nxp_spifi *spifi = platform_get_drvdata(pdev); > > mtd_device_unregister(&spifi->nor.mtd); > - clk_disable_unprepare(spifi->clk_spifi); > - clk_disable_unprepare(spifi->clk_reg); > > return 0; > }
Hi again, miquel.raynal@bootlin.com wrote on Mon, 21 Aug 2023 09:38:25 +0200: > Hi Tudor, > > lizetao1@huawei.com wrote on Mon, 21 Aug 2023 11:17:36 +0800: > > > Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared > > and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be > > replaced by devm_clk_get_enabled() when driver enables (and possibly > > prepares) the clocks for the whole lifetime of the device. Moreover, it is > > no longer necessary to unprepare and disable the clocks explicitly, so drop > > the label "dis_clks" and "dis_clk_reg". > > This patch seems very simple, do you mind if I apply it directly into > mtd/next for the next PR? I see you already took that one, perfect ;-) Sorry for the noise. Thanks, Miquèl
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c index 337e83bf3362..5d8f47ab146f 100644 --- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c +++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c @@ -394,30 +394,18 @@ static int nxp_spifi_probe(struct platform_device *pdev) if (IS_ERR(spifi->flash_base)) return PTR_ERR(spifi->flash_base); - spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi"); + spifi->clk_spifi = devm_clk_get_enabled(&pdev->dev, "spifi"); if (IS_ERR(spifi->clk_spifi)) { - dev_err(&pdev->dev, "spifi clock not found\n"); + dev_err(&pdev->dev, "spifi clock not found or unable to enable\n"); return PTR_ERR(spifi->clk_spifi); } - spifi->clk_reg = devm_clk_get(&pdev->dev, "reg"); + spifi->clk_reg = devm_clk_get_enabled(&pdev->dev, "reg"); if (IS_ERR(spifi->clk_reg)) { - dev_err(&pdev->dev, "reg clock not found\n"); + dev_err(&pdev->dev, "reg clock not found or unable to enable\n"); return PTR_ERR(spifi->clk_reg); } - ret = clk_prepare_enable(spifi->clk_reg); - if (ret) { - dev_err(&pdev->dev, "unable to enable reg clock\n"); - return ret; - } - - ret = clk_prepare_enable(spifi->clk_spifi); - if (ret) { - dev_err(&pdev->dev, "unable to enable spifi clock\n"); - goto dis_clk_reg; - } - spifi->dev = &pdev->dev; platform_set_drvdata(pdev, spifi); @@ -430,24 +418,17 @@ static int nxp_spifi_probe(struct platform_device *pdev) flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); if (!flash_np) { dev_err(&pdev->dev, "no SPI flash device to configure\n"); - ret = -ENODEV; - goto dis_clks; + return -ENODEV; } ret = nxp_spifi_setup_flash(spifi, flash_np); of_node_put(flash_np); if (ret) { dev_err(&pdev->dev, "unable to setup flash chip\n"); - goto dis_clks; + return ret; } return 0; - -dis_clks: - clk_disable_unprepare(spifi->clk_spifi); -dis_clk_reg: - clk_disable_unprepare(spifi->clk_reg); - return ret; } static int nxp_spifi_remove(struct platform_device *pdev) @@ -455,8 +436,6 @@ static int nxp_spifi_remove(struct platform_device *pdev) struct nxp_spifi *spifi = platform_get_drvdata(pdev); mtd_device_unregister(&spifi->nor.mtd); - clk_disable_unprepare(spifi->clk_spifi); - clk_disable_unprepare(spifi->clk_reg); return 0; }
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be replaced by devm_clk_get_enabled() when driver enables (and possibly prepares) the clocks for the whole lifetime of the device. Moreover, it is no longer necessary to unprepare and disable the clocks explicitly, so drop the label "dis_clks" and "dis_clk_reg". Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Li Zetao <lizetao1@huawei.com> --- v2 -> v3: Modify the syntax error in the commit message. v2: https://lore.kernel.org/all/20230818074642.308166-12-lizetao1@huawei.com/ v1 -> v2: Modify commit message. v1: https://lore.kernel.org/all/20230817024509.3951629-12-lizetao1@huawei.com/ drivers/mtd/spi-nor/controllers/nxp-spifi.c | 33 ++++----------------- 1 file changed, 6 insertions(+), 27 deletions(-)