Message ID | 20230819213040.1101044-3-ipylypiv@google.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | Returning FIS on success for CDL | expand |
On Sat, Aug 19, 2023 at 02:30:40PM -0700, Igor Pylypiv wrote: > By default PM80xx HBAs return FIS only when a drive reports an error. > The RETFIS bit forces the controller to populate FIS even when a drive > reports no error. > > Signed-off-by: Igor Pylypiv <ipylypiv@google.com> > --- > drivers/scsi/pm8001/pm8001_hwi.c | 9 ++++++--- > drivers/scsi/pm8001/pm8001_hwi.h | 2 +- > drivers/scsi/pm8001/pm80xx_hwi.c | 24 +++++++++++------------- > drivers/scsi/pm8001/pm80xx_hwi.h | 2 +- > 4 files changed, 19 insertions(+), 18 deletions(-) > > diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c > index 73cd25f30ca5..649724a1d134 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.c > +++ b/drivers/scsi/pm8001/pm8001_hwi.c > @@ -4095,7 +4095,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > u32 hdr_tag, ncg_tag = 0; > u64 phys_addr; > u32 ATAP = 0x0; > - u32 dir; > + u32 dir, retfis = 0; > u32 opc = OPC_INB_SATA_HOST_OPSTART; > > memset(&sata_cmd, 0, sizeof(sata_cmd)); > @@ -4124,8 +4124,11 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > sata_cmd.tag = cpu_to_le32(tag); > sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); > sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); > - sata_cmd.ncqtag_atap_dir_m = > - cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir); > + if (task->ata_task.return_fis_on_success) > + retfis = 1; > + sata_cmd.retfis_ncqtag_atap_dir_m = > + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | > + ((ATAP & 0x3f) << 10) | dir); > sata_cmd.sata_fis = task->ata_task.fis; > if (likely(!task->ata_task.device_control_reg_update)) > sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ > diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h > index 961d0465b923..fc2127dcb58d 100644 > --- a/drivers/scsi/pm8001/pm8001_hwi.h > +++ b/drivers/scsi/pm8001/pm8001_hwi.h > @@ -515,7 +515,7 @@ struct sata_start_req { > __le32 tag; > __le32 device_id; > __le32 data_len; > - __le32 ncqtag_atap_dir_m; > + __le32 retfis_ncqtag_atap_dir_m; > struct host_to_dev_fis sata_fis; > u32 reserved1; > u32 reserved2; > diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c > index 39a12ee94a72..a5021577a15f 100644 > --- a/drivers/scsi/pm8001/pm80xx_hwi.c > +++ b/drivers/scsi/pm8001/pm80xx_hwi.c > @@ -4457,7 +4457,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > u64 phys_addr, end_addr; > u32 end_addr_high, end_addr_low; > u32 ATAP = 0x0; > - u32 dir; > + u32 dir, retfis = 0; > u32 opc = OPC_INB_SATA_HOST_OPSTART; > memset(&sata_cmd, 0, sizeof(sata_cmd)); > > @@ -4487,7 +4487,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > sata_cmd.tag = cpu_to_le32(tag); > sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); > sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); > - > + if (task->ata_task.return_fis_on_success) > + retfis = 1; > sata_cmd.sata_fis = task->ata_task.fis; > if (likely(!task->ata_task.device_control_reg_update)) > sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ > @@ -4500,12 +4501,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n", > sata_cmd.sata_fis.command); > opc = OPC_INB_SATA_DIF_ENC_IO; > - > - /* set encryption bit */ > - sata_cmd.ncqtag_atap_dir_m_dad = > - cpu_to_le32(((ncg_tag & 0xff)<<16)| > - ((ATAP & 0x3f) << 10) | 0x20 | dir); > - /* dad (bit 0-1) is 0 */ > + /* set encryption bit; dad (bits 0-1) is 0 */ > + sata_cmd.retfis_ncqtag_atap_dir_m_dad = > + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | > + ((ATAP & 0x3f) << 10) | 0x20 | dir); > /* fill in PRD (scatter/gather) table, if any */ > if (task->num_scatter > 1) { > pm8001_chip_make_sg(task->scatter, > @@ -4568,11 +4567,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, > pm8001_dbg(pm8001_ha, IO, > "Sending Normal SATA command 0x%x inb %x\n", > sata_cmd.sata_fis.command, q_index); > - /* dad (bit 0-1) is 0 */ > - sata_cmd.ncqtag_atap_dir_m_dad = > - cpu_to_le32(((ncg_tag & 0xff)<<16) | > - ((ATAP & 0x3f) << 10) | dir); > - > + /* dad (bits 0-1) is 0 */ > + sata_cmd.retfis_ncqtag_atap_dir_m_dad = > + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | > + ((ATAP & 0x3f) << 10) | dir); > /* fill in PRD (scatter/gather) table, if any */ > if (task->num_scatter > 1) { > pm8001_chip_make_sg(task->scatter, > diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h > index acf6e3005b84..eb8fd37b2066 100644 > --- a/drivers/scsi/pm8001/pm80xx_hwi.h > +++ b/drivers/scsi/pm8001/pm80xx_hwi.h > @@ -731,7 +731,7 @@ struct sata_start_req { > __le32 tag; > __le32 device_id; > __le32 data_len; > - __le32 ncqtag_atap_dir_m_dad; > + __le32 retfis_ncqtag_atap_dir_m_dad; > struct host_to_dev_fis sata_fis; > u32 reserved1; > u32 reserved2; /* dword 11. rsvd for normal I/O. */ > -- > 2.42.0.rc1.204.g551eb34607-goog > Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 73cd25f30ca5..649724a1d134 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -4095,7 +4095,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, u32 hdr_tag, ncg_tag = 0; u64 phys_addr; u32 ATAP = 0x0; - u32 dir; + u32 dir, retfis = 0; u32 opc = OPC_INB_SATA_HOST_OPSTART; memset(&sata_cmd, 0, sizeof(sata_cmd)); @@ -4124,8 +4124,11 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); - sata_cmd.ncqtag_atap_dir_m = - cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir); + if (task->ata_task.return_fis_on_success) + retfis = 1; + sata_cmd.retfis_ncqtag_atap_dir_m = + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | + ((ATAP & 0x3f) << 10) | dir); sata_cmd.sata_fis = task->ata_task.fis; if (likely(!task->ata_task.device_control_reg_update)) sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 961d0465b923..fc2127dcb58d 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -515,7 +515,7 @@ struct sata_start_req { __le32 tag; __le32 device_id; __le32 data_len; - __le32 ncqtag_atap_dir_m; + __le32 retfis_ncqtag_atap_dir_m; struct host_to_dev_fis sata_fis; u32 reserved1; u32 reserved2; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 39a12ee94a72..a5021577a15f 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -4457,7 +4457,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, u64 phys_addr, end_addr; u32 end_addr_high, end_addr_low; u32 ATAP = 0x0; - u32 dir; + u32 dir, retfis = 0; u32 opc = OPC_INB_SATA_HOST_OPSTART; memset(&sata_cmd, 0, sizeof(sata_cmd)); @@ -4487,7 +4487,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.tag = cpu_to_le32(tag); sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); - + if (task->ata_task.return_fis_on_success) + retfis = 1; sata_cmd.sata_fis = task->ata_task.fis; if (likely(!task->ata_task.device_control_reg_update)) sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ @@ -4500,12 +4501,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n", sata_cmd.sata_fis.command); opc = OPC_INB_SATA_DIF_ENC_IO; - - /* set encryption bit */ - sata_cmd.ncqtag_atap_dir_m_dad = - cpu_to_le32(((ncg_tag & 0xff)<<16)| - ((ATAP & 0x3f) << 10) | 0x20 | dir); - /* dad (bit 0-1) is 0 */ + /* set encryption bit; dad (bits 0-1) is 0 */ + sata_cmd.retfis_ncqtag_atap_dir_m_dad = + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | + ((ATAP & 0x3f) << 10) | 0x20 | dir); /* fill in PRD (scatter/gather) table, if any */ if (task->num_scatter > 1) { pm8001_chip_make_sg(task->scatter, @@ -4568,11 +4567,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, pm8001_dbg(pm8001_ha, IO, "Sending Normal SATA command 0x%x inb %x\n", sata_cmd.sata_fis.command, q_index); - /* dad (bit 0-1) is 0 */ - sata_cmd.ncqtag_atap_dir_m_dad = - cpu_to_le32(((ncg_tag & 0xff)<<16) | - ((ATAP & 0x3f) << 10) | dir); - + /* dad (bits 0-1) is 0 */ + sata_cmd.retfis_ncqtag_atap_dir_m_dad = + cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) | + ((ATAP & 0x3f) << 10) | dir); /* fill in PRD (scatter/gather) table, if any */ if (task->num_scatter > 1) { pm8001_chip_make_sg(task->scatter, diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h index acf6e3005b84..eb8fd37b2066 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.h +++ b/drivers/scsi/pm8001/pm80xx_hwi.h @@ -731,7 +731,7 @@ struct sata_start_req { __le32 tag; __le32 device_id; __le32 data_len; - __le32 ncqtag_atap_dir_m_dad; + __le32 retfis_ncqtag_atap_dir_m_dad; struct host_to_dev_fis sata_fis; u32 reserved1; u32 reserved2; /* dword 11. rsvd for normal I/O. */
By default PM80xx HBAs return FIS only when a drive reports an error. The RETFIS bit forces the controller to populate FIS even when a drive reports no error. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> --- drivers/scsi/pm8001/pm8001_hwi.c | 9 ++++++--- drivers/scsi/pm8001/pm8001_hwi.h | 2 +- drivers/scsi/pm8001/pm80xx_hwi.c | 24 +++++++++++------------- drivers/scsi/pm8001/pm80xx_hwi.h | 2 +- 4 files changed, 19 insertions(+), 18 deletions(-)