| Message ID | 20230821223001.28480-17-laurent.pinchart@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | media: i2c: imx219: Miscellaneous cleanups and improvements | expand |
Hi Laurent On Mon, 21 Aug 2023 at 23:30, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Calculate the crop rectangle size and location dynamically when setting > the format, instead of storing it in the imx219_mode structure. This > removes duplicated information from the mode, to guarantee consistency. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/media/i2c/imx219.c | 45 +++++++++++++------------------------- > 1 file changed, 15 insertions(+), 30 deletions(-) > > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c > index 646d73d1e6a3..4140d9b78e4c 100644 > --- a/drivers/media/i2c/imx219.c > +++ b/drivers/media/i2c/imx219.c > @@ -18,6 +18,7 @@ > #include <linux/delay.h> > #include <linux/gpio/consumer.h> > #include <linux/i2c.h> > +#include <linux/minmax.h> > #include <linux/module.h> > #include <linux/pm_runtime.h> > #include <linux/regulator/consumer.h> > @@ -152,9 +153,6 @@ struct imx219_mode { > /* Frame height */ > unsigned int height; > > - /* Analog crop rectangle. */ > - struct v4l2_rect crop; > - > /* V-timing */ > unsigned int vts_def; > }; > @@ -292,48 +290,24 @@ static const struct imx219_mode supported_modes[] = { > /* 8MPix 15fps mode */ > .width = 3280, > .height = 2464, > - .crop = { > - .left = IMX219_PIXEL_ARRAY_LEFT, > - .top = IMX219_PIXEL_ARRAY_TOP, > - .width = 3280, > - .height = 2464 > - }, > .vts_def = 3526, > }, > { > /* 1080P 30fps cropped */ > .width = 1920, > .height = 1080, > - .crop = { > - .left = 688, > - .top = 700, > - .width = 1920, > - .height = 1080 > - }, > .vts_def = 1763, > }, > { > /* 2x2 binned 30fps mode */ > .width = 1640, > .height = 1232, > - .crop = { > - .left = IMX219_PIXEL_ARRAY_LEFT, > - .top = IMX219_PIXEL_ARRAY_TOP, > - .width = 3280, > - .height = 2464 > - }, > .vts_def = 1763, > }, > { > /* 640x480 30fps mode */ > .width = 640, > .height = 480, > - .crop = { > - .left = 1008, > - .top = 760, > - .width = 1280, > - .height = 960 > - }, > .vts_def = 1763, > }, > }; > @@ -830,6 +804,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > int exposure_max, exposure_def, hblank; > struct v4l2_mbus_framefmt *format; > struct v4l2_rect *crop; > + unsigned int bin; > > mode = v4l2_find_nearest_size(supported_modes, > ARRAY_SIZE(supported_modes), > @@ -839,10 +814,20 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code); > > format = v4l2_subdev_get_pad_format(sd, sd_state, 0); > - crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > - > *format = fmt->format; > - *crop = mode->crop; > + > + /* > + * Use binning to maximize the crop rectangle size, and centre it in the > + * sensor. Bin by the same factor horizontally and vertically. > + */ > + bin = min3(IMX219_PIXEL_ARRAY_WIDTH / format->width, > + IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U); If you're insisting that binning is by the same factor horizontally and vertically, why consider both in the min? Either only look at one, or we start looking at making H & V binning independent. Dave > + > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > + crop->width = format->width * bin; > + crop->height = format->height * bin; > + crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2; > + crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2; > > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > /* Update limits and set FPS to default */ > -- > Regards, > > Laurent Pinchart >
Hi Dave, On Tue, Aug 22, 2023 at 07:15:21PM +0100, Dave Stevenson wrote: > On Mon, 21 Aug 2023 at 23:30, Laurent Pinchart wrote: > > > > Calculate the crop rectangle size and location dynamically when setting > > the format, instead of storing it in the imx219_mode structure. This > > removes duplicated information from the mode, to guarantee consistency. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > --- > > drivers/media/i2c/imx219.c | 45 +++++++++++++------------------------- > > 1 file changed, 15 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c > > index 646d73d1e6a3..4140d9b78e4c 100644 > > --- a/drivers/media/i2c/imx219.c > > +++ b/drivers/media/i2c/imx219.c > > @@ -18,6 +18,7 @@ > > #include <linux/delay.h> > > #include <linux/gpio/consumer.h> > > #include <linux/i2c.h> > > +#include <linux/minmax.h> > > #include <linux/module.h> > > #include <linux/pm_runtime.h> > > #include <linux/regulator/consumer.h> > > @@ -152,9 +153,6 @@ struct imx219_mode { > > /* Frame height */ > > unsigned int height; > > > > - /* Analog crop rectangle. */ > > - struct v4l2_rect crop; > > - > > /* V-timing */ > > unsigned int vts_def; > > }; > > @@ -292,48 +290,24 @@ static const struct imx219_mode supported_modes[] = { > > /* 8MPix 15fps mode */ > > .width = 3280, > > .height = 2464, > > - .crop = { > > - .left = IMX219_PIXEL_ARRAY_LEFT, > > - .top = IMX219_PIXEL_ARRAY_TOP, > > - .width = 3280, > > - .height = 2464 > > - }, > > .vts_def = 3526, > > }, > > { > > /* 1080P 30fps cropped */ > > .width = 1920, > > .height = 1080, > > - .crop = { > > - .left = 688, > > - .top = 700, > > - .width = 1920, > > - .height = 1080 > > - }, > > .vts_def = 1763, > > }, > > { > > /* 2x2 binned 30fps mode */ > > .width = 1640, > > .height = 1232, > > - .crop = { > > - .left = IMX219_PIXEL_ARRAY_LEFT, > > - .top = IMX219_PIXEL_ARRAY_TOP, > > - .width = 3280, > > - .height = 2464 > > - }, > > .vts_def = 1763, > > }, > > { > > /* 640x480 30fps mode */ > > .width = 640, > > .height = 480, > > - .crop = { > > - .left = 1008, > > - .top = 760, > > - .width = 1280, > > - .height = 960 > > - }, > > .vts_def = 1763, > > }, > > }; > > @@ -830,6 +804,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > int exposure_max, exposure_def, hblank; > > struct v4l2_mbus_framefmt *format; > > struct v4l2_rect *crop; > > + unsigned int bin; > > > > mode = v4l2_find_nearest_size(supported_modes, > > ARRAY_SIZE(supported_modes), > > @@ -839,10 +814,20 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code); > > > > format = v4l2_subdev_get_pad_format(sd, sd_state, 0); > > - crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > > - > > *format = fmt->format; > > - *crop = mode->crop; > > + > > + /* > > + * Use binning to maximize the crop rectangle size, and centre it in the > > + * sensor. Bin by the same factor horizontally and vertically. > > + */ > > + bin = min3(IMX219_PIXEL_ARRAY_WIDTH / format->width, > > + IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U); > > If you're insisting that binning is by the same factor horizontally > and vertically, why consider both in the min? Either only look at one, > or we start looking at making H & V binning independent. I was considering making them independent. It should be fairly easy. If you're fine with that, I think that would be my preference. > > + > > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > > + crop->width = format->width * bin; > > + crop->height = format->height * bin; > > + crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2; > > + crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2; > > > > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > /* Update limits and set FPS to default */
On Wed, 23 Aug 2023 at 10:07, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Dave, > > On Tue, Aug 22, 2023 at 07:15:21PM +0100, Dave Stevenson wrote: > > On Mon, 21 Aug 2023 at 23:30, Laurent Pinchart wrote: > > > > > > Calculate the crop rectangle size and location dynamically when setting > > > the format, instead of storing it in the imx219_mode structure. This > > > removes duplicated information from the mode, to guarantee consistency. > > > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > --- > > > drivers/media/i2c/imx219.c | 45 +++++++++++++------------------------- > > > 1 file changed, 15 insertions(+), 30 deletions(-) > > > > > > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c > > > index 646d73d1e6a3..4140d9b78e4c 100644 > > > --- a/drivers/media/i2c/imx219.c > > > +++ b/drivers/media/i2c/imx219.c > > > @@ -18,6 +18,7 @@ > > > #include <linux/delay.h> > > > #include <linux/gpio/consumer.h> > > > #include <linux/i2c.h> > > > +#include <linux/minmax.h> > > > #include <linux/module.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/regulator/consumer.h> > > > @@ -152,9 +153,6 @@ struct imx219_mode { > > > /* Frame height */ > > > unsigned int height; > > > > > > - /* Analog crop rectangle. */ > > > - struct v4l2_rect crop; > > > - > > > /* V-timing */ > > > unsigned int vts_def; > > > }; > > > @@ -292,48 +290,24 @@ static const struct imx219_mode supported_modes[] = { > > > /* 8MPix 15fps mode */ > > > .width = 3280, > > > .height = 2464, > > > - .crop = { > > > - .left = IMX219_PIXEL_ARRAY_LEFT, > > > - .top = IMX219_PIXEL_ARRAY_TOP, > > > - .width = 3280, > > > - .height = 2464 > > > - }, > > > .vts_def = 3526, > > > }, > > > { > > > /* 1080P 30fps cropped */ > > > .width = 1920, > > > .height = 1080, > > > - .crop = { > > > - .left = 688, > > > - .top = 700, > > > - .width = 1920, > > > - .height = 1080 > > > - }, > > > .vts_def = 1763, > > > }, > > > { > > > /* 2x2 binned 30fps mode */ > > > .width = 1640, > > > .height = 1232, > > > - .crop = { > > > - .left = IMX219_PIXEL_ARRAY_LEFT, > > > - .top = IMX219_PIXEL_ARRAY_TOP, > > > - .width = 3280, > > > - .height = 2464 > > > - }, > > > .vts_def = 1763, > > > }, > > > { > > > /* 640x480 30fps mode */ > > > .width = 640, > > > .height = 480, > > > - .crop = { > > > - .left = 1008, > > > - .top = 760, > > > - .width = 1280, > > > - .height = 960 > > > - }, > > > .vts_def = 1763, > > > }, > > > }; > > > @@ -830,6 +804,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > > int exposure_max, exposure_def, hblank; > > > struct v4l2_mbus_framefmt *format; > > > struct v4l2_rect *crop; > > > + unsigned int bin; > > > > > > mode = v4l2_find_nearest_size(supported_modes, > > > ARRAY_SIZE(supported_modes), > > > @@ -839,10 +814,20 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > > imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code); > > > > > > format = v4l2_subdev_get_pad_format(sd, sd_state, 0); > > > - crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > > > - > > > *format = fmt->format; > > > - *crop = mode->crop; > > > + > > > + /* > > > + * Use binning to maximize the crop rectangle size, and centre it in the > > > + * sensor. Bin by the same factor horizontally and vertically. > > > + */ > > > + bin = min3(IMX219_PIXEL_ARRAY_WIDTH / format->width, > > > + IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U); > > > > If you're insisting that binning is by the same factor horizontally > > and vertically, why consider both in the min? Either only look at one, > > or we start looking at making H & V binning independent. > > I was considering making them independent. It should be fairly easy. If > you're fine with that, I think that would be my preference. I haven't tried this sensor with different binning settings between H & V, but have no issue with it being investigated. It was the combination of stating that they must be the same but then considering both that seemed odd. Dave > > > + > > > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); > > > + crop->width = format->width * bin; > > > + crop->height = format->height * bin; > > > + crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2; > > > + crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2; > > > > > > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > > /* Update limits and set FPS to default */ > > -- > Regards, > > Laurent Pinchart
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c index 646d73d1e6a3..4140d9b78e4c 100644 --- a/drivers/media/i2c/imx219.c +++ b/drivers/media/i2c/imx219.c @@ -18,6 +18,7 @@ #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> +#include <linux/minmax.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> @@ -152,9 +153,6 @@ struct imx219_mode { /* Frame height */ unsigned int height; - /* Analog crop rectangle. */ - struct v4l2_rect crop; - /* V-timing */ unsigned int vts_def; }; @@ -292,48 +290,24 @@ static const struct imx219_mode supported_modes[] = { /* 8MPix 15fps mode */ .width = 3280, .height = 2464, - .crop = { - .left = IMX219_PIXEL_ARRAY_LEFT, - .top = IMX219_PIXEL_ARRAY_TOP, - .width = 3280, - .height = 2464 - }, .vts_def = 3526, }, { /* 1080P 30fps cropped */ .width = 1920, .height = 1080, - .crop = { - .left = 688, - .top = 700, - .width = 1920, - .height = 1080 - }, .vts_def = 1763, }, { /* 2x2 binned 30fps mode */ .width = 1640, .height = 1232, - .crop = { - .left = IMX219_PIXEL_ARRAY_LEFT, - .top = IMX219_PIXEL_ARRAY_TOP, - .width = 3280, - .height = 2464 - }, .vts_def = 1763, }, { /* 640x480 30fps mode */ .width = 640, .height = 480, - .crop = { - .left = 1008, - .top = 760, - .width = 1280, - .height = 960 - }, .vts_def = 1763, }, }; @@ -830,6 +804,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, int exposure_max, exposure_def, hblank; struct v4l2_mbus_framefmt *format; struct v4l2_rect *crop; + unsigned int bin; mode = v4l2_find_nearest_size(supported_modes, ARRAY_SIZE(supported_modes), @@ -839,10 +814,20 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code); format = v4l2_subdev_get_pad_format(sd, sd_state, 0); - crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); - *format = fmt->format; - *crop = mode->crop; + + /* + * Use binning to maximize the crop rectangle size, and centre it in the + * sensor. Bin by the same factor horizontally and vertically. + */ + bin = min3(IMX219_PIXEL_ARRAY_WIDTH / format->width, + IMX219_PIXEL_ARRAY_HEIGHT / format->height, 2U); + + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 0); + crop->width = format->width * bin; + crop->height = format->height * bin; + crop->left = (IMX219_NATIVE_WIDTH - crop->width) / 2; + crop->top = (IMX219_NATIVE_HEIGHT - crop->height) / 2; if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { /* Update limits and set FPS to default */
Calculate the crop rectangle size and location dynamically when setting the format, instead of storing it in the imx219_mode structure. This removes duplicated information from the mode, to guarantee consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/i2c/imx219.c | 45 +++++++++++++------------------------- 1 file changed, 15 insertions(+), 30 deletions(-)