diff mbox series

[v3,16/32] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files

Message ID 20230822001349.899298-17-dmitry.baryshkov@linaro.org (mailing list archive)
State Superseded
Headers show
Series ARM: dts: qcom: cleanup PMIC usage | expand

Commit Message

Dmitry Baryshkov Aug. 22, 2023, 12:13 a.m. UTC
The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/pm8018.dtsi            | 57 +++++++++++++++++++
 .../boot/dts/qcom/qcom-mdm9615-wp8548.dtsi    |  1 +
 arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi      | 47 +--------------
 3 files changed, 60 insertions(+), 45 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom/pm8018.dtsi

Comments

Konrad Dybcio Aug. 26, 2023, 12:08 p.m. UTC | #1
On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> include it from the board files.
> 
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
[...]

> +			pmic {
Are you leaving an empty subnode here?

Konrad
Dmitry Baryshkov Aug. 26, 2023, 1:43 p.m. UTC | #2
On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> > The PMIC is not a part of the SoC, so move PMIC to a separate file and
> > include it from the board files.
> >
> > Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> [...]
>
> > +                     pmic {
> Are you leaving an empty subnode here?

No. It contains 'interrupts' property (which is specific to the SoC).
Konrad Dybcio Aug. 26, 2023, 1:48 p.m. UTC | #3
On 26.08.2023 15:43, Dmitry Baryshkov wrote:
> On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>>
>> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
>>> The PMIC is not a part of the SoC, so move PMIC to a separate file and
>>> include it from the board files.
>>>
>>> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>> [...]
>>
>>> +                     pmic {
>> Are you leaving an empty subnode here?
> 
> No. It contains 'interrupts' property (which is specific to the SoC).
Meh, that's bad design.. should have been in the controller node!

But noboyd thought about this 10y+ ago so here we are

Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Dmitry Baryshkov Aug. 26, 2023, 2:03 p.m. UTC | #4
On Sat, 26 Aug 2023 at 16:48, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 26.08.2023 15:43, Dmitry Baryshkov wrote:
> > On Sat, 26 Aug 2023 at 15:08, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> >>
> >> On 22.08.2023 02:13, Dmitry Baryshkov wrote:
> >>> The PMIC is not a part of the SoC, so move PMIC to a separate file and
> >>> include it from the board files.
> >>>
> >>> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> >>> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> >>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >>> ---
> >> [...]
> >>
> >>> +                     pmic {
> >> Are you leaving an empty subnode here?
> >
> > No. It contains 'interrupts' property (which is specific to the SoC).
> Meh, that's bad design.. should have been in the controller node!

It will not be logical either. The interrupt line comes from the PMIC.

Wait. Maybe we should do it other way around: move IRQ to the _board_
file, since it is just a GPIO line. Then we don't have to leave this
band-aid in place.

> But noboyd thought about this 10y+ ago so here we are
>
> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>
> Konrad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi
new file mode 100644
index 000000000000..c602544900b2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8018.dtsi
@@ -0,0 +1,57 @@ 
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Device Tree Source for Qualcomm PM8018
+ *
+ * Copyright (C) 2016 BayLibre, SAS.
+ * Author : Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+&ssbi {
+	pm8018: pmic {
+		compatible = "qcom,pm8018", "qcom,pm8921";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrkey@1c {
+			compatible = "qcom,pm8018-pwrkey",
+				     "qcom,pm8921-pwrkey";
+			reg = <0x1c>;
+			interrupt-parent = <&pm8018>;
+			interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+				     <51 IRQ_TYPE_EDGE_RISING>;
+			debounce = <15625>;
+			pull-up;
+		};
+
+		pm8018_mpps: mpps@50 {
+			compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x50>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8018_mpps 0 0 6>;
+		};
+
+		rtc@11d {
+			compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
+			interrupt-parent = <&pm8018>;
+			interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x11d>;
+			allow-set-time;
+		};
+
+		pm8018_gpio: gpio@150 {
+			compatible = "qcom,pm8058-gpio",
+				     "qcom,ssbi-gpio";
+			reg = <0x150>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pm8018_gpio 0 0 6>;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
index dac3aa793f71..cc264861afe5 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi
@@ -7,6 +7,7 @@ 
  */
 
 #include "qcom-mdm9615.dtsi"
+#include "pm8018.dtsi"
 
 / {
 	model = "Sierra Wireless WP8548 Module";
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index c4cfbdbcdf14..11e5ab2708d7 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -258,56 +258,13 @@  gsbi5_serial: serial@16440000 {
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi: qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8018: pmic {
-				compatible = "qcom,pm8018", "qcom,pm8921";
+			pmic {
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pwrkey@1c {
-					compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey";
-					reg = <0x1c>;
-					interrupt-parent = <&pm8018>;
-					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
-						     <51 IRQ_TYPE_EDGE_RISING>;
-					debounce = <15625>;
-					pull-up;
-				};
-
-				pm8018_mpps: mpps@50 {
-					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					reg = <0x50>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&pm8018_mpps 0 0 6>;
-				};
-
-				rtc@11d {
-					compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc";
-					interrupt-parent = <&pm8018>;
-					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
-					reg = <0x11d>;
-					allow-set-time;
-				};
-
-				pm8018_gpio: gpio@150 {
-					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
-					reg = <0x150>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					gpio-ranges = <&pm8018_gpio 0 0 6>;
-					#gpio-cells = <2>;
-				};
 			};
 		};