diff mbox series

[v5] usb: typec: qcom: Update the logic of regulator enable and disable

Message ID 20230831-qcom-tcpc-v5-1-5e2661dc6c1d@quicinc.com (mailing list archive)
State Accepted
Commit 76750f1dcad3e1af2295cdf2f9434e06e3178ef3
Headers show
Series [v5] usb: typec: qcom: Update the logic of regulator enable and disable | expand

Commit Message

Hui Liu via B4 Relay Aug. 31, 2023, 10:19 a.m. UTC
From: Hui Liu <quic_huliu@quicinc.com>

Removed the call logic of disable and enable regulator
in reset function. Enable the regulator in qcom_pmic_typec_start
function and disable it in qcom_pmic_typec_stop function to
avoid unbalanced regulator disable warnings.

Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb5
Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
---
Changes in v5:
- Removed Reviewed-by: Guenter Roeck <linux@roeck-us.net>
- Updated V4 history
- Link to v4: https://lore.kernel.org/r/20230830-qcom-tcpc-v4-1-c19b0984879b@quicinc.com

Changes in v4:
- Rephrased commit text
- Link to v3: https://lore.kernel.org/r/20230828-qcom-tcpc-v3-1-e95b7afa34d9@quicinc.com

Changes in v3:
- Take Bryan's proposal to remove enable/disable operation in pdphy
enable and pdphy disable function, then enable regulator in pdphy start
function and disable it in pdphy stop function.
- Link to v2: https://lore.kernel.org/r/20230824-qcom-tcpc-v2-1-3dd8c3424564@quicinc.com

Changes in v2:
- Add Fixes tag
- Link to v1: https://lore.kernel.org/r/20230823-qcom-tcpc-v1-1-fa81a09ca056@quicinc.com
---
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)


---
base-commit: bbb9e06d2c6435af9c62074ad7048910eeb2e7bc
change-id: 20230822-qcom-tcpc-d41954ac65fa

Best regards,

Comments

Heikki Krogerus Sept. 4, 2023, 7:04 a.m. UTC | #1
On Thu, Aug 31, 2023 at 06:19:45PM +0800, Hui Liu via B4 Relay wrote:
> From: Hui Liu <quic_huliu@quicinc.com>
> 
> Removed the call logic of disable and enable regulator
> in reset function. Enable the regulator in qcom_pmic_typec_start
> function and disable it in qcom_pmic_typec_stop function to
> avoid unbalanced regulator disable warnings.
> 
> Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # rb5
> Signed-off-by: Hui Liu <quic_huliu@quicinc.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> Changes in v5:
> - Removed Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> - Updated V4 history
> - Link to v4: https://lore.kernel.org/r/20230830-qcom-tcpc-v4-1-c19b0984879b@quicinc.com
> 
> Changes in v4:
> - Rephrased commit text
> - Link to v3: https://lore.kernel.org/r/20230828-qcom-tcpc-v3-1-e95b7afa34d9@quicinc.com
> 
> Changes in v3:
> - Take Bryan's proposal to remove enable/disable operation in pdphy
> enable and pdphy disable function, then enable regulator in pdphy start
> function and disable it in pdphy stop function.
> - Link to v2: https://lore.kernel.org/r/20230824-qcom-tcpc-v2-1-3dd8c3424564@quicinc.com
> 
> Changes in v2:
> - Add Fixes tag
> - Link to v1: https://lore.kernel.org/r/20230823-qcom-tcpc-v1-1-fa81a09ca056@quicinc.com
> ---
>  drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> index bb0b8479d80f..52c81378e36e 100644
> --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> @@ -381,10 +381,6 @@ static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph
>  	struct device *dev = pmic_typec_pdphy->dev;
>  	int ret;
>  
> -	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
> -	if (ret)
> -		return ret;
> -
>  	/* PD 2.0, DR=TYPEC_DEVICE, PR=TYPEC_SINK */
>  	ret = regmap_update_bits(pmic_typec_pdphy->regmap,
>  				 pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
> @@ -422,8 +418,6 @@ static int qcom_pmic_typec_pdphy_disable(struct pmic_typec_pdphy *pmic_typec_pdp
>  	ret = regmap_write(pmic_typec_pdphy->regmap,
>  			   pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0);
>  
> -	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
> -
>  	return ret;
>  }
>  
> @@ -447,6 +441,10 @@ int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
>  	int i;
>  	int ret;
>  
> +	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
> +	if (ret)
> +		return ret;
> +
>  	pmic_typec_pdphy->tcpm_port = tcpm_port;
>  
>  	ret = pmic_typec_pdphy_reset(pmic_typec_pdphy);
> @@ -467,6 +465,8 @@ void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
>  		disable_irq(pmic_typec_pdphy->irq_data[i].irq);
>  
>  	qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy);
> +
> +	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
>  }
>  
>  struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev)
> 
> ---
> base-commit: bbb9e06d2c6435af9c62074ad7048910eeb2e7bc
> change-id: 20230822-qcom-tcpc-d41954ac65fa
> 
> Best regards,
> -- 
> Hui Liu <quic_huliu@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
index bb0b8479d80f..52c81378e36e 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
@@ -381,10 +381,6 @@  static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph
 	struct device *dev = pmic_typec_pdphy->dev;
 	int ret;
 
-	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
-	if (ret)
-		return ret;
-
 	/* PD 2.0, DR=TYPEC_DEVICE, PR=TYPEC_SINK */
 	ret = regmap_update_bits(pmic_typec_pdphy->regmap,
 				 pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
@@ -422,8 +418,6 @@  static int qcom_pmic_typec_pdphy_disable(struct pmic_typec_pdphy *pmic_typec_pdp
 	ret = regmap_write(pmic_typec_pdphy->regmap,
 			   pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0);
 
-	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
-
 	return ret;
 }
 
@@ -447,6 +441,10 @@  int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
 	int i;
 	int ret;
 
+	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
+	if (ret)
+		return ret;
+
 	pmic_typec_pdphy->tcpm_port = tcpm_port;
 
 	ret = pmic_typec_pdphy_reset(pmic_typec_pdphy);
@@ -467,6 +465,8 @@  void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
 		disable_irq(pmic_typec_pdphy->irq_data[i].irq);
 
 	qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy);
+
+	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
 }
 
 struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev)