| Message ID | 20230905141245.26470-1-Tze-nan.Wu@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ring-buffer: Do not read at &event->array[0] if it across the page | expand |
On Tue, 5 Sep 2023 22:12:45 +0800 Tze-nan Wu <Tze-nan.Wu@mediatek.com> wrote: > While reading from the tracing/trace, the ftrace reader rarely encounters > a KASAN invalid access issue. > It is likely that the writer has disrupted the ring_buffer that the reader > is currently parsing. the kasan report is as below: What kernel are you using? There's been recent fixes that handle the race between reading the last entry and the writer adding to it. This looks like you may have hit that bug. > > [name:report&]BUG: KASAN: invalid-access in rb_iter_head_event+0x27c/0x3d0 > [name:report&]Read of size 4 at addr 71ffff8111a18000 by task xxxx > [name:report_sw_tags&]Pointer tag: [71], memory tag: [0f] > [name:report&] > CPU: 2 PID: 380 Comm: xxxx > Call trace: > dump_backtrace+0x168/0x1b0 > show_stack+0x2c/0x3c > dump_stack_lvl+0xa4/0xd4 > print_report+0x268/0x9b0 > kasan_report+0xdc/0x148 > kasan_tag_mismatch+0x28/0x3c > __hwasan_tag_mismatch+0x2c/0x58 > rb_event_length() [inline] > rb_iter_head_event+0x27c/0x3d0 > ring_buffer_iter_peek+0x23c/0x6e0 > __find_next_entry+0x1ac/0x3d8 > s_next+0x1f0/0x310 > seq_read_iter+0x4e8/0x77c > seq_read+0xf8/0x150 > vfs_read+0x1a8/0x4cc > > In some edge cases, ftrace reader could access to an invalid address, > specifically when reading 4 bytes beyond the end of the currently page. > While issue happened, the dump of rb_iter_head_event is shown as below: > > in function rb_iter_head_event: > - iter->head = 0xFEC > - iter->next_event = 0xFEC > - commit = 0xFF0 > - read_stamp = 0x2955AC46DB0 > - page_stamp = 0x2955AC2439A > - iter->head_page->page = 0x71FFFF8111A17000 > - iter->head_page->time_stamp = 0x2956A142267 > - iter->head_page->page->commit = 0xFF0 > - the content in iter->head_page->page > 0x71FFFF8111A17FF0: 01010075 00002421 0A123B7C FFFFFFC0 > > In rb_iter_head_event, reader will call rb_event_length with argument > (struct ring_buffer_event *event = 0x71FFFF8111A17FFC). As the commit is considered the end of buffer, it should never read past that, which the above appears to be doing. That's why I think it hit that race. > Since the content data start at address 0x71FFFF8111A17FFC are 0xFFFFFFC0. > event->type will be interpret as 0x0, than the reader will try to get the > length by accessing event->array[0], which is an invalid address: > &event->array[0] = 0x71FFFF8111A18000 > > Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> > --- > Following patch may not become a solution, it merely checks if the address > to be accessed is valid or not within the rb_event_length before access. > And not sure if there is any side-effect it can lead to. > > I am curious about what a better solution for this issue would look like. > Should we address the problem from the writer or the reader? > > Also I wonder if the cause of the issue is exactly as I suspected. > Any Suggestion will be appreciated. I guess this depends on if you have the fixes or not? > > Test below can reproduce the issue in 2 hours on kernel-6.1.24: > $cd /sys/kernel/tracing/ > # make the reader and writer race more through resize the buffer to 8kb > $echo 8 > buffer_size_kn > # enable all events > $echo 1 > event/enable > # enable trace > $echo 1 > tracing_on > > # write and run a script that keep reading trace > $./read_trace.sh > > ``` read_trace.sh > while : > do > cat /sys/kernel/tracing/trace > /dev/null > done > > ``` Thanks, I'll look at that when I finish debugging the eventfs bug. -- Steve
On Thu, 7 Sep 2023 10:10:57 +0000 Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com> wrote: > > Same as my thought, > > since every time the reader try to access the address in next page, > > the below condition hold in rb_iter_head_event function: > > > > if (iter->page_stamp != iter_head_page->page->time_stamp || > > commit > rb_page_commit(iter_head_page)) > > goto reset; > > > > I observe the result by the debug patch provided below: > > > > @@ -2378,6 +2378,19 @@ rb_iter_head_event(struct > > ring_buffer_iter *iter) > > commit = rb_page_commit(iter_head_page); > > smp_rmb(); > > + if ((iter->head >= 0xFECUL) && commit == 0xFF0UL) { > > + pr_info("rbdbg: cpu = %d, event = 0x%lx, > > iter- > > > head = 0x%lx,\ > > > > + commit = 0xFF0, type = 0x%x, ts = > > 0x%x, > > array addr = 0x%lx\n",\ > > + iter->cpu_buffer->cpu, (unsigned > > long)event, iter->head,\ > > + event->type_len, event->time_delta, > > (unsigned long)(&(event->array[0]))); > > + mdelay(500); > > + pr_info("rbdbg2: cpu = %d, event = 0x%lx, > > iter- > > > head = 0x%lx,\ > > > > + commit = 0xFF0, type = 0x%x, ts = > > 0x%x, > > array addr = 0x%lx\n",\ > > + iter->cpu_buffer->cpu, (unsigned > > long)event, iter->head,\ > > + event->type_len, event->time_delta, > > (unsigned long)(&(event->array[0]))); > > + if (iter->page_stamp != iter_head_page->page- > > > time_stamp || commit > rb_page_commit(iter_head_page)) > > > > + pr_info("rbdbg: writer corrupt > > reader\n"); > > + } > > event = __rb_page_index(iter_head_page, iter->head); > > length = rb_event_length(event); > > > > Note that the mdelay(500) in the debug patch can reproduce the issue > > easier with same test in my environmnet, > > I am now able to reproduce the issue within 15 minutes if the debug > > patch on. > > > > The debug patch may give something similar to the below log just before > the invalid access happened, for me it looks like the padding event had > just corrupted by the writer before the reader invoke rb_event_length > function on it. > > [ 338.156772] cat: [name:ring_buffer&]rbdbg: cpu = 0, event = > 0x????????????dffc, iter->head = 0xfec, commit = 0xFF0, type = 0x1d, ts > = 0x0, array addr = 0x????????????e000 > [ 338.656796] cat: [name:ring_buffer&]rbdbg2: cpu = 0, event = > 0x????????????dffc, iter->head = 0xfec, commit = 0xFF0, type = 0x0, ts > = 0x0, array addr = 0x????????????e000 > [ 338.656803] cat: [name:ring_buffer&]rbdbg: writer corrupt reader > [ 338.656810] cat: > [name:report&]========================================================= > ========= > [ 338.656819] cat: [name:report&]BUG: KASAN: invalid-access in > rb_event_length > > > > > > Since the content data start at address 0x71FFFF8111A17FFC are > > > > > > 0xFFFFFFC0. > > > > event->type will be interpret as 0x0, than the reader will try to > > > > > > get the > > > > length by accessing event->array[0], which is an invalid address: > > > > &event->array[0] = 0x71FFFF8111A18000 > > > > > > > > Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> > > > > --- > > > > Following patch may not become a solution, it merely checks if > > > > the > > > > > > address > > > > to be accessed is valid or not within the rb_event_length before > > > > > > access. > > > > And not sure if there is any side-effect it can lead to. > > > > > > > > I am curious about what a better solution for this issue would > > > > look > > > > > > like. > > > > Should we address the problem from the writer or the reader? > > > > > > > > Also I wonder if the cause of the issue is exactly as I > > > > suspected. > > > > Any Suggestion will be appreciated. > > > > > > I guess this depends on if you have the fixes or not? > > > > > > > yes, I could try to pick the patches that only included in mainline > > but > > not in kernel-6.1.52 for ring_buffer.c file, > > and do the same test to see if the issue is still reproducible. > > > > > > > > > > Test below can reproduce the issue in 2 hours on kernel-6.1.24: > > > > $cd /sys/kernel/tracing/ > > > > # make the reader and writer race more through resize the > > > > > > buffer to 8kb > > > > $echo 8 > buffer_size_kn > > > > # enable all events > > > > $echo 1 > event/enable > > > > # enable trace > > > > $echo 1 > tracing_on > > > > > > > > # write and run a script that keep reading trace > > > > $./read_trace.sh > > > > > > > > ``` read_trace.sh > > > > while : > > > > do > > > > cat /sys/kernel/tracing/trace > /dev/null > > > > done > > > > > > > > ``` > > > > > > Thanks, I'll look at that when I finish debugging the eventfs bug. > > > > > > -- Steve > > > > Also thank for your reply, > > > > And the temporary fix patch in my first mail should have some modified > as shown below. > + if (((unsigned long)event & 0xfffUL) >= PAGE_SIZE - 4) > ^^^^^^ > PAGE_SIZE-1 > + return -1; Your email is getting really hard to read due to the line wrap formatting. Anyway, can you try this patch? -- Steve diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 72ccf75defd0..5b0653378089 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2390,6 +2390,10 @@ rb_iter_head_event(struct ring_buffer_iter *iter) */ commit = rb_page_commit(iter_head_page); smp_rmb(); + /* An event needs to be at least 8 bytes in size */ + if (iter->head > commit - 8) + goto reset; + event = __rb_page_index(iter_head_page, iter->head); length = rb_event_length(event);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 78502d4c7214..ed5ddc3a134b 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -200,6 +200,8 @@ rb_event_length(struct ring_buffer_event *event) if (rb_null_event(event)) /* undefined */ return -1; + if (((unsigned long)event & 0xfffUL) >= PAGE_SIZE - 4) + return -1; return event->array[0] + RB_EVNT_HDR_SIZE; case RINGBUF_TYPE_TIME_EXTEND: @@ -209,6 +211,8 @@ rb_event_length(struct ring_buffer_event *event) return RB_LEN_TIME_STAMP; case RINGBUF_TYPE_DATA: + if ((((unsigned long)event & 0xfffUL) >= PAGE_SIZE - 4) && !event->type_len) + return -1; return rb_event_data_length(event); default: WARN_ON_ONCE(1);
While reading from the tracing/trace, the ftrace reader rarely encounters a KASAN invalid access issue. It is likely that the writer has disrupted the ring_buffer that the reader is currently parsing. the kasan report is as below: [name:report&]BUG: KASAN: invalid-access in rb_iter_head_event+0x27c/0x3d0 [name:report&]Read of size 4 at addr 71ffff8111a18000 by task xxxx [name:report_sw_tags&]Pointer tag: [71], memory tag: [0f] [name:report&] CPU: 2 PID: 380 Comm: xxxx Call trace: dump_backtrace+0x168/0x1b0 show_stack+0x2c/0x3c dump_stack_lvl+0xa4/0xd4 print_report+0x268/0x9b0 kasan_report+0xdc/0x148 kasan_tag_mismatch+0x28/0x3c __hwasan_tag_mismatch+0x2c/0x58 rb_event_length() [inline] rb_iter_head_event+0x27c/0x3d0 ring_buffer_iter_peek+0x23c/0x6e0 __find_next_entry+0x1ac/0x3d8 s_next+0x1f0/0x310 seq_read_iter+0x4e8/0x77c seq_read+0xf8/0x150 vfs_read+0x1a8/0x4cc In some edge cases, ftrace reader could access to an invalid address, specifically when reading 4 bytes beyond the end of the currently page. While issue happened, the dump of rb_iter_head_event is shown as below: in function rb_iter_head_event: - iter->head = 0xFEC - iter->next_event = 0xFEC - commit = 0xFF0 - read_stamp = 0x2955AC46DB0 - page_stamp = 0x2955AC2439A - iter->head_page->page = 0x71FFFF8111A17000 - iter->head_page->time_stamp = 0x2956A142267 - iter->head_page->page->commit = 0xFF0 - the content in iter->head_page->page 0x71FFFF8111A17FF0: 01010075 00002421 0A123B7C FFFFFFC0 In rb_iter_head_event, reader will call rb_event_length with argument (struct ring_buffer_event *event = 0x71FFFF8111A17FFC). Since the content data start at address 0x71FFFF8111A17FFC are 0xFFFFFFC0. event->type will be interpret as 0x0, than the reader will try to get the length by accessing event->array[0], which is an invalid address: &event->array[0] = 0x71FFFF8111A18000 Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> --- Following patch may not become a solution, it merely checks if the address to be accessed is valid or not within the rb_event_length before access. And not sure if there is any side-effect it can lead to. I am curious about what a better solution for this issue would look like. Should we address the problem from the writer or the reader? Also I wonder if the cause of the issue is exactly as I suspected. Any Suggestion will be appreciated. Test below can reproduce the issue in 2 hours on kernel-6.1.24: $cd /sys/kernel/tracing/ # make the reader and writer race more through resize the buffer to 8kb $echo 8 > buffer_size_kn # enable all events $echo 1 > event/enable # enable trace $echo 1 > tracing_on # write and run a script that keep reading trace $./read_trace.sh ``` read_trace.sh while : do cat /sys/kernel/tracing/trace > /dev/null done ``` --- kernel/trace/ring_buffer.c | 4 ++++ 1 file changed, 4 insertions(+)