| Message ID | 1694290578-17733-10-git-send-email-quic_mojha@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Qualcomm Minidump kernel driver related support | expand |
On Sun, Sep 10, 2023 at 01:46:10AM +0530, Mukesh Ojha wrote: > As dynamic ramoops command line parsing is now added, so > lets add the support in ramoops driver to get the resource > structure and add it during platform device registration. > > Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> > --- > fs/pstore/ram.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > Documentation/admin-guide/ramoops.rst might need an update as well. > diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c > index 2f625e1fa8d8..e73fbbc1b5b5 100644 > --- a/fs/pstore/ram.c > +++ b/fs/pstore/ram.c > @@ -913,13 +913,17 @@ static void __init ramoops_register_dummy(void) > > /* > * Prepare a dummy platform data structure to carry the module > - * parameters. If mem_size isn't set, then there are no module > - * parameters, and we can skip this. > + * parameters. If mem_size isn't set, check for dynamic ramoops > + * size and extract the information if it is set. > */ > - if (!mem_size) > + if (!mem_size && !dyn_ramoops_res.end) > return; > > pr_info("using module parameters\n"); > + if (dyn_ramoops_res.end) { > + mem_size = resource_size(&dyn_ramoops_res); > + mem_address = dyn_ramoops_res.start; > + } > > memset(&pdata, 0, sizeof(pdata)); > pdata.mem_size = mem_size; You might want to add "arch_" prefix to dyn_ramoops resource so that it would be clear that it is coming from arch code. This code needs to guard against arch not supplying this. Thanks, Pavan
On 9/11/2023 11:03 AM, Pavan Kondeti wrote: > On Sun, Sep 10, 2023 at 01:46:10AM +0530, Mukesh Ojha wrote: >> As dynamic ramoops command line parsing is now added, so >> lets add the support in ramoops driver to get the resource >> structure and add it during platform device registration. >> >> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> >> --- >> fs/pstore/ram.c | 10 +++++++--- >> 1 file changed, 7 insertions(+), 3 deletions(-) >> > > Documentation/admin-guide/ramoops.rst might need an update as well. I have said in the cover-letter under changes in v5, it is open for comment and not yet documented it yet. > >> diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c >> index 2f625e1fa8d8..e73fbbc1b5b5 100644 >> --- a/fs/pstore/ram.c >> +++ b/fs/pstore/ram.c >> @@ -913,13 +913,17 @@ static void __init ramoops_register_dummy(void) >> >> /* >> * Prepare a dummy platform data structure to carry the module >> - * parameters. If mem_size isn't set, then there are no module >> - * parameters, and we can skip this. >> + * parameters. If mem_size isn't set, check for dynamic ramoops >> + * size and extract the information if it is set. >> */ >> - if (!mem_size) >> + if (!mem_size && !dyn_ramoops_res.end) >> return; >> >> pr_info("using module parameters\n"); >> + if (dyn_ramoops_res.end) { >> + mem_size = resource_size(&dyn_ramoops_res); >> + mem_address = dyn_ramoops_res.start; >> + } >> >> memset(&pdata, 0, sizeof(pdata)); >> pdata.mem_size = mem_size; > > You might want to add "arch_" prefix to dyn_ramoops resource so that it > would be clear that it is coming from arch code. This code needs to > guard against arch not supplying this. Sure, thanks for pointing this. Agree, if we finally decide to keep it in arch/arm64 . -Mukesh > > Thanks, > Pavan
On Mon, Sep 11, 2023 at 04:21:44PM +0530, Mukesh Ojha wrote: > > > On 9/11/2023 11:03 AM, Pavan Kondeti wrote: > > On Sun, Sep 10, 2023 at 01:46:10AM +0530, Mukesh Ojha wrote: > > > As dynamic ramoops command line parsing is now added, so > > > lets add the support in ramoops driver to get the resource > > > structure and add it during platform device registration. > > > > > > Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> > > > --- > > > fs/pstore/ram.c | 10 +++++++--- > > > 1 file changed, 7 insertions(+), 3 deletions(-) > > > > > > > Documentation/admin-guide/ramoops.rst might need an update as well. > > I have said in the cover-letter under changes in v5, it is open for > comment and not yet documented it yet. > Sure. To easy on the reviewers, the under cut portion of a specific patch could be used to add footer notes like TODO/Testing etc. In this case, I was lazy to read the loong cover letter posted in this series ;-) Thanks, Pavan
On 9/12/2023 6:09 AM, Pavan Kondeti wrote: > On Mon, Sep 11, 2023 at 04:21:44PM +0530, Mukesh Ojha wrote: >> >> >> On 9/11/2023 11:03 AM, Pavan Kondeti wrote: >>> On Sun, Sep 10, 2023 at 01:46:10AM +0530, Mukesh Ojha wrote: >>>> As dynamic ramoops command line parsing is now added, so >>>> lets add the support in ramoops driver to get the resource >>>> structure and add it during platform device registration. >>>> >>>> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> >>>> --- >>>> fs/pstore/ram.c | 10 +++++++--- >>>> 1 file changed, 7 insertions(+), 3 deletions(-) >>>> >>> >>> Documentation/admin-guide/ramoops.rst might need an update as well. >> >> I have said in the cover-letter under changes in v5, it is open for >> comment and not yet documented it yet. >> > Sure. > > To easy on the reviewers, the under cut portion of a specific patch could be > used to add footer notes like TODO/Testing etc. In this case, I was lazy to > read the loong cover letter posted in this series ;-) I have seen it, will comment related to particular patch under --- . Thanks for suggestion. -Mukesh > > Thanks, > Pavan
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index 2f625e1fa8d8..e73fbbc1b5b5 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -913,13 +913,17 @@ static void __init ramoops_register_dummy(void) /* * Prepare a dummy platform data structure to carry the module - * parameters. If mem_size isn't set, then there are no module - * parameters, and we can skip this. + * parameters. If mem_size isn't set, check for dynamic ramoops + * size and extract the information if it is set. */ - if (!mem_size) + if (!mem_size && !dyn_ramoops_res.end) return; pr_info("using module parameters\n"); + if (dyn_ramoops_res.end) { + mem_size = resource_size(&dyn_ramoops_res); + mem_address = dyn_ramoops_res.start; + } memset(&pdata, 0, sizeof(pdata)); pdata.mem_size = mem_size;
As dynamic ramoops command line parsing is now added, so lets add the support in ramoops driver to get the resource structure and add it during platform device registration. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> --- fs/pstore/ram.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)