| Message ID | 1694670845-17070-7-git-send-email-shengjiu.wang@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add audio support in v4l2 framework | expand |
Hi Shenjiu, Thanks for the update. On Thu, Sep 14, 2023 at 01:54:02PM +0800, Shengjiu Wang wrote: > Audio signal processing has the requirement for memory to > memory similar as Video. > > This patch is to add this support in v4l2 framework, defined > new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and > V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format > for audio case usage. > > Defined V4L2_AUDIO_FMT_LPCM format type for audio. This would be nicer as a separate patch. Also see the related comments below. > > Defined V4L2_CAP_AUDIO_M2M capability type for audio memory > to memory case. > > The created audio device is named "/dev/v4l-audioX". > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > --- > .../userspace-api/media/v4l/audio-formats.rst | 15 +++++ > .../userspace-api/media/v4l/buffer.rst | 6 ++ > .../userspace-api/media/v4l/dev-audio.rst | 63 +++++++++++++++++++ > .../userspace-api/media/v4l/devices.rst | 1 + > .../media/v4l/pixfmt-aud-lpcm.rst | 31 +++++++++ > .../userspace-api/media/v4l/pixfmt.rst | 1 + > .../media/v4l/vidioc-enum-fmt.rst | 2 + > .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 ++ > .../media/v4l/vidioc-querycap.rst | 3 + > .../media/videodev2.h.rst.exceptions | 2 + > .../media/common/videobuf2/videobuf2-v4l2.c | 4 ++ > drivers/media/v4l2-core/v4l2-dev.c | 17 +++++ > drivers/media/v4l2-core/v4l2-ioctl.c | 53 ++++++++++++++++ > include/media/v4l2-dev.h | 2 + > include/media/v4l2-ioctl.h | 34 ++++++++++ > include/uapi/linux/videodev2.h | 25 ++++++++ > 16 files changed, 263 insertions(+) > create mode 100644 Documentation/userspace-api/media/v4l/audio-formats.rst > create mode 100644 Documentation/userspace-api/media/v4l/dev-audio.rst > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > diff --git a/Documentation/userspace-api/media/v4l/audio-formats.rst b/Documentation/userspace-api/media/v4l/audio-formats.rst > new file mode 100644 > index 000000000000..bc52712d20d3 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/audio-formats.rst > @@ -0,0 +1,15 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _audio-formats: > + > +************* > +Audio Formats > +************* > + > +These formats are used for :ref:`audio` interface only. > + > + > +.. toctree:: > + :maxdepth: 1 > + > + pixfmt-aud-lpcm > diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst > index 04dec3e570ed..80cf2cb20dfe 100644 > --- a/Documentation/userspace-api/media/v4l/buffer.rst > +++ b/Documentation/userspace-api/media/v4l/buffer.rst > @@ -438,6 +438,12 @@ enum v4l2_buf_type > * - ``V4L2_BUF_TYPE_META_OUTPUT`` > - 14 > - Buffer for metadata output, see :ref:`metadata`. > + * - ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` > + - 15 > + - Buffer for audio capture, see :ref:`audio`. > + * - ``V4L2_BUF_TYPE_AUDIO_OUTPUT`` > + - 16 > + - Buffer for audio output, see :ref:`audio`. > > > .. _buffer-flags: > diff --git a/Documentation/userspace-api/media/v4l/dev-audio.rst b/Documentation/userspace-api/media/v4l/dev-audio.rst > new file mode 100644 > index 000000000000..f9bcf0c7b056 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/dev-audio.rst > @@ -0,0 +1,63 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _audiodev: > + > +****************** > +audio Interface Capital "A"? > +****************** Too many asterisks (same a few lines above, too). > + > +The audio interface is implemented on audio device nodes. The audio device > +which uses application software for modulation or demodulation. This > +interface is intended for controlling and data streaming of such devices > + > +Audio devices are accessed through character device special files named > +``/dev/v4l-audio`` > + > +Querying Capabilities > +===================== > + > +Device nodes supporting the audio capture and output interface set the > +``V4L2_CAP_AUDIO_M2M`` flag in the ``device_caps`` field of the > +:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` > +ioctl. > + > +At least one of the read/write or streaming I/O methods must be supported. > + > + > +Data Format Negotiation > +======================= > + > +The audio device uses the :ref:`format` ioctls to select the capture format. > +The audio buffer content format is bound to that selected format. In addition > +to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be > +supported as well. > + > +To use the :ref:`format` ioctls applications set the ``type`` field of the > +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` or to > +``V4L2_BUF_TYPE_AUDIO_OUTPUT``. Both drivers and applications must set the > +remainder of the :c:type:`v4l2_format` structure to 0. > + > +.. c:type:: v4l2_audio_format > + > +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| > + > +.. flat-table:: struct v4l2_audio_format > + :header-rows: 0 > + :stub-columns: 0 > + :widths: 1 1 2 > + > + * - __u32 > + - ``rate`` > + - The sample rate, set by the application. The range is [5512, 768000]. > + * - __u32 > + - ``format`` > + - The sample format, set by the application. format is defined as > + SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8, ..., > + * - __u32 > + - ``channels`` > + - The channel number, set by the application. channel number range is > + [1, 32]. > + * - __u32 > + - ``buffersize`` > + - Maximum buffer size in bytes required for data. The value is set by the > + driver. > diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst > index 8bfbad65a9d4..8261f3468489 100644 > --- a/Documentation/userspace-api/media/v4l/devices.rst > +++ b/Documentation/userspace-api/media/v4l/devices.rst > @@ -24,3 +24,4 @@ Interfaces > dev-event > dev-subdev > dev-meta > + dev-audio > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > new file mode 100644 > index 000000000000..f9ebe2a05f69 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > @@ -0,0 +1,31 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _v4l2-aud-fmt-lpcm: > + > +************************* > +V4L2_AUDIO_FMT_LPCM ('LPCM') > +************************* > + > +Linear Pulse-Code Modulation (LPCM) > + > + > +Description > +=========== > + > +This describes audio format used by the audio memory to memory driver. > + > +It contains the following fields: > + > +.. flat-table:: > + :widths: 1 4 > + :header-rows: 1 > + :stub-columns: 0 > + > + * - Field > + - Description > + * - u32 samplerate; > + - which is the number of times per second that samples are taken. > + * - u32 sampleformat; > + - which determines the number of possible digital values that can be used to represent each sample 80 characters (or less) per line, please. Which values could this field have and what do they signify? > + * - u32 channels; > + - channel number for each sample. I suppose the rest of the buffer would be samples? This should be documented. I think there are also different ways the data could be arrangeed and this needs to be documented, too.
On Thu, Sep 14, 2023 at 6:17 PM Sakari Ailus <sakari.ailus@iki.fi> wrote: > > Hi Shenjiu, > > Thanks for the update. > > On Thu, Sep 14, 2023 at 01:54:02PM +0800, Shengjiu Wang wrote: > > Audio signal processing has the requirement for memory to > > memory similar as Video. > > > > This patch is to add this support in v4l2 framework, defined > > new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and > > V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format > > for audio case usage. > > > > Defined V4L2_AUDIO_FMT_LPCM format type for audio. > > This would be nicer as a separate patch. Also see the related comments > below. OK, will separate it. > > > > > Defined V4L2_CAP_AUDIO_M2M capability type for audio memory > > to memory case. > > > > The created audio device is named "/dev/v4l-audioX". > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > > --- > > .../userspace-api/media/v4l/audio-formats.rst | 15 +++++ > > .../userspace-api/media/v4l/buffer.rst | 6 ++ > > .../userspace-api/media/v4l/dev-audio.rst | 63 +++++++++++++++++++ > > .../userspace-api/media/v4l/devices.rst | 1 + > > .../media/v4l/pixfmt-aud-lpcm.rst | 31 +++++++++ > > .../userspace-api/media/v4l/pixfmt.rst | 1 + > > .../media/v4l/vidioc-enum-fmt.rst | 2 + > > .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 ++ > > .../media/v4l/vidioc-querycap.rst | 3 + > > .../media/videodev2.h.rst.exceptions | 2 + > > .../media/common/videobuf2/videobuf2-v4l2.c | 4 ++ > > drivers/media/v4l2-core/v4l2-dev.c | 17 +++++ > > drivers/media/v4l2-core/v4l2-ioctl.c | 53 ++++++++++++++++ > > include/media/v4l2-dev.h | 2 + > > include/media/v4l2-ioctl.h | 34 ++++++++++ > > include/uapi/linux/videodev2.h | 25 ++++++++ > > 16 files changed, 263 insertions(+) > > create mode 100644 Documentation/userspace-api/media/v4l/audio-formats.rst > > create mode 100644 Documentation/userspace-api/media/v4l/dev-audio.rst > > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > > > diff --git a/Documentation/userspace-api/media/v4l/audio-formats.rst b/Documentation/userspace-api/media/v4l/audio-formats.rst > > new file mode 100644 > > index 000000000000..bc52712d20d3 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/audio-formats.rst > > @@ -0,0 +1,15 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _audio-formats: > > + > > +************* > > +Audio Formats > > +************* > > + > > +These formats are used for :ref:`audio` interface only. > > + > > + > > +.. toctree:: > > + :maxdepth: 1 > > + > > + pixfmt-aud-lpcm > > diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst > > index 04dec3e570ed..80cf2cb20dfe 100644 > > --- a/Documentation/userspace-api/media/v4l/buffer.rst > > +++ b/Documentation/userspace-api/media/v4l/buffer.rst > > @@ -438,6 +438,12 @@ enum v4l2_buf_type > > * - ``V4L2_BUF_TYPE_META_OUTPUT`` > > - 14 > > - Buffer for metadata output, see :ref:`metadata`. > > + * - ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` > > + - 15 > > + - Buffer for audio capture, see :ref:`audio`. > > + * - ``V4L2_BUF_TYPE_AUDIO_OUTPUT`` > > + - 16 > > + - Buffer for audio output, see :ref:`audio`. > > > > > > .. _buffer-flags: > > diff --git a/Documentation/userspace-api/media/v4l/dev-audio.rst b/Documentation/userspace-api/media/v4l/dev-audio.rst > > new file mode 100644 > > index 000000000000..f9bcf0c7b056 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/dev-audio.rst > > @@ -0,0 +1,63 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _audiodev: > > + > > +****************** > > +audio Interface > > Capital "A"? OK, will modify it. > > > +****************** > > Too many asterisks (same a few lines above, too). ok, will update it. > > > + > > +The audio interface is implemented on audio device nodes. The audio device > > +which uses application software for modulation or demodulation. This > > +interface is intended for controlling and data streaming of such devices > > + > > +Audio devices are accessed through character device special files named > > +``/dev/v4l-audio`` > > + > > +Querying Capabilities > > +===================== > > + > > +Device nodes supporting the audio capture and output interface set the > > +``V4L2_CAP_AUDIO_M2M`` flag in the ``device_caps`` field of the > > +:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` > > +ioctl. > > + > > +At least one of the read/write or streaming I/O methods must be supported. > > + > > + > > +Data Format Negotiation > > +======================= > > + > > +The audio device uses the :ref:`format` ioctls to select the capture format. > > +The audio buffer content format is bound to that selected format. In addition > > +to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be > > +supported as well. > > + > > +To use the :ref:`format` ioctls applications set the ``type`` field of the > > +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` or to > > +``V4L2_BUF_TYPE_AUDIO_OUTPUT``. Both drivers and applications must set the > > +remainder of the :c:type:`v4l2_format` structure to 0. > > + > > +.. c:type:: v4l2_audio_format > > + > > +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| > > + > > +.. flat-table:: struct v4l2_audio_format > > + :header-rows: 0 > > + :stub-columns: 0 > > + :widths: 1 1 2 > > + > > + * - __u32 > > + - ``rate`` > > + - The sample rate, set by the application. The range is [5512, 768000]. > > + * - __u32 > > + - ``format`` > > + - The sample format, set by the application. format is defined as > > + SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8, ..., > > + * - __u32 > > + - ``channels`` > > + - The channel number, set by the application. channel number range is > > + [1, 32]. > > + * - __u32 > > + - ``buffersize`` > > + - Maximum buffer size in bytes required for data. The value is set by the > > + driver. > > diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst > > index 8bfbad65a9d4..8261f3468489 100644 > > --- a/Documentation/userspace-api/media/v4l/devices.rst > > +++ b/Documentation/userspace-api/media/v4l/devices.rst > > @@ -24,3 +24,4 @@ Interfaces > > dev-event > > dev-subdev > > dev-meta > > + dev-audio > > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > new file mode 100644 > > index 000000000000..f9ebe2a05f69 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > @@ -0,0 +1,31 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _v4l2-aud-fmt-lpcm: > > + > > +************************* > > +V4L2_AUDIO_FMT_LPCM ('LPCM') > > +************************* > > + > > +Linear Pulse-Code Modulation (LPCM) > > + > > + > > +Description > > +=========== > > + > > +This describes audio format used by the audio memory to memory driver. > > + > > +It contains the following fields: > > + > > +.. flat-table:: > > + :widths: 1 4 > > + :header-rows: 1 > > + :stub-columns: 0 > > + > > + * - Field > > + - Description > > + * - u32 samplerate; > > + - which is the number of times per second that samples are taken. > > + * - u32 sampleformat; > > + - which determines the number of possible digital values that can be used to represent each sample > > 80 characters (or less) per line, please. Ok, will change it. > > Which values could this field have and what do they signify? The values are SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8... which are the PCM format, defined in ALSA. > > > + * - u32 channels; > > + - channel number for each sample. > > I suppose the rest of the buffer would be samples? This should be > documented. I think there are also different ways the data could be > arrangeed and this needs to be documented, too. All data in the buffer are the samples, the 'samplerate', 'sampleformat' 'channels' I list here is try to describe the samples. I was confused how to write this document, so I list the characters. Best regards Wang Shengjiu
Hi Shengjiu, On Tue, Sep 19, 2023 at 06:31:09PM +0800, Shengjiu Wang wrote: ... > > > +************************* > > > +V4L2_AUDIO_FMT_LPCM ('LPCM') > > > +************************* Something to fix here, too...? > > > + > > > +Linear Pulse-Code Modulation (LPCM) > > > + > > > + > > > +Description > > > +=========== > > > + > > > +This describes audio format used by the audio memory to memory driver. > > > + > > > +It contains the following fields: > > > + > > > +.. flat-table:: > > > + :widths: 1 4 > > > + :header-rows: 1 > > > + :stub-columns: 0 > > > + > > > + * - Field > > > + - Description > > > + * - u32 samplerate; > > > + - which is the number of times per second that samples are taken. > > > + * - u32 sampleformat; > > > + - which determines the number of possible digital values that can be used to represent each sample > > > > 80 characters (or less) per line, please. > > Ok, will change it. > > > > > Which values could this field have and what do they signify? > > The values are SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8... > which are the PCM format, defined in ALSA. I suppose this is documented in ALSA documentation. Could you refer to that? > > > > > > + * - u32 channels; > > > + - channel number for each sample. > > > > I suppose the rest of the buffer would be samples? This should be > > documented. I think there are also different ways the data could be > > arrangeed and this needs to be documented, too. > > All data in the buffer are the samples, the 'samplerate', 'sampleformat' > 'channels' I list here is try to describe the samples. > I was confused how to write this document, so I list the characters. The layout of this data in memory needs to be documented. I think a reference to ALSA documentation would be the best.
Hi Shengjiu, I just noticed you posted a v4, but I expect that my comments below are still valid... On 14/09/2023 07:54, Shengjiu Wang wrote: > Audio signal processing has the requirement for memory to > memory similar as Video. > > This patch is to add this support in v4l2 framework, defined > new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and > V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format > for audio case usage. > > Defined V4L2_AUDIO_FMT_LPCM format type for audio. > > Defined V4L2_CAP_AUDIO_M2M capability type for audio memory > to memory case. > > The created audio device is named "/dev/v4l-audioX". > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > --- > .../userspace-api/media/v4l/audio-formats.rst | 15 +++++ > .../userspace-api/media/v4l/buffer.rst | 6 ++ > .../userspace-api/media/v4l/dev-audio.rst | 63 +++++++++++++++++++ > .../userspace-api/media/v4l/devices.rst | 1 + > .../media/v4l/pixfmt-aud-lpcm.rst | 31 +++++++++ > .../userspace-api/media/v4l/pixfmt.rst | 1 + > .../media/v4l/vidioc-enum-fmt.rst | 2 + > .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 ++ > .../media/v4l/vidioc-querycap.rst | 3 + > .../media/videodev2.h.rst.exceptions | 2 + > .../media/common/videobuf2/videobuf2-v4l2.c | 4 ++ > drivers/media/v4l2-core/v4l2-dev.c | 17 +++++ > drivers/media/v4l2-core/v4l2-ioctl.c | 53 ++++++++++++++++ > include/media/v4l2-dev.h | 2 + > include/media/v4l2-ioctl.h | 34 ++++++++++ > include/uapi/linux/videodev2.h | 25 ++++++++ > 16 files changed, 263 insertions(+) > create mode 100644 Documentation/userspace-api/media/v4l/audio-formats.rst > create mode 100644 Documentation/userspace-api/media/v4l/dev-audio.rst > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > diff --git a/Documentation/userspace-api/media/v4l/audio-formats.rst b/Documentation/userspace-api/media/v4l/audio-formats.rst > new file mode 100644 > index 000000000000..bc52712d20d3 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/audio-formats.rst > @@ -0,0 +1,15 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _audio-formats: > + > +************* > +Audio Formats > +************* > + > +These formats are used for :ref:`audio` interface only. > + > + > +.. toctree:: > + :maxdepth: 1 > + > + pixfmt-aud-lpcm > diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst > index 04dec3e570ed..80cf2cb20dfe 100644 > --- a/Documentation/userspace-api/media/v4l/buffer.rst > +++ b/Documentation/userspace-api/media/v4l/buffer.rst > @@ -438,6 +438,12 @@ enum v4l2_buf_type > * - ``V4L2_BUF_TYPE_META_OUTPUT`` > - 14 > - Buffer for metadata output, see :ref:`metadata`. > + * - ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` > + - 15 > + - Buffer for audio capture, see :ref:`audio`. > + * - ``V4L2_BUF_TYPE_AUDIO_OUTPUT`` > + - 16 > + - Buffer for audio output, see :ref:`audio`. > > > .. _buffer-flags: > diff --git a/Documentation/userspace-api/media/v4l/dev-audio.rst b/Documentation/userspace-api/media/v4l/dev-audio.rst > new file mode 100644 > index 000000000000..f9bcf0c7b056 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/dev-audio.rst Rename the file to dev-audio-mem2mem.rst as this is specific to an audio M2M interface. > @@ -0,0 +1,63 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _audiodev: > + > +****************** > +audio Interface > +****************** > + > +The audio interface is implemented on audio device nodes. The audio device > +which uses application software for modulation or demodulation. This > +interface is intended for controlling and data streaming of such devices > + > +Audio devices are accessed through character device special files named > +``/dev/v4l-audio`` I think this intro is somewhat confusing. I would recommend to copy the intro from dev-mem2mem.rst instead, adapting it for audio. > + > +Querying Capabilities > +===================== > + > +Device nodes supporting the audio capture and output interface set the > +``V4L2_CAP_AUDIO_M2M`` flag in the ``device_caps`` field of the > +:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` > +ioctl. > + > +At least one of the read/write or streaming I/O methods must be supported. M2M devices do not support read/write, only streaming I/O is supported. > + > + > +Data Format Negotiation > +======================= > + > +The audio device uses the :ref:`format` ioctls to select the capture format. > +The audio buffer content format is bound to that selected format. In addition > +to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be > +supported as well. > + > +To use the :ref:`format` ioctls applications set the ``type`` field of the > +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` or to > +``V4L2_BUF_TYPE_AUDIO_OUTPUT``. Both drivers and applications must set the > +remainder of the :c:type:`v4l2_format` structure to 0. > + > +.. c:type:: v4l2_audio_format > + > +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| > + > +.. flat-table:: struct v4l2_audio_format > + :header-rows: 0 > + :stub-columns: 0 > + :widths: 1 1 2 > + > + * - __u32 > + - ``rate`` > + - The sample rate, set by the application. The range is [5512, 768000]. > + * - __u32 > + - ``format`` > + - The sample format, set by the application. format is defined as > + SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8, ..., > + * - __u32 > + - ``channels`` > + - The channel number, set by the application. channel number range is > + [1, 32]. > + * - __u32 > + - ``buffersize`` > + - Maximum buffer size in bytes required for data. The value is set by the > + driver. > diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst > index 8bfbad65a9d4..8261f3468489 100644 > --- a/Documentation/userspace-api/media/v4l/devices.rst > +++ b/Documentation/userspace-api/media/v4l/devices.rst > @@ -24,3 +24,4 @@ Interfaces > dev-event > dev-subdev > dev-meta > + dev-audio > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > new file mode 100644 > index 000000000000..f9ebe2a05f69 > --- /dev/null > +++ b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > @@ -0,0 +1,31 @@ > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > + > +.. _v4l2-aud-fmt-lpcm: > + > +************************* > +V4L2_AUDIO_FMT_LPCM ('LPCM') > +************************* > + > +Linear Pulse-Code Modulation (LPCM) > + > + > +Description > +=========== > + > +This describes audio format used by the audio memory to memory driver. > + > +It contains the following fields: > + > +.. flat-table:: > + :widths: 1 4 > + :header-rows: 1 > + :stub-columns: 0 > + > + * - Field > + - Description > + * - u32 samplerate; > + - which is the number of times per second that samples are taken. > + * - u32 sampleformat; > + - which determines the number of possible digital values that can be used to represent each sample > + * - u32 channels; > + - channel number for each sample. See Sakari's comments. This section describes how the audio data is formatted in the buffer memory. Presumably this is already documented somewhere in the ALSA docs, so a reference to that would work. > diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst > index 11dab4a90630..e205db5fa8af 100644 > --- a/Documentation/userspace-api/media/v4l/pixfmt.rst > +++ b/Documentation/userspace-api/media/v4l/pixfmt.rst > @@ -36,3 +36,4 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.) > colorspaces > colorspaces-defs > colorspaces-details > + audio-formats > diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > index 000c154b0f98..42deb07f4ff4 100644 > --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > @@ -96,6 +96,8 @@ the ``mbus_code`` field is handled differently: > ``V4L2_BUF_TYPE_VIDEO_OVERLAY``, > ``V4L2_BUF_TYPE_SDR_CAPTURE``, > ``V4L2_BUF_TYPE_SDR_OUTPUT``, > + ``V4L2_BUF_TYPE_AUDIO_CAPTURE``, > + ``V4L2_BUF_TYPE_AUDIO_OUTPUT``, > ``V4L2_BUF_TYPE_META_CAPTURE`` and > ``V4L2_BUF_TYPE_META_OUTPUT``. > See :c:type:`v4l2_buf_type`. > diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > index 675c385e5aca..1ecb7d640057 100644 > --- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > @@ -130,6 +130,10 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical > - ``meta`` > - Definition of a metadata format, see :ref:`meta-formats`, used by > metadata capture devices. > + * - struct :c:type:`v4l2_audio_format` > + - ``audio`` > + - Definition of a audio data format, see :ref:`dev-audio`, used by > + audio capture and output devices > * - __u8 > - ``raw_data``\ [200] > - Place holder for future extensions. > diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > index 6c57b8428356..0b3cefefc86b 100644 > --- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > +++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > @@ -259,6 +259,9 @@ specification the ioctl returns an ``EINVAL`` error code. > video topology configuration, including which I/O entity is routed to > the input/output, is configured by userspace via the Media Controller. > See :ref:`media_controller`. > + * - ``V4L2_CAP_AUDIO_M2M`` > + - 0x40000000 > + - The device supports the audio Memory-To-Memory interface. > * - ``V4L2_CAP_DEVICE_CAPS`` > - 0x80000000 > - The driver fills the ``device_caps`` field. This capability can > diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions > index 3e58aac4ef0b..48ef3bce3d20 100644 > --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions > +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions > @@ -29,6 +29,8 @@ replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field` > replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` > > # Documented enum v4l2_buf_type > +replace symbol V4L2_BUF_TYPE_AUDIO_CAPTURE :c:type:`v4l2_buf_type` > +replace symbol V4L2_BUF_TYPE_AUDIO_OUTPUT :c:type:`v4l2_buf_type` > replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` > replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` > replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` > diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c > index c7a54d82a55e..12f2be2773a2 100644 > --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c > +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c > @@ -785,6 +785,10 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) > case V4L2_BUF_TYPE_META_OUTPUT: > requested_sizes[0] = f->fmt.meta.buffersize; > break; > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + requested_sizes[0] = f->fmt.audio.buffersize; > + break; > default: > return -EINVAL; > } > diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c > index f81279492682..b92c760b611a 100644 > --- a/drivers/media/v4l2-core/v4l2-dev.c > +++ b/drivers/media/v4l2-core/v4l2-dev.c > @@ -553,6 +553,7 @@ static void determine_valid_ioctls(struct video_device *vdev) > bool is_tch = vdev->vfl_type == VFL_TYPE_TOUCH; > bool is_meta = vdev->vfl_type == VFL_TYPE_VIDEO && > (vdev->device_caps & meta_caps); > + bool is_audio = vdev->vfl_type == VFL_TYPE_AUDIO; > bool is_rx = vdev->vfl_dir != VFL_DIR_TX; > bool is_tx = vdev->vfl_dir != VFL_DIR_RX; > bool is_io_mc = vdev->device_caps & V4L2_CAP_IO_MC; > @@ -664,6 +665,19 @@ static void determine_valid_ioctls(struct video_device *vdev) > SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_meta_out); > SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_meta_out); > } > + if (is_audio && is_rx) { > + /* audio capture specific ioctls */ > + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_cap); > + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_cap); > + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_cap); > + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_cap); > + } else if (is_audio && is_tx) { > + /* audio output specific ioctls */ > + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_out); > + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_out); > + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_out); > + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_out); > + } > if (is_vbi) { > /* vbi specific ioctls */ > if ((is_rx && (ops->vidioc_g_fmt_vbi_cap || > @@ -927,6 +941,9 @@ int __video_register_device(struct video_device *vdev, > case VFL_TYPE_TOUCH: > name_base = "v4l-touch"; > break; > + case VFL_TYPE_AUDIO: > + name_base = "v4l-audio"; > + break; > default: > pr_err("%s called with unknown type: %d\n", > __func__, type); > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c > index f4d9d6279094..767588d5822a 100644 > --- a/drivers/media/v4l2-core/v4l2-ioctl.c > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c > @@ -188,6 +188,8 @@ const char *v4l2_type_names[] = { > [V4L2_BUF_TYPE_SDR_OUTPUT] = "sdr-out", > [V4L2_BUF_TYPE_META_CAPTURE] = "meta-cap", > [V4L2_BUF_TYPE_META_OUTPUT] = "meta-out", > + [V4L2_BUF_TYPE_AUDIO_CAPTURE] = "audio-cap", > + [V4L2_BUF_TYPE_AUDIO_OUTPUT] = "audio-out", > }; > EXPORT_SYMBOL(v4l2_type_names); > > @@ -276,6 +278,7 @@ static void v4l_print_format(const void *arg, bool write_only) > const struct v4l2_sliced_vbi_format *sliced; > const struct v4l2_window *win; > const struct v4l2_meta_format *meta; > + const struct v4l2_audio_format *audio; > u32 pixelformat; > u32 planes; > unsigned i; > @@ -346,6 +349,12 @@ static void v4l_print_format(const void *arg, bool write_only) > pr_cont(", dataformat=%p4cc, buffersize=%u\n", > &pixelformat, meta->buffersize); > break; > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + audio = &p->fmt.audio; > + pr_cont(", rate=%u, format=%u, channels=%u, buffersize=%u\n", > + audio->rate, audio->format, audio->channels, audio->buffersize); > + break; > } > } > > @@ -927,6 +936,7 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) > bool is_tch = vfd->vfl_type == VFL_TYPE_TOUCH; > bool is_meta = vfd->vfl_type == VFL_TYPE_VIDEO && > (vfd->device_caps & meta_caps); > + bool is_audio = vfd->vfl_type == VFL_TYPE_AUDIO; > bool is_rx = vfd->vfl_dir != VFL_DIR_TX; > bool is_tx = vfd->vfl_dir != VFL_DIR_RX; > > @@ -992,6 +1002,14 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) > if (is_meta && is_tx && ops->vidioc_g_fmt_meta_out) > return 0; > break; > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + if (is_audio && is_rx && ops->vidioc_g_fmt_audio_cap) > + return 0; > + break; > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + if (is_audio && is_tx && ops->vidioc_g_fmt_audio_out) > + return 0; > + break; > default: > break; > } > @@ -1452,6 +1470,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) > case V4L2_PIX_FMT_Y210: descr = "10-bit YUYV Packed"; break; > case V4L2_PIX_FMT_Y212: descr = "12-bit YUYV Packed"; break; > case V4L2_PIX_FMT_Y216: descr = "16-bit YUYV Packed"; break; > + case V4L2_AUDIO_FMT_LPCM: descr = "Audio LPCM"; break; > > default: > /* Compressed formats */ > @@ -1596,6 +1615,16 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, > break; > ret = ops->vidioc_enum_fmt_meta_out(file, fh, arg); > break; > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + if (unlikely(!ops->vidioc_enum_fmt_audio_cap)) > + break; > + ret = ops->vidioc_enum_fmt_audio_cap(file, fh, arg); > + break; > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + if (unlikely(!ops->vidioc_enum_fmt_audio_out)) > + break; > + ret = ops->vidioc_enum_fmt_audio_out(file, fh, arg); > + break; > } > if (ret == 0) > v4l_fill_fmtdesc(p); > @@ -1672,6 +1701,10 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, > return ops->vidioc_g_fmt_meta_cap(file, fh, arg); > case V4L2_BUF_TYPE_META_OUTPUT: > return ops->vidioc_g_fmt_meta_out(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + return ops->vidioc_g_fmt_audio_cap(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + return ops->vidioc_g_fmt_audio_out(file, fh, arg); > } > return -EINVAL; > } > @@ -1783,6 +1816,16 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, > break; > memset_after(p, 0, fmt.meta); > return ops->vidioc_s_fmt_meta_out(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + if (unlikely(!ops->vidioc_s_fmt_audio_cap)) > + break; > + memset_after(p, 0, fmt.audio); > + return ops->vidioc_s_fmt_audio_cap(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + if (unlikely(!ops->vidioc_s_fmt_audio_out)) > + break; > + memset_after(p, 0, fmt.audio); > + return ops->vidioc_s_fmt_audio_out(file, fh, arg); > } > return -EINVAL; > } > @@ -1891,6 +1934,16 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops, > break; > memset_after(p, 0, fmt.meta); > return ops->vidioc_try_fmt_meta_out(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > + if (unlikely(!ops->vidioc_try_fmt_audio_cap)) > + break; > + memset_after(p, 0, fmt.audio); > + return ops->vidioc_try_fmt_audio_cap(file, fh, arg); > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > + if (unlikely(!ops->vidioc_try_fmt_audio_out)) > + break; > + memset_after(p, 0, fmt.audio); > + return ops->vidioc_try_fmt_audio_out(file, fh, arg); > } > return -EINVAL; > } > diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h > index e0a13505f88d..0924e6d1dab1 100644 > --- a/include/media/v4l2-dev.h > +++ b/include/media/v4l2-dev.h > @@ -30,6 +30,7 @@ > * @VFL_TYPE_SUBDEV: for V4L2 subdevices > * @VFL_TYPE_SDR: for Software Defined Radio tuners > * @VFL_TYPE_TOUCH: for touch sensors > + * @VFL_TYPE_AUDIO: for audio input/output devices Change this to: "for audio memory-to-memory devices" That's the only audio type we support at the moment. I don't see a need for pure capture or output audio devices, since that would be handled in alsa. > * @VFL_TYPE_MAX: number of VFL types, must always be last in the enum > */ > enum vfl_devnode_type { > @@ -39,6 +40,7 @@ enum vfl_devnode_type { > VFL_TYPE_SUBDEV, > VFL_TYPE_SDR, > VFL_TYPE_TOUCH, > + VFL_TYPE_AUDIO, > VFL_TYPE_MAX /* Shall be the last one */ > }; > > diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h > index edb733f21604..f840cf740ce1 100644 > --- a/include/media/v4l2-ioctl.h > +++ b/include/media/v4l2-ioctl.h > @@ -45,6 +45,12 @@ struct v4l2_fh; > * @vidioc_enum_fmt_meta_out: pointer to the function that implements > * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > * for metadata output > + * @vidioc_enum_fmt_audio_cap: pointer to the function that implements > + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > + * for audio capture > + * @vidioc_enum_fmt_audio_out: pointer to the function that implements > + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > + * for audio output > * @vidioc_g_fmt_vid_cap: pointer to the function that implements > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture > * in single plane mode > @@ -79,6 +85,10 @@ struct v4l2_fh; > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > * @vidioc_g_fmt_meta_out: pointer to the function that implements > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata output > + * @vidioc_g_fmt_audio_cap: pointer to the function that implements > + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio capture > + * @vidioc_g_fmt_audio_out: pointer to the function that implements > + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio output > * @vidioc_s_fmt_vid_cap: pointer to the function that implements > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture > * in single plane mode > @@ -113,6 +123,10 @@ struct v4l2_fh; > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > * @vidioc_s_fmt_meta_out: pointer to the function that implements > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata output > + * @vidioc_s_fmt_audio_cap: pointer to the function that implements > + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio capture > + * @vidioc_s_fmt_audio_out: pointer to the function that implements > + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio output > * @vidioc_try_fmt_vid_cap: pointer to the function that implements > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture > * in single plane mode > @@ -149,6 +163,10 @@ struct v4l2_fh; > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > * @vidioc_try_fmt_meta_out: pointer to the function that implements > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata output > + * @vidioc_try_fmt_audio_cap: pointer to the function that implements > + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio capture > + * @vidioc_try_fmt_audio_out: pointer to the function that implements > + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio output > * @vidioc_reqbufs: pointer to the function that implements > * :ref:`VIDIOC_REQBUFS <vidioc_reqbufs>` ioctl > * @vidioc_querybuf: pointer to the function that implements > @@ -315,6 +333,10 @@ struct v4l2_ioctl_ops { > struct v4l2_fmtdesc *f); > int (*vidioc_enum_fmt_meta_out)(struct file *file, void *fh, > struct v4l2_fmtdesc *f); > + int (*vidioc_enum_fmt_audio_cap)(struct file *file, void *fh, > + struct v4l2_fmtdesc *f); > + int (*vidioc_enum_fmt_audio_out)(struct file *file, void *fh, > + struct v4l2_fmtdesc *f); > > /* VIDIOC_G_FMT handlers */ > int (*vidioc_g_fmt_vid_cap)(struct file *file, void *fh, > @@ -345,6 +367,10 @@ struct v4l2_ioctl_ops { > struct v4l2_format *f); > int (*vidioc_g_fmt_meta_out)(struct file *file, void *fh, > struct v4l2_format *f); > + int (*vidioc_g_fmt_audio_cap)(struct file *file, void *fh, > + struct v4l2_format *f); > + int (*vidioc_g_fmt_audio_out)(struct file *file, void *fh, > + struct v4l2_format *f); > > /* VIDIOC_S_FMT handlers */ > int (*vidioc_s_fmt_vid_cap)(struct file *file, void *fh, > @@ -375,6 +401,10 @@ struct v4l2_ioctl_ops { > struct v4l2_format *f); > int (*vidioc_s_fmt_meta_out)(struct file *file, void *fh, > struct v4l2_format *f); > + int (*vidioc_s_fmt_audio_cap)(struct file *file, void *fh, > + struct v4l2_format *f); > + int (*vidioc_s_fmt_audio_out)(struct file *file, void *fh, > + struct v4l2_format *f); > > /* VIDIOC_TRY_FMT handlers */ > int (*vidioc_try_fmt_vid_cap)(struct file *file, void *fh, > @@ -405,6 +435,10 @@ struct v4l2_ioctl_ops { > struct v4l2_format *f); > int (*vidioc_try_fmt_meta_out)(struct file *file, void *fh, > struct v4l2_format *f); > + int (*vidioc_try_fmt_audio_cap)(struct file *file, void *fh, > + struct v4l2_format *f); > + int (*vidioc_try_fmt_audio_out)(struct file *file, void *fh, > + struct v4l2_format *f); > > /* Buffer handlers */ > int (*vidioc_reqbufs)(struct file *file, void *fh, > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h > index 78260e5d9985..8dc615f2b60c 100644 > --- a/include/uapi/linux/videodev2.h > +++ b/include/uapi/linux/videodev2.h > @@ -153,6 +153,8 @@ enum v4l2_buf_type { > V4L2_BUF_TYPE_SDR_OUTPUT = 12, > V4L2_BUF_TYPE_META_CAPTURE = 13, > V4L2_BUF_TYPE_META_OUTPUT = 14, > + V4L2_BUF_TYPE_AUDIO_CAPTURE = 15, > + V4L2_BUF_TYPE_AUDIO_OUTPUT = 16, > /* Deprecated, do not use */ > V4L2_BUF_TYPE_PRIVATE = 0x80, > }; > @@ -169,6 +171,7 @@ enum v4l2_buf_type { > || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ > || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT \ > || (type) == V4L2_BUF_TYPE_SDR_OUTPUT \ > + || (type) == V4L2_BUF_TYPE_AUDIO_OUTPUT \ > || (type) == V4L2_BUF_TYPE_META_OUTPUT) > > #define V4L2_TYPE_IS_CAPTURE(type) (!V4L2_TYPE_IS_OUTPUT(type)) > @@ -508,6 +511,7 @@ struct v4l2_capability { > #define V4L2_CAP_TOUCH 0x10000000 /* Is a touch device */ > > #define V4L2_CAP_IO_MC 0x20000000 /* Is input/output controlled by the media controller */ > +#define V4L2_CAP_AUDIO_M2M 0x40000000 > > #define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ > > @@ -838,6 +842,9 @@ struct v4l2_pix_format { > #define V4L2_META_FMT_RK_ISP1_PARAMS v4l2_fourcc('R', 'K', '1', 'P') /* Rockchip ISP1 3A Parameters */ > #define V4L2_META_FMT_RK_ISP1_STAT_3A v4l2_fourcc('R', 'K', '1', 'S') /* Rockchip ISP1 3A Statistics */ > > +/* Audio-data formats */ > +#define V4L2_AUDIO_FMT_LPCM v4l2_fourcc('L', 'P', 'C', 'M') /* audio lpcm */ > + Hmm, this I am uncertain about. This doesn't add anything. If you enumerate the formats, they will all report just this format, so you still don't know which actual audio formats are supported. The real audio format is the 'format' field. > /* priv field value to indicates that subsequent fields are valid. */ > #define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe > > @@ -2417,6 +2424,22 @@ struct v4l2_meta_format { > __u32 buffersize; > } __attribute__ ((packed)); > > +/** > + * struct v4l2_audio_format - audio data format definition > + * @pixelformat: little endian four character code (fourcc) > + * @rate: sample rate > + * @format: sample format > + * @channels: channel numbers > + * @buffersize: maximum size in bytes required for data > + */ > +struct v4l2_audio_format { > + __u32 pixelformat; Why not just drop this field, and instead use the format field? You would have to update the ENUM_FMT documentation to indicate that for audio m2m device the pixelformat field of v4l2_fmtdesc is actually the audio format, and that it is not a fourcc, but a SNDRV_PCM_FORMAT_ format. v4l_fill_fmtdesc can just add 'case SNDRV_PCM_FORMAT_U8:' etc., since they luckily won't conflict with the existing fourccs as far as I can tell. One problem might be the use of %p4cc as a printf formatter for fourcc values, that would fail with these formats. One option to solve this could be to add a define to videodev2.h that converts a SNDRV_PCM_FORMAT_* to a fourcc, e.g.: #define v4l2_fourcc_pcm(pcm_fmt) v4l2_fourcc('A', 'U', (pcm_fmt) / 10 + '0', (pcm_fmt) % 10 + '0') So all audio formats end up like 'ADXX' where XX is the SNDRV_PCM_FORMAT_* value. You would also need a define to translate a fourcc back to a pcm format. This scheme would allow %p4cc to continue to be used. Alternatively, you need to check all places where %p4cc is used in the media subsystem core and see if you need to check if it is an audio buffer type, and if so, just use %u. I'm not quite sure which of the two options is best. More input on this would be welcome. > + __u32 rate; > + __u32 format; > + __u32 channels; > + __u32 buffersize; > +} __attribute__ ((packed)); > + > /** > * struct v4l2_format - stream data format > * @type: enum v4l2_buf_type; type of the data stream > @@ -2425,6 +2448,7 @@ struct v4l2_meta_format { > * @win: definition of an overlaid image > * @vbi: raw VBI capture or output parameters > * @sliced: sliced VBI capture or output parameters > + * @audio: definition of an audio format > * @raw_data: placeholder for future extensions and custom formats > * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta > * and @raw_data > @@ -2439,6 +2463,7 @@ struct v4l2_format { > struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ > struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */ > struct v4l2_meta_format meta; /* V4L2_BUF_TYPE_META_CAPTURE */ > + struct v4l2_audio_format audio; /* V4L2_BUF_TYPE_AUDIO_CAPTURE */ > __u8 raw_data[200]; /* user-defined */ > } fmt; > }; Regards, Hans
On Wed, Sep 20, 2023 at 6:12 PM Hans Verkuil <hverkuil@xs4all.nl> wrote: > > Hi Shengjiu, > > I just noticed you posted a v4, but I expect that my comments below are still valid... > > On 14/09/2023 07:54, Shengjiu Wang wrote: > > Audio signal processing has the requirement for memory to > > memory similar as Video. > > > > This patch is to add this support in v4l2 framework, defined > > new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and > > V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format > > for audio case usage. > > > > Defined V4L2_AUDIO_FMT_LPCM format type for audio. > > > > Defined V4L2_CAP_AUDIO_M2M capability type for audio memory > > to memory case. > > > > The created audio device is named "/dev/v4l-audioX". > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > > --- > > .../userspace-api/media/v4l/audio-formats.rst | 15 +++++ > > .../userspace-api/media/v4l/buffer.rst | 6 ++ > > .../userspace-api/media/v4l/dev-audio.rst | 63 +++++++++++++++++++ > > .../userspace-api/media/v4l/devices.rst | 1 + > > .../media/v4l/pixfmt-aud-lpcm.rst | 31 +++++++++ > > .../userspace-api/media/v4l/pixfmt.rst | 1 + > > .../media/v4l/vidioc-enum-fmt.rst | 2 + > > .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 ++ > > .../media/v4l/vidioc-querycap.rst | 3 + > > .../media/videodev2.h.rst.exceptions | 2 + > > .../media/common/videobuf2/videobuf2-v4l2.c | 4 ++ > > drivers/media/v4l2-core/v4l2-dev.c | 17 +++++ > > drivers/media/v4l2-core/v4l2-ioctl.c | 53 ++++++++++++++++ > > include/media/v4l2-dev.h | 2 + > > include/media/v4l2-ioctl.h | 34 ++++++++++ > > include/uapi/linux/videodev2.h | 25 ++++++++ > > 16 files changed, 263 insertions(+) > > create mode 100644 Documentation/userspace-api/media/v4l/audio-formats.rst > > create mode 100644 Documentation/userspace-api/media/v4l/dev-audio.rst > > create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > > > diff --git a/Documentation/userspace-api/media/v4l/audio-formats.rst b/Documentation/userspace-api/media/v4l/audio-formats.rst > > new file mode 100644 > > index 000000000000..bc52712d20d3 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/audio-formats.rst > > @@ -0,0 +1,15 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _audio-formats: > > + > > +************* > > +Audio Formats > > +************* > > + > > +These formats are used for :ref:`audio` interface only. > > + > > + > > +.. toctree:: > > + :maxdepth: 1 > > + > > + pixfmt-aud-lpcm > > diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst > > index 04dec3e570ed..80cf2cb20dfe 100644 > > --- a/Documentation/userspace-api/media/v4l/buffer.rst > > +++ b/Documentation/userspace-api/media/v4l/buffer.rst > > @@ -438,6 +438,12 @@ enum v4l2_buf_type > > * - ``V4L2_BUF_TYPE_META_OUTPUT`` > > - 14 > > - Buffer for metadata output, see :ref:`metadata`. > > + * - ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` > > + - 15 > > + - Buffer for audio capture, see :ref:`audio`. > > + * - ``V4L2_BUF_TYPE_AUDIO_OUTPUT`` > > + - 16 > > + - Buffer for audio output, see :ref:`audio`. > > > > > > .. _buffer-flags: > > diff --git a/Documentation/userspace-api/media/v4l/dev-audio.rst b/Documentation/userspace-api/media/v4l/dev-audio.rst > > new file mode 100644 > > index 000000000000..f9bcf0c7b056 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/dev-audio.rst > > Rename the file to dev-audio-mem2mem.rst as this is specific to an audio > M2M interface. > > > @@ -0,0 +1,63 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _audiodev: > > + > > +****************** > > +audio Interface > > +****************** > > + > > +The audio interface is implemented on audio device nodes. The audio device > > +which uses application software for modulation or demodulation. This > > +interface is intended for controlling and data streaming of such devices > > + > > +Audio devices are accessed through character device special files named > > +``/dev/v4l-audio`` > > I think this intro is somewhat confusing. I would recommend to copy the intro > from dev-mem2mem.rst instead, adapting it for audio. > > > + > > +Querying Capabilities > > +===================== > > + > > +Device nodes supporting the audio capture and output interface set the > > +``V4L2_CAP_AUDIO_M2M`` flag in the ``device_caps`` field of the > > +:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` > > +ioctl. > > + > > +At least one of the read/write or streaming I/O methods must be supported. > > M2M devices do not support read/write, only streaming I/O is supported. > > > + > > + > > +Data Format Negotiation > > +======================= > > + > > +The audio device uses the :ref:`format` ioctls to select the capture format. > > +The audio buffer content format is bound to that selected format. In addition > > +to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be > > +supported as well. > > + > > +To use the :ref:`format` ioctls applications set the ``type`` field of the > > +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` or to > > +``V4L2_BUF_TYPE_AUDIO_OUTPUT``. Both drivers and applications must set the > > +remainder of the :c:type:`v4l2_format` structure to 0. > > + > > +.. c:type:: v4l2_audio_format > > + > > +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| > > + > > +.. flat-table:: struct v4l2_audio_format > > + :header-rows: 0 > > + :stub-columns: 0 > > + :widths: 1 1 2 > > + > > + * - __u32 > > + - ``rate`` > > + - The sample rate, set by the application. The range is [5512, 768000]. > > + * - __u32 > > + - ``format`` > > + - The sample format, set by the application. format is defined as > > + SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8, ..., > > + * - __u32 > > + - ``channels`` > > + - The channel number, set by the application. channel number range is > > + [1, 32]. > > + * - __u32 > > + - ``buffersize`` > > + - Maximum buffer size in bytes required for data. The value is set by the > > + driver. > > diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst > > index 8bfbad65a9d4..8261f3468489 100644 > > --- a/Documentation/userspace-api/media/v4l/devices.rst > > +++ b/Documentation/userspace-api/media/v4l/devices.rst > > @@ -24,3 +24,4 @@ Interfaces > > dev-event > > dev-subdev > > dev-meta > > + dev-audio > > diff --git a/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > new file mode 100644 > > index 000000000000..f9ebe2a05f69 > > --- /dev/null > > +++ b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst > > @@ -0,0 +1,31 @@ > > +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later > > + > > +.. _v4l2-aud-fmt-lpcm: > > + > > +************************* > > +V4L2_AUDIO_FMT_LPCM ('LPCM') > > +************************* > > + > > +Linear Pulse-Code Modulation (LPCM) > > + > > + > > +Description > > +=========== > > + > > +This describes audio format used by the audio memory to memory driver. > > + > > +It contains the following fields: > > + > > +.. flat-table:: > > + :widths: 1 4 > > + :header-rows: 1 > > + :stub-columns: 0 > > + > > + * - Field > > + - Description > > + * - u32 samplerate; > > + - which is the number of times per second that samples are taken. > > + * - u32 sampleformat; > > + - which determines the number of possible digital values that can be used to represent each sample > > + * - u32 channels; > > + - channel number for each sample. > > See Sakari's comments. This section describes how the audio data is formatted > in the buffer memory. Presumably this is already documented somewhere in the ALSA > docs, so a reference to that would work. > > > diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst > > index 11dab4a90630..e205db5fa8af 100644 > > --- a/Documentation/userspace-api/media/v4l/pixfmt.rst > > +++ b/Documentation/userspace-api/media/v4l/pixfmt.rst > > @@ -36,3 +36,4 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.) > > colorspaces > > colorspaces-defs > > colorspaces-details > > + audio-formats > > diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > > index 000c154b0f98..42deb07f4ff4 100644 > > --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > > +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst > > @@ -96,6 +96,8 @@ the ``mbus_code`` field is handled differently: > > ``V4L2_BUF_TYPE_VIDEO_OVERLAY``, > > ``V4L2_BUF_TYPE_SDR_CAPTURE``, > > ``V4L2_BUF_TYPE_SDR_OUTPUT``, > > + ``V4L2_BUF_TYPE_AUDIO_CAPTURE``, > > + ``V4L2_BUF_TYPE_AUDIO_OUTPUT``, > > ``V4L2_BUF_TYPE_META_CAPTURE`` and > > ``V4L2_BUF_TYPE_META_OUTPUT``. > > See :c:type:`v4l2_buf_type`. > > diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > > index 675c385e5aca..1ecb7d640057 100644 > > --- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > > +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst > > @@ -130,6 +130,10 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical > > - ``meta`` > > - Definition of a metadata format, see :ref:`meta-formats`, used by > > metadata capture devices. > > + * - struct :c:type:`v4l2_audio_format` > > + - ``audio`` > > + - Definition of a audio data format, see :ref:`dev-audio`, used by > > + audio capture and output devices > > * - __u8 > > - ``raw_data``\ [200] > > - Place holder for future extensions. > > diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > > index 6c57b8428356..0b3cefefc86b 100644 > > --- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > > +++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst > > @@ -259,6 +259,9 @@ specification the ioctl returns an ``EINVAL`` error code. > > video topology configuration, including which I/O entity is routed to > > the input/output, is configured by userspace via the Media Controller. > > See :ref:`media_controller`. > > + * - ``V4L2_CAP_AUDIO_M2M`` > > + - 0x40000000 > > + - The device supports the audio Memory-To-Memory interface. > > * - ``V4L2_CAP_DEVICE_CAPS`` > > - 0x80000000 > > - The driver fills the ``device_caps`` field. This capability can > > diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions > > index 3e58aac4ef0b..48ef3bce3d20 100644 > > --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions > > +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions > > @@ -29,6 +29,8 @@ replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field` > > replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` > > > > # Documented enum v4l2_buf_type > > +replace symbol V4L2_BUF_TYPE_AUDIO_CAPTURE :c:type:`v4l2_buf_type` > > +replace symbol V4L2_BUF_TYPE_AUDIO_OUTPUT :c:type:`v4l2_buf_type` > > replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` > > replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` > > replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` > > diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c > > index c7a54d82a55e..12f2be2773a2 100644 > > --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c > > +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c > > @@ -785,6 +785,10 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) > > case V4L2_BUF_TYPE_META_OUTPUT: > > requested_sizes[0] = f->fmt.meta.buffersize; > > break; > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + requested_sizes[0] = f->fmt.audio.buffersize; > > + break; > > default: > > return -EINVAL; > > } > > diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c > > index f81279492682..b92c760b611a 100644 > > --- a/drivers/media/v4l2-core/v4l2-dev.c > > +++ b/drivers/media/v4l2-core/v4l2-dev.c > > @@ -553,6 +553,7 @@ static void determine_valid_ioctls(struct video_device *vdev) > > bool is_tch = vdev->vfl_type == VFL_TYPE_TOUCH; > > bool is_meta = vdev->vfl_type == VFL_TYPE_VIDEO && > > (vdev->device_caps & meta_caps); > > + bool is_audio = vdev->vfl_type == VFL_TYPE_AUDIO; > > bool is_rx = vdev->vfl_dir != VFL_DIR_TX; > > bool is_tx = vdev->vfl_dir != VFL_DIR_RX; > > bool is_io_mc = vdev->device_caps & V4L2_CAP_IO_MC; > > @@ -664,6 +665,19 @@ static void determine_valid_ioctls(struct video_device *vdev) > > SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_meta_out); > > SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_meta_out); > > } > > + if (is_audio && is_rx) { > > + /* audio capture specific ioctls */ > > + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_cap); > > + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_cap); > > + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_cap); > > + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_cap); > > + } else if (is_audio && is_tx) { > > + /* audio output specific ioctls */ > > + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_out); > > + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_out); > > + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_out); > > + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_out); > > + } > > if (is_vbi) { > > /* vbi specific ioctls */ > > if ((is_rx && (ops->vidioc_g_fmt_vbi_cap || > > @@ -927,6 +941,9 @@ int __video_register_device(struct video_device *vdev, > > case VFL_TYPE_TOUCH: > > name_base = "v4l-touch"; > > break; > > + case VFL_TYPE_AUDIO: > > + name_base = "v4l-audio"; > > + break; > > default: > > pr_err("%s called with unknown type: %d\n", > > __func__, type); > > diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c > > index f4d9d6279094..767588d5822a 100644 > > --- a/drivers/media/v4l2-core/v4l2-ioctl.c > > +++ b/drivers/media/v4l2-core/v4l2-ioctl.c > > @@ -188,6 +188,8 @@ const char *v4l2_type_names[] = { > > [V4L2_BUF_TYPE_SDR_OUTPUT] = "sdr-out", > > [V4L2_BUF_TYPE_META_CAPTURE] = "meta-cap", > > [V4L2_BUF_TYPE_META_OUTPUT] = "meta-out", > > + [V4L2_BUF_TYPE_AUDIO_CAPTURE] = "audio-cap", > > + [V4L2_BUF_TYPE_AUDIO_OUTPUT] = "audio-out", > > }; > > EXPORT_SYMBOL(v4l2_type_names); > > > > @@ -276,6 +278,7 @@ static void v4l_print_format(const void *arg, bool write_only) > > const struct v4l2_sliced_vbi_format *sliced; > > const struct v4l2_window *win; > > const struct v4l2_meta_format *meta; > > + const struct v4l2_audio_format *audio; > > u32 pixelformat; > > u32 planes; > > unsigned i; > > @@ -346,6 +349,12 @@ static void v4l_print_format(const void *arg, bool write_only) > > pr_cont(", dataformat=%p4cc, buffersize=%u\n", > > &pixelformat, meta->buffersize); > > break; > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + audio = &p->fmt.audio; > > + pr_cont(", rate=%u, format=%u, channels=%u, buffersize=%u\n", > > + audio->rate, audio->format, audio->channels, audio->buffersize); > > + break; > > } > > } > > > > @@ -927,6 +936,7 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) > > bool is_tch = vfd->vfl_type == VFL_TYPE_TOUCH; > > bool is_meta = vfd->vfl_type == VFL_TYPE_VIDEO && > > (vfd->device_caps & meta_caps); > > + bool is_audio = vfd->vfl_type == VFL_TYPE_AUDIO; > > bool is_rx = vfd->vfl_dir != VFL_DIR_TX; > > bool is_tx = vfd->vfl_dir != VFL_DIR_RX; > > > > @@ -992,6 +1002,14 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) > > if (is_meta && is_tx && ops->vidioc_g_fmt_meta_out) > > return 0; > > break; > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + if (is_audio && is_rx && ops->vidioc_g_fmt_audio_cap) > > + return 0; > > + break; > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + if (is_audio && is_tx && ops->vidioc_g_fmt_audio_out) > > + return 0; > > + break; > > default: > > break; > > } > > @@ -1452,6 +1470,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) > > case V4L2_PIX_FMT_Y210: descr = "10-bit YUYV Packed"; break; > > case V4L2_PIX_FMT_Y212: descr = "12-bit YUYV Packed"; break; > > case V4L2_PIX_FMT_Y216: descr = "16-bit YUYV Packed"; break; > > + case V4L2_AUDIO_FMT_LPCM: descr = "Audio LPCM"; break; > > > > default: > > /* Compressed formats */ > > @@ -1596,6 +1615,16 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, > > break; > > ret = ops->vidioc_enum_fmt_meta_out(file, fh, arg); > > break; > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + if (unlikely(!ops->vidioc_enum_fmt_audio_cap)) > > + break; > > + ret = ops->vidioc_enum_fmt_audio_cap(file, fh, arg); > > + break; > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + if (unlikely(!ops->vidioc_enum_fmt_audio_out)) > > + break; > > + ret = ops->vidioc_enum_fmt_audio_out(file, fh, arg); > > + break; > > } > > if (ret == 0) > > v4l_fill_fmtdesc(p); > > @@ -1672,6 +1701,10 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, > > return ops->vidioc_g_fmt_meta_cap(file, fh, arg); > > case V4L2_BUF_TYPE_META_OUTPUT: > > return ops->vidioc_g_fmt_meta_out(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + return ops->vidioc_g_fmt_audio_cap(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + return ops->vidioc_g_fmt_audio_out(file, fh, arg); > > } > > return -EINVAL; > > } > > @@ -1783,6 +1816,16 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, > > break; > > memset_after(p, 0, fmt.meta); > > return ops->vidioc_s_fmt_meta_out(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + if (unlikely(!ops->vidioc_s_fmt_audio_cap)) > > + break; > > + memset_after(p, 0, fmt.audio); > > + return ops->vidioc_s_fmt_audio_cap(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + if (unlikely(!ops->vidioc_s_fmt_audio_out)) > > + break; > > + memset_after(p, 0, fmt.audio); > > + return ops->vidioc_s_fmt_audio_out(file, fh, arg); > > } > > return -EINVAL; > > } > > @@ -1891,6 +1934,16 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops, > > break; > > memset_after(p, 0, fmt.meta); > > return ops->vidioc_try_fmt_meta_out(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_CAPTURE: > > + if (unlikely(!ops->vidioc_try_fmt_audio_cap)) > > + break; > > + memset_after(p, 0, fmt.audio); > > + return ops->vidioc_try_fmt_audio_cap(file, fh, arg); > > + case V4L2_BUF_TYPE_AUDIO_OUTPUT: > > + if (unlikely(!ops->vidioc_try_fmt_audio_out)) > > + break; > > + memset_after(p, 0, fmt.audio); > > + return ops->vidioc_try_fmt_audio_out(file, fh, arg); > > } > > return -EINVAL; > > } > > diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h > > index e0a13505f88d..0924e6d1dab1 100644 > > --- a/include/media/v4l2-dev.h > > +++ b/include/media/v4l2-dev.h > > @@ -30,6 +30,7 @@ > > * @VFL_TYPE_SUBDEV: for V4L2 subdevices > > * @VFL_TYPE_SDR: for Software Defined Radio tuners > > * @VFL_TYPE_TOUCH: for touch sensors > > + * @VFL_TYPE_AUDIO: for audio input/output devices > > Change this to: "for audio memory-to-memory devices" > That's the only audio type we support at the moment. I don't see a need > for pure capture or output audio devices, since that would be handled in > alsa. > > > * @VFL_TYPE_MAX: number of VFL types, must always be last in the enum > > */ > > enum vfl_devnode_type { > > @@ -39,6 +40,7 @@ enum vfl_devnode_type { > > VFL_TYPE_SUBDEV, > > VFL_TYPE_SDR, > > VFL_TYPE_TOUCH, > > + VFL_TYPE_AUDIO, > > VFL_TYPE_MAX /* Shall be the last one */ > > }; > > > > diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h > > index edb733f21604..f840cf740ce1 100644 > > --- a/include/media/v4l2-ioctl.h > > +++ b/include/media/v4l2-ioctl.h > > @@ -45,6 +45,12 @@ struct v4l2_fh; > > * @vidioc_enum_fmt_meta_out: pointer to the function that implements > > * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > > * for metadata output > > + * @vidioc_enum_fmt_audio_cap: pointer to the function that implements > > + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > > + * for audio capture > > + * @vidioc_enum_fmt_audio_out: pointer to the function that implements > > + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic > > + * for audio output > > * @vidioc_g_fmt_vid_cap: pointer to the function that implements > > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture > > * in single plane mode > > @@ -79,6 +85,10 @@ struct v4l2_fh; > > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > > * @vidioc_g_fmt_meta_out: pointer to the function that implements > > * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata output > > + * @vidioc_g_fmt_audio_cap: pointer to the function that implements > > + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio capture > > + * @vidioc_g_fmt_audio_out: pointer to the function that implements > > + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio output > > * @vidioc_s_fmt_vid_cap: pointer to the function that implements > > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture > > * in single plane mode > > @@ -113,6 +123,10 @@ struct v4l2_fh; > > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > > * @vidioc_s_fmt_meta_out: pointer to the function that implements > > * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata output > > + * @vidioc_s_fmt_audio_cap: pointer to the function that implements > > + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio capture > > + * @vidioc_s_fmt_audio_out: pointer to the function that implements > > + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio output > > * @vidioc_try_fmt_vid_cap: pointer to the function that implements > > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture > > * in single plane mode > > @@ -149,6 +163,10 @@ struct v4l2_fh; > > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata capture > > * @vidioc_try_fmt_meta_out: pointer to the function that implements > > * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata output > > + * @vidioc_try_fmt_audio_cap: pointer to the function that implements > > + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio capture > > + * @vidioc_try_fmt_audio_out: pointer to the function that implements > > + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio output > > * @vidioc_reqbufs: pointer to the function that implements > > * :ref:`VIDIOC_REQBUFS <vidioc_reqbufs>` ioctl > > * @vidioc_querybuf: pointer to the function that implements > > @@ -315,6 +333,10 @@ struct v4l2_ioctl_ops { > > struct v4l2_fmtdesc *f); > > int (*vidioc_enum_fmt_meta_out)(struct file *file, void *fh, > > struct v4l2_fmtdesc *f); > > + int (*vidioc_enum_fmt_audio_cap)(struct file *file, void *fh, > > + struct v4l2_fmtdesc *f); > > + int (*vidioc_enum_fmt_audio_out)(struct file *file, void *fh, > > + struct v4l2_fmtdesc *f); > > > > /* VIDIOC_G_FMT handlers */ > > int (*vidioc_g_fmt_vid_cap)(struct file *file, void *fh, > > @@ -345,6 +367,10 @@ struct v4l2_ioctl_ops { > > struct v4l2_format *f); > > int (*vidioc_g_fmt_meta_out)(struct file *file, void *fh, > > struct v4l2_format *f); > > + int (*vidioc_g_fmt_audio_cap)(struct file *file, void *fh, > > + struct v4l2_format *f); > > + int (*vidioc_g_fmt_audio_out)(struct file *file, void *fh, > > + struct v4l2_format *f); > > > > /* VIDIOC_S_FMT handlers */ > > int (*vidioc_s_fmt_vid_cap)(struct file *file, void *fh, > > @@ -375,6 +401,10 @@ struct v4l2_ioctl_ops { > > struct v4l2_format *f); > > int (*vidioc_s_fmt_meta_out)(struct file *file, void *fh, > > struct v4l2_format *f); > > + int (*vidioc_s_fmt_audio_cap)(struct file *file, void *fh, > > + struct v4l2_format *f); > > + int (*vidioc_s_fmt_audio_out)(struct file *file, void *fh, > > + struct v4l2_format *f); > > > > /* VIDIOC_TRY_FMT handlers */ > > int (*vidioc_try_fmt_vid_cap)(struct file *file, void *fh, > > @@ -405,6 +435,10 @@ struct v4l2_ioctl_ops { > > struct v4l2_format *f); > > int (*vidioc_try_fmt_meta_out)(struct file *file, void *fh, > > struct v4l2_format *f); > > + int (*vidioc_try_fmt_audio_cap)(struct file *file, void *fh, > > + struct v4l2_format *f); > > + int (*vidioc_try_fmt_audio_out)(struct file *file, void *fh, > > + struct v4l2_format *f); > > > > /* Buffer handlers */ > > int (*vidioc_reqbufs)(struct file *file, void *fh, > > diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h > > index 78260e5d9985..8dc615f2b60c 100644 > > --- a/include/uapi/linux/videodev2.h > > +++ b/include/uapi/linux/videodev2.h > > @@ -153,6 +153,8 @@ enum v4l2_buf_type { > > V4L2_BUF_TYPE_SDR_OUTPUT = 12, > > V4L2_BUF_TYPE_META_CAPTURE = 13, > > V4L2_BUF_TYPE_META_OUTPUT = 14, > > + V4L2_BUF_TYPE_AUDIO_CAPTURE = 15, > > + V4L2_BUF_TYPE_AUDIO_OUTPUT = 16, > > /* Deprecated, do not use */ > > V4L2_BUF_TYPE_PRIVATE = 0x80, > > }; > > @@ -169,6 +171,7 @@ enum v4l2_buf_type { > > || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ > > || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT \ > > || (type) == V4L2_BUF_TYPE_SDR_OUTPUT \ > > + || (type) == V4L2_BUF_TYPE_AUDIO_OUTPUT \ > > || (type) == V4L2_BUF_TYPE_META_OUTPUT) > > > > #define V4L2_TYPE_IS_CAPTURE(type) (!V4L2_TYPE_IS_OUTPUT(type)) > > @@ -508,6 +511,7 @@ struct v4l2_capability { > > #define V4L2_CAP_TOUCH 0x10000000 /* Is a touch device */ > > > > #define V4L2_CAP_IO_MC 0x20000000 /* Is input/output controlled by the media controller */ > > +#define V4L2_CAP_AUDIO_M2M 0x40000000 > > > > #define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ > > > > @@ -838,6 +842,9 @@ struct v4l2_pix_format { > > #define V4L2_META_FMT_RK_ISP1_PARAMS v4l2_fourcc('R', 'K', '1', 'P') /* Rockchip ISP1 3A Parameters */ > > #define V4L2_META_FMT_RK_ISP1_STAT_3A v4l2_fourcc('R', 'K', '1', 'S') /* Rockchip ISP1 3A Statistics */ > > > > +/* Audio-data formats */ > > +#define V4L2_AUDIO_FMT_LPCM v4l2_fourcc('L', 'P', 'C', 'M') /* audio lpcm */ > > + > > Hmm, this I am uncertain about. This doesn't add anything. If you enumerate the > formats, they will all report just this format, so you still don't know which > actual audio formats are supported. > > The real audio format is the 'format' field. > > > /* priv field value to indicates that subsequent fields are valid. */ > > #define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe > > > > @@ -2417,6 +2424,22 @@ struct v4l2_meta_format { > > __u32 buffersize; > > } __attribute__ ((packed)); > > > > +/** > > + * struct v4l2_audio_format - audio data format definition > > + * @pixelformat: little endian four character code (fourcc) > > + * @rate: sample rate > > + * @format: sample format > > + * @channels: channel numbers > > + * @buffersize: maximum size in bytes required for data > > + */ > > +struct v4l2_audio_format { > > + __u32 pixelformat; > > Why not just drop this field, and instead use the format field? > > You would have to update the ENUM_FMT documentation to indicate that for > audio m2m device the pixelformat field of v4l2_fmtdesc is actually the > audio format, and that it is not a fourcc, but a SNDRV_PCM_FORMAT_ format. > > v4l_fill_fmtdesc can just add 'case SNDRV_PCM_FORMAT_U8:' etc., since they > luckily won't conflict with the existing fourccs as far as I can tell. > > One problem might be the use of %p4cc as a printf formatter for fourcc > values, that would fail with these formats. > > One option to solve this could be to add a define to videodev2.h that converts > a SNDRV_PCM_FORMAT_* to a fourcc, e.g.: > > #define v4l2_fourcc_pcm(pcm_fmt) v4l2_fourcc('A', 'U', (pcm_fmt) / 10 + '0', (pcm_fmt) % 10 + '0') > > So all audio formats end up like 'ADXX' where XX is the SNDRV_PCM_FORMAT_* value. > > You would also need a define to translate a fourcc back to a pcm format. > > This scheme would allow %p4cc to continue to be used. Alternatively, you need > to check all places where %p4cc is used in the media subsystem core and see if > you need to check if it is an audio buffer type, and if so, just use %u. > > I'm not quite sure which of the two options is best. > > More input on this would be welcome. One thing I try to avoid is to include the asound.h, which has the definition of 'format', because in user space, there is another copy in alsa-lib. there will be conflict in userspace for include videodev2.h/asound.h and asoundlib.h. Another reason for adding V4L2_AUDIO_FMT_LPCM, I think use LPCM is general for audio cases, maybe in the future there will be a requirement for non-PCM, like MP3/AAC format. If use SNDRV_PCM_FORMAT_*, there will be a lot of pixfmt need to be added. a little complicated:) 'format' field is one character of LPCM. From this point of view, it seems LPCM is simple. Best regards Wang shengjiu > > > + __u32 rate; > > + __u32 format; > > + __u32 channels; > > + __u32 buffersize; > > +} __attribute__ ((packed)); > > + > > /** > > * struct v4l2_format - stream data format > > * @type: enum v4l2_buf_type; type of the data stream > > @@ -2425,6 +2448,7 @@ struct v4l2_meta_format { > > * @win: definition of an overlaid image > > * @vbi: raw VBI capture or output parameters > > * @sliced: sliced VBI capture or output parameters > > + * @audio: definition of an audio format > > * @raw_data: placeholder for future extensions and custom formats > > * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta > > * and @raw_data > > @@ -2439,6 +2463,7 @@ struct v4l2_format { > > struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ > > struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */ > > struct v4l2_meta_format meta; /* V4L2_BUF_TYPE_META_CAPTURE */ > > + struct v4l2_audio_format audio; /* V4L2_BUF_TYPE_AUDIO_CAPTURE */ > > __u8 raw_data[200]; /* user-defined */ > > } fmt; > > }; > > Regards, > > Hans
diff --git a/Documentation/userspace-api/media/v4l/audio-formats.rst b/Documentation/userspace-api/media/v4l/audio-formats.rst new file mode 100644 index 000000000000..bc52712d20d3 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/audio-formats.rst @@ -0,0 +1,15 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _audio-formats: + +************* +Audio Formats +************* + +These formats are used for :ref:`audio` interface only. + + +.. toctree:: + :maxdepth: 1 + + pixfmt-aud-lpcm diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst index 04dec3e570ed..80cf2cb20dfe 100644 --- a/Documentation/userspace-api/media/v4l/buffer.rst +++ b/Documentation/userspace-api/media/v4l/buffer.rst @@ -438,6 +438,12 @@ enum v4l2_buf_type * - ``V4L2_BUF_TYPE_META_OUTPUT`` - 14 - Buffer for metadata output, see :ref:`metadata`. + * - ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` + - 15 + - Buffer for audio capture, see :ref:`audio`. + * - ``V4L2_BUF_TYPE_AUDIO_OUTPUT`` + - 16 + - Buffer for audio output, see :ref:`audio`. .. _buffer-flags: diff --git a/Documentation/userspace-api/media/v4l/dev-audio.rst b/Documentation/userspace-api/media/v4l/dev-audio.rst new file mode 100644 index 000000000000..f9bcf0c7b056 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/dev-audio.rst @@ -0,0 +1,63 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _audiodev: + +****************** +audio Interface +****************** + +The audio interface is implemented on audio device nodes. The audio device +which uses application software for modulation or demodulation. This +interface is intended for controlling and data streaming of such devices + +Audio devices are accessed through character device special files named +``/dev/v4l-audio`` + +Querying Capabilities +===================== + +Device nodes supporting the audio capture and output interface set the +``V4L2_CAP_AUDIO_M2M`` flag in the ``device_caps`` field of the +:c:type:`v4l2_capability` structure returned by the :c:func:`VIDIOC_QUERYCAP` +ioctl. + +At least one of the read/write or streaming I/O methods must be supported. + + +Data Format Negotiation +======================= + +The audio device uses the :ref:`format` ioctls to select the capture format. +The audio buffer content format is bound to that selected format. In addition +to the basic :ref:`format` ioctls, the :c:func:`VIDIOC_ENUM_FMT` ioctl must be +supported as well. + +To use the :ref:`format` ioctls applications set the ``type`` field of the +:c:type:`v4l2_format` structure to ``V4L2_BUF_TYPE_AUDIO_CAPTURE`` or to +``V4L2_BUF_TYPE_AUDIO_OUTPUT``. Both drivers and applications must set the +remainder of the :c:type:`v4l2_format` structure to 0. + +.. c:type:: v4l2_audio_format + +.. tabularcolumns:: |p{1.4cm}|p{2.4cm}|p{13.5cm}| + +.. flat-table:: struct v4l2_audio_format + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``rate`` + - The sample rate, set by the application. The range is [5512, 768000]. + * - __u32 + - ``format`` + - The sample format, set by the application. format is defined as + SNDRV_PCM_FORMAT_S8, SNDRV_PCM_FORMAT_U8, ..., + * - __u32 + - ``channels`` + - The channel number, set by the application. channel number range is + [1, 32]. + * - __u32 + - ``buffersize`` + - Maximum buffer size in bytes required for data. The value is set by the + driver. diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst index 8bfbad65a9d4..8261f3468489 100644 --- a/Documentation/userspace-api/media/v4l/devices.rst +++ b/Documentation/userspace-api/media/v4l/devices.rst @@ -24,3 +24,4 @@ Interfaces dev-event dev-subdev dev-meta + dev-audio diff --git a/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst new file mode 100644 index 000000000000..f9ebe2a05f69 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst @@ -0,0 +1,31 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _v4l2-aud-fmt-lpcm: + +************************* +V4L2_AUDIO_FMT_LPCM ('LPCM') +************************* + +Linear Pulse-Code Modulation (LPCM) + + +Description +=========== + +This describes audio format used by the audio memory to memory driver. + +It contains the following fields: + +.. flat-table:: + :widths: 1 4 + :header-rows: 1 + :stub-columns: 0 + + * - Field + - Description + * - u32 samplerate; + - which is the number of times per second that samples are taken. + * - u32 sampleformat; + - which determines the number of possible digital values that can be used to represent each sample + * - u32 channels; + - channel number for each sample. diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst index 11dab4a90630..e205db5fa8af 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt.rst @@ -36,3 +36,4 @@ see also :ref:`VIDIOC_G_FBUF <VIDIOC_G_FBUF>`.) colorspaces colorspaces-defs colorspaces-details + audio-formats diff --git a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst index 000c154b0f98..42deb07f4ff4 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-enum-fmt.rst @@ -96,6 +96,8 @@ the ``mbus_code`` field is handled differently: ``V4L2_BUF_TYPE_VIDEO_OVERLAY``, ``V4L2_BUF_TYPE_SDR_CAPTURE``, ``V4L2_BUF_TYPE_SDR_OUTPUT``, + ``V4L2_BUF_TYPE_AUDIO_CAPTURE``, + ``V4L2_BUF_TYPE_AUDIO_OUTPUT``, ``V4L2_BUF_TYPE_META_CAPTURE`` and ``V4L2_BUF_TYPE_META_OUTPUT``. See :c:type:`v4l2_buf_type`. diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst index 675c385e5aca..1ecb7d640057 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-g-fmt.rst @@ -130,6 +130,10 @@ The format as returned by :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` must be identical - ``meta`` - Definition of a metadata format, see :ref:`meta-formats`, used by metadata capture devices. + * - struct :c:type:`v4l2_audio_format` + - ``audio`` + - Definition of a audio data format, see :ref:`dev-audio`, used by + audio capture and output devices * - __u8 - ``raw_data``\ [200] - Place holder for future extensions. diff --git a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst index 6c57b8428356..0b3cefefc86b 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-querycap.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-querycap.rst @@ -259,6 +259,9 @@ specification the ioctl returns an ``EINVAL`` error code. video topology configuration, including which I/O entity is routed to the input/output, is configured by userspace via the Media Controller. See :ref:`media_controller`. + * - ``V4L2_CAP_AUDIO_M2M`` + - 0x40000000 + - The device supports the audio Memory-To-Memory interface. * - ``V4L2_CAP_DEVICE_CAPS`` - 0x80000000 - The driver fills the ``device_caps`` field. This capability can diff --git a/Documentation/userspace-api/media/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/videodev2.h.rst.exceptions index 3e58aac4ef0b..48ef3bce3d20 100644 --- a/Documentation/userspace-api/media/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/videodev2.h.rst.exceptions @@ -29,6 +29,8 @@ replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field` replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` # Documented enum v4l2_buf_type +replace symbol V4L2_BUF_TYPE_AUDIO_CAPTURE :c:type:`v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_AUDIO_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c index c7a54d82a55e..12f2be2773a2 100644 --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c @@ -785,6 +785,10 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) case V4L2_BUF_TYPE_META_OUTPUT: requested_sizes[0] = f->fmt.meta.buffersize; break; + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + requested_sizes[0] = f->fmt.audio.buffersize; + break; default: return -EINVAL; } diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c index f81279492682..b92c760b611a 100644 --- a/drivers/media/v4l2-core/v4l2-dev.c +++ b/drivers/media/v4l2-core/v4l2-dev.c @@ -553,6 +553,7 @@ static void determine_valid_ioctls(struct video_device *vdev) bool is_tch = vdev->vfl_type == VFL_TYPE_TOUCH; bool is_meta = vdev->vfl_type == VFL_TYPE_VIDEO && (vdev->device_caps & meta_caps); + bool is_audio = vdev->vfl_type == VFL_TYPE_AUDIO; bool is_rx = vdev->vfl_dir != VFL_DIR_TX; bool is_tx = vdev->vfl_dir != VFL_DIR_RX; bool is_io_mc = vdev->device_caps & V4L2_CAP_IO_MC; @@ -664,6 +665,19 @@ static void determine_valid_ioctls(struct video_device *vdev) SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_meta_out); SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_meta_out); } + if (is_audio && is_rx) { + /* audio capture specific ioctls */ + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_cap); + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_cap); + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_cap); + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_cap); + } else if (is_audio && is_tx) { + /* audio output specific ioctls */ + SET_VALID_IOCTL(ops, VIDIOC_ENUM_FMT, vidioc_enum_fmt_audio_out); + SET_VALID_IOCTL(ops, VIDIOC_G_FMT, vidioc_g_fmt_audio_out); + SET_VALID_IOCTL(ops, VIDIOC_S_FMT, vidioc_s_fmt_audio_out); + SET_VALID_IOCTL(ops, VIDIOC_TRY_FMT, vidioc_try_fmt_audio_out); + } if (is_vbi) { /* vbi specific ioctls */ if ((is_rx && (ops->vidioc_g_fmt_vbi_cap || @@ -927,6 +941,9 @@ int __video_register_device(struct video_device *vdev, case VFL_TYPE_TOUCH: name_base = "v4l-touch"; break; + case VFL_TYPE_AUDIO: + name_base = "v4l-audio"; + break; default: pr_err("%s called with unknown type: %d\n", __func__, type); diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index f4d9d6279094..767588d5822a 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -188,6 +188,8 @@ const char *v4l2_type_names[] = { [V4L2_BUF_TYPE_SDR_OUTPUT] = "sdr-out", [V4L2_BUF_TYPE_META_CAPTURE] = "meta-cap", [V4L2_BUF_TYPE_META_OUTPUT] = "meta-out", + [V4L2_BUF_TYPE_AUDIO_CAPTURE] = "audio-cap", + [V4L2_BUF_TYPE_AUDIO_OUTPUT] = "audio-out", }; EXPORT_SYMBOL(v4l2_type_names); @@ -276,6 +278,7 @@ static void v4l_print_format(const void *arg, bool write_only) const struct v4l2_sliced_vbi_format *sliced; const struct v4l2_window *win; const struct v4l2_meta_format *meta; + const struct v4l2_audio_format *audio; u32 pixelformat; u32 planes; unsigned i; @@ -346,6 +349,12 @@ static void v4l_print_format(const void *arg, bool write_only) pr_cont(", dataformat=%p4cc, buffersize=%u\n", &pixelformat, meta->buffersize); break; + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + audio = &p->fmt.audio; + pr_cont(", rate=%u, format=%u, channels=%u, buffersize=%u\n", + audio->rate, audio->format, audio->channels, audio->buffersize); + break; } } @@ -927,6 +936,7 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) bool is_tch = vfd->vfl_type == VFL_TYPE_TOUCH; bool is_meta = vfd->vfl_type == VFL_TYPE_VIDEO && (vfd->device_caps & meta_caps); + bool is_audio = vfd->vfl_type == VFL_TYPE_AUDIO; bool is_rx = vfd->vfl_dir != VFL_DIR_TX; bool is_tx = vfd->vfl_dir != VFL_DIR_RX; @@ -992,6 +1002,14 @@ static int check_fmt(struct file *file, enum v4l2_buf_type type) if (is_meta && is_tx && ops->vidioc_g_fmt_meta_out) return 0; break; + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + if (is_audio && is_rx && ops->vidioc_g_fmt_audio_cap) + return 0; + break; + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + if (is_audio && is_tx && ops->vidioc_g_fmt_audio_out) + return 0; + break; default: break; } @@ -1452,6 +1470,7 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt) case V4L2_PIX_FMT_Y210: descr = "10-bit YUYV Packed"; break; case V4L2_PIX_FMT_Y212: descr = "12-bit YUYV Packed"; break; case V4L2_PIX_FMT_Y216: descr = "16-bit YUYV Packed"; break; + case V4L2_AUDIO_FMT_LPCM: descr = "Audio LPCM"; break; default: /* Compressed formats */ @@ -1596,6 +1615,16 @@ static int v4l_enum_fmt(const struct v4l2_ioctl_ops *ops, break; ret = ops->vidioc_enum_fmt_meta_out(file, fh, arg); break; + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + if (unlikely(!ops->vidioc_enum_fmt_audio_cap)) + break; + ret = ops->vidioc_enum_fmt_audio_cap(file, fh, arg); + break; + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + if (unlikely(!ops->vidioc_enum_fmt_audio_out)) + break; + ret = ops->vidioc_enum_fmt_audio_out(file, fh, arg); + break; } if (ret == 0) v4l_fill_fmtdesc(p); @@ -1672,6 +1701,10 @@ static int v4l_g_fmt(const struct v4l2_ioctl_ops *ops, return ops->vidioc_g_fmt_meta_cap(file, fh, arg); case V4L2_BUF_TYPE_META_OUTPUT: return ops->vidioc_g_fmt_meta_out(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + return ops->vidioc_g_fmt_audio_cap(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + return ops->vidioc_g_fmt_audio_out(file, fh, arg); } return -EINVAL; } @@ -1783,6 +1816,16 @@ static int v4l_s_fmt(const struct v4l2_ioctl_ops *ops, break; memset_after(p, 0, fmt.meta); return ops->vidioc_s_fmt_meta_out(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + if (unlikely(!ops->vidioc_s_fmt_audio_cap)) + break; + memset_after(p, 0, fmt.audio); + return ops->vidioc_s_fmt_audio_cap(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + if (unlikely(!ops->vidioc_s_fmt_audio_out)) + break; + memset_after(p, 0, fmt.audio); + return ops->vidioc_s_fmt_audio_out(file, fh, arg); } return -EINVAL; } @@ -1891,6 +1934,16 @@ static int v4l_try_fmt(const struct v4l2_ioctl_ops *ops, break; memset_after(p, 0, fmt.meta); return ops->vidioc_try_fmt_meta_out(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_CAPTURE: + if (unlikely(!ops->vidioc_try_fmt_audio_cap)) + break; + memset_after(p, 0, fmt.audio); + return ops->vidioc_try_fmt_audio_cap(file, fh, arg); + case V4L2_BUF_TYPE_AUDIO_OUTPUT: + if (unlikely(!ops->vidioc_try_fmt_audio_out)) + break; + memset_after(p, 0, fmt.audio); + return ops->vidioc_try_fmt_audio_out(file, fh, arg); } return -EINVAL; } diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index e0a13505f88d..0924e6d1dab1 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -30,6 +30,7 @@ * @VFL_TYPE_SUBDEV: for V4L2 subdevices * @VFL_TYPE_SDR: for Software Defined Radio tuners * @VFL_TYPE_TOUCH: for touch sensors + * @VFL_TYPE_AUDIO: for audio input/output devices * @VFL_TYPE_MAX: number of VFL types, must always be last in the enum */ enum vfl_devnode_type { @@ -39,6 +40,7 @@ enum vfl_devnode_type { VFL_TYPE_SUBDEV, VFL_TYPE_SDR, VFL_TYPE_TOUCH, + VFL_TYPE_AUDIO, VFL_TYPE_MAX /* Shall be the last one */ }; diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index edb733f21604..f840cf740ce1 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -45,6 +45,12 @@ struct v4l2_fh; * @vidioc_enum_fmt_meta_out: pointer to the function that implements * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic * for metadata output + * @vidioc_enum_fmt_audio_cap: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for audio capture + * @vidioc_enum_fmt_audio_out: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for audio output * @vidioc_g_fmt_vid_cap: pointer to the function that implements * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture * in single plane mode @@ -79,6 +85,10 @@ struct v4l2_fh; * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata capture * @vidioc_g_fmt_meta_out: pointer to the function that implements * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_g_fmt_audio_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio capture + * @vidioc_g_fmt_audio_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for audio output * @vidioc_s_fmt_vid_cap: pointer to the function that implements * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture * in single plane mode @@ -113,6 +123,10 @@ struct v4l2_fh; * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata capture * @vidioc_s_fmt_meta_out: pointer to the function that implements * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_s_fmt_audio_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio capture + * @vidioc_s_fmt_audio_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for audio output * @vidioc_try_fmt_vid_cap: pointer to the function that implements * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture * in single plane mode @@ -149,6 +163,10 @@ struct v4l2_fh; * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata capture * @vidioc_try_fmt_meta_out: pointer to the function that implements * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_try_fmt_audio_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio capture + * @vidioc_try_fmt_audio_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for audio output * @vidioc_reqbufs: pointer to the function that implements * :ref:`VIDIOC_REQBUFS <vidioc_reqbufs>` ioctl * @vidioc_querybuf: pointer to the function that implements @@ -315,6 +333,10 @@ struct v4l2_ioctl_ops { struct v4l2_fmtdesc *f); int (*vidioc_enum_fmt_meta_out)(struct file *file, void *fh, struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_audio_cap)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_audio_out)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); /* VIDIOC_G_FMT handlers */ int (*vidioc_g_fmt_vid_cap)(struct file *file, void *fh, @@ -345,6 +367,10 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_g_fmt_meta_out)(struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_g_fmt_audio_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_audio_out)(struct file *file, void *fh, + struct v4l2_format *f); /* VIDIOC_S_FMT handlers */ int (*vidioc_s_fmt_vid_cap)(struct file *file, void *fh, @@ -375,6 +401,10 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_s_fmt_meta_out)(struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_s_fmt_audio_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_audio_out)(struct file *file, void *fh, + struct v4l2_format *f); /* VIDIOC_TRY_FMT handlers */ int (*vidioc_try_fmt_vid_cap)(struct file *file, void *fh, @@ -405,6 +435,10 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_try_fmt_meta_out)(struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_try_fmt_audio_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_audio_out)(struct file *file, void *fh, + struct v4l2_format *f); /* Buffer handlers */ int (*vidioc_reqbufs)(struct file *file, void *fh, diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 78260e5d9985..8dc615f2b60c 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -153,6 +153,8 @@ enum v4l2_buf_type { V4L2_BUF_TYPE_SDR_OUTPUT = 12, V4L2_BUF_TYPE_META_CAPTURE = 13, V4L2_BUF_TYPE_META_OUTPUT = 14, + V4L2_BUF_TYPE_AUDIO_CAPTURE = 15, + V4L2_BUF_TYPE_AUDIO_OUTPUT = 16, /* Deprecated, do not use */ V4L2_BUF_TYPE_PRIVATE = 0x80, }; @@ -169,6 +171,7 @@ enum v4l2_buf_type { || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT \ || (type) == V4L2_BUF_TYPE_SDR_OUTPUT \ + || (type) == V4L2_BUF_TYPE_AUDIO_OUTPUT \ || (type) == V4L2_BUF_TYPE_META_OUTPUT) #define V4L2_TYPE_IS_CAPTURE(type) (!V4L2_TYPE_IS_OUTPUT(type)) @@ -508,6 +511,7 @@ struct v4l2_capability { #define V4L2_CAP_TOUCH 0x10000000 /* Is a touch device */ #define V4L2_CAP_IO_MC 0x20000000 /* Is input/output controlled by the media controller */ +#define V4L2_CAP_AUDIO_M2M 0x40000000 #define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ @@ -838,6 +842,9 @@ struct v4l2_pix_format { #define V4L2_META_FMT_RK_ISP1_PARAMS v4l2_fourcc('R', 'K', '1', 'P') /* Rockchip ISP1 3A Parameters */ #define V4L2_META_FMT_RK_ISP1_STAT_3A v4l2_fourcc('R', 'K', '1', 'S') /* Rockchip ISP1 3A Statistics */ +/* Audio-data formats */ +#define V4L2_AUDIO_FMT_LPCM v4l2_fourcc('L', 'P', 'C', 'M') /* audio lpcm */ + /* priv field value to indicates that subsequent fields are valid. */ #define V4L2_PIX_FMT_PRIV_MAGIC 0xfeedcafe @@ -2417,6 +2424,22 @@ struct v4l2_meta_format { __u32 buffersize; } __attribute__ ((packed)); +/** + * struct v4l2_audio_format - audio data format definition + * @pixelformat: little endian four character code (fourcc) + * @rate: sample rate + * @format: sample format + * @channels: channel numbers + * @buffersize: maximum size in bytes required for data + */ +struct v4l2_audio_format { + __u32 pixelformat; + __u32 rate; + __u32 format; + __u32 channels; + __u32 buffersize; +} __attribute__ ((packed)); + /** * struct v4l2_format - stream data format * @type: enum v4l2_buf_type; type of the data stream @@ -2425,6 +2448,7 @@ struct v4l2_meta_format { * @win: definition of an overlaid image * @vbi: raw VBI capture or output parameters * @sliced: sliced VBI capture or output parameters + * @audio: definition of an audio format * @raw_data: placeholder for future extensions and custom formats * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta * and @raw_data @@ -2439,6 +2463,7 @@ struct v4l2_format { struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ struct v4l2_sdr_format sdr; /* V4L2_BUF_TYPE_SDR_CAPTURE */ struct v4l2_meta_format meta; /* V4L2_BUF_TYPE_META_CAPTURE */ + struct v4l2_audio_format audio; /* V4L2_BUF_TYPE_AUDIO_CAPTURE */ __u8 raw_data[200]; /* user-defined */ } fmt; };
Audio signal processing has the requirement for memory to memory similar as Video. This patch is to add this support in v4l2 framework, defined new buffer type V4L2_BUF_TYPE_AUDIO_CAPTURE and V4L2_BUF_TYPE_AUDIO_OUTPUT, defined new format v4l2_audio_format for audio case usage. Defined V4L2_AUDIO_FMT_LPCM format type for audio. Defined V4L2_CAP_AUDIO_M2M capability type for audio memory to memory case. The created audio device is named "/dev/v4l-audioX". Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- .../userspace-api/media/v4l/audio-formats.rst | 15 +++++ .../userspace-api/media/v4l/buffer.rst | 6 ++ .../userspace-api/media/v4l/dev-audio.rst | 63 +++++++++++++++++++ .../userspace-api/media/v4l/devices.rst | 1 + .../media/v4l/pixfmt-aud-lpcm.rst | 31 +++++++++ .../userspace-api/media/v4l/pixfmt.rst | 1 + .../media/v4l/vidioc-enum-fmt.rst | 2 + .../userspace-api/media/v4l/vidioc-g-fmt.rst | 4 ++ .../media/v4l/vidioc-querycap.rst | 3 + .../media/videodev2.h.rst.exceptions | 2 + .../media/common/videobuf2/videobuf2-v4l2.c | 4 ++ drivers/media/v4l2-core/v4l2-dev.c | 17 +++++ drivers/media/v4l2-core/v4l2-ioctl.c | 53 ++++++++++++++++ include/media/v4l2-dev.h | 2 + include/media/v4l2-ioctl.h | 34 ++++++++++ include/uapi/linux/videodev2.h | 25 ++++++++ 16 files changed, 263 insertions(+) create mode 100644 Documentation/userspace-api/media/v4l/audio-formats.rst create mode 100644 Documentation/userspace-api/media/v4l/dev-audio.rst create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-aud-lpcm.rst