| Message ID | 20230912045157.177966-23-claudiu.beznea.uj@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add new Renesas RZ/G3S SoC and RZ/G3S SMARC EVK | expand |
Hi Claudiu, On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: > From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Add minimal clock and reset support for RZ/G3S SoC to be able to boot > Linux from SD Card/eMMC. This includes necessary core clocks for booting > and GIC, SCIF, GPIO, SD0 mod clocks and resets. > > Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Thanks for your patch! > --- /dev/null > +++ b/drivers/clk/renesas/r9a08g045-cpg.c > @@ -0,0 +1,217 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * RZ/G3S CPG driver > + * > + * Copyright (C) 2023 Renesas Electronics Corp. > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/device.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > + > +#include <dt-bindings/clock/r9a08g045-cpg.h> > + > +#include "rzg2l-cpg.h" > + > +/* RZ/G3S Specific registers. */ > +#define G3S_CPG_PL2_DDIV (0x204) > +#define G3S_CPG_SDHI_DDIV (0x218) > +#define G3S_CPG_PLL_DSEL (0x240) > +#define G3S_CPG_SDHI_DSEL (0x244) > +#define G3S_CLKSELSTATUS (0x284) > + > +/* RZ/G3S Specific division configuration. */ > +#define G3S_DIVPL2B DDIV_PACK(G3S_CPG_PL2_DDIV, 4, 3) > +#define G3S_DIV_SDHI0 DDIV_PACK(G3S_CPG_SDHI_DDIV, 0, 1) > + > +/* RZ/G3S Clock status configuration. */ > +#define G3S_DIVPL1A_STS DDIV_PACK(CPG_CLKSTATUS, 0, 1) > +#define G3S_DIVPL2B_STS DDIV_PACK(CPG_CLKSTATUS, 5, 1) > +#define G3S_DIVPL3A_STS DDIV_PACK(CPG_CLKSTATUS, 8, 1) > +#define G3S_DIVPL3B_STS DDIV_PACK(CPG_CLKSTATUS, 9, 1) > +#define G3S_DIVPL3C_STS DDIV_PACK(CPG_CLKSTATUS, 10, 1) > +#define G3S_DIV_SDHI0_STS DDIV_PACK(CPG_CLKSTATUS, 24, 1) The register at offset 0x280 is called CPG_CLKDIVSTATUS, so you probably want to add and use a G3S-specific definition. > +#define G3S_SEL_PLL4_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 6, 1) > +#define G3S_SEL_SDHI0_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 16, 1) > + > +/* RZ/G3S Specific clocks select. */ > +#define G3S_SEL_PLL4 SEL_PLL_PACK(G3S_CPG_PLL_DSEL, 6, 1) > +#define G3S_SEL_SDHI0 SEL_PLL_PACK(G3S_CPG_SDHI_DSEL, 0, 2) > + > +/* PLL 1/4/6 configuration registers macro. */ > +#define G3S_PLL146_CONF(clk1, clk2) ((clk1) << 22 | (clk2) << 12) > + > +#define DEF_G3S_MUX(_name, _id, _conf, _parent_names, _mux_flags, _clk_flags) \ > + DEF_TYPE(_name, _id, CLK_TYPE_MUX, .conf = (_conf), \ > + .parent_names = (_parent_names), \ > + .num_parents = ARRAY_SIZE((_parent_names)), \ > + .mux_flags = CLK_MUX_HIWORD_MASK | (_mux_flags), \ > + .flag = (_clk_flags)) > + > +enum clk_ids { > + /* Core Clock Outputs exported to DT */ > + LAST_DT_CORE_CLK = R9A08G045_SWD, > + > + /* External Input Clocks */ > + CLK_EXTAL, > + > + /* Internal Core Clocks */ > + CLK_OSC_DIV1000, > + CLK_PLL1, > + CLK_PLL2, > + CLK_PLL2_DIV2, > + CLK_PLL2_DIV2_8, > + CLK_PLL2_DIV6, > + CLK_PLL3, > + CLK_PLL3_DIV2, > + CLK_PLL3_DIV2_2, Do you need CLK_PLL3_DIV2_2? When adding support for R9A07G043_CLK_AT later, you can define it as CLK_PLL3_DIV2 / 2. > + CLK_PLL3_DIV2_4, > + CLK_PLL3_DIV2_8, > + CLK_PLL3_DIV6, > + CLK_PLL4, > + CLK_PLL6, > + CLK_PLL6_DIV2, > + CLK_SEL_SDHI0, > + CLK_SEL_PLL4, > + CLK_P1_DIV2, > + CLK_P3_DIV2, Do you need CLK_P1_DIV2 and CLK_P3_DIV2? I don't see them in Figure 7.3 ("Clock System Diagram (2)"). > + CLK_SD0_DIV, CLK_SD0_DIV is unused. > + CLK_SD0_DIV4, > + CLK_S0_DIV2, CLK_S0_DIV2 is unused. > + > + /* Module Clocks */ > + MOD_CLK_BASE, > +}; > + > +/* Divider tables */ > +static const struct clk_div_table dtable_1_2[] = { > + {0, 1}, "{ 0, 1 }," etc... > + {1, 2}, > + {0, 0}, > +}; > + > +static const struct clk_div_table dtable_1_8[] = { > + {0, 1}, > + {1, 2}, > + {2, 4}, > + {3, 8}, > + {0, 0}, > +}; > + > +static const struct clk_div_table dtable_1_32[] = { > + {0, 1}, > + {1, 2}, > + {2, 4}, > + {3, 8}, > + {4, 32}, > + {0, 0}, > +}; > + > +/* Mux clock names tables. */ > +static const char * const sel_sdhi[] = { ".pll2_div2", ".pll6", ".pll2_div6" }; > +static const char * const sel_pll4[] = { ".osc_div1000", ".pll4" }; > + > +/* Mux clock indexes tables. */ indices > +static const u32 mtable_sd[] = { 0, 2, 3 }; > +static const u32 mtable_pll4[] = { 0, 1 }; > + > +static const struct cpg_core_clk r9a08g045_core_clks[] __initconst = { > + /* External Clock Inputs */ > + DEF_INPUT("extal", CLK_EXTAL), > + > + /* Internal Core Clocks */ > + DEF_FIXED(".osc", R9A08G045_OSCCLK, CLK_EXTAL, 1, 1), "OSC", as this is not an internal core clock. > + DEF_FIXED(".osc2", R9A08G045_OSCCLK2, CLK_EXTAL, 1, 3), "OSC2" > + DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000), > + DEF_G3S_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, G3S_PLL146_CONF(0x4, 0x8)), > + DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3), > + DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3), > + DEF_FIXED(".pll4", CLK_PLL4, CLK_EXTAL, 100, 3), > + DEF_FIXED(".pll6", CLK_PLL6, CLK_EXTAL, 125, 6), > + DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2), > + DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8), > + DEF_FIXED(".pll2_div6", CLK_PLL2_DIV6, CLK_PLL2, 1, 6), > + DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2), > + DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2), > + DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4), > + DEF_FIXED(".pll3_div2_8", CLK_PLL3_DIV2_8, CLK_PLL3_DIV2, 1, 8), > + DEF_FIXED(".pll3_div6", CLK_PLL3_DIV6, CLK_PLL3, 1, 6), > + DEF_FIXED(".pll6_div2", CLK_PLL6_DIV2, CLK_PLL6, 1, 2), > + DEF_SD_MUX(".sel_sd0", CLK_SEL_SDHI0, G3S_SEL_SDHI0, G3S_SEL_SDHI0_STS, sel_sdhi, > + mtable_sd, 0, NULL), > + DEF_SD_MUX(".sel_pll4", CLK_SEL_PLL4, G3S_SEL_PLL4, G3S_SEL_PLL4_STS, sel_pll4, > + mtable_pll4, CLK_SET_PARENT_GATE, NULL), > + > + /* Core output clk */ > + DEF_G3S_DIV("I", R9A08G045_CLK_I, CLK_PLL1, DIVPL1A, G3S_DIVPL1A_STS, dtable_1_8, > + 0, 0, NULL), > + DEF_G3S_DIV("P0", R9A08G045_CLK_P0, CLK_PLL2_DIV2_8, G3S_DIVPL2B, G3S_DIVPL2B_STS, > + dtable_1_32, 0, 0, NULL), > + DEF_G3S_DIV("SD0", R9A08G045_CLK_SD0, CLK_SEL_SDHI0, G3S_DIV_SDHI0, G3S_DIV_SDHI0_STS, > + dtable_1_2, 800000000UL, CLK_SET_RATE_PARENT, DIV_NOTIF), > + DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A08G045_CLK_SD0, 1, 4), ".sd0_div4", as this is not a public core clock. > + DEF_FIXED("M0", R9A08G045_CLK_M0, CLK_PLL3_DIV2_4, 1, 1), > + DEF_G3S_DIV("P1", R9A08G045_CLK_P1, CLK_PLL3_DIV2_4, DIVPL3A, G3S_DIVPL3A_STS, > + dtable_1_32, 0, 0, NULL), > + DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A08G045_CLK_P1, 1, 2), > + DEF_G3S_DIV("P2", R9A08G045_CLK_P2, CLK_PLL3_DIV2_8, DIVPL3B, G3S_DIVPL3B_STS, > + dtable_1_32, 0, 0, NULL), > + DEF_G3S_DIV("P3", R9A08G045_CLK_P3, CLK_PLL3_DIV2_4, DIVPL3C, G3S_DIVPL3C_STS, > + dtable_1_32, 0, 0, NULL), > + DEF_FIXED("P3_DIV2", CLK_P3_DIV2, R9A08G045_CLK_P3, 1, 2), > + DEF_FIXED("S0", R9A08G045_CLK_S0, CLK_SEL_PLL4, 1, 2), > + DEF_FIXED("S0_DIV2", CLK_S0_DIV2, R9A08G045_CLK_S0, 1, 2), > +}; Gr{oetje,eeting}s, Geert
Hi, Geert, On 15.09.2023 15:52, Geert Uytterhoeven wrote: > Hi Claudiu, > > On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >> >> Add minimal clock and reset support for RZ/G3S SoC to be able to boot >> Linux from SD Card/eMMC. This includes necessary core clocks for booting >> and GIC, SCIF, GPIO, SD0 mod clocks and resets. >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Thanks for your patch! > >> --- /dev/null >> +++ b/drivers/clk/renesas/r9a08g045-cpg.c >> @@ -0,0 +1,217 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * RZ/G3S CPG driver >> + * >> + * Copyright (C) 2023 Renesas Electronics Corp. >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/device.h> >> +#include <linux/init.h> >> +#include <linux/kernel.h> >> + >> +#include <dt-bindings/clock/r9a08g045-cpg.h> >> + >> +#include "rzg2l-cpg.h" >> + >> +/* RZ/G3S Specific registers. */ >> +#define G3S_CPG_PL2_DDIV (0x204) >> +#define G3S_CPG_SDHI_DDIV (0x218) >> +#define G3S_CPG_PLL_DSEL (0x240) >> +#define G3S_CPG_SDHI_DSEL (0x244) >> +#define G3S_CLKSELSTATUS (0x284) >> + >> +/* RZ/G3S Specific division configuration. */ >> +#define G3S_DIVPL2B DDIV_PACK(G3S_CPG_PL2_DDIV, 4, 3) >> +#define G3S_DIV_SDHI0 DDIV_PACK(G3S_CPG_SDHI_DDIV, 0, 1) >> + >> +/* RZ/G3S Clock status configuration. */ >> +#define G3S_DIVPL1A_STS DDIV_PACK(CPG_CLKSTATUS, 0, 1) >> +#define G3S_DIVPL2B_STS DDIV_PACK(CPG_CLKSTATUS, 5, 1) >> +#define G3S_DIVPL3A_STS DDIV_PACK(CPG_CLKSTATUS, 8, 1) >> +#define G3S_DIVPL3B_STS DDIV_PACK(CPG_CLKSTATUS, 9, 1) >> +#define G3S_DIVPL3C_STS DDIV_PACK(CPG_CLKSTATUS, 10, 1) >> +#define G3S_DIV_SDHI0_STS DDIV_PACK(CPG_CLKSTATUS, 24, 1) > > The register at offset 0x280 is called CPG_CLKDIVSTATUS, so > you probably want to add and use a G3S-specific definition. I just used the already definition as there is no conflict at the moment, it points to the same offset and is almost identical in name. With this would you still prefer to have it separately ? > >> +#define G3S_SEL_PLL4_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 6, 1) >> +#define G3S_SEL_SDHI0_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 16, 1) >> + >> +/* RZ/G3S Specific clocks select. */ >> +#define G3S_SEL_PLL4 SEL_PLL_PACK(G3S_CPG_PLL_DSEL, 6, 1) >> +#define G3S_SEL_SDHI0 SEL_PLL_PACK(G3S_CPG_SDHI_DSEL, 0, 2) >> + >> +/* PLL 1/4/6 configuration registers macro. */ >> +#define G3S_PLL146_CONF(clk1, clk2) ((clk1) << 22 | (clk2) << 12) >> + >> +#define DEF_G3S_MUX(_name, _id, _conf, _parent_names, _mux_flags, _clk_flags) \ >> + DEF_TYPE(_name, _id, CLK_TYPE_MUX, .conf = (_conf), \ >> + .parent_names = (_parent_names), \ >> + .num_parents = ARRAY_SIZE((_parent_names)), \ >> + .mux_flags = CLK_MUX_HIWORD_MASK | (_mux_flags), \ >> + .flag = (_clk_flags)) >> + >> +enum clk_ids { >> + /* Core Clock Outputs exported to DT */ >> + LAST_DT_CORE_CLK = R9A08G045_SWD, >> + >> + /* External Input Clocks */ >> + CLK_EXTAL, >> + >> + /* Internal Core Clocks */ >> + CLK_OSC_DIV1000, >> + CLK_PLL1, >> + CLK_PLL2, >> + CLK_PLL2_DIV2, >> + CLK_PLL2_DIV2_8, >> + CLK_PLL2_DIV6, >> + CLK_PLL3, >> + CLK_PLL3_DIV2, >> + CLK_PLL3_DIV2_2, > > Do you need CLK_PLL3_DIV2_2? > When adding support for R9A07G043_CLK_AT later, you can define it > as CLK_PLL3_DIV2 / 2. That's true. I kept it here as I saw it as a core clock. I can remove it. > >> + CLK_PLL3_DIV2_4, >> + CLK_PLL3_DIV2_8, >> + CLK_PLL3_DIV6, >> + CLK_PLL4, >> + CLK_PLL6, >> + CLK_PLL6_DIV2, >> + CLK_SEL_SDHI0, >> + CLK_SEL_PLL4, >> + CLK_P1_DIV2, >> + CLK_P3_DIV2, > > Do you need CLK_P1_DIV2 and CLK_P3_DIV2? > I don't see them in Figure 7.3 ("Clock System Diagram (2)"). > >> + CLK_SD0_DIV, > > CLK_SD0_DIV is unused. Ok, I'll remove it. > >> + CLK_SD0_DIV4, >> + CLK_S0_DIV2, > > CLK_S0_DIV2 is unused. ok. > >> + >> + /* Module Clocks */ >> + MOD_CLK_BASE, >> +}; >> + >> +/* Divider tables */ >> +static const struct clk_div_table dtable_1_2[] = { >> + {0, 1}, > > "{ 0, 1 }," etc... ok. > >> + {1, 2}, >> + {0, 0}, >> +}; >> + >> +static const struct clk_div_table dtable_1_8[] = { >> + {0, 1}, >> + {1, 2}, >> + {2, 4}, >> + {3, 8}, >> + {0, 0}, >> +}; >> + >> +static const struct clk_div_table dtable_1_32[] = { >> + {0, 1}, >> + {1, 2}, >> + {2, 4}, >> + {3, 8}, >> + {4, 32}, >> + {0, 0}, >> +}; >> + >> +/* Mux clock names tables. */ >> +static const char * const sel_sdhi[] = { ".pll2_div2", ".pll6", ".pll2_div6" }; >> +static const char * const sel_pll4[] = { ".osc_div1000", ".pll4" }; >> + >> +/* Mux clock indexes tables. */ > > indices > >> +static const u32 mtable_sd[] = { 0, 2, 3 }; >> +static const u32 mtable_pll4[] = { 0, 1 }; >> + >> +static const struct cpg_core_clk r9a08g045_core_clks[] __initconst = { >> + /* External Clock Inputs */ >> + DEF_INPUT("extal", CLK_EXTAL), >> + >> + /* Internal Core Clocks */ >> + DEF_FIXED(".osc", R9A08G045_OSCCLK, CLK_EXTAL, 1, 1), > > "OSC", as this is not an internal core clock. ok, I wasn't aware of this convention. > >> + DEF_FIXED(".osc2", R9A08G045_OSCCLK2, CLK_EXTAL, 1, 3), > > "OSC2" ok. > >> + DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000), >> + DEF_G3S_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, G3S_PLL146_CONF(0x4, 0x8)), >> + DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3), >> + DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3), >> + DEF_FIXED(".pll4", CLK_PLL4, CLK_EXTAL, 100, 3), >> + DEF_FIXED(".pll6", CLK_PLL6, CLK_EXTAL, 125, 6), >> + DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2), >> + DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8), >> + DEF_FIXED(".pll2_div6", CLK_PLL2_DIV6, CLK_PLL2, 1, 6), >> + DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2), >> + DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2), >> + DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4), >> + DEF_FIXED(".pll3_div2_8", CLK_PLL3_DIV2_8, CLK_PLL3_DIV2, 1, 8), >> + DEF_FIXED(".pll3_div6", CLK_PLL3_DIV6, CLK_PLL3, 1, 6), >> + DEF_FIXED(".pll6_div2", CLK_PLL6_DIV2, CLK_PLL6, 1, 2), >> + DEF_SD_MUX(".sel_sd0", CLK_SEL_SDHI0, G3S_SEL_SDHI0, G3S_SEL_SDHI0_STS, sel_sdhi, >> + mtable_sd, 0, NULL), >> + DEF_SD_MUX(".sel_pll4", CLK_SEL_PLL4, G3S_SEL_PLL4, G3S_SEL_PLL4_STS, sel_pll4, >> + mtable_pll4, CLK_SET_PARENT_GATE, NULL), >> + >> + /* Core output clk */ >> + DEF_G3S_DIV("I", R9A08G045_CLK_I, CLK_PLL1, DIVPL1A, G3S_DIVPL1A_STS, dtable_1_8, >> + 0, 0, NULL), >> + DEF_G3S_DIV("P0", R9A08G045_CLK_P0, CLK_PLL2_DIV2_8, G3S_DIVPL2B, G3S_DIVPL2B_STS, >> + dtable_1_32, 0, 0, NULL), >> + DEF_G3S_DIV("SD0", R9A08G045_CLK_SD0, CLK_SEL_SDHI0, G3S_DIV_SDHI0, G3S_DIV_SDHI0_STS, >> + dtable_1_2, 800000000UL, CLK_SET_RATE_PARENT, DIV_NOTIF), >> + DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A08G045_CLK_SD0, 1, 4), > > ".sd0_div4", as this is not a public core clock. ok. > >> + DEF_FIXED("M0", R9A08G045_CLK_M0, CLK_PLL3_DIV2_4, 1, 1), >> + DEF_G3S_DIV("P1", R9A08G045_CLK_P1, CLK_PLL3_DIV2_4, DIVPL3A, G3S_DIVPL3A_STS, >> + dtable_1_32, 0, 0, NULL), >> + DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A08G045_CLK_P1, 1, 2), >> + DEF_G3S_DIV("P2", R9A08G045_CLK_P2, CLK_PLL3_DIV2_8, DIVPL3B, G3S_DIVPL3B_STS, >> + dtable_1_32, 0, 0, NULL), >> + DEF_G3S_DIV("P3", R9A08G045_CLK_P3, CLK_PLL3_DIV2_4, DIVPL3C, G3S_DIVPL3C_STS, >> + dtable_1_32, 0, 0, NULL), >> + DEF_FIXED("P3_DIV2", CLK_P3_DIV2, R9A08G045_CLK_P3, 1, 2), >> + DEF_FIXED("S0", R9A08G045_CLK_S0, CLK_SEL_PLL4, 1, 2), >> + DEF_FIXED("S0_DIV2", CLK_S0_DIV2, R9A08G045_CLK_S0, 1, 2), >> +}; > > Gr{oetje,eeting}s, > > Geert >
Hi Claudiu, On Mon, Sep 18, 2023 at 8:20 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote: > On 15.09.2023 15:52, Geert Uytterhoeven wrote: > > On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: > >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >> > >> Add minimal clock and reset support for RZ/G3S SoC to be able to boot > >> Linux from SD Card/eMMC. This includes necessary core clocks for booting > >> and GIC, SCIF, GPIO, SD0 mod clocks and resets. > >> > >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > > > Thanks for your patch! > > > >> --- /dev/null > >> +++ b/drivers/clk/renesas/r9a08g045-cpg.c > >> @@ -0,0 +1,217 @@ > >> +// SPDX-License-Identifier: GPL-2.0 > >> +/* > >> + * RZ/G3S CPG driver > >> + * > >> + * Copyright (C) 2023 Renesas Electronics Corp. > >> + */ > >> + > >> +#include <linux/clk-provider.h> > >> +#include <linux/device.h> > >> +#include <linux/init.h> > >> +#include <linux/kernel.h> > >> + > >> +#include <dt-bindings/clock/r9a08g045-cpg.h> > >> + > >> +#include "rzg2l-cpg.h" > >> + > >> +/* RZ/G3S Specific registers. */ > >> +#define G3S_CPG_PL2_DDIV (0x204) > >> +#define G3S_CPG_SDHI_DDIV (0x218) > >> +#define G3S_CPG_PLL_DSEL (0x240) > >> +#define G3S_CPG_SDHI_DSEL (0x244) > >> +#define G3S_CLKSELSTATUS (0x284) > >> + > >> +/* RZ/G3S Specific division configuration. */ > >> +#define G3S_DIVPL2B DDIV_PACK(G3S_CPG_PL2_DDIV, 4, 3) > >> +#define G3S_DIV_SDHI0 DDIV_PACK(G3S_CPG_SDHI_DDIV, 0, 1) > >> + > >> +/* RZ/G3S Clock status configuration. */ > >> +#define G3S_DIVPL1A_STS DDIV_PACK(CPG_CLKSTATUS, 0, 1) > >> +#define G3S_DIVPL2B_STS DDIV_PACK(CPG_CLKSTATUS, 5, 1) > >> +#define G3S_DIVPL3A_STS DDIV_PACK(CPG_CLKSTATUS, 8, 1) > >> +#define G3S_DIVPL3B_STS DDIV_PACK(CPG_CLKSTATUS, 9, 1) > >> +#define G3S_DIVPL3C_STS DDIV_PACK(CPG_CLKSTATUS, 10, 1) > >> +#define G3S_DIV_SDHI0_STS DDIV_PACK(CPG_CLKSTATUS, 24, 1) > > > > The register at offset 0x280 is called CPG_CLKDIVSTATUS, so > > you probably want to add and use a G3S-specific definition. > > I just used the already definition as there is no conflict at the moment, > it points to the same offset and is almost identical in name. With this > would you still prefer to have it separately ? I think that would be clearer for the casual reader. On RZ/G2L, there is a single CPG_CLKSTATUS register to monitor frequency dividers and selectors. On RZ/G3S, this register was split into separate registers to monitor frequency dividers (CPG_CLKDIVSTATUS) and selectors (CPG_CLKSELSTATUS). You had to add a new definition for the latter anyway. Gr{oetje,eeting}s, Geert
Hi, Geert, On 15.09.2023 15:52, Geert Uytterhoeven wrote: > Hi Claudiu, > > On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> >> >> Add minimal clock and reset support for RZ/G3S SoC to be able to boot >> Linux from SD Card/eMMC. This includes necessary core clocks for booting >> and GIC, SCIF, GPIO, SD0 mod clocks and resets. >> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > Thanks for your patch! > [ ... ] >> + CLK_PLL3_DIV2_4, >> + CLK_PLL3_DIV2_8, >> + CLK_PLL3_DIV6, >> + CLK_PLL4, >> + CLK_PLL6, >> + CLK_PLL6_DIV2, >> + CLK_SEL_SDHI0, >> + CLK_SEL_PLL4, >> + CLK_P1_DIV2, >> + CLK_P3_DIV2, > > Do you need CLK_P1_DIV2 and CLK_P3_DIV2? > I don't see them in Figure 7.3 ("Clock System Diagram (2)"). > P1_DIV2 is clock source for MHU_PCLK or OTFDE_DDR_PCLK. P3_DIV2 is clock source for DMAC_PCLK, OTFDE_SPI_PCLK. These are expressed in clock list document (RZG3S_clock_list_r1.00_20230602.xlsx). It is true the functionality could be preserved even w/o these 2 clocks but I kept them here as I saw them as core clocks even though they are not present in the Clock System Diagram from HW manual. With these, would you prefer to keep these clocks or just remove them? Thank you, Claudiu Beznea
Hi Claudiu, On Mon, Sep 18, 2023 at 9:50 AM claudiu beznea <claudiu.beznea@tuxon.dev> wrote: > On 15.09.2023 15:52, Geert Uytterhoeven wrote: > > On Tue, Sep 12, 2023 at 6:53 AM Claudiu <claudiu.beznea@tuxon.dev> wrote: > >> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > >> > >> Add minimal clock and reset support for RZ/G3S SoC to be able to boot > >> Linux from SD Card/eMMC. This includes necessary core clocks for booting > >> and GIC, SCIF, GPIO, SD0 mod clocks and resets. > >> > >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> > > > > Thanks for your patch! > > > > [ ... ] > > >> + CLK_PLL3_DIV2_4, > >> + CLK_PLL3_DIV2_8, > >> + CLK_PLL3_DIV6, > >> + CLK_PLL4, > >> + CLK_PLL6, > >> + CLK_PLL6_DIV2, > >> + CLK_SEL_SDHI0, > >> + CLK_SEL_PLL4, > >> + CLK_P1_DIV2, > >> + CLK_P3_DIV2, > > > > Do you need CLK_P1_DIV2 and CLK_P3_DIV2? > > I don't see them in Figure 7.3 ("Clock System Diagram (2)"). > > P1_DIV2 is clock source for MHU_PCLK or OTFDE_DDR_PCLK. > P3_DIV2 is clock source for DMAC_PCLK, OTFDE_SPI_PCLK. > These are expressed in clock list document > (RZG3S_clock_list_r1.00_20230602.xlsx). > > It is true the functionality could be preserved even w/o these 2 clocks but > I kept them here as I saw them as core clocks even though they are not > present in the Clock System Diagram from HW manual. I don't think you can, as the module clock abstraction does not support specifying a divider. Hence you do need an internal core clock between P1 and the module clock, to take care of the divider. > With these, would you prefer to keep these clocks or just remove them? Yes, as I expect that at least the DMAC_PCLK will be added, eventually. Gr{oetje,eeting}s, Geert
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 37632a0659d8..69396e197959 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -37,6 +37,7 @@ config CLK_RENESAS select CLK_R9A07G043 if ARCH_R9A07G043 select CLK_R9A07G044 if ARCH_R9A07G044 select CLK_R9A07G054 if ARCH_R9A07G054 + select CLK_R9A08G045 if ARCH_R9A08G045 select CLK_R9A09G011 if ARCH_R9A09G011 select CLK_SH73A0 if ARCH_SH73A0 @@ -179,6 +180,10 @@ config CLK_R9A07G054 bool "RZ/V2L clock support" if COMPILE_TEST select CLK_RZG2L +config CLK_R9A08G045 + bool "RZ/G3S clock support" if COMPILE_TEST + select CLK_RZG2L + config CLK_R9A09G011 bool "RZ/V2M clock support" if COMPILE_TEST select CLK_RZG2L @@ -215,7 +220,7 @@ config CLK_RCAR_USB2_CLOCK_SEL This is a driver for R-Car USB2 clock selector config CLK_RZG2L - bool "Renesas RZ/{G2L,G2UL,V2L} family clock support" if COMPILE_TEST + bool "Renesas RZ/{G2L,G2UL,G3S,V2L} family clock support" if COMPILE_TEST select RESET_CONTROLLER # Generic diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index de907623fe3f..879a07d445f9 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_CLK_R9A06G032) += r9a06g032-clocks.o obj-$(CONFIG_CLK_R9A07G043) += r9a07g043-cpg.o obj-$(CONFIG_CLK_R9A07G044) += r9a07g044-cpg.o obj-$(CONFIG_CLK_R9A07G054) += r9a07g044-cpg.o +obj-$(CONFIG_CLK_R9A08G045) += r9a08g045-cpg.o obj-$(CONFIG_CLK_R9A09G011) += r9a09g011-cpg.o obj-$(CONFIG_CLK_SH73A0) += clk-sh73a0.o diff --git a/drivers/clk/renesas/r9a08g045-cpg.c b/drivers/clk/renesas/r9a08g045-cpg.c new file mode 100644 index 000000000000..ff0718a03c74 --- /dev/null +++ b/drivers/clk/renesas/r9a08g045-cpg.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RZ/G3S CPG driver + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +#include <linux/clk-provider.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <dt-bindings/clock/r9a08g045-cpg.h> + +#include "rzg2l-cpg.h" + +/* RZ/G3S Specific registers. */ +#define G3S_CPG_PL2_DDIV (0x204) +#define G3S_CPG_SDHI_DDIV (0x218) +#define G3S_CPG_PLL_DSEL (0x240) +#define G3S_CPG_SDHI_DSEL (0x244) +#define G3S_CLKSELSTATUS (0x284) + +/* RZ/G3S Specific division configuration. */ +#define G3S_DIVPL2B DDIV_PACK(G3S_CPG_PL2_DDIV, 4, 3) +#define G3S_DIV_SDHI0 DDIV_PACK(G3S_CPG_SDHI_DDIV, 0, 1) + +/* RZ/G3S Clock status configuration. */ +#define G3S_DIVPL1A_STS DDIV_PACK(CPG_CLKSTATUS, 0, 1) +#define G3S_DIVPL2B_STS DDIV_PACK(CPG_CLKSTATUS, 5, 1) +#define G3S_DIVPL3A_STS DDIV_PACK(CPG_CLKSTATUS, 8, 1) +#define G3S_DIVPL3B_STS DDIV_PACK(CPG_CLKSTATUS, 9, 1) +#define G3S_DIVPL3C_STS DDIV_PACK(CPG_CLKSTATUS, 10, 1) +#define G3S_DIV_SDHI0_STS DDIV_PACK(CPG_CLKSTATUS, 24, 1) + +#define G3S_SEL_PLL4_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 6, 1) +#define G3S_SEL_SDHI0_STS SEL_PLL_PACK(G3S_CLKSELSTATUS, 16, 1) + +/* RZ/G3S Specific clocks select. */ +#define G3S_SEL_PLL4 SEL_PLL_PACK(G3S_CPG_PLL_DSEL, 6, 1) +#define G3S_SEL_SDHI0 SEL_PLL_PACK(G3S_CPG_SDHI_DSEL, 0, 2) + +/* PLL 1/4/6 configuration registers macro. */ +#define G3S_PLL146_CONF(clk1, clk2) ((clk1) << 22 | (clk2) << 12) + +#define DEF_G3S_MUX(_name, _id, _conf, _parent_names, _mux_flags, _clk_flags) \ + DEF_TYPE(_name, _id, CLK_TYPE_MUX, .conf = (_conf), \ + .parent_names = (_parent_names), \ + .num_parents = ARRAY_SIZE((_parent_names)), \ + .mux_flags = CLK_MUX_HIWORD_MASK | (_mux_flags), \ + .flag = (_clk_flags)) + +enum clk_ids { + /* Core Clock Outputs exported to DT */ + LAST_DT_CORE_CLK = R9A08G045_SWD, + + /* External Input Clocks */ + CLK_EXTAL, + + /* Internal Core Clocks */ + CLK_OSC_DIV1000, + CLK_PLL1, + CLK_PLL2, + CLK_PLL2_DIV2, + CLK_PLL2_DIV2_8, + CLK_PLL2_DIV6, + CLK_PLL3, + CLK_PLL3_DIV2, + CLK_PLL3_DIV2_2, + CLK_PLL3_DIV2_4, + CLK_PLL3_DIV2_8, + CLK_PLL3_DIV6, + CLK_PLL4, + CLK_PLL6, + CLK_PLL6_DIV2, + CLK_SEL_SDHI0, + CLK_SEL_PLL4, + CLK_P1_DIV2, + CLK_P3_DIV2, + CLK_SD0_DIV, + CLK_SD0_DIV4, + CLK_S0_DIV2, + + /* Module Clocks */ + MOD_CLK_BASE, +}; + +/* Divider tables */ +static const struct clk_div_table dtable_1_2[] = { + {0, 1}, + {1, 2}, + {0, 0}, +}; + +static const struct clk_div_table dtable_1_8[] = { + {0, 1}, + {1, 2}, + {2, 4}, + {3, 8}, + {0, 0}, +}; + +static const struct clk_div_table dtable_1_32[] = { + {0, 1}, + {1, 2}, + {2, 4}, + {3, 8}, + {4, 32}, + {0, 0}, +}; + +/* Mux clock names tables. */ +static const char * const sel_sdhi[] = { ".pll2_div2", ".pll6", ".pll2_div6" }; +static const char * const sel_pll4[] = { ".osc_div1000", ".pll4" }; + +/* Mux clock indexes tables. */ +static const u32 mtable_sd[] = { 0, 2, 3 }; +static const u32 mtable_pll4[] = { 0, 1 }; + +static const struct cpg_core_clk r9a08g045_core_clks[] __initconst = { + /* External Clock Inputs */ + DEF_INPUT("extal", CLK_EXTAL), + + /* Internal Core Clocks */ + DEF_FIXED(".osc", R9A08G045_OSCCLK, CLK_EXTAL, 1, 1), + DEF_FIXED(".osc2", R9A08G045_OSCCLK2, CLK_EXTAL, 1, 3), + DEF_FIXED(".osc_div1000", CLK_OSC_DIV1000, CLK_EXTAL, 1, 1000), + DEF_G3S_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, G3S_PLL146_CONF(0x4, 0x8)), + DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 200, 3), + DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 200, 3), + DEF_FIXED(".pll4", CLK_PLL4, CLK_EXTAL, 100, 3), + DEF_FIXED(".pll6", CLK_PLL6, CLK_EXTAL, 125, 6), + DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 1, 2), + DEF_FIXED(".pll2_div2_8", CLK_PLL2_DIV2_8, CLK_PLL2_DIV2, 1, 8), + DEF_FIXED(".pll2_div6", CLK_PLL2_DIV6, CLK_PLL2, 1, 6), + DEF_FIXED(".pll3_div2", CLK_PLL3_DIV2, CLK_PLL3, 1, 2), + DEF_FIXED(".pll3_div2_2", CLK_PLL3_DIV2_2, CLK_PLL3_DIV2, 1, 2), + DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4), + DEF_FIXED(".pll3_div2_8", CLK_PLL3_DIV2_8, CLK_PLL3_DIV2, 1, 8), + DEF_FIXED(".pll3_div6", CLK_PLL3_DIV6, CLK_PLL3, 1, 6), + DEF_FIXED(".pll6_div2", CLK_PLL6_DIV2, CLK_PLL6, 1, 2), + DEF_SD_MUX(".sel_sd0", CLK_SEL_SDHI0, G3S_SEL_SDHI0, G3S_SEL_SDHI0_STS, sel_sdhi, + mtable_sd, 0, NULL), + DEF_SD_MUX(".sel_pll4", CLK_SEL_PLL4, G3S_SEL_PLL4, G3S_SEL_PLL4_STS, sel_pll4, + mtable_pll4, CLK_SET_PARENT_GATE, NULL), + + /* Core output clk */ + DEF_G3S_DIV("I", R9A08G045_CLK_I, CLK_PLL1, DIVPL1A, G3S_DIVPL1A_STS, dtable_1_8, + 0, 0, NULL), + DEF_G3S_DIV("P0", R9A08G045_CLK_P0, CLK_PLL2_DIV2_8, G3S_DIVPL2B, G3S_DIVPL2B_STS, + dtable_1_32, 0, 0, NULL), + DEF_G3S_DIV("SD0", R9A08G045_CLK_SD0, CLK_SEL_SDHI0, G3S_DIV_SDHI0, G3S_DIV_SDHI0_STS, + dtable_1_2, 800000000UL, CLK_SET_RATE_PARENT, DIV_NOTIF), + DEF_FIXED("SD0_DIV4", CLK_SD0_DIV4, R9A08G045_CLK_SD0, 1, 4), + DEF_FIXED("M0", R9A08G045_CLK_M0, CLK_PLL3_DIV2_4, 1, 1), + DEF_G3S_DIV("P1", R9A08G045_CLK_P1, CLK_PLL3_DIV2_4, DIVPL3A, G3S_DIVPL3A_STS, + dtable_1_32, 0, 0, NULL), + DEF_FIXED("P1_DIV2", CLK_P1_DIV2, R9A08G045_CLK_P1, 1, 2), + DEF_G3S_DIV("P2", R9A08G045_CLK_P2, CLK_PLL3_DIV2_8, DIVPL3B, G3S_DIVPL3B_STS, + dtable_1_32, 0, 0, NULL), + DEF_G3S_DIV("P3", R9A08G045_CLK_P3, CLK_PLL3_DIV2_4, DIVPL3C, G3S_DIVPL3C_STS, + dtable_1_32, 0, 0, NULL), + DEF_FIXED("P3_DIV2", CLK_P3_DIV2, R9A08G045_CLK_P3, 1, 2), + DEF_FIXED("S0", R9A08G045_CLK_S0, CLK_SEL_PLL4, 1, 2), + DEF_FIXED("S0_DIV2", CLK_S0_DIV2, R9A08G045_CLK_S0, 1, 2), +}; + +static const struct rzg2l_mod_clk r9a08g045_mod_clks[] = { + DEF_MOD("gic_gicclk", R9A08G045_GIC600_GICCLK, R9A08G045_CLK_P1, 0x514, 0), + DEF_MOD("ia55_clk", R9A08G045_IA55_CLK, R9A08G045_CLK_P1, 0x518, 1), + DEF_MOD("dmac_aclk", R9A08G045_DMAC_ACLK, R9A08G045_CLK_P3, 0x52c, 0), + DEF_MOD("sdhi0_imclk", R9A08G045_SDHI0_IMCLK, CLK_SD0_DIV4, 0x554, 0), + DEF_MOD("sdhi0_imclk2", R9A08G045_SDHI0_IMCLK2, CLK_SD0_DIV4, 0x554, 1), + DEF_MOD("sdhi0_clk_hs", R9A08G045_SDHI0_CLK_HS, R9A08G045_CLK_SD0, 0x554, 2), + DEF_MOD("sdhi0_aclk", R9A08G045_SDHI0_ACLK, R9A08G045_CLK_P1, 0x554, 3), + DEF_MOD("scif0_clk_pck", R9A08G045_SCIF0_CLK_PCK, R9A08G045_CLK_P0, 0x584, 0), + DEF_MOD("gpio_hclk", R9A08G045_GPIO_HCLK, R9A08G045_OSCCLK, 0x598, 0), +}; + +static const struct rzg2l_reset r9a08g045_resets[] = { + DEF_RST(R9A08G045_GIC600_GICRESET_N, 0x814, 0), + DEF_RST(R9A08G045_GIC600_DBG_GICRESET_N, 0x814, 1), + DEF_RST(R9A08G045_SDHI0_IXRST, 0x854, 0), + DEF_RST(R9A08G045_SCIF0_RST_SYSTEM_N, 0x884, 0), + DEF_RST(R9A08G045_GPIO_RSTN, 0x898, 0), + DEF_RST(R9A08G045_GPIO_PORT_RESETN, 0x898, 1), + DEF_RST(R9A08G045_GPIO_SPARE_RESETN, 0x898, 2), +}; + +static const unsigned int r9a08g045_crit_mod_clks[] __initconst = { + MOD_CLK_BASE + R9A08G045_GIC600_GICCLK, + MOD_CLK_BASE + R9A08G045_IA55_CLK, + MOD_CLK_BASE + R9A08G045_DMAC_ACLK, +}; + +const struct rzg2l_cpg_info r9a08g045_cpg_info = { + /* Core Clocks */ + .core_clks = r9a08g045_core_clks, + .num_core_clks = ARRAY_SIZE(r9a08g045_core_clks), + .last_dt_core_clk = LAST_DT_CORE_CLK, + .num_total_core_clks = MOD_CLK_BASE, + + /* Critical Module Clocks */ + .crit_mod_clks = r9a08g045_crit_mod_clks, + .num_crit_mod_clks = ARRAY_SIZE(r9a08g045_crit_mod_clks), + + /* Module Clocks */ + .mod_clks = r9a08g045_mod_clks, + .num_mod_clks = ARRAY_SIZE(r9a08g045_mod_clks), + .num_hw_mod_clks = R9A08G045_VBAT_BCLK + 1, + + /* Resets */ + .resets = r9a08g045_resets, + .num_resets = R9A08G045_VBAT_BRESETN + 1, /* Last reset ID + 1 */ + + .has_clk_mon_regs = true, +}; diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c index c8a8833650ee..41c9b5ce23e9 100644 --- a/drivers/clk/renesas/rzg2l-cpg.c +++ b/drivers/clk/renesas/rzg2l-cpg.c @@ -1730,6 +1730,12 @@ static const struct of_device_id rzg2l_cpg_match[] = { .data = &r9a07g054_cpg_info, }, #endif +#ifdef CONFIG_CLK_R9A08G045 + { + .compatible = "renesas,r9a08g045-cpg", + .data = &r9a08g045_cpg_info, + }, +#endif #ifdef CONFIG_CLK_R9A09G011 { .compatible = "renesas,r9a09g011-cpg", diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h index 164da1dd7212..a97edcdd96fa 100644 --- a/drivers/clk/renesas/rzg2l-cpg.h +++ b/drivers/clk/renesas/rzg2l-cpg.h @@ -284,6 +284,7 @@ struct rzg2l_cpg_info { extern const struct rzg2l_cpg_info r9a07g043_cpg_info; extern const struct rzg2l_cpg_info r9a07g044_cpg_info; extern const struct rzg2l_cpg_info r9a07g054_cpg_info; +extern const struct rzg2l_cpg_info r9a08g045_cpg_info; extern const struct rzg2l_cpg_info r9a09g011_cpg_info; int rzg2l_cpg_sd_mux_clk_notifier(struct notifier_block *nb, unsigned long event, void *data);