diff mbox

[2.6.29-rc7-omap] omap3 boards list voltage ranges for VMMC1, VMMC2, VSIM

Message ID 200903081244.39744.david-b@pacbell.net (mailing list archive)
State Accepted
Commit ccd1de46c33fddc044d957a723379acf6d66ebc0
Headers show

Commit Message

David Brownell March 8, 2009, 7:44 p.m. UTC 
From: David Brownell <dbrownell@users.sourceforge.net>

It seems the regulator framework is going to require boards
to explicitly configure voltage ranges, instead of letting
them just pick up the entire available range.  So this patch
updates OMAP3 board handling for VMMC1, VMMC2, and VSIM.

Also, change the label for the MMC1 DAT4..DAT7 supply to
"vmmc_aux", so the label isn't specific to MMC1.  Things
like SDIO and eMMC chips may also need a second voltage,
though in that case it's usually 1.8V for chip interface.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
This should go with the patches headed to mainline too.

 arch/arm/mach-omap2/board-3430sdp.c     |   26 +++++++++++++++-----------
 arch/arm/mach-omap2/board-omap3beagle.c |   26 +++++++++++++++-----------
 arch/arm/mach-omap2/board-overo.c       |   12 +++++++-----
 3 files changed, 37 insertions(+), 27 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Tony Lindgren March 9, 2009, 5:31 p.m. UTC | #1 
This patch has been applied to the linux-omap
by youw fwiendly patch wobot.

Commit: ccd1de46c33fddc044d957a723379acf6d66ebc0

PatchWorks
http://patchwork.kernel.org/patch/10565/

Git
http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=ccd1de46c33fddc044d957a723379acf6d66ebc0


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -335,7 +335,7 @@  static struct regulator_consumer_supply 
 };
 
 static struct regulator_consumer_supply sdp3430_vsim_supply = {
-	.supply			= "vmmc_dat4..7",
+	.supply			= "vmmc_aux",
 };
 
 static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
@@ -528,11 +528,13 @@  static struct regulator_init_data sdp343
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data sdp3430_vmmc1 = {
 	.constraints = {
-		.valid_modes_mask = REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
-				| REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
 	.consumer_supplies	= &sdp3430_vmmc1_supply,
@@ -556,11 +558,13 @@  static struct regulator_init_data sdp343
 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
 static struct regulator_init_data sdp3430_vsim = {
 	.constraints = {
-		.valid_modes_mask = REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
-				| REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
 	.consumer_supplies	= &sdp3430_vsim_supply,
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -131,7 +131,7 @@  static struct regulator_consumer_supply 
 };
 
 static struct regulator_consumer_supply beagle_vsim_supply = {
-	.supply			= "vmmc_dat4..7",
+	.supply			= "vmmc_aux",
 };
 
 static struct gpio_led gpio_leds[];
@@ -179,11 +179,13 @@  static struct twl4030_gpio_platform_data
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data beagle_vmmc1 = {
 	.constraints = {
-		.valid_modes_mask = REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
-				| REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
 	.consumer_supplies	= &beagle_vmmc1_supply,
@@ -192,11 +194,13 @@  static struct regulator_init_data beagle
 /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
 static struct regulator_init_data beagle_vsim = {
 	.constraints = {
-		.valid_modes_mask = REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
-				| REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
 	.consumer_supplies	= &beagle_vsim_supply,
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -279,11 +279,13 @@  static struct twl4030_usb_data overo_usb
 
 static struct regulator_init_data overo_vmmc1 = {
 	.constraints = {
-		.valid_modes_mask = REGULATOR_MODE_NORMAL
-				| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
-				| REGULATOR_CHANGE_MODE
-				| REGULATOR_CHANGE_STATUS,
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
 	},
 };