| Message ID | 20230914003154.27977-1-michael@allwinnertech.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb:typec:tcpm:support double Rp to Vbus cable as sink | expand |
On Thu, Sep 14, 2023 at 08:31:54AM +0800, Michael Wu wrote: > The USB Type-C Cable and Connector Specification defines the wire > connections for the USB Type-C to USB 2.0 Standard-A cable assembly > (Release 2.2, Chapter 3.5.2). > The Notes says that Pin A5 (CC) of the USB Type-C plug shall be connected > to Vbus through a resister Rp. > However, there is a large amount of such double Rp connected to Vbus > non-standard cables which produced by UGREEN circulating on the market, and > it can affects the normal operations of the state machine easily, > especially to CC1 and CC2 be pulled up at the same time. > In fact, we can regard those cables as sink to avoid abnormal state. > > Message as follow: > [ 58.900212] VBUS on > [ 59.265433] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected] > [ 62.623308] CC1: 3 -> 0, CC2: 3 -> 0 [state TOGGLING, polarity 0, disconnected] > [ 62.625006] VBUS off > [ 62.625012] VBUS VSAFE0V > > Signed-off-by: Michael Wu <michael@allwinnertech.com> > --- > drivers/usb/typec/tcpm/tcpm.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > index d962f67c95ae6..beb7143128667 100644 > --- a/drivers/usb/typec/tcpm/tcpm.c > +++ b/drivers/usb/typec/tcpm/tcpm.c > @@ -519,7 +519,8 @@ static const char * const pd_rev[] = { > > #define tcpm_port_is_sink(port) \ > ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ > - (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) > + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) || \ > + (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2))) > > #define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) > #define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) This look OK to me, but I would still like to wait for comments from Guenter - just in case. thanks,
On 9/18/23 03:31, Heikki Krogerus wrote: > On Thu, Sep 14, 2023 at 08:31:54AM +0800, Michael Wu wrote: >> The USB Type-C Cable and Connector Specification defines the wire >> connections for the USB Type-C to USB 2.0 Standard-A cable assembly >> (Release 2.2, Chapter 3.5.2). >> The Notes says that Pin A5 (CC) of the USB Type-C plug shall be connected >> to Vbus through a resister Rp. >> However, there is a large amount of such double Rp connected to Vbus >> non-standard cables which produced by UGREEN circulating on the market, and >> it can affects the normal operations of the state machine easily, >> especially to CC1 and CC2 be pulled up at the same time. >> In fact, we can regard those cables as sink to avoid abnormal state. >> >> Message as follow: >> [ 58.900212] VBUS on >> [ 59.265433] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected] >> [ 62.623308] CC1: 3 -> 0, CC2: 3 -> 0 [state TOGGLING, polarity 0, disconnected] >> [ 62.625006] VBUS off >> [ 62.625012] VBUS VSAFE0V >> >> Signed-off-by: Michael Wu <michael@allwinnertech.com> >> --- >> drivers/usb/typec/tcpm/tcpm.c | 3 ++- >> 1 file changed, 2 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c >> index d962f67c95ae6..beb7143128667 100644 >> --- a/drivers/usb/typec/tcpm/tcpm.c >> +++ b/drivers/usb/typec/tcpm/tcpm.c >> @@ -519,7 +519,8 @@ static const char * const pd_rev[] = { >> >> #define tcpm_port_is_sink(port) \ >> ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ >> - (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) >> + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) || \ >> + (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2))) >> >> #define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) >> #define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) > > This look OK to me, but I would still like to wait for comments from > Guenter - just in case. > Look at the conditions. Reordered, we end up with (tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2)) which simplifies to tcpm_cc_is_sink((port)->cc1) making the complete expression tcpm_cc_is_sink((port)->cc1) || (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) which simplifies further to tcpm_cc_is_sink((port)->cc1) || tcpm_cc_is_sink((port)->cc2) The simplified expression doesn't conflict with other detections, so I am ok with it. It might be worthwhile adding a comment to the code, though, explaining the reason. Guenter > thanks, >
On 2023/9/18 22:22, Guenter Roeck wrote: > On 9/18/23 03:31, Heikki Krogerus wrote: >> On Thu, Sep 14, 2023 at 08:31:54AM +0800, Michael Wu wrote: >>> The USB Type-C Cable and Connector Specification defines the wire >>> connections for the USB Type-C to USB 2.0 Standard-A cable assembly >>> (Release 2.2, Chapter 3.5.2). >>> The Notes says that Pin A5 (CC) of the USB Type-C plug shall be >>> connected >>> to Vbus through a resister Rp. >>> However, there is a large amount of such double Rp connected to Vbus >>> non-standard cables which produced by UGREEN circulating on the >>> market, and >>> it can affects the normal operations of the state machine easily, >>> especially to CC1 and CC2 be pulled up at the same time. >>> In fact, we can regard those cables as sink to avoid abnormal state. >>> >>> Message as follow: >>> [ 58.900212] VBUS on >>> [ 59.265433] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, >>> connected] >>> [ 62.623308] CC1: 3 -> 0, CC2: 3 -> 0 [state TOGGLING, polarity 0, >>> disconnected] >>> [ 62.625006] VBUS off >>> [ 62.625012] VBUS VSAFE0V >>> >>> Signed-off-by: Michael Wu <michael@allwinnertech.com> >>> --- >>> drivers/usb/typec/tcpm/tcpm.c | 3 ++- >>> 1 file changed, 2 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/usb/typec/tcpm/tcpm.c >>> b/drivers/usb/typec/tcpm/tcpm.c >>> index d962f67c95ae6..beb7143128667 100644 >>> --- a/drivers/usb/typec/tcpm/tcpm.c >>> +++ b/drivers/usb/typec/tcpm/tcpm.c >>> @@ -519,7 +519,8 @@ static const char * const pd_rev[] = { >>> #define tcpm_port_is_sink(port) \ >>> ((tcpm_cc_is_sink((port)->cc1) && >>> !tcpm_cc_is_sink((port)->cc2)) || \ >>> - (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) >>> + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) >>> || \ >>> + (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2))) >>> #define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) >>> #define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA) >> >> This look OK to me, but I would still like to wait for comments from >> Guenter - just in case. >> > > Look at the conditions. Reordered, we end up with > (tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || > (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2)) > which simplifies to > tcpm_cc_is_sink((port)->cc1) > making the complete expression > tcpm_cc_is_sink((port)->cc1) || > (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) > which simplifies further to > tcpm_cc_is_sink((port)->cc1) || tcpm_cc_is_sink((port)->cc2) > > The simplified expression doesn't conflict with other detections, so I am > ok with it. It might be worthwhile adding a comment to the code, though, > explaining the reason > Guenter > >> thanks, >> Dear Guenter, I have modified it according to your opinion, and resend it as patch v2[1]. Please review. [1] https://lore.kernel.org/all/20230920063030.66312-1-michael@allwinnertech.com/
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index d962f67c95ae6..beb7143128667 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -519,7 +519,8 @@ static const char * const pd_rev[] = { #define tcpm_port_is_sink(port) \ ((tcpm_cc_is_sink((port)->cc1) && !tcpm_cc_is_sink((port)->cc2)) || \ - (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1))) + (tcpm_cc_is_sink((port)->cc2) && !tcpm_cc_is_sink((port)->cc1)) || \ + (tcpm_cc_is_sink((port)->cc1) && tcpm_cc_is_sink((port)->cc2))) #define tcpm_cc_is_source(cc) ((cc) == TYPEC_CC_RD) #define tcpm_cc_is_audio(cc) ((cc) == TYPEC_CC_RA)
The USB Type-C Cable and Connector Specification defines the wire connections for the USB Type-C to USB 2.0 Standard-A cable assembly (Release 2.2, Chapter 3.5.2). The Notes says that Pin A5 (CC) of the USB Type-C plug shall be connected to Vbus through a resister Rp. However, there is a large amount of such double Rp connected to Vbus non-standard cables which produced by UGREEN circulating on the market, and it can affects the normal operations of the state machine easily, especially to CC1 and CC2 be pulled up at the same time. In fact, we can regard those cables as sink to avoid abnormal state. Message as follow: [ 58.900212] VBUS on [ 59.265433] CC1: 0 -> 3, CC2: 0 -> 3 [state TOGGLING, polarity 0, connected] [ 62.623308] CC1: 3 -> 0, CC2: 3 -> 0 [state TOGGLING, polarity 0, disconnected] [ 62.625006] VBUS off [ 62.625012] VBUS VSAFE0V Signed-off-by: Michael Wu <michael@allwinnertech.com> --- drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)