Message ID | 20230809095826.18183-1-zhuyinbo@loongson.cn (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] usb: xhci-plat: fix usb disconnect issue after s4 | expand |
Friendly ping ? 在 2023/8/9 下午5:58, Yinbo Zhu 写道: > The xhci retaining bogus hardware states cause usb disconnect devices > connected before hibernation(s4) and refer to the commit 'f3d478858be > ("usb: ohci-platform: fix usb disconnect issue after s4")' which set > flag "hibernated" as true when resume-from-hibernation and that the > drivers will reset the hardware to get rid of any existing state and > make sure resume from hibernation re-enumerates everything for xhci. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > Change in v2: > 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix > compile issue when CONFIG_PM not enable. > > drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++---- > 1 file changed, 20 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c > index 28218c8f1837..112468fdcca2 100644 > --- a/drivers/usb/host/xhci-plat.c > +++ b/drivers/usb/host/xhci-plat.c > @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) > return 0; > } > > -static int __maybe_unused xhci_plat_resume(struct device *dev) > +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct xhci_hcd *xhci = hcd_to_xhci(hcd); > @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) > if (ret) > return ret; > > - ret = xhci_resume(xhci, PMSG_RESUME); > + ret = xhci_resume(xhci, pmsg); > if (ret) > return ret; > > @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) > return 0; > } > > +static int __maybe_unused xhci_plat_resume(struct device *dev) > +{ > + return xhci_plat_resume_common(dev, PMSG_RESUME); > +} > + > +static int __maybe_unused xhci_plat_restore(struct device *dev) > +{ > + return xhci_plat_resume_common(dev, PMSG_RESTORE); > +} > + > static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) > } > > const struct dev_pm_ops xhci_plat_pm_ops = { > - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) > - > +#ifdef CONFIG_PM_SLEEP > + .suspend = xhci_plat_suspend, > + .resume = xhci_plat_resume, > + .freeze = xhci_plat_suspend, > + .thaw = xhci_plat_resume, > + .poweroff = xhci_plat_suspend, > + .restore = xhci_plat_restore, > +#endif > SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, > xhci_plat_runtime_resume, > NULL) >
On Tue, Aug 29, 2023 at 08:43:18PM +0800, Yinbo Zhu wrote: > > > Friendly ping ? It's the middle of the merge window, I can't take anything new until after -rc1 is out. thanks, greg k-h
Friendly ping ? 在 2023/8/9 下午5:58, Yinbo Zhu 写道: > The xhci retaining bogus hardware states cause usb disconnect devices > connected before hibernation(s4) and refer to the commit 'f3d478858be > ("usb: ohci-platform: fix usb disconnect issue after s4")' which set > flag "hibernated" as true when resume-from-hibernation and that the > drivers will reset the hardware to get rid of any existing state and > make sure resume from hibernation re-enumerates everything for xhci. > > Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> > --- > Change in v2: > 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix > compile issue when CONFIG_PM not enable. > > drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++---- > 1 file changed, 20 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c > index 28218c8f1837..112468fdcca2 100644 > --- a/drivers/usb/host/xhci-plat.c > +++ b/drivers/usb/host/xhci-plat.c > @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) > return 0; > } > > -static int __maybe_unused xhci_plat_resume(struct device *dev) > +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct xhci_hcd *xhci = hcd_to_xhci(hcd); > @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) > if (ret) > return ret; > > - ret = xhci_resume(xhci, PMSG_RESUME); > + ret = xhci_resume(xhci, pmsg); > if (ret) > return ret; > > @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) > return 0; > } > > +static int __maybe_unused xhci_plat_resume(struct device *dev) > +{ > + return xhci_plat_resume_common(dev, PMSG_RESUME); > +} > + > +static int __maybe_unused xhci_plat_restore(struct device *dev) > +{ > + return xhci_plat_resume_common(dev, PMSG_RESTORE); > +} > + > static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) > { > struct usb_hcd *hcd = dev_get_drvdata(dev); > @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) > } > > const struct dev_pm_ops xhci_plat_pm_ops = { > - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) > - > +#ifdef CONFIG_PM_SLEEP > + .suspend = xhci_plat_suspend, > + .resume = xhci_plat_resume, > + .freeze = xhci_plat_suspend, > + .thaw = xhci_plat_resume, > + .poweroff = xhci_plat_suspend, > + .restore = xhci_plat_restore, > +#endif > SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, > xhci_plat_runtime_resume, > NULL) >
On 21.9.2023 4.58, Yinbo Zhu wrote: > > > Friendly ping ? > > > 在 2023/8/9 下午5:58, Yinbo Zhu 写道: >> The xhci retaining bogus hardware states cause usb disconnect devices >> connected before hibernation(s4) and refer to the commit 'f3d478858be >> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set >> flag "hibernated" as true when resume-from-hibernation and that the >> drivers will reset the hardware to get rid of any existing state and >> make sure resume from hibernation re-enumerates everything for xhci. >> >> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> >> --- >> Change in v2: >> 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix >> compile issue when CONFIG_PM not enable. >> >> drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++---- >> 1 file changed, 20 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c >> index 28218c8f1837..112468fdcca2 100644 >> --- a/drivers/usb/host/xhci-plat.c >> +++ b/drivers/usb/host/xhci-plat.c >> @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) >> return 0; >> } >> -static int __maybe_unused xhci_plat_resume(struct device *dev) >> +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg) >> { >> struct usb_hcd *hcd = dev_get_drvdata(dev); >> struct xhci_hcd *xhci = hcd_to_xhci(hcd); >> @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) >> if (ret) >> return ret; >> - ret = xhci_resume(xhci, PMSG_RESUME); >> + ret = xhci_resume(xhci, pmsg); >> if (ret) >> return ret; >> @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) >> return 0; >> } >> +static int __maybe_unused xhci_plat_resume(struct device *dev) >> +{ >> + return xhci_plat_resume_common(dev, PMSG_RESUME); >> +} >> + >> +static int __maybe_unused xhci_plat_restore(struct device *dev) >> +{ >> + return xhci_plat_resume_common(dev, PMSG_RESTORE); >> +} >> + >> static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) >> { >> struct usb_hcd *hcd = dev_get_drvdata(dev); >> @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) >> } >> const struct dev_pm_ops xhci_plat_pm_ops = { >> - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) >> - >> +#ifdef CONFIG_PM_SLEEP >> + .suspend = xhci_plat_suspend, >> + .resume = xhci_plat_resume, >> + .freeze = xhci_plat_suspend, >> + .thaw = xhci_plat_resume, >> + .poweroff = xhci_plat_suspend, >> + .restore = xhci_plat_restore, >> +#endif How about using pm_ptr() and pm_sleep_ptr() macros instead of the #ifdef CONFIG_PM_SLEEP? should be able to get rif of the __maybe_unused flags as well. Thanks -Mathias
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 28218c8f1837..112468fdcca2 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) return 0; } -static int __maybe_unused xhci_plat_resume(struct device *dev) +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) if (ret) return ret; - ret = xhci_resume(xhci, PMSG_RESUME); + ret = xhci_resume(xhci, pmsg); if (ret) return ret; @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) return 0; } +static int __maybe_unused xhci_plat_resume(struct device *dev) +{ + return xhci_plat_resume_common(dev, PMSG_RESUME); +} + +static int __maybe_unused xhci_plat_restore(struct device *dev) +{ + return xhci_plat_resume_common(dev, PMSG_RESTORE); +} + static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev) } const struct dev_pm_ops xhci_plat_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) - +#ifdef CONFIG_PM_SLEEP + .suspend = xhci_plat_suspend, + .resume = xhci_plat_resume, + .freeze = xhci_plat_suspend, + .thaw = xhci_plat_resume, + .poweroff = xhci_plat_suspend, + .restore = xhci_plat_restore, +#endif SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume, NULL)
The xhci retaining bogus hardware states cause usb disconnect devices connected before hibernation(s4) and refer to the commit 'f3d478858be ("usb: ohci-platform: fix usb disconnect issue after s4")' which set flag "hibernated" as true when resume-from-hibernation and that the drivers will reset the hardware to get rid of any existing state and make sure resume from hibernation re-enumerates everything for xhci. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> --- Change in v2: 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix compile issue when CONFIG_PM not enable. drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)