diff mbox series

[v5] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()

Message ID 20230919142502.13898-1-adiupina@astralinux.ru (mailing list archive)
State Accepted
Commit a59addacf899b1b21a7b7449a1c52c98704c2472
Delegated to: Netdev Maintainers
Headers show
Series [v5] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close() | expand

Checks

Context Check Description
netdev/series_format warning Single patches do not need cover letters; Target tree name not specified in the subject
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1340 this patch: 1340
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 1363 this patch: 1363
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 1363 this patch: 1363
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 38 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Alexandra Diupina Sept. 19, 2023, 2:25 p.m. UTC
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
---
v5: do some refactoring as Paolo Abeni <pabeni@redhat.com> and 
Christophe Leroy <christophe.leroy@csgroup.eu> suggested
v4: undo all the things done prior to hdlc_open() as 
Jakub Kicinski <kuba@kernel.org> suggested, 
add hdlc_close() call to the uhdlc_close() to match the function comment, 
add uhdlc_close() declaration to the top of the file not to put the 
uhdlc_close() function definition before uhdlc_open()
v3: Fix the commits tree
v2: Remove the 'rc' variable (stores the return value of the 
hdlc_open()) as Christophe Leroy <christophe.leroy@csgroup.eu> suggested
 drivers/net/wan/fsl_ucc_hdlc.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

Comments

Christophe Leroy Sept. 22, 2023, 7:09 a.m. UTC | #1
Le 19/09/2023 à 16:25, Alexandra Diupina a écrit :
> Process the result of hdlc_open() and call uhdlc_close()
> in case of an error. It is necessary to pass the error
> code up the control flow, similar to a possible
> error in request_irq().
> Also add a hdlc_close() call to the uhdlc_close()
> because the comment to hdlc_close() says it must be called
> by the hardware driver when the HDLC device is being closed
> 
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
> 
> Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
> Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>

Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>

> ---
> v5: do some refactoring as Paolo Abeni <pabeni@redhat.com> and
> Christophe Leroy <christophe.leroy@csgroup.eu> suggested
> v4: undo all the things done prior to hdlc_open() as
> Jakub Kicinski <kuba@kernel.org> suggested,
> add hdlc_close() call to the uhdlc_close() to match the function comment,
> add uhdlc_close() declaration to the top of the file not to put the
> uhdlc_close() function definition before uhdlc_open()
> v3: Fix the commits tree
> v2: Remove the 'rc' variable (stores the return value of the
> hdlc_open()) as Christophe Leroy <christophe.leroy@csgroup.eu> suggested
>   drivers/net/wan/fsl_ucc_hdlc.c | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
> index 47c2ad7a3e42..fd50bb313b92 100644
> --- a/drivers/net/wan/fsl_ucc_hdlc.c
> +++ b/drivers/net/wan/fsl_ucc_hdlc.c
> @@ -34,6 +34,8 @@
>   #define TDM_PPPOHT_SLIC_MAXIN
>   #define RX_BD_ERRORS (R_CD_S | R_OV_S | R_CR_S | R_AB_S | R_NO_S | R_LG_S)
>   
> +static int uhdlc_close(struct net_device *dev);
> +
>   static struct ucc_tdm_info utdm_primary_info = {
>   	.uf_info = {
>   		.tsa = 0,
> @@ -708,6 +710,7 @@ static int uhdlc_open(struct net_device *dev)
>   	hdlc_device *hdlc = dev_to_hdlc(dev);
>   	struct ucc_hdlc_private *priv = hdlc->priv;
>   	struct ucc_tdm *utdm = priv->utdm;
> +	int rc = 0;
>   
>   	if (priv->hdlc_busy != 1) {
>   		if (request_irq(priv->ut_info->uf_info.irq,
> @@ -731,10 +734,13 @@ static int uhdlc_open(struct net_device *dev)
>   		napi_enable(&priv->napi);
>   		netdev_reset_queue(dev);
>   		netif_start_queue(dev);
> -		hdlc_open(dev);
> +
> +		rc = hdlc_open(dev);
> +		if (rc)
> +			uhdlc_close(dev);
>   	}
>   
> -	return 0;
> +	return rc;
>   }
>   
>   static void uhdlc_memclean(struct ucc_hdlc_private *priv)
> @@ -824,6 +830,8 @@ static int uhdlc_close(struct net_device *dev)
>   	netdev_reset_queue(dev);
>   	priv->hdlc_busy = 0;
>   
> +	hdlc_close(dev);
> +
>   	return 0;
>   }
>
patchwork-bot+netdevbpf@kernel.org Sept. 22, 2023, 7:20 a.m. UTC | #2
Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Tue, 19 Sep 2023 17:25:02 +0300 you wrote:
> Process the result of hdlc_open() and call uhdlc_close()
> in case of an error. It is necessary to pass the error
> code up the control flow, similar to a possible
> error in request_irq().
> Also add a hdlc_close() call to the uhdlc_close()
> because the comment to hdlc_close() says it must be called
> by the hardware driver when the HDLC device is being closed
> 
> [...]

Here is the summary with links:
  - [v5] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
    https://git.kernel.org/netdev/net/c/a59addacf899

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index 47c2ad7a3e42..fd50bb313b92 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -34,6 +34,8 @@ 
 #define TDM_PPPOHT_SLIC_MAXIN
 #define RX_BD_ERRORS (R_CD_S | R_OV_S | R_CR_S | R_AB_S | R_NO_S | R_LG_S)
 
+static int uhdlc_close(struct net_device *dev);
+
 static struct ucc_tdm_info utdm_primary_info = {
 	.uf_info = {
 		.tsa = 0,
@@ -708,6 +710,7 @@  static int uhdlc_open(struct net_device *dev)
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	struct ucc_hdlc_private *priv = hdlc->priv;
 	struct ucc_tdm *utdm = priv->utdm;
+	int rc = 0;
 
 	if (priv->hdlc_busy != 1) {
 		if (request_irq(priv->ut_info->uf_info.irq,
@@ -731,10 +734,13 @@  static int uhdlc_open(struct net_device *dev)
 		napi_enable(&priv->napi);
 		netdev_reset_queue(dev);
 		netif_start_queue(dev);
-		hdlc_open(dev);
+
+		rc = hdlc_open(dev);
+		if (rc)
+			uhdlc_close(dev);
 	}
 
-	return 0;
+	return rc;
 }
 
 static void uhdlc_memclean(struct ucc_hdlc_private *priv)
@@ -824,6 +830,8 @@  static int uhdlc_close(struct net_device *dev)
 	netdev_reset_queue(dev);
 	priv->hdlc_busy = 0;
 
+	hdlc_close(dev);
+
 	return 0;
 }