| Message ID | 20230828-solid-fill-v6-8-a820efcce852@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Support for Solid Fill Planes | expand |
On 29/08/2023 03:05, Jessica Zhang wrote: > Since solid fill planes allow for a NULL framebuffer in a valid commit, > add NULL framebuffer checks to atomic commit calls within DPU. > > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 9 ++++++- > drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 41 ++++++++++++++++++++----------- > 2 files changed, 34 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > index 8ce7586e2ddf..5e845510e8c1 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > @@ -451,6 +451,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc, > struct drm_plane_state *state; > struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state); > struct dpu_plane_state *pstate = NULL; > + const struct msm_format *fmt; > struct dpu_format *format; > struct dpu_hw_ctl *ctl = mixer->lm_ctl; > > @@ -470,7 +471,13 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc, > pstate = to_dpu_plane_state(state); > fb = state->fb; > > - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb)); > + if (drm_plane_solid_fill_enabled(state)) > + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base, > + DRM_FORMAT_ABGR8888, 0); > + else > + fmt = msm_framebuffer_format(pstate->base.fb); > + > + format = to_dpu_format(fmt); > > if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable) > bg_alpha_enable = true; > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > index c2aaaded07ed..114c803ff99b 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c > @@ -837,8 +837,13 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, > > pipe_cfg->dst_rect = new_plane_state->dst; > > - fb_rect.x2 = new_plane_state->fb->width; > - fb_rect.y2 = new_plane_state->fb->height; > + if (drm_plane_solid_fill_enabled(new_plane_state)) > + return 0; This would skip all the width checks, dpu_plane_atomic_check_pipe(), etc. Could you please confirm that all of those checks are irrelevant for solid fill? > + > + if (new_plane_state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && new_plane_state->fb) { > + fb_rect.x2 = new_plane_state->fb->width; > + fb_rect.y2 = new_plane_state->fb->height; > + } > > /* Ensure fb size is supported */ > if (drm_rect_width(&fb_rect) > MAX_IMG_WIDTH || > @@ -1082,21 +1087,32 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) > struct drm_crtc *crtc = state->crtc; > struct drm_framebuffer *fb = state->fb; > bool is_rt_pipe; > - const struct dpu_format *fmt = > - to_dpu_format(msm_framebuffer_format(fb)); > + const struct dpu_format *fmt; > struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; > struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; > struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base); > struct msm_gem_address_space *aspace = kms->base.aspace; > struct dpu_hw_fmt_layout layout; > bool layout_valid = false; > - int ret; > > - ret = dpu_format_populate_layout(aspace, fb, &layout); > - if (ret) > - DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); > - else > - layout_valid = true; > + if (state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && fb) { > + int ret; > + > + fmt = to_dpu_format(msm_framebuffer_format(fb)); > + > + ret = dpu_format_populate_layout(aspace, fb, &layout); > + if (ret) > + DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); > + else > + layout_valid = true; > + > + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT > + ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src), > + crtc->base.id, DRM_RECT_ARG(&state->dst), > + (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); > + } else { > + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); #define DPU_SOLID_FILL_FORMAT ? Also, I don't think that solid_fill planes consume bandwidth, so this likely needs to be fixed too. > + } > > pstate->pending = true; > > @@ -1104,11 +1120,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) > pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe); > pdpu->is_rt_pipe = is_rt_pipe; > > - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT > - ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src), > - crtc->base.id, DRM_RECT_ARG(&state->dst), > - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); > - > dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt, > drm_mode_vrefresh(&crtc->mode), > layout_valid ? &layout : NULL); >
On 9/24/2023 3:29 AM, Dmitry Baryshkov wrote: > On 29/08/2023 03:05, Jessica Zhang wrote: >> Since solid fill planes allow for a NULL framebuffer in a valid commit, >> add NULL framebuffer checks to atomic commit calls within DPU. >> >> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> >> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 9 ++++++- >> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 41 >> ++++++++++++++++++++----------- >> 2 files changed, 34 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> index 8ce7586e2ddf..5e845510e8c1 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> @@ -451,6 +451,7 @@ static void _dpu_crtc_blend_setup_mixer(struct >> drm_crtc *crtc, >> struct drm_plane_state *state; >> struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state); >> struct dpu_plane_state *pstate = NULL; >> + const struct msm_format *fmt; >> struct dpu_format *format; >> struct dpu_hw_ctl *ctl = mixer->lm_ctl; >> @@ -470,7 +471,13 @@ static void _dpu_crtc_blend_setup_mixer(struct >> drm_crtc *crtc, >> pstate = to_dpu_plane_state(state); >> fb = state->fb; >> - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb)); >> + if (drm_plane_solid_fill_enabled(state)) >> + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base, >> + DRM_FORMAT_ABGR8888, 0); >> + else >> + fmt = msm_framebuffer_format(pstate->base.fb); >> + >> + format = to_dpu_format(fmt); >> if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable) >> bg_alpha_enable = true; >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> index c2aaaded07ed..114c803ff99b 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c >> @@ -837,8 +837,13 @@ static int dpu_plane_atomic_check(struct >> drm_plane *plane, >> pipe_cfg->dst_rect = new_plane_state->dst; >> - fb_rect.x2 = new_plane_state->fb->width; >> - fb_rect.y2 = new_plane_state->fb->height; >> + if (drm_plane_solid_fill_enabled(new_plane_state)) >> + return 0; > > This would skip all the width checks, dpu_plane_atomic_check_pipe(), > etc. Could you please confirm that all of those checks are irrelevant > for solid fill? Hi Dmitry, Good point -- I think it would be good to keep the rect and pipe checks for solid fill. > >> + >> + if (new_plane_state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && >> new_plane_state->fb) { >> + fb_rect.x2 = new_plane_state->fb->width; >> + fb_rect.y2 = new_plane_state->fb->height; >> + } >> /* Ensure fb size is supported */ >> if (drm_rect_width(&fb_rect) > MAX_IMG_WIDTH || >> @@ -1082,21 +1087,32 @@ static void >> dpu_plane_sspp_atomic_update(struct drm_plane *plane) >> struct drm_crtc *crtc = state->crtc; >> struct drm_framebuffer *fb = state->fb; >> bool is_rt_pipe; >> - const struct dpu_format *fmt = >> - to_dpu_format(msm_framebuffer_format(fb)); >> + const struct dpu_format *fmt; >> struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; >> struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; >> struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base); >> struct msm_gem_address_space *aspace = kms->base.aspace; >> struct dpu_hw_fmt_layout layout; >> bool layout_valid = false; >> - int ret; >> - ret = dpu_format_populate_layout(aspace, fb, &layout); >> - if (ret) >> - DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); >> - else >> - layout_valid = true; >> + if (state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && fb) { >> + int ret; >> + >> + fmt = to_dpu_format(msm_framebuffer_format(fb)); >> + >> + ret = dpu_format_populate_layout(aspace, fb, &layout); >> + if (ret) >> + DPU_ERROR_PLANE(pdpu, "failed to get format layout, >> %d\n", ret); >> + else >> + layout_valid = true; >> + >> + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " >> DRM_RECT_FMT >> + ", %4.4s ubwc %d\n", fb->base.id, >> DRM_RECT_FP_ARG(&state->src), >> + crtc->base.id, DRM_RECT_ARG(&state->dst), >> + (char *)&fmt->base.pixel_format, >> DPU_FORMAT_IS_UBWC(fmt)); >> + } else { >> + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); > > #define DPU_SOLID_FILL_FORMAT ? Acked. > > Also, I don't think that solid_fill planes consume bandwidth, so this > likely needs to be fixed too. You're right -- I think we can actually return early here if solid fill is enabled. Thanks, Jessica Zhang > > >> + } >> pstate->pending = true; >> @@ -1104,11 +1120,6 @@ static void dpu_plane_sspp_atomic_update(struct >> drm_plane *plane) >> pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe); >> pdpu->is_rt_pipe = is_rt_pipe; >> - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " >> DRM_RECT_FMT >> - ", %4.4s ubwc %d\n", fb->base.id, >> DRM_RECT_FP_ARG(&state->src), >> - crtc->base.id, DRM_RECT_ARG(&state->dst), >> - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); >> - >> dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt, >> drm_mode_vrefresh(&crtc->mode), >> layout_valid ? &layout : NULL); >> > > -- > With best wishes > Dmitry >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index 8ce7586e2ddf..5e845510e8c1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -451,6 +451,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc, struct drm_plane_state *state; struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state); struct dpu_plane_state *pstate = NULL; + const struct msm_format *fmt; struct dpu_format *format; struct dpu_hw_ctl *ctl = mixer->lm_ctl; @@ -470,7 +471,13 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc, pstate = to_dpu_plane_state(state); fb = state->fb; - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb)); + if (drm_plane_solid_fill_enabled(state)) + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base, + DRM_FORMAT_ABGR8888, 0); + else + fmt = msm_framebuffer_format(pstate->base.fb); + + format = to_dpu_format(fmt); if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable) bg_alpha_enable = true; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index c2aaaded07ed..114c803ff99b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -837,8 +837,13 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, pipe_cfg->dst_rect = new_plane_state->dst; - fb_rect.x2 = new_plane_state->fb->width; - fb_rect.y2 = new_plane_state->fb->height; + if (drm_plane_solid_fill_enabled(new_plane_state)) + return 0; + + if (new_plane_state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && new_plane_state->fb) { + fb_rect.x2 = new_plane_state->fb->width; + fb_rect.y2 = new_plane_state->fb->height; + } /* Ensure fb size is supported */ if (drm_rect_width(&fb_rect) > MAX_IMG_WIDTH || @@ -1082,21 +1087,32 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) struct drm_crtc *crtc = state->crtc; struct drm_framebuffer *fb = state->fb; bool is_rt_pipe; - const struct dpu_format *fmt = - to_dpu_format(msm_framebuffer_format(fb)); + const struct dpu_format *fmt; struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg; struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg; struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base); struct msm_gem_address_space *aspace = kms->base.aspace; struct dpu_hw_fmt_layout layout; bool layout_valid = false; - int ret; - ret = dpu_format_populate_layout(aspace, fb, &layout); - if (ret) - DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); - else - layout_valid = true; + if (state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && fb) { + int ret; + + fmt = to_dpu_format(msm_framebuffer_format(fb)); + + ret = dpu_format_populate_layout(aspace, fb, &layout); + if (ret) + DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret); + else + layout_valid = true; + + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT + ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src), + crtc->base.id, DRM_RECT_ARG(&state->dst), + (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); + } else { + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888); + } pstate->pending = true; @@ -1104,11 +1120,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe); pdpu->is_rt_pipe = is_rt_pipe; - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT - ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src), - crtc->base.id, DRM_RECT_ARG(&state->dst), - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt)); - dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt, drm_mode_vrefresh(&crtc->mode), layout_valid ? &layout : NULL);