diff mbox series

[1/3] usb: chipidea: Fix DMA overwrite for Tegra

Message ID d93fc79f2fcc8da5166ccb99c5703ff3fdb46259.1695497666.git.mirq-linux@rere.qmqm.pl (mailing list archive)
State Accepted
Commit 7ab8716713c931ac79988f2592e1cf8b2e4fec1b
Headers show
Series usb: chipidea: Tegra USB DMA fix + cleanups | expand

Commit Message

Michał Mirosław Sept. 23, 2023, 7:41 p.m. UTC
Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus
may write past the buffer provided. This is detected by SLUB:

=============================================================================
BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------

0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
 __kmem_cache_alloc_node+0x12f/0x1e4
 __kmalloc+0x33/0x8c
 usb_get_status+0x2b/0xac
 hub_probe+0x5e9/0xcec
 usb_probe_interface+0xbf/0x21c
 really_probe+0xa5/0x2c4
 __driver_probe_device+0x75/0x174
 driver_probe_device+0x31/0x94
 __device_attach_driver+0x65/0xc0
 bus_for_each_drv+0x4b/0x74
 __device_attach+0x69/0x120
 bus_probe_device+0x65/0x6c
 device_add+0x48b/0x5f8
 usb_set_configuration+0x37b/0x6b4
 usb_generic_driver_probe+0x37/0x68
 usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000

Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cd40: cc cc cc cc                                      ....
Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
 drivers/usb/chipidea/host.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Peter Chen Sept. 25, 2023, 11:45 a.m. UTC | #1
On 23-09-23 21:41:55, Michał Mirosław wrote:
> Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus
> may write past the buffer provided. This is detected by SLUB:
> 
> =============================================================================
> BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
> -----------------------------------------------------------------------------
> 
> 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
> Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
>  __kmem_cache_alloc_node+0x12f/0x1e4
>  __kmalloc+0x33/0x8c
>  usb_get_status+0x2b/0xac
>  hub_probe+0x5e9/0xcec
>  usb_probe_interface+0xbf/0x21c
>  really_probe+0xa5/0x2c4
>  __driver_probe_device+0x75/0x174
>  driver_probe_device+0x31/0x94
>  __device_attach_driver+0x65/0xc0
>  bus_for_each_drv+0x4b/0x74
>  __device_attach+0x69/0x120
>  bus_probe_device+0x65/0x6c
>  device_add+0x48b/0x5f8
>  usb_set_configuration+0x37b/0x6b4
>  usb_generic_driver_probe+0x37/0x68
>  usb_probe_device+0x35/0xb4
> Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
> Object 0x8555cd00 @offset=3328 fp=0x00000000
> 
> Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> Redzone  8555cd40: cc cc cc cc                                      ....
> Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
> CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
> Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> Workqueue: usb_hub_wq hub_event
> [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
> [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
> [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
> [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
> [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
> [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
> [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
> [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
> [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
> [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
> [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
> [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
> usb 1-1: device descriptor read/8, error -71
> 
> Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> ---
>  drivers/usb/chipidea/host.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index 08af26b762a2..abddd39d1ff1 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
>  	const unsigned int ci_hdrc_usb_dma_align = 32;
>  	size_t kmalloc_size;
>  
> -	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 ||
> -	    !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)))
> +	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
> +		return 0;
> +	if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3))
>  		return 0;
>  
>  	/* Allocate a buffer with enough padding for alignment */
> -	kmalloc_size = urb->transfer_buffer_length +
> +	kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) +
>  		       sizeof(struct ci_hdrc_dma_aligned_buffer) +
>  		       ci_hdrc_usb_dma_align - 1;
>  

Would you please explain why you make these changes?
Michał Mirosław Sept. 25, 2023, 11:53 p.m. UTC | #2
On Mon, Sep 25, 2023 at 07:45:22PM +0800, Peter Chen wrote:
> On 23-09-23 21:41:55, Michał Mirosław wrote:
> > Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus
> > may write past the buffer provided. This is detected by SLUB:
> > 
> > =============================================================================
> > BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
> > -----------------------------------------------------------------------------
> > 
> > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
> > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
> >  __kmem_cache_alloc_node+0x12f/0x1e4
> >  __kmalloc+0x33/0x8c
> >  usb_get_status+0x2b/0xac
> >  hub_probe+0x5e9/0xcec
> >  usb_probe_interface+0xbf/0x21c
> >  really_probe+0xa5/0x2c4
> >  __driver_probe_device+0x75/0x174
> >  driver_probe_device+0x31/0x94
> >  __device_attach_driver+0x65/0xc0
> >  bus_for_each_drv+0x4b/0x74
> >  __device_attach+0x69/0x120
> >  bus_probe_device+0x65/0x6c
> >  device_add+0x48b/0x5f8
> >  usb_set_configuration+0x37b/0x6b4
> >  usb_generic_driver_probe+0x37/0x68
> >  usb_probe_device+0x35/0xb4
> > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
> > Object 0x8555cd00 @offset=3328 fp=0x00000000
> > 
> > Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > Redzone  8555cd40: cc cc cc cc                                      ....
> > Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
> > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
> > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> > Workqueue: usb_hub_wq hub_event
> > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
> > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
> > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
> > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
> > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
> > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
> > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
> > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
> > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
> > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
> > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
> > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
> > usb 1-1: device descriptor read/8, error -71
> > 
> > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
> > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> > ---
> >  drivers/usb/chipidea/host.c | 7 ++++---
> >  1 file changed, 4 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> > index 08af26b762a2..abddd39d1ff1 100644
> > --- a/drivers/usb/chipidea/host.c
> > +++ b/drivers/usb/chipidea/host.c
> > @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
> >  	const unsigned int ci_hdrc_usb_dma_align = 32;
> >  	size_t kmalloc_size;
> >  
> > -	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 ||
> > -	    !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)))
> > +	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
> > +		return 0;
> > +	if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3))
> >  		return 0;
> >  
> >  	/* Allocate a buffer with enough padding for alignment */
> > -	kmalloc_size = urb->transfer_buffer_length +
> > +	kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) +
> >  		       sizeof(struct ci_hdrc_dma_aligned_buffer) +
> >  		       ci_hdrc_usb_dma_align - 1;
> >  
> 
> Would you please explain why you make these changes?

Can you point out what's unclear in the commit message? This is to fix
a buffer overflow by DMA from the USB controller as it seems to write
data 32-bit word at a time. What the patch does is extend the workaround
code to account for the extra room needed at the tail of the buffer.

Best Regards
Michał Mirosław
Peter Chen Sept. 26, 2023, 12:11 p.m. UTC | #3
On 23-09-26 01:53:39, Michał Mirosław wrote:
> On Mon, Sep 25, 2023 at 07:45:22PM +0800, Peter Chen wrote:
> > On 23-09-23 21:41:55, Michał Mirosław wrote:
> > > Tegra USB controllers seem to issue DMA in doubleword-sized chunks and thus
> > > may write past the buffer provided. This is detected by SLUB:
> > > 
> > > =============================================================================
> > > BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
> > > -----------------------------------------------------------------------------
> > > 
> > > 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
> > > Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
> > >  __kmem_cache_alloc_node+0x12f/0x1e4
> > >  __kmalloc+0x33/0x8c
> > >  usb_get_status+0x2b/0xac
> > >  hub_probe+0x5e9/0xcec
> > >  usb_probe_interface+0xbf/0x21c
> > >  really_probe+0xa5/0x2c4
> > >  __driver_probe_device+0x75/0x174
> > >  driver_probe_device+0x31/0x94
> > >  __device_attach_driver+0x65/0xc0
> > >  bus_for_each_drv+0x4b/0x74
> > >  __device_attach+0x69/0x120
> > >  bus_probe_device+0x65/0x6c
> > >  device_add+0x48b/0x5f8
> > >  usb_set_configuration+0x37b/0x6b4
> > >  usb_generic_driver_probe+0x37/0x68
> > >  usb_probe_device+0x35/0xb4
> > > Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
> > > Object 0x8555cd00 @offset=3328 fp=0x00000000
> > > 
> > > Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
> > > Redzone  8555cd40: cc cc cc cc                                      ....
> > > Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
> > > CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
> > > Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
> > > Workqueue: usb_hub_wq hub_event
> > > [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
> > > [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
> > > [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
> > > [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
> > > [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
> > > [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
> > > [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
> > > [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
> > > [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
> > > [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
> > > [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
> > > [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
> > > usb 1-1: device descriptor read/8, error -71
> > > 
> > > Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
> > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> > > ---
> > >  drivers/usb/chipidea/host.c | 7 ++++---
> > >  1 file changed, 4 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> > > index 08af26b762a2..abddd39d1ff1 100644
> > > --- a/drivers/usb/chipidea/host.c
> > > +++ b/drivers/usb/chipidea/host.c
> > > @@ -411,12 +411,13 @@ static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
> > >  	const unsigned int ci_hdrc_usb_dma_align = 32;
> > >  	size_t kmalloc_size;
> > >  
> > > -	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 ||
> > > -	    !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)))
> > > +	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
> > > +		return 0;
> > > +	if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3))
> > >  		return 0;
> > >  
> > >  	/* Allocate a buffer with enough padding for alignment */
> > > -	kmalloc_size = urb->transfer_buffer_length +
> > > +	kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) +
> > >  		       sizeof(struct ci_hdrc_dma_aligned_buffer) +
> > >  		       ci_hdrc_usb_dma_align - 1;
> > >  
> > 
> > Would you please explain why you make these changes?
> 
> Can you point out what's unclear in the commit message?

You may appended below words to commit log, current commit log looks too
simple.

> This is to fix
> a buffer overflow by DMA from the USB controller as it seems to write
> data 32-bit word at a time. What the patch does is extend the workaround
> code to account for the extra room needed at the tail of the buffer.
> 
> Best Regards
> Michał Mirosław
diff mbox series

Patch

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 08af26b762a2..abddd39d1ff1 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -411,12 +411,13 @@  static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
 	const unsigned int ci_hdrc_usb_dma_align = 32;
 	size_t kmalloc_size;
 
-	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 ||
-	    !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)))
+	if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0)
+		return 0;
+	if (!((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1)) && !(urb->transfer_buffer_length & 3))
 		return 0;
 
 	/* Allocate a buffer with enough padding for alignment */
-	kmalloc_size = urb->transfer_buffer_length +
+	kmalloc_size = ALIGN(urb->transfer_buffer_length, 4) +
 		       sizeof(struct ci_hdrc_dma_aligned_buffer) +
 		       ci_hdrc_usb_dma_align - 1;