| Message ID | 20230928063448.3544464-3-xianwei.zhao@amlogic.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add C3 SoC PLLs and Peripheral clock | expand |
On Thu, 28 Sep 2023 14:34:46 +0800, Xianwei Zhao wrote: > Add the peripherals clock controller dt-bindings for Amlogic C3 SoC family > > Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> > --- > .../clock/amlogic,c3-peripherals-clkc.yaml | 86 +++++++ > .../clock/amlogic,c3-peripherals-clkc.h | 230 ++++++++++++++++++ > 2 files changed, 316 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml > create mode 100644 include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed: [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too long [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 10 is greater than the maximum of 8 10 is greater than the maximum of 9 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too long [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 10 is greater than the maximum of 8 10 is greater than the maximum of 9 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# Error: Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.example.dts:23.31-32 syntax error FATAL ERROR: Unable to parse input tree make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.example.dtb] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2 make: *** [Makefile:234: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230928063448.3544464-3-xianwei.zhao@amlogic.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
Hi Xianwei, kernel test robot noticed the following build warnings: [auto build test WARNING on 57b55c76aaf1ba50ecc6dcee5cd6843dc4d85239] url: https://github.com/intel-lab-lkp/linux/commits/Xianwei-Zhao/dt-bindings-clock-add-Amlogic-C3-PLL-clock-controller-bindings/20230928-143707 base: 57b55c76aaf1ba50ecc6dcee5cd6843dc4d85239 patch link: https://lore.kernel.org/r/20230928063448.3544464-3-xianwei.zhao%40amlogic.com patch subject: [PATCH 2/4] dt-bindings: clock: add Amlogic C3 peripherals clock controller bindings compiler: loongarch64-linux-gcc (GCC) 13.2.0 reproduce: (https://download.01.org/0day-ci/archive/20230928/202309282224.aGUP85Fs-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202309282224.aGUP85Fs-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:2:1: [error] missing document start "---" (document-start) >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:50:1: [error] syntax error: found character '\t' that cannot start any token (syntax) -- >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:4:1: but found another document >> Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed: [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too long [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 10 is greater than the maximum of 8 10 is greater than the maximum of 9 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# >> Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too long [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 -- >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml: ignoring, error parsing file
Hi Xianwei, kernel test robot noticed the following build warnings: [auto build test WARNING on 57b55c76aaf1ba50ecc6dcee5cd6843dc4d85239] url: https://github.com/intel-lab-lkp/linux/commits/Xianwei-Zhao/dt-bindings-clock-add-Amlogic-C3-PLL-clock-controller-bindings/20230928-143707 base: 57b55c76aaf1ba50ecc6dcee5cd6843dc4d85239 patch link: https://lore.kernel.org/r/20230928063448.3544464-3-xianwei.zhao%40amlogic.com patch subject: [PATCH 2/4] dt-bindings: clock: add Amlogic C3 peripherals clock controller bindings compiler: loongarch64-linux-gcc (GCC) 13.2.0 reproduce: (https://download.01.org/0day-ci/archive/20231008/202310081229.91lXpKLx-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202310081229.91lXpKLx-lkp@intel.com/ dtcheck warnings: (new ones prefixed by >>) >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:2:1: [error] missing document start "---" (document-start) >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:50:1: [error] syntax error: found character '\t' that cannot start any token (syntax) -- >> Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clocks: 'oneOf' conditional failed, one must be fixed: [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too long [{'description': 'input oscillator (usually at 24MHz)'}, {'description': 'input fixed pll'}, {'description': 'input fixed pll div2'}, {'description': 'input fixed pll div2p5'}, {'description': 'input fixed pll div3'}, {'description': 'input fixed pll div4'}, {'description': 'input fixed pll div5'}, {'description': 'input fixed pll div7'}, {'description': 'input gp0 pll'}, {'description': 'input hifi pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 10 is greater than the maximum of 8 10 is greater than the maximum of 9 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# >> Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml: properties:clock-names: 'oneOf' conditional failed, one must be fixed: [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too long [{'const': 'xtal'}, {'const': 'fixed_pll'}, {'const': 'fclk_div2'}, {'const': 'fclk_div2p5'}, {'const': 'fclk_div3'}, {'const': 'fclk_div4'}, {'const': 'fclk_div5'}, {'const': 'fclk_div7'}, {'const': 'gp0_pll'}, {'const': 'hifi_pll'}] is too short False schema does not allow 10 1 was expected 10 is greater than the maximum of 2 10 is greater than the maximum of 3 10 is greater than the maximum of 4 10 is greater than the maximum of 5 10 is greater than the maximum of 6 10 is greater than the maximum of 7 10 is greater than the maximum of 8 10 is greater than the maximum of 9 hint: "minItems" is only needed if less than the "items" list length from schema $id: http://devicetree.org/meta-schemas/items.yaml# >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml:4:1: but found another document -- >> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml: ignoring, error parsing file
diff --git a/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml new file mode 100644 index 000000000000..ec4673714fa0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Amlogic, Inc. All rights reserved +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,c3-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic C serials Peripherals Clock Controller + +maintainers: + - Chuan Liu <chuan.liu@amlogic.com> + +properties: + compatible: + const: amlogic,c3-peripherals-clkc + + reg: + maxItems: 1 + + clocks: + minItems: 10 + items: + - description: input oscillator (usually at 24MHz) + - description: input fixed pll + - description: input fixed pll div2 + - description: input fixed pll div2p5 + - description: input fixed pll div3 + - description: input fixed pll div4 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input gp0 pll + - description: input hifi pll + + clock-names: + minItems: 10 + items: + - const: xtal + - const: fixed_pll + - const: fclk_div2 + - const: fclk_div2p5 + - const: fclk_div3 + - const: fclk_div4 + - const: fclk_div5 + - const: fclk_div7 + - const: gp0_pll + - const: hifi_pll + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clkc_periphs: clock-controller { + compatible = "amlogic,c3-peripherals-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&xtal>, + <&clkc_pll CLKID_FIXED_PLL>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_HIFI_PLL>; + clock-names = "xtal", + "fixed_pll", + "fclk_div2", + "fclk_div2p5", + "fclk_div3", + "fclk_div4", + "fclk_div5", + "fclk_div7", + "gp0_pll", + "hifi_pll"; + }; diff --git a/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h new file mode 100644 index 000000000000..82f9bf683ea0 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright (c) 2023 Amlogic, Inc. All rights reserved. + * Author: Chuan Liu <chuan.liu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H + +#define CLKID_PLL_IN 0 +#define CLKID_MCLK_PLL_IN 1 +#define CLKID_RTC_XTAL_CLKIN 2 +#define CLKID_RTC_32K_DIV 3 +#define CLKID_RTC_32K_MUX 4 +#define CLKID_RTC_32K 5 +#define CLKID_RTC_CLK 6 +#define CLKID_SYS_A_SEL 7 +#define CLKID_SYS_A_DIV 8 +#define CLKID_SYS_A 9 +#define CLKID_SYS_B_SEL 10 +#define CLKID_SYS_B_DIV 11 +#define CLKID_SYS_B 12 +#define CLKID_SYS_CLK 13 +#define CLKID_AXI_A_SEL 14 +#define CLKID_AXI_A_DIV 15 +#define CLKID_AXI_A 16 +#define CLKID_AXI_B_SEL 17 +#define CLKID_AXI_B_DIV 18 +#define CLKID_AXI_B 19 +#define CLKID_AXI_CLK 20 +#define CLKID_SYS_RESET_CTRL 21 +#define CLKID_SYS_PWR_CTRL 22 +#define CLKID_SYS_PAD_CTRL 23 +#define CLKID_SYS_CTRL 24 +#define CLKID_SYS_TS_PLL 25 +#define CLKID_SYS_DEV_ARB 26 +#define CLKID_SYS_MMC_PCLK 27 +#define CLKID_SYS_CAPU 28 +#define CLKID_SYS_CPU_CTRL 29 +#define CLKID_SYS_JTAG_CTRL 30 +#define CLKID_SYS_IR_CTRL 31 +#define CLKID_SYS_IRQ_CTRL 32 +#define CLKID_SYS_MSR_CLK 33 +#define CLKID_SYS_ROM 34 +#define CLKID_SYS_UART_F 35 +#define CLKID_SYS_CPU_ARB 36 +#define CLKID_SYS_RSA 37 +#define CLKID_SYS_SAR_ADC 38 +#define CLKID_SYS_STARTUP 39 +#define CLKID_SYS_SECURE 40 +#define CLKID_SYS_SPIFC 41 +#define CLKID_SYS_NNA 42 +#define CLKID_SYS_ETH_MAC 43 +#define CLKID_SYS_GIC 44 +#define CLKID_SYS_RAMA 45 +#define CLKID_SYS_BIG_NIC 46 +#define CLKID_SYS_RAMB 47 +#define CLKID_SYS_AUDIO_PCLK 48 +#define CLKID_SYS_PWM_KL 49 +#define CLKID_SYS_PWM_IJ 50 +#define CLKID_SYS_USB 51 +#define CLKID_SYS_SD_EMMC_A 52 +#define CLKID_SYS_SD_EMMC_C 53 +#define CLKID_SYS_PWM_AB 54 +#define CLKID_SYS_PWM_CD 55 +#define CLKID_SYS_PWM_EF 56 +#define CLKID_SYS_PWM_GH 57 +#define CLKID_SYS_SPICC_1 58 +#define CLKID_SYS_SPICC_0 59 +#define CLKID_SYS_UART_A 60 +#define CLKID_SYS_UART_B 61 +#define CLKID_SYS_UART_C 62 +#define CLKID_SYS_UART_D 63 +#define CLKID_SYS_UART_E 64 +#define CLKID_SYS_I2C_M_A 65 +#define CLKID_SYS_I2C_M_B 66 +#define CLKID_SYS_I2C_M_C 67 +#define CLKID_SYS_I2C_M_D 68 +#define CLKID_SYS_I2S_S_A 69 +#define CLKID_SYS_RTC 70 +#define CLKID_SYS_GE2D 71 +#define CLKID_SYS_ISP 72 +#define CLKID_SYS_GPV_ISP_NIC 73 +#define CLKID_SYS_GPV_CVE_NIC 74 +#define CLKID_SYS_MIPI_DSI_HOST 75 +#define CLKID_SYS_MIPI_DSI_PHY 76 +#define CLKID_SYS_ETH_PHY 77 +#define CLKID_SYS_ACODEC 78 +#define CLKID_SYS_DWAP 79 +#define CLKID_SYS_DOS 80 +#define CLKID_SYS_CVE 81 +#define CLKID_SYS_VOUT 82 +#define CLKID_SYS_VC9000E 83 +#define CLKID_SYS_PWM_MN 84 +#define CLKID_SYS_SD_EMMC_B 85 +#define CLKID_AXI_SYS_NIC 86 +#define CLKID_AXI_ISP_NIC 87 +#define CLKID_AXI_CVE_NIC 88 +#define CLKID_AXI_RAMB 89 +#define CLKID_AXI_RAMA 90 +#define CLKID_AXI_CPU_DMC 91 +#define CLKID_AXI_NIC 92 +#define CLKID_AXI_DMA 93 +#define CLKID_AXI_MUX_NIC 94 +#define CLKID_AXI_CAPU 95 +#define CLKID_AXI_CVE 96 +#define CLKID_AXI_DEV1_DMC 97 +#define CLKID_AXI_DEV0_DMC 98 +#define CLKID_AXI_DSP_DMC 99 +#define CLKID_12_24M_IN 100 +#define CLKID_12M_24M 101 +#define CLKID_FCLK_25M_DIV 102 +#define CLKID_FCLK_25M 103 +#define CLKID_GEN_SEL 104 +#define CLKID_GEN_DIV 105 +#define CLKID_GEN 106 +#define CLKID_SARADC_SEL 107 +#define CLKID_SARADC_DIV 108 +#define CLKID_SARADC 109 +#define CLKID_PWM_A_SEL 110 +#define CLKID_PWM_A_DIV 111 +#define CLKID_PWM_A 112 +#define CLKID_PWM_B_SEL 113 +#define CLKID_PWM_B_DIV 114 +#define CLKID_PWM_B 115 +#define CLKID_PWM_C_SEL 116 +#define CLKID_PWM_C_DIV 117 +#define CLKID_PWM_C 118 +#define CLKID_PWM_D_SEL 119 +#define CLKID_PWM_D_DIV 120 +#define CLKID_PWM_D 121 +#define CLKID_PWM_E_SEL 122 +#define CLKID_PWM_E_DIV 123 +#define CLKID_PWM_E 124 +#define CLKID_PWM_F_SEL 125 +#define CLKID_PWM_F_DIV 126 +#define CLKID_PWM_F 127 +#define CLKID_PWM_G_SEL 128 +#define CLKID_PWM_G_DIV 129 +#define CLKID_PWM_G 130 +#define CLKID_PWM_H_SEL 131 +#define CLKID_PWM_H_DIV 132 +#define CLKID_PWM_H 133 +#define CLKID_PWM_I_SEL 134 +#define CLKID_PWM_I_DIV 135 +#define CLKID_PWM_I 136 +#define CLKID_PWM_J_SEL 137 +#define CLKID_PWM_J_DIV 138 +#define CLKID_PWM_J 139 +#define CLKID_PWM_K_SEL 140 +#define CLKID_PWM_K_DIV 141 +#define CLKID_PWM_K 142 +#define CLKID_PWM_L_SEL 143 +#define CLKID_PWM_L_DIV 144 +#define CLKID_PWM_L 145 +#define CLKID_PWM_M_SEL 146 +#define CLKID_PWM_M_DIV 147 +#define CLKID_PWM_M 148 +#define CLKID_PWM_N_SEL 149 +#define CLKID_PWM_N_DIV 150 +#define CLKID_PWM_N 151 +#define CLKID_SPICC_A_SEL 152 +#define CLKID_SPICC_A_DIV 153 +#define CLKID_SPICC_A 154 +#define CLKID_SPICC_B_SEL 155 +#define CLKID_SPICC_B_DIV 156 +#define CLKID_SPICC_B 157 +#define CLKID_SPIFC_SEL 158 +#define CLKID_SPIFC_DIV 159 +#define CLKID_SPIFC 160 +#define CLKID_SD_EMMC_A_SEL 161 +#define CLKID_SD_EMMC_A_DIV 162 +#define CLKID_SD_EMMC_A 163 +#define CLKID_SD_EMMC_B_SEL 164 +#define CLKID_SD_EMMC_B_DIV 165 +#define CLKID_SD_EMMC_B 166 +#define CLKID_SD_EMMC_C_SEL 167 +#define CLKID_SD_EMMC_C_DIV 168 +#define CLKID_SD_EMMC_C 169 +#define CLKID_TS_DIV 170 +#define CLKID_TS 171 +#define CLKID_ETH_125M_DIV 172 +#define CLKID_ETH_125M 173 +#define CLKID_ETH_RMII_DIV 174 +#define CLKID_ETH_RMII 175 +#define CLKID_MIPI_DSI_MEAS_SEL 176 +#define CLKID_MIPI_DSI_MEAS_DIV 177 +#define CLKID_MIPI_DSI_MEAS 178 +#define CLKID_DSI_PHY_SEL 179 +#define CLKID_DSI_PHY_DIV 180 +#define CLKID_DSI_PHY 181 +#define CLKID_VOUT_MCLK_SEL 182 +#define CLKID_VOUT_MCLK_DIV 183 +#define CLKID_VOUT_MCLK 184 +#define CLKID_VOUT_ENC_SEL 185 +#define CLKID_VOUT_ENC_DIV 186 +#define CLKID_VOUT_ENC 187 +#define CLKID_HCODEC_0_SEL 188 +#define CLKID_HCODEC_0_DIV 189 +#define CLKID_HCODEC_0 190 +#define CLKID_HCODEC_1_SEL 191 +#define CLKID_HCODEC_1_DIV 192 +#define CLKID_HCODEC_1 193 +#define CLKID_HCODEC 194 +#define CLKID_VC9000E_ACLK_SEL 195 +#define CLKID_VC9000E_ACLK_DIV 196 +#define CLKID_VC9000E_ACLK 197 +#define CLKID_VC9000E_CORE_SEL 198 +#define CLKID_VC9000E_CORE_DIV 199 +#define CLKID_VC9000E_CORE 200 +#define CLKID_CSI_PHY0_SEL 201 +#define CLKID_CSI_PHY0_DIV 202 +#define CLKID_CSI_PHY0 203 +#define CLKID_DEWARPA_SEL 204 +#define CLKID_DEWARPA_DIV 205 +#define CLKID_DEWARPA 206 +#define CLKID_ISP0_SEL 207 +#define CLKID_ISP0_DIV 208 +#define CLKID_ISP0 209 +#define CLKID_NNA_CORE_SEL 210 +#define CLKID_NNA_CORE_DIV 211 +#define CLKID_NNA_CORE 212 +#define CLKID_GE2D_SEL 213 +#define CLKID_GE2D_DIV 214 +#define CLKID_GE2D 215 +#define CLKID_VAPB_SEL 216 +#define CLKID_VAPB_DIV 217 +#define CLKID_VAPB 218 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_C3_PERIPHERALS_CLKC_H */
Add the peripherals clock controller dt-bindings for Amlogic C3 SoC family Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> --- .../clock/amlogic,c3-peripherals-clkc.yaml | 86 +++++++ .../clock/amlogic,c3-peripherals-clkc.h | 230 ++++++++++++++++++ 2 files changed, 316 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,c3-peripherals-clkc.yaml create mode 100644 include/dt-bindings/clock/amlogic,c3-peripherals-clkc.h