diff mbox series

[1/2] fstests: redirect fsstress' stdout to $seqres.full instead of /dev/null

Message ID bbd99333b3c2dcd44c10958aeab43c22c91a738f.1696333874.git.fdmanana@suse.com (mailing list archive)
State New, archived
Headers show
Series fstests: make some tests that use fsstress easier to debug | expand

Commit Message

Filipe Manana Oct. 3, 2023, 11:57 a.m. UTC 
From: Filipe Manana <fdmanana@suse.com>

Several tests are redirecting the output of fsstress to /dev/null and this
makes it harder to debug a test failure because we have no way of knowing
what was the seed used by fsstress, as fsstress outputs the seed it uses
to stdout. Very often when such a test fails, I have to go modify to
redirect stdout to the $seqres.full file and then run it in a loop until
I find a seed that causes a failure.

So modify all tests that redirect fsstress' output to /dev/null to instead
redirect it to the $seqres.full file. Note that for some tests I've added
the style ">> $seqres.full" (with a space after >>) while for others I did
">>$seqres.full" (no space) - the reason for this was to keep style
consistency within each test case.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 tests/btrfs/028   | 2 +-
 tests/btrfs/049   | 2 +-
 tests/btrfs/060   | 2 +-
 tests/btrfs/061   | 2 +-
 tests/btrfs/062   | 2 +-
 tests/btrfs/063   | 2 +-
 tests/btrfs/064   | 2 +-
 tests/btrfs/065   | 2 +-
 tests/btrfs/066   | 2 +-
 tests/btrfs/067   | 2 +-
 tests/btrfs/068   | 2 +-
 tests/btrfs/069   | 2 +-
 tests/btrfs/070   | 2 +-
 tests/btrfs/071   | 2 +-
 tests/btrfs/072   | 2 +-
 tests/btrfs/073   | 2 +-
 tests/btrfs/074   | 2 +-
 tests/btrfs/136   | 2 +-
 tests/btrfs/192   | 2 +-
 tests/btrfs/232   | 2 +-
 tests/btrfs/261   | 2 +-
 tests/btrfs/286   | 2 +-
 tests/ext4/057    | 2 +-
 tests/ext4/307    | 2 +-
 tests/generic/068 | 2 +-
 tests/generic/269 | 2 +-
 tests/generic/409 | 2 +-
 tests/generic/410 | 2 +-
 tests/generic/411 | 2 +-
 tests/generic/589 | 2 +-
 tests/xfs/051     | 2 +-
 tests/xfs/057     | 2 +-
 tests/xfs/297     | 2 +-
 tests/xfs/305     | 2 +-
 tests/xfs/538     | 2 +-
 35 files changed, 35 insertions(+), 35 deletions(-)

Comments

Darrick J. Wong Oct. 3, 2023, 3:24 p.m. UTC | #1 
On Tue, Oct 03, 2023 at 12:57:44PM +0100, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Several tests are redirecting the output of fsstress to /dev/null and this
> makes it harder to debug a test failure because we have no way of knowing
> what was the seed used by fsstress, as fsstress outputs the seed it uses
> to stdout. Very often when such a test fails, I have to go modify to
> redirect stdout to the $seqres.full file and then run it in a loop until
> I find a seed that causes a failure.
> 
> So modify all tests that redirect fsstress' output to /dev/null to instead
> redirect it to the $seqres.full file. Note that for some tests I've added
> the style ">> $seqres.full" (with a space after >>) while for others I did
> ">>$seqres.full" (no space) - the reason for this was to keep style
> consistency within each test case.
> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>  tests/btrfs/028   | 2 +-
>  tests/btrfs/049   | 2 +-
>  tests/btrfs/060   | 2 +-
>  tests/btrfs/061   | 2 +-
>  tests/btrfs/062   | 2 +-
>  tests/btrfs/063   | 2 +-
>  tests/btrfs/064   | 2 +-
>  tests/btrfs/065   | 2 +-
>  tests/btrfs/066   | 2 +-
>  tests/btrfs/067   | 2 +-
>  tests/btrfs/068   | 2 +-
>  tests/btrfs/069   | 2 +-
>  tests/btrfs/070   | 2 +-
>  tests/btrfs/071   | 2 +-
>  tests/btrfs/072   | 2 +-
>  tests/btrfs/073   | 2 +-
>  tests/btrfs/074   | 2 +-
>  tests/btrfs/136   | 2 +-
>  tests/btrfs/192   | 2 +-
>  tests/btrfs/232   | 2 +-
>  tests/btrfs/261   | 2 +-
>  tests/btrfs/286   | 2 +-
>  tests/ext4/057    | 2 +-
>  tests/ext4/307    | 2 +-
>  tests/generic/068 | 2 +-
>  tests/generic/269 | 2 +-
>  tests/generic/409 | 2 +-
>  tests/generic/410 | 2 +-
>  tests/generic/411 | 2 +-
>  tests/generic/589 | 2 +-
>  tests/xfs/051     | 2 +-
>  tests/xfs/057     | 2 +-
>  tests/xfs/297     | 2 +-
>  tests/xfs/305     | 2 +-
>  tests/xfs/538     | 2 +-

For the generic & xfs parts,
Acked-by: Darrick J. Wong <djwong@kernel.org>

(The rest are also probably ok but I'm much less familiar with the
btrfs-specific tests.)

--D

>  35 files changed, 35 insertions(+), 35 deletions(-)
> 
> diff --git a/tests/btrfs/028 b/tests/btrfs/028
> index fe0678f8..4637469c 100755
> --- a/tests/btrfs/028
> +++ b/tests/btrfs/028
> @@ -35,7 +35,7 @@ args=`_scale_fsstress_args -z \
>  	-f fsync=10 -n 100000 -p 2 \
>  	-d $SCRATCH_MNT/stress_dir`
>  echo "Run fsstress $args" >>$seqres.full
> -$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +$FSSTRESS_PROG $args >>$seqres.full &
>  fsstress_pid=$!
>  
>  echo "Start balance" >>$seqres.full
> diff --git a/tests/btrfs/049 b/tests/btrfs/049
> index 9569c141..c48e4087 100755
> --- a/tests/btrfs/049
> +++ b/tests/btrfs/049
> @@ -42,7 +42,7 @@ args=`_scale_fsstress_args -z \
>  	-f write=10 -f creat=10 \
>  	-n 1000 -p 2 -d $SCRATCH_MNT/stress_dir`
>  echo "Run fsstress $args" >>$seqres.full
> -$FSSTRESS_PROG $args >/dev/null 2>&1
> +$FSSTRESS_PROG $args >>$seqres.full
>  
>  # Start and pause balance to ensure it will be restored on remount
>  echo "Start balance" >>$seqres.full
> diff --git a/tests/btrfs/060 b/tests/btrfs/060
> index 7dd4d2af..a0184891 100755
> --- a/tests/btrfs/060
> +++ b/tests/btrfs/060
> @@ -38,7 +38,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start balance worker: " >>$seqres.full
> diff --git a/tests/btrfs/061 b/tests/btrfs/061
> index 55f5625b..c1010413 100755
> --- a/tests/btrfs/061
> +++ b/tests/btrfs/061
> @@ -36,7 +36,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start balance worker: " >>$seqres.full
> diff --git a/tests/btrfs/062 b/tests/btrfs/062
> index 10f95111..818a0156 100755
> --- a/tests/btrfs/062
> +++ b/tests/btrfs/062
> @@ -37,7 +37,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start balance worker: " >>$seqres.full
> diff --git a/tests/btrfs/063 b/tests/btrfs/063
> index cef80771..2f771baf 100755
> --- a/tests/btrfs/063
> +++ b/tests/btrfs/063
> @@ -36,7 +36,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start balance worker: " >>$seqres.full
> diff --git a/tests/btrfs/064 b/tests/btrfs/064
> index f29e68ba..e9b46ce6 100755
> --- a/tests/btrfs/064
> +++ b/tests/btrfs/064
> @@ -46,7 +46,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	# Start both balance and replace in the background.
> diff --git a/tests/btrfs/065 b/tests/btrfs/065
> index b6c9dbad..c4b6aafe 100755
> --- a/tests/btrfs/065
> +++ b/tests/btrfs/065
> @@ -46,7 +46,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	# make sure the stop sign is not there
> diff --git a/tests/btrfs/066 b/tests/btrfs/066
> index 8d12af61..a29034bb 100755
> --- a/tests/btrfs/066
> +++ b/tests/btrfs/066
> @@ -38,7 +38,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	# make sure the stop sign is not there
> diff --git a/tests/btrfs/067 b/tests/btrfs/067
> index 970a23c4..709db155 100755
> --- a/tests/btrfs/067
> +++ b/tests/btrfs/067
> @@ -39,7 +39,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	# make sure the stop sign is not there
> diff --git a/tests/btrfs/068 b/tests/btrfs/068
> index e0bcc2ac..15fd41db 100755
> --- a/tests/btrfs/068
> +++ b/tests/btrfs/068
> @@ -39,7 +39,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	# make sure the stop sign is not there
> diff --git a/tests/btrfs/069 b/tests/btrfs/069
> index 6e798a2e..139dde48 100755
> --- a/tests/btrfs/069
> +++ b/tests/btrfs/069
> @@ -44,7 +44,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start replace worker: " >>$seqres.full
> diff --git a/tests/btrfs/070 b/tests/btrfs/070
> index f2e61ad3..54aa275c 100755
> --- a/tests/btrfs/070
> +++ b/tests/btrfs/070
> @@ -45,7 +45,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start replace worker: " >>$seqres.full
> diff --git a/tests/btrfs/071 b/tests/btrfs/071
> index 40230b11..6ebbd8cc 100755
> --- a/tests/btrfs/071
> +++ b/tests/btrfs/071
> @@ -44,7 +44,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start replace worker: " >>$seqres.full
> diff --git a/tests/btrfs/072 b/tests/btrfs/072
> index bcb0ea25..4b6b6fb5 100755
> --- a/tests/btrfs/072
> +++ b/tests/btrfs/072
> @@ -37,7 +37,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start scrub worker: " >>$seqres.full
> diff --git a/tests/btrfs/073 b/tests/btrfs/073
> index 26c5deb6..b1604f94 100755
> --- a/tests/btrfs/073
> +++ b/tests/btrfs/073
> @@ -36,7 +36,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start scrub worker: " >>$seqres.full
> diff --git a/tests/btrfs/074 b/tests/btrfs/074
> index 92e25c7c..9b22c620 100755
> --- a/tests/btrfs/074
> +++ b/tests/btrfs/074
> @@ -37,7 +37,7 @@ run_test()
>  
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  
>  	echo -n "Start defrag worker: " >>$seqres.full
> diff --git a/tests/btrfs/136 b/tests/btrfs/136
> index b9ab8270..70e836a5 100755
> --- a/tests/btrfs/136
> +++ b/tests/btrfs/136
> @@ -39,7 +39,7 @@ populate_data(){
>  	mkdir -p $data_path
>  	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $data_path`
>  	echo "Run fsstress $args" >>$seqres.full
> -	$FSSTRESS_PROG $args >/dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >>$seqres.full &
>  	fsstress_pid=$!
>  	wait $fsstress_pid
>  }
> diff --git a/tests/btrfs/192 b/tests/btrfs/192
> index ea261b34..80588a3c 100755
> --- a/tests/btrfs/192
> +++ b/tests/btrfs/192
> @@ -140,7 +140,7 @@ pid1=$!
>  delete_workload &
>  pid2=$!
>  
> -"$FSSTRESS_PROG" $fsstress_args > /dev/null &
> +"$FSSTRESS_PROG" $fsstress_args >> $seqres.full &
>  sleep $runtime
>  
>  "$KILLALL_PROG" -q "$FSSTRESS_PROG" &> /dev/null
> diff --git a/tests/btrfs/232 b/tests/btrfs/232
> index 02c7e49d..e8a22f5e 100755
> --- a/tests/btrfs/232
> +++ b/tests/btrfs/232
> @@ -25,7 +25,7 @@ writer()
>  
>  	while true; do
>  		args=`_scale_fsstress_args -p 20 -n 1000 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
> -		$FSSTRESS_PROG $args >/dev/null 2>&1
> +		$FSSTRESS_PROG $args >> $seqres.full
>  	done
>  }
>  
> diff --git a/tests/btrfs/261 b/tests/btrfs/261
> index 50173de3..58fa8e75 100755
> --- a/tests/btrfs/261
> +++ b/tests/btrfs/261
> @@ -36,7 +36,7 @@ prepare_fs()
>  	# Then use fsstress to generate some extra contents.
>  	# Disable setattr related operations, as it may set NODATACOW which will
>  	# not allow us to use btrfs checksum to verify the content.
> -	$FSSTRESS_PROG -f setattr=0 -d $SCRATCH_MNT -w -n 3000 > /dev/null 2>&1
> +	$FSSTRESS_PROG -f setattr=0 -d $SCRATCH_MNT -w -n 3000 >> $seqres.full
>  	sync
>  
>  	# Save the fssum of this fs
> diff --git a/tests/btrfs/286 b/tests/btrfs/286
> index f1ee129c..71f6d4bd 100755
> --- a/tests/btrfs/286
> +++ b/tests/btrfs/286
> @@ -36,7 +36,7 @@ workload()
>  	# Use nodatasum mount option, so all data won't have checksum.
>  	_scratch_mount -o nodatasum
>  
> -	$FSSTRESS_PROG -p 10 -n 200 -d $SCRATCH_MNT > /dev/null 2>&1
> +	$FSSTRESS_PROG -p 10 -n 200 -d $SCRATCH_MNT >> $seqres.full
>  	sync
>  
>  	# Generate fssum for later verification, here we only care
> diff --git a/tests/ext4/057 b/tests/ext4/057
> index 4006a07c..6babedb2 100755
> --- a/tests/ext4/057
> +++ b/tests/ext4/057
> @@ -42,7 +42,7 @@ _scratch_mount
>  
>  # Begin fsstress while modifying UUID
>  fsstress_args=$(_scale_fsstress_args -d $SCRATCH_MNT -p 15 -n 999999)
> -$FSSTRESS_PROG $fsstress_args > /dev/null 2>&1 &
> +$FSSTRESS_PROG $fsstress_args >> $seqres.full &
>  fsstress_pid=$!
>  
>  for n in $(seq 1 20); do
> diff --git a/tests/ext4/307 b/tests/ext4/307
> index db83a083..8b1cfc9e 100755
> --- a/tests/ext4/307
> +++ b/tests/ext4/307
> @@ -21,7 +21,7 @@ _workout()
>  	out=$SCRATCH_MNT/fsstress.$$
>  	args=`_scale_fsstress_args -p4 -n999 -f setattr=1 $FSSTRESS_AVOID -d $out`
>  	echo "fsstress $args" >> $seqres.full
> -	$FSSTRESS_PROG $args > /dev/null 2>&1
> +	$FSSTRESS_PROG $args >> $seqres.full
>  	find $out -type f > $out.list
>  	cat $out.list | xargs  md5sum > $out.md5sum
>  	usage=`du -sch $out | tail -n1 | gawk '{ print $1 }'`
> diff --git a/tests/generic/068 b/tests/generic/068
> index eeddf6d1..af527fee 100755
> --- a/tests/generic/068
> +++ b/tests/generic/068
> @@ -57,7 +57,7 @@ touch $tmp.running
>        # We do both read & write IO - not only is this more realistic,
>        # but it also potentially tests atime updates
>        FSSTRESS_ARGS=`_scale_fsstress_args -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID`
> -      $FSSTRESS_PROG $FSSTRESS_ARGS > /dev/null 2>&1
> +      $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full
>      done
>  
>      rm -r $STRESS_DIR/*
> diff --git a/tests/generic/269 b/tests/generic/269
> index 838e696d..b852f6bf 100755
> --- a/tests/generic/269
> +++ b/tests/generic/269
> @@ -23,7 +23,7 @@ _workout()
>  	out=$SCRATCH_MNT/fsstress.$$
>  	args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out`
>  	echo "fsstress $args" >> $seqres.full
> -	$FSSTRESS_PROG $args > /dev/null 2>&1 &
> +	$FSSTRESS_PROG $args >> $seqres.full &
>  	pid=$!
>  	echo "Run dd writers in parallel"
>  	for ((i=0; i < num_iterations; i++))
> diff --git a/tests/generic/409 b/tests/generic/409
> index 7a5004ed..432befac 100755
> --- a/tests/generic/409
> +++ b/tests/generic/409
> @@ -58,7 +58,7 @@ fs_stress()
>  		       -f chown=1 \
>  		       -f getdents=1 \
>  		       -f fiemap=1 \
> -		       -d $target >/dev/null
> +		       -d $target >>$seqres.full
>  	sync
>  }
>  
> diff --git a/tests/generic/410 b/tests/generic/410
> index f35f2f4a..8cc36d9f 100755
> --- a/tests/generic/410
> +++ b/tests/generic/410
> @@ -66,7 +66,7 @@ fs_stress()
>  		       -f chown=1 \
>  		       -f getdents=1 \
>  		       -f fiemap=1 \
> -		       -d $target >/dev/null
> +		       -d $target >>$seqres.full
>  	sync
>  }
>  
> diff --git a/tests/generic/411 b/tests/generic/411
> index 9852a49d..b2b8d550 100755
> --- a/tests/generic/411
> +++ b/tests/generic/411
> @@ -49,7 +49,7 @@ fs_stress()
>  		       -f chown=1 \
>  		       -f getdents=1 \
>  		       -f fiemap=1 \
> -		       -d $target >/dev/null
> +		       -d $target >>$seqres.full
>  	sync
>  }
>  
> diff --git a/tests/generic/589 b/tests/generic/589
> index c03cf1fc..bfc7407a 100755
> --- a/tests/generic/589
> +++ b/tests/generic/589
> @@ -48,7 +48,7 @@ fs_stress()
>  {
>  	local target=$1
>  
> -	$FSSTRESS_PROG -n 50 -p 3 -d $target >/dev/null
> +	$FSSTRESS_PROG -n 50 -p 3 -d $target >>$seqres.full
>  	sync
>  }
>  
> diff --git a/tests/xfs/051 b/tests/xfs/051
> index ea70cb50..1c670964 100755
> --- a/tests/xfs/051
> +++ b/tests/xfs/051
> @@ -38,7 +38,7 @@ _scratch_mount
>  
>  # Start a workload and shutdown the fs. The subsequent mount will require log
>  # recovery.
> -$FSSTRESS_PROG -n 9999 -p 2 -w -d $SCRATCH_MNT > /dev/null 2>&1 &
> +$FSSTRESS_PROG -n 9999 -p 2 -w -d $SCRATCH_MNT >> $seqres.full &
>  sleep 5
>  _scratch_shutdown -f
>  $KILLALL_PROG -q $FSSTRESS_PROG
> diff --git a/tests/xfs/057 b/tests/xfs/057
> index 9fb3f406..6af14c80 100755
> --- a/tests/xfs/057
> +++ b/tests/xfs/057
> @@ -56,7 +56,7 @@ _scratch_mkfs_sized $((1024 * 1024 * 500)) >> $seqres.full 2>&1 ||
>  _scratch_mount
>  
>  # populate the fs with some data and cycle the mount to reset the log head/tail
> -$FSSTRESS_PROG -d $SCRATCH_MNT -z -fcreat=1 -p 4 -n 100000 > /dev/null 2>&1
> +$FSSTRESS_PROG -d $SCRATCH_MNT -z -fcreat=1 -p 4 -n 100000 >> $seqres.full
>  _scratch_cycle_mount || _fail "cycle mount failed"
>  
>  # Pin the tail and start a file removal workload. File removal tends to
> diff --git a/tests/xfs/297 b/tests/xfs/297
> index 07f84c25..1d101876 100755
> --- a/tests/xfs/297
> +++ b/tests/xfs/297
> @@ -39,7 +39,7 @@ _scratch_mount
>  STRESS_DIR="$SCRATCH_MNT/testdir"
>  mkdir -p $STRESS_DIR
>  
> -$FSSTRESS_PROG -d $STRESS_DIR -n 100 -p 1000 $FSSTRESS_AVOID >/dev/null 2>&1 &
> +$FSSTRESS_PROG -d $STRESS_DIR -n 100 -p 1000 $FSSTRESS_AVOID >>$seqres.full &
>  
>  # Freeze/unfreeze file system randomly
>  echo "Start freeze/unfreeze randomly" | tee -a $seqres.full
> diff --git a/tests/xfs/305 b/tests/xfs/305
> index 41c7b7f8..d8a6712e 100755
> --- a/tests/xfs/305
> +++ b/tests/xfs/305
> @@ -36,7 +36,7 @@ _exercise()
>  	_qmount
>  	mkdir -p $QUOTA_DIR
>  
> -	$FSSTRESS_PROG -d $QUOTA_DIR -n 1000000 -p 100 $FSSTRESS_AVOID >/dev/null 2>&1 &
> +	$FSSTRESS_PROG -d $QUOTA_DIR -n 1000000 -p 100 $FSSTRESS_AVOID >>$seqres.full &
>  	sleep 10
>  	$XFS_QUOTA_PROG -x -c "disable -$type" $SCRATCH_DEV
>  	sleep 5
> diff --git a/tests/xfs/538 b/tests/xfs/538
> index 2b5e97e5..0b5772a1 100755
> --- a/tests/xfs/538
> +++ b/tests/xfs/538
> @@ -63,7 +63,7 @@ $FSSTRESS_PROG -d $SCRATCH_MNT \
>  		-f readv=0 \
>  		-f stat=0 \
>  		-f aread=0 \
> -		-f dread=0 > /dev/null 2>&1
> +		-f dread=0 >> $seqres.full
>  
>  # success, all done
>  status=0
> -- 
> 2.40.1
>
diff mbox series

Patch

diff --git a/tests/btrfs/028 b/tests/btrfs/028
index fe0678f8..4637469c 100755
--- a/tests/btrfs/028
+++ b/tests/btrfs/028
@@ -35,7 +35,7 @@  args=`_scale_fsstress_args -z \
 	-f fsync=10 -n 100000 -p 2 \
 	-d $SCRATCH_MNT/stress_dir`
 echo "Run fsstress $args" >>$seqres.full
-$FSSTRESS_PROG $args >/dev/null 2>&1 &
+$FSSTRESS_PROG $args >>$seqres.full &
 fsstress_pid=$!
 
 echo "Start balance" >>$seqres.full
diff --git a/tests/btrfs/049 b/tests/btrfs/049
index 9569c141..c48e4087 100755
--- a/tests/btrfs/049
+++ b/tests/btrfs/049
@@ -42,7 +42,7 @@  args=`_scale_fsstress_args -z \
 	-f write=10 -f creat=10 \
 	-n 1000 -p 2 -d $SCRATCH_MNT/stress_dir`
 echo "Run fsstress $args" >>$seqres.full
-$FSSTRESS_PROG $args >/dev/null 2>&1
+$FSSTRESS_PROG $args >>$seqres.full
 
 # Start and pause balance to ensure it will be restored on remount
 echo "Start balance" >>$seqres.full
diff --git a/tests/btrfs/060 b/tests/btrfs/060
index 7dd4d2af..a0184891 100755
--- a/tests/btrfs/060
+++ b/tests/btrfs/060
@@ -38,7 +38,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start balance worker: " >>$seqres.full
diff --git a/tests/btrfs/061 b/tests/btrfs/061
index 55f5625b..c1010413 100755
--- a/tests/btrfs/061
+++ b/tests/btrfs/061
@@ -36,7 +36,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start balance worker: " >>$seqres.full
diff --git a/tests/btrfs/062 b/tests/btrfs/062
index 10f95111..818a0156 100755
--- a/tests/btrfs/062
+++ b/tests/btrfs/062
@@ -37,7 +37,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start balance worker: " >>$seqres.full
diff --git a/tests/btrfs/063 b/tests/btrfs/063
index cef80771..2f771baf 100755
--- a/tests/btrfs/063
+++ b/tests/btrfs/063
@@ -36,7 +36,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start balance worker: " >>$seqres.full
diff --git a/tests/btrfs/064 b/tests/btrfs/064
index f29e68ba..e9b46ce6 100755
--- a/tests/btrfs/064
+++ b/tests/btrfs/064
@@ -46,7 +46,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	# Start both balance and replace in the background.
diff --git a/tests/btrfs/065 b/tests/btrfs/065
index b6c9dbad..c4b6aafe 100755
--- a/tests/btrfs/065
+++ b/tests/btrfs/065
@@ -46,7 +46,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	# make sure the stop sign is not there
diff --git a/tests/btrfs/066 b/tests/btrfs/066
index 8d12af61..a29034bb 100755
--- a/tests/btrfs/066
+++ b/tests/btrfs/066
@@ -38,7 +38,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	# make sure the stop sign is not there
diff --git a/tests/btrfs/067 b/tests/btrfs/067
index 970a23c4..709db155 100755
--- a/tests/btrfs/067
+++ b/tests/btrfs/067
@@ -39,7 +39,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	# make sure the stop sign is not there
diff --git a/tests/btrfs/068 b/tests/btrfs/068
index e0bcc2ac..15fd41db 100755
--- a/tests/btrfs/068
+++ b/tests/btrfs/068
@@ -39,7 +39,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	# make sure the stop sign is not there
diff --git a/tests/btrfs/069 b/tests/btrfs/069
index 6e798a2e..139dde48 100755
--- a/tests/btrfs/069
+++ b/tests/btrfs/069
@@ -44,7 +44,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start replace worker: " >>$seqres.full
diff --git a/tests/btrfs/070 b/tests/btrfs/070
index f2e61ad3..54aa275c 100755
--- a/tests/btrfs/070
+++ b/tests/btrfs/070
@@ -45,7 +45,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start replace worker: " >>$seqres.full
diff --git a/tests/btrfs/071 b/tests/btrfs/071
index 40230b11..6ebbd8cc 100755
--- a/tests/btrfs/071
+++ b/tests/btrfs/071
@@ -44,7 +44,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start replace worker: " >>$seqres.full
diff --git a/tests/btrfs/072 b/tests/btrfs/072
index bcb0ea25..4b6b6fb5 100755
--- a/tests/btrfs/072
+++ b/tests/btrfs/072
@@ -37,7 +37,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start scrub worker: " >>$seqres.full
diff --git a/tests/btrfs/073 b/tests/btrfs/073
index 26c5deb6..b1604f94 100755
--- a/tests/btrfs/073
+++ b/tests/btrfs/073
@@ -36,7 +36,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start scrub worker: " >>$seqres.full
diff --git a/tests/btrfs/074 b/tests/btrfs/074
index 92e25c7c..9b22c620 100755
--- a/tests/btrfs/074
+++ b/tests/btrfs/074
@@ -37,7 +37,7 @@  run_test()
 
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 
 	echo -n "Start defrag worker: " >>$seqres.full
diff --git a/tests/btrfs/136 b/tests/btrfs/136
index b9ab8270..70e836a5 100755
--- a/tests/btrfs/136
+++ b/tests/btrfs/136
@@ -39,7 +39,7 @@  populate_data(){
 	mkdir -p $data_path
 	args=`_scale_fsstress_args -p 20 -n 100 $FSSTRESS_AVOID -d $data_path`
 	echo "Run fsstress $args" >>$seqres.full
-	$FSSTRESS_PROG $args >/dev/null 2>&1 &
+	$FSSTRESS_PROG $args >>$seqres.full &
 	fsstress_pid=$!
 	wait $fsstress_pid
 }
diff --git a/tests/btrfs/192 b/tests/btrfs/192
index ea261b34..80588a3c 100755
--- a/tests/btrfs/192
+++ b/tests/btrfs/192
@@ -140,7 +140,7 @@  pid1=$!
 delete_workload &
 pid2=$!
 
-"$FSSTRESS_PROG" $fsstress_args > /dev/null &
+"$FSSTRESS_PROG" $fsstress_args >> $seqres.full &
 sleep $runtime
 
 "$KILLALL_PROG" -q "$FSSTRESS_PROG" &> /dev/null
diff --git a/tests/btrfs/232 b/tests/btrfs/232
index 02c7e49d..e8a22f5e 100755
--- a/tests/btrfs/232
+++ b/tests/btrfs/232
@@ -25,7 +25,7 @@  writer()
 
 	while true; do
 		args=`_scale_fsstress_args -p 20 -n 1000 $FSSTRESS_AVOID -d $SCRATCH_MNT/stressdir`
-		$FSSTRESS_PROG $args >/dev/null 2>&1
+		$FSSTRESS_PROG $args >> $seqres.full
 	done
 }
 
diff --git a/tests/btrfs/261 b/tests/btrfs/261
index 50173de3..58fa8e75 100755
--- a/tests/btrfs/261
+++ b/tests/btrfs/261
@@ -36,7 +36,7 @@  prepare_fs()
 	# Then use fsstress to generate some extra contents.
 	# Disable setattr related operations, as it may set NODATACOW which will
 	# not allow us to use btrfs checksum to verify the content.
-	$FSSTRESS_PROG -f setattr=0 -d $SCRATCH_MNT -w -n 3000 > /dev/null 2>&1
+	$FSSTRESS_PROG -f setattr=0 -d $SCRATCH_MNT -w -n 3000 >> $seqres.full
 	sync
 
 	# Save the fssum of this fs
diff --git a/tests/btrfs/286 b/tests/btrfs/286
index f1ee129c..71f6d4bd 100755
--- a/tests/btrfs/286
+++ b/tests/btrfs/286
@@ -36,7 +36,7 @@  workload()
 	# Use nodatasum mount option, so all data won't have checksum.
 	_scratch_mount -o nodatasum
 
-	$FSSTRESS_PROG -p 10 -n 200 -d $SCRATCH_MNT > /dev/null 2>&1
+	$FSSTRESS_PROG -p 10 -n 200 -d $SCRATCH_MNT >> $seqres.full
 	sync
 
 	# Generate fssum for later verification, here we only care
diff --git a/tests/ext4/057 b/tests/ext4/057
index 4006a07c..6babedb2 100755
--- a/tests/ext4/057
+++ b/tests/ext4/057
@@ -42,7 +42,7 @@  _scratch_mount
 
 # Begin fsstress while modifying UUID
 fsstress_args=$(_scale_fsstress_args -d $SCRATCH_MNT -p 15 -n 999999)
-$FSSTRESS_PROG $fsstress_args > /dev/null 2>&1 &
+$FSSTRESS_PROG $fsstress_args >> $seqres.full &
 fsstress_pid=$!
 
 for n in $(seq 1 20); do
diff --git a/tests/ext4/307 b/tests/ext4/307
index db83a083..8b1cfc9e 100755
--- a/tests/ext4/307
+++ b/tests/ext4/307
@@ -21,7 +21,7 @@  _workout()
 	out=$SCRATCH_MNT/fsstress.$$
 	args=`_scale_fsstress_args -p4 -n999 -f setattr=1 $FSSTRESS_AVOID -d $out`
 	echo "fsstress $args" >> $seqres.full
-	$FSSTRESS_PROG $args > /dev/null 2>&1
+	$FSSTRESS_PROG $args >> $seqres.full
 	find $out -type f > $out.list
 	cat $out.list | xargs  md5sum > $out.md5sum
 	usage=`du -sch $out | tail -n1 | gawk '{ print $1 }'`
diff --git a/tests/generic/068 b/tests/generic/068
index eeddf6d1..af527fee 100755
--- a/tests/generic/068
+++ b/tests/generic/068
@@ -57,7 +57,7 @@  touch $tmp.running
       # We do both read & write IO - not only is this more realistic,
       # but it also potentially tests atime updates
       FSSTRESS_ARGS=`_scale_fsstress_args -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID`
-      $FSSTRESS_PROG $FSSTRESS_ARGS > /dev/null 2>&1
+      $FSSTRESS_PROG $FSSTRESS_ARGS >>$seqres.full
     done
 
     rm -r $STRESS_DIR/*
diff --git a/tests/generic/269 b/tests/generic/269
index 838e696d..b852f6bf 100755
--- a/tests/generic/269
+++ b/tests/generic/269
@@ -23,7 +23,7 @@  _workout()
 	out=$SCRATCH_MNT/fsstress.$$
 	args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out`
 	echo "fsstress $args" >> $seqres.full
-	$FSSTRESS_PROG $args > /dev/null 2>&1 &
+	$FSSTRESS_PROG $args >> $seqres.full &
 	pid=$!
 	echo "Run dd writers in parallel"
 	for ((i=0; i < num_iterations; i++))
diff --git a/tests/generic/409 b/tests/generic/409
index 7a5004ed..432befac 100755
--- a/tests/generic/409
+++ b/tests/generic/409
@@ -58,7 +58,7 @@  fs_stress()
 		       -f chown=1 \
 		       -f getdents=1 \
 		       -f fiemap=1 \
-		       -d $target >/dev/null
+		       -d $target >>$seqres.full
 	sync
 }
 
diff --git a/tests/generic/410 b/tests/generic/410
index f35f2f4a..8cc36d9f 100755
--- a/tests/generic/410
+++ b/tests/generic/410
@@ -66,7 +66,7 @@  fs_stress()
 		       -f chown=1 \
 		       -f getdents=1 \
 		       -f fiemap=1 \
-		       -d $target >/dev/null
+		       -d $target >>$seqres.full
 	sync
 }
 
diff --git a/tests/generic/411 b/tests/generic/411
index 9852a49d..b2b8d550 100755
--- a/tests/generic/411
+++ b/tests/generic/411
@@ -49,7 +49,7 @@  fs_stress()
 		       -f chown=1 \
 		       -f getdents=1 \
 		       -f fiemap=1 \
-		       -d $target >/dev/null
+		       -d $target >>$seqres.full
 	sync
 }
 
diff --git a/tests/generic/589 b/tests/generic/589
index c03cf1fc..bfc7407a 100755
--- a/tests/generic/589
+++ b/tests/generic/589
@@ -48,7 +48,7 @@  fs_stress()
 {
 	local target=$1
 
-	$FSSTRESS_PROG -n 50 -p 3 -d $target >/dev/null
+	$FSSTRESS_PROG -n 50 -p 3 -d $target >>$seqres.full
 	sync
 }
 
diff --git a/tests/xfs/051 b/tests/xfs/051
index ea70cb50..1c670964 100755
--- a/tests/xfs/051
+++ b/tests/xfs/051
@@ -38,7 +38,7 @@  _scratch_mount
 
 # Start a workload and shutdown the fs. The subsequent mount will require log
 # recovery.
-$FSSTRESS_PROG -n 9999 -p 2 -w -d $SCRATCH_MNT > /dev/null 2>&1 &
+$FSSTRESS_PROG -n 9999 -p 2 -w -d $SCRATCH_MNT >> $seqres.full &
 sleep 5
 _scratch_shutdown -f
 $KILLALL_PROG -q $FSSTRESS_PROG
diff --git a/tests/xfs/057 b/tests/xfs/057
index 9fb3f406..6af14c80 100755
--- a/tests/xfs/057
+++ b/tests/xfs/057
@@ -56,7 +56,7 @@  _scratch_mkfs_sized $((1024 * 1024 * 500)) >> $seqres.full 2>&1 ||
 _scratch_mount
 
 # populate the fs with some data and cycle the mount to reset the log head/tail
-$FSSTRESS_PROG -d $SCRATCH_MNT -z -fcreat=1 -p 4 -n 100000 > /dev/null 2>&1
+$FSSTRESS_PROG -d $SCRATCH_MNT -z -fcreat=1 -p 4 -n 100000 >> $seqres.full
 _scratch_cycle_mount || _fail "cycle mount failed"
 
 # Pin the tail and start a file removal workload. File removal tends to
diff --git a/tests/xfs/297 b/tests/xfs/297
index 07f84c25..1d101876 100755
--- a/tests/xfs/297
+++ b/tests/xfs/297
@@ -39,7 +39,7 @@  _scratch_mount
 STRESS_DIR="$SCRATCH_MNT/testdir"
 mkdir -p $STRESS_DIR
 
-$FSSTRESS_PROG -d $STRESS_DIR -n 100 -p 1000 $FSSTRESS_AVOID >/dev/null 2>&1 &
+$FSSTRESS_PROG -d $STRESS_DIR -n 100 -p 1000 $FSSTRESS_AVOID >>$seqres.full &
 
 # Freeze/unfreeze file system randomly
 echo "Start freeze/unfreeze randomly" | tee -a $seqres.full
diff --git a/tests/xfs/305 b/tests/xfs/305
index 41c7b7f8..d8a6712e 100755
--- a/tests/xfs/305
+++ b/tests/xfs/305
@@ -36,7 +36,7 @@  _exercise()
 	_qmount
 	mkdir -p $QUOTA_DIR
 
-	$FSSTRESS_PROG -d $QUOTA_DIR -n 1000000 -p 100 $FSSTRESS_AVOID >/dev/null 2>&1 &
+	$FSSTRESS_PROG -d $QUOTA_DIR -n 1000000 -p 100 $FSSTRESS_AVOID >>$seqres.full &
 	sleep 10
 	$XFS_QUOTA_PROG -x -c "disable -$type" $SCRATCH_DEV
 	sleep 5
diff --git a/tests/xfs/538 b/tests/xfs/538
index 2b5e97e5..0b5772a1 100755
--- a/tests/xfs/538
+++ b/tests/xfs/538
@@ -63,7 +63,7 @@  $FSSTRESS_PROG -d $SCRATCH_MNT \
 		-f readv=0 \
 		-f stat=0 \
 		-f aread=0 \
-		-f dread=0 > /dev/null 2>&1
+		-f dread=0 >> $seqres.full
 
 # success, all done
 status=0