@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
source "drivers/gpu/drm/renesas/rcar-du/Kconfig"
+source "drivers/gpu/drm/renesas/rz-du/Kconfig"
source "drivers/gpu/drm/renesas/shmobile/Kconfig"
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += rcar-du/
+obj-y += rz-du/
obj-$(CONFIG_DRM_SHMOBILE) += shmobile/
new file mode 100644
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_RZG2L_DU
+ tristate "DRM Support for RZ/G2L Display Unit"
+ depends on ARCH_RZG2L || COMPILE_TEST
+ depends on DRM && OF
+ depends on VIDEO_RENESAS_VSP1
+ select DRM_GEM_DMA_HELPER
+ select DRM_KMS_HELPER
+ select VIDEOMODE_HELPERS
+ help
+ Choose this option if you have an RZ/G2L alike chipset.
+ If M is selected the module will be called rzg2l-du-drm.
new file mode 100644
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+rzg2l-du-drm-y := rzg2l_du_crtc.o \
+ rzg2l_du_drv.o \
+ rzg2l_du_encoder.o \
+ rzg2l_du_kms.o \
+
+rzg2l-du-drm-$(CONFIG_VIDEO_RENESAS_VSP1) += rzg2l_du_vsp.o
+obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o
new file mode 100644
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.c
+ */
+
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+#define DU_MCR0 0x00
+#define DU_MCR0_DPI_OE BIT(0)
+#define DU_MCR0_DI_EN BIT(8)
+#define DU_MCR0_PB_CLR BIT(16)
+
+#define DU_DITR0 0x10
+#define DU_DITR0_DPI_CLKMD BIT(0)
+#define DU_DITR0_DEMD_LOW 0x0
+#define DU_DITR0_DEMD_HIGH (BIT(8) | BIT(9))
+#define DU_DITR0_VSPOL BIT(16)
+#define DU_DITR0_HSPOL BIT(17)
+
+#define DU_DITR1 0x14
+#define DU_DITR1_VSA(x) ((x) << 0)
+#define DU_DITR1_VACTIVE(x) ((x) << 16)
+
+#define DU_DITR2 0x18
+#define DU_DITR2_VBP(x) ((x) << 0)
+#define DU_DITR2_VFP(x) ((x) << 16)
+
+#define DU_DITR3 0x1c
+#define DU_DITR3_HSA(x) ((x) << 0)
+#define DU_DITR3_HACTIVE(x) ((x) << 16)
+
+#define DU_DITR4 0x20
+#define DU_DITR4_HBP(x) ((x) << 0)
+#define DU_DITR4_HFP(x) ((x) << 16)
+
+#define DU_MCR1 0x40
+#define DU_MCR1_PB_AUTOCLR BIT(16)
+
+#define DU_PBCR0 0x4c
+#define DU_PBCR0_PB_DEP(x) ((x) << 0)
+
+static inline void rzg2l_du_write(struct rzg2l_du_device *rcdu, u32 reg, u32 data)
+{
+ writel(data, rcdu->mmio + reg);
+}
+
+/* -----------------------------------------------------------------------------
+ * Hardware Setup
+ */
+
+static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc *rcrtc)
+{
+ const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
+ unsigned long mode_clock = mode->clock * 1000;
+ u32 ditr0, ditr1, ditr2, ditr3, ditr4, pbcr0;
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+ clk_prepare_enable(rcrtc->rzg2l_clocks.dclk);
+ clk_set_rate(rcrtc->rzg2l_clocks.dclk, mode_clock);
+
+ ditr0 = (DU_DITR0_DEMD_HIGH
+ | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL : 0)
+ | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL : 0));
+
+ ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start)
+ | DU_DITR1_VACTIVE(mode->vdisplay);
+
+ ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end)
+ | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay);
+
+ ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start)
+ | DU_DITR3_HACTIVE(mode->hdisplay);
+
+ ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end)
+ | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay);
+
+ pbcr0 = DU_PBCR0_PB_DEP(0x1f);
+
+ rzg2l_du_write(rcdu, DU_DITR0, ditr0);
+ rzg2l_du_write(rcdu, DU_DITR1, ditr1);
+ rzg2l_du_write(rcdu, DU_DITR2, ditr2);
+ rzg2l_du_write(rcdu, DU_DITR3, ditr3);
+ rzg2l_du_write(rcdu, DU_DITR4, ditr4);
+ rzg2l_du_write(rcdu, DU_PBCR0, pbcr0);
+
+ /* Enable auto clear */
+ rzg2l_du_write(rcdu, DU_MCR1, DU_MCR1_PB_AUTOCLR);
+}
+
+/* -----------------------------------------------------------------------------
+ * Page Flip
+ */
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_pending_vblank_event *event;
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = rcrtc->event;
+ rcrtc->event = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ if (!event)
+ return;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ drm_crtc_send_vblank_event(&rcrtc->crtc, event);
+ wake_up(&rcrtc->flip_wait);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ drm_crtc_vblank_put(&rcrtc->crtc);
+}
+
+static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+ bool pending;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ pending = rcrtc->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ return pending;
+}
+
+static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc)
+{
+ struct rzg2l_du_device *rcdu = rcrtc->dev;
+
+ if (wait_event_timeout(rcrtc->flip_wait,
+ !rzg2l_du_crtc_page_flip_pending(rcrtc),
+ msecs_to_jiffies(50)))
+ return;
+
+ dev_warn(rcdu->dev, "page flip timeout\n");
+
+ rzg2l_du_crtc_finish_page_flip(rcrtc);
+}
+
+/* -----------------------------------------------------------------------------
+ * Start/Stop and Suspend/Resume
+ */
+
+static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc)
+{
+ /* Configure display timings and output routing */
+ rzg2l_du_crtc_set_display_timing(rcrtc);
+
+ /* Enable the VSP compositor. */
+ rzg2l_du_vsp_enable(rcrtc);
+
+ /* Turn vertical blanking interrupt reporting on. */
+ drm_crtc_vblank_on(&rcrtc->crtc);
+}
+
+static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc)
+{
+ int ret;
+
+ /*
+ * Guard against double-get, as the function is called from both the
+ * .atomic_enable() and .atomic_flush() handlers.
+ */
+ if (rcrtc->initialized)
+ return 0;
+
+ ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk);
+ if (ret < 0)
+ goto error_bus_clock;
+
+ ret = reset_control_deassert(rcrtc->rstc);
+ if (ret < 0)
+ goto error_peri_clock;
+
+ rzg2l_du_crtc_setup(rcrtc);
+ rcrtc->initialized = true;
+
+ return 0;
+
+error_peri_clock:
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+error_bus_clock:
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+ return ret;
+}
+
+static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc)
+{
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk);
+ reset_control_assert(rcrtc->rstc);
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk);
+ clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk);
+
+ rcrtc->initialized = false;
+}
+
+static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start)
+{
+ rzg2l_du_write(rcrtc->dev, DU_MCR0, start ? DU_MCR0_DI_EN : 0);
+}
+
+static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc)
+{
+ rzg2l_du_start_stop(rcrtc, true);
+}
+
+static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc)
+{
+ struct drm_crtc *crtc = &rcrtc->crtc;
+
+ /*
+ * Disable vertical blanking interrupt reporting. We first need to wait
+ * for page flip completion before stopping the CRTC as userspace
+ * expects page flips to eventually complete.
+ */
+ rzg2l_du_crtc_wait_page_flip(rcrtc);
+ drm_crtc_vblank_off(crtc);
+
+ /* Disable the VSP compositor. */
+ rzg2l_du_vsp_disable(rcrtc);
+
+ rzg2l_du_start_stop(rcrtc, false);
+}
+
+/* -----------------------------------------------------------------------------
+ * CRTC Functions
+ */
+
+static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rzg2l_du_crtc_get(rcrtc);
+
+ rzg2l_du_crtc_start(rcrtc);
+}
+
+static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rzg2l_du_crtc_stop(rcrtc);
+ rzg2l_du_crtc_put(rcrtc);
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (crtc->state->event) {
+ drm_crtc_send_vblank_event(crtc, crtc->state->event);
+ crtc->state->event = NULL;
+ }
+ spin_unlock_irq(&crtc->dev->event_lock);
+}
+
+static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_atomic_state *state)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+ struct drm_device *dev = rcrtc->crtc.dev;
+ unsigned long flags;
+
+ WARN_ON(!crtc->state->enable);
+
+ /*
+ * If a mode set is in progress we can be called with the CRTC disabled.
+ * We thus need to first get and setup the CRTC in order to configure
+ * planes. We must *not* put the CRTC, as it must be kept awake until
+ * the .atomic_enable() call that will follow. The get operation in
+ * .atomic_enable() will in that case be a no-op, and the CRTC will be
+ * put later in .atomic_disable().
+ */
+ rzg2l_du_crtc_get(rcrtc);
+
+ if (crtc->state->event) {
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ rcrtc->event = crtc->state->event;
+ crtc->state->event = NULL;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ }
+
+ rzg2l_du_vsp_atomic_flush(rcrtc);
+}
+
+static const struct drm_crtc_helper_funcs crtc_helper_funcs = {
+ .atomic_flush = rzg2l_du_crtc_atomic_flush,
+ .atomic_enable = rzg2l_du_crtc_atomic_enable,
+ .atomic_disable = rzg2l_du_crtc_atomic_disable,
+};
+
+static struct drm_crtc_state *
+rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc_state *state;
+ struct rzg2l_du_crtc_state *copy;
+
+ if (WARN_ON(!crtc->state))
+ return NULL;
+
+ state = to_rzg2l_crtc_state(crtc->state);
+ copy = kmemdup(state, sizeof(*state), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_crtc_duplicate_state(crtc, ©->state);
+
+ return ©->state;
+}
+
+static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ __drm_atomic_helper_crtc_destroy_state(state);
+ kfree(to_rzg2l_crtc_state(state));
+}
+
+static void rzg2l_du_crtc_reset(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc_state *state;
+
+ if (crtc->state) {
+ rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state);
+ crtc->state = NULL;
+ }
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ __drm_atomic_helper_crtc_reset(crtc, &state->state);
+}
+
+static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rcrtc->vblank_enable = true;
+
+ return 0;
+}
+
+static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+ struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc);
+
+ rcrtc->vblank_enable = false;
+}
+
+static const struct drm_crtc_funcs crtc_funcs_rz = {
+ .reset = rzg2l_du_crtc_reset,
+ .destroy = drm_crtc_cleanup,
+ .set_config = drm_atomic_helper_set_config,
+ .page_flip = drm_atomic_helper_page_flip,
+ .atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state,
+ .atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state,
+ .enable_vblank = rzg2l_du_crtc_enable_vblank,
+ .disable_vblank = rzg2l_du_crtc_disable_vblank,
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu)
+{
+ struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0];
+ struct drm_crtc *crtc = &rcrtc->crtc;
+ struct drm_plane *primary;
+ int ret;
+
+ rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL);
+ if (IS_ERR(rcrtc->rstc)) {
+ dev_err(rcdu->dev, "can't get cpg reset\n");
+ return PTR_ERR(rcrtc->rstc);
+ }
+
+ rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) {
+ dev_err(rcdu->dev, "no axi clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.aclk);
+ }
+
+ rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) {
+ dev_err(rcdu->dev, "no peripheral clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.pclk);
+ }
+
+ rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk");
+ if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) {
+ dev_err(rcdu->dev, "no video clock for DU\n");
+ return PTR_ERR(rcrtc->rzg2l_clocks.dclk);
+ }
+
+ init_waitqueue_head(&rcrtc->flip_wait);
+ rcrtc->dev = rcdu;
+
+ primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane;
+
+ ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL,
+ &crtc_funcs_rz, NULL);
+ if (ret < 0)
+ return ret;
+
+ drm_crtc_helper_add(crtc, &crtc_helper_funcs);
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit CRTCs
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_crtc.h
+ */
+
+#ifndef __RZG2L_DU_CRTC_H__
+#define __RZG2L_DU_CRTC_H__
+
+#include <linux/container_of.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_writeback.h>
+
+#include <media/vsp1.h>
+
+struct clk;
+struct reset_control;
+struct rzg2l_du_vsp;
+struct rzg2l_du_format_info;
+
+/**
+ * struct rzg2l_du_crtc - the CRTC, representing a DU superposition processor
+ * @crtc: base DRM CRTC
+ * @dev: the DU device
+ * @initialized: whether the CRTC has been initialized and clocks enabled
+ * @vblank_enable: whether vblank events are enabled on this CRTC
+ * @event: event to post when the pending page flip completes
+ * @flip_wait: wait queue used to signal page flip completion
+ * @vsp: VSP feeding video to this CRTC
+ * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC
+ * @rstc: reset controller
+ * @rzg2l_clocks: the bus, main and video clock
+ */
+struct rzg2l_du_crtc {
+ struct drm_crtc crtc;
+
+ struct rzg2l_du_device *dev;
+ bool initialized;
+
+ bool vblank_enable;
+ struct drm_pending_vblank_event *event;
+ wait_queue_head_t flip_wait;
+
+ struct rzg2l_du_vsp *vsp;
+ unsigned int vsp_pipe;
+
+ const char *const *sources;
+ unsigned int sources_count;
+
+ struct reset_control *rstc;
+ struct {
+ struct clk *aclk;
+ struct clk *pclk;
+ struct clk *dclk;
+ } rzg2l_clocks;
+};
+
+static inline struct rzg2l_du_crtc *to_rzg2l_crtc(struct drm_crtc *c)
+{
+ return container_of(c, struct rzg2l_du_crtc, crtc);
+}
+
+/**
+ * struct rzg2l_du_crtc_state - Driver-specific CRTC state
+ * @state: base DRM CRTC state
+ * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by this CRTC
+ */
+struct rzg2l_du_crtc_state {
+ struct drm_crtc_state state;
+ unsigned int outputs;
+};
+
+static inline struct rzg2l_du_crtc_state *to_rzg2l_crtc_state(struct drm_crtc_state *s)
+{
+ return container_of(s, struct rzg2l_du_crtc_state, state);
+}
+
+int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu);
+
+void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc);
+
+#endif /* __RZG2L_DU_CRTC_H__ */
new file mode 100644
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.c
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fbdev_generic.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_probe_helper.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+
+/* -----------------------------------------------------------------------------
+ * Device Information
+ */
+
+static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
+ .channels_mask = BIT(0),
+ .routes = {
+ [RZG2L_DU_OUTPUT_DSI0] = {
+ .possible_outputs = BIT(0),
+ .port = 0,
+ },
+ [RZG2L_DU_OUTPUT_DPAD0] = {
+ .possible_outputs = BIT(0),
+ .port = 1,
+ }
+ }
+};
+
+static const struct of_device_id rzg2l_du_of_table[] = {
+ { .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rzg2l_du_of_table);
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output)
+{
+ static const char * const names[] = {
+ [RZG2L_DU_OUTPUT_DSI0] = "DSI0",
+ [RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
+ };
+
+ if (output >= ARRAY_SIZE(names))
+ return "UNKNOWN";
+
+ return names[output];
+}
+
+/* -----------------------------------------------------------------------------
+ * DRM operations
+ */
+
+DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops);
+
+static const struct drm_driver rzg2l_du_driver = {
+ .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+ .dumb_create = rzg2l_du_dumb_create,
+ .gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table,
+ .fops = &rzg2l_du_fops,
+ .name = "rzg2l-du",
+ .desc = "Renesas RZ/G2L Display Unit",
+ .date = "20230410",
+ .major = 1,
+ .minor = 0,
+};
+
+/* -----------------------------------------------------------------------------
+ * Platform driver
+ */
+
+static void rzg2l_du_remove(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+ struct drm_device *ddev = &rcdu->ddev;
+
+ drm_dev_unregister(ddev);
+ drm_atomic_helper_shutdown(ddev);
+
+ drm_kms_helper_poll_fini(ddev);
+}
+
+static void rzg2l_du_shutdown(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev);
+
+ drm_atomic_helper_shutdown(&rcdu->ddev);
+}
+
+static int rzg2l_du_probe(struct platform_device *pdev)
+{
+ struct rzg2l_du_device *rcdu;
+ int ret;
+
+ if (drm_firmware_drivers_only())
+ return -ENODEV;
+
+ /* Allocate and initialize the RZ/G2L device structure. */
+ rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver,
+ struct rzg2l_du_device, ddev);
+ if (IS_ERR(rcdu))
+ return PTR_ERR(rcdu);
+
+ rcdu->dev = &pdev->dev;
+ rcdu->info = of_device_get_match_data(rcdu->dev);
+
+ platform_set_drvdata(pdev, rcdu);
+
+ /* I/O resources */
+ rcdu->mmio = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(rcdu->mmio))
+ return PTR_ERR(rcdu->mmio);
+
+ ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ /* DRM/KMS objects */
+ ret = rzg2l_du_modeset_init(rcdu);
+ if (ret < 0) {
+ /*
+ * Don't use dev_err_probe(), as it would overwrite the probe
+ * deferral reason recorded in rzg2l_du_modeset_init().
+ */
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to initialize DRM/KMS (%d)\n", ret);
+ goto error;
+ }
+
+ /*
+ * Register the DRM device with the core and the connectors with
+ * sysfs.
+ */
+ ret = drm_dev_register(&rcdu->ddev, 0);
+ if (ret)
+ goto error;
+
+ drm_info(&rcdu->ddev, "Device %s probed\n", dev_name(&pdev->dev));
+
+ drm_fbdev_generic_setup(&rcdu->ddev, 32);
+
+ return 0;
+
+error:
+ drm_kms_helper_poll_fini(&rcdu->ddev);
+ return ret;
+}
+
+static struct platform_driver rzg2l_du_platform_driver = {
+ .probe = rzg2l_du_probe,
+ .remove_new = rzg2l_du_remove,
+ .shutdown = rzg2l_du_shutdown,
+ .driver = {
+ .name = "rzg2l-du",
+ .of_match_table = rzg2l_du_of_table,
+ },
+};
+
+module_platform_driver(rzg2l_du_platform_driver);
+
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit DRM driver
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_drv.h
+ */
+
+#ifndef __RZG2L_DU_DRV_H__
+#define __RZG2L_DU_DRV_H__
+
+#include <linux/kernel.h>
+
+#include <drm/drm_device.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_vsp.h"
+
+struct device;
+struct drm_property;
+
+enum rzg2l_du_output {
+ RZG2L_DU_OUTPUT_DSI0,
+ RZG2L_DU_OUTPUT_DPAD0,
+ RZG2L_DU_OUTPUT_MAX,
+};
+
+/*
+ * struct rzg2l_du_output_routing - Output routing specification
+ * @possible_outputs: bitmask of possible outputs
+ * @port: device tree port number corresponding to this output route
+ *
+ * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data
+ * specify the valid SoC outputs, which CRTC can drive the output, and the type
+ * of in-SoC encoder for the output.
+ */
+struct rzg2l_du_output_routing {
+ unsigned int possible_outputs;
+ unsigned int port;
+};
+
+/*
+ * struct rzg2l_du_device_info - DU model-specific information
+ * @channels_mask: bit mask of available DU channels
+ * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*)
+ */
+struct rzg2l_du_device_info {
+ unsigned int channels_mask;
+ struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX];
+};
+
+#define RZG2L_DU_MAX_CRTCS 1
+#define RZG2L_DU_MAX_VSPS 1
+#define RZG2L_DU_MAX_DSI 1
+
+struct rzg2l_du_device {
+ struct device *dev;
+ const struct rzg2l_du_device_info *info;
+
+ void __iomem *mmio;
+
+ struct drm_device ddev;
+
+ struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS];
+ unsigned int num_crtcs;
+
+ struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
+};
+
+static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev)
+{
+ return container_of(dev, struct rzg2l_du_device, ddev);
+}
+
+const char *rzg2l_du_output_name(enum rzg2l_du_output output);
+
+#endif /* __RZG2L_DU_DRV_H__ */
new file mode 100644
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.c
+ */
+
+#include <linux/export.h>
+#include <linux/of.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_bridge_connector.h>
+#include <drm/drm_panel.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+
+/* -----------------------------------------------------------------------------
+ * Encoder
+ */
+
+static const struct drm_encoder_funcs rzg2l_du_encoder_funcs = {
+};
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct device_node *enc_node)
+{
+ struct rzg2l_du_encoder *renc;
+ struct drm_connector *connector;
+ struct drm_bridge *bridge;
+ int ret;
+
+ /* Locate the DRM bridge from the DT node. */
+ bridge = of_drm_find_bridge(enc_node);
+ if (!bridge)
+ return -EPROBE_DEFER;
+
+ dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
+ enc_node, rzg2l_du_output_name(output));
+
+ renc = drmm_encoder_alloc(&rcdu->ddev, struct rzg2l_du_encoder, base,
+ &rzg2l_du_encoder_funcs, DRM_MODE_ENCODER_NONE,
+ NULL);
+ if (IS_ERR(renc))
+ return PTR_ERR(renc);
+
+ renc->output = output;
+
+ /* Attach the bridge to the encoder. */
+ ret = drm_bridge_attach(&renc->base, bridge, NULL,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret) {
+ dev_err(rcdu->dev,
+ "failed to attach bridge %pOF for output %s (%d)\n",
+ bridge->of_node, rzg2l_du_output_name(output), ret);
+ return ret;
+ }
+
+ /* Create the connector for the chain of bridges. */
+ connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base);
+ if (IS_ERR(connector)) {
+ dev_err(rcdu->dev,
+ "failed to created connector for output %s (%ld)\n",
+ rzg2l_du_output_name(output), PTR_ERR(connector));
+ return PTR_ERR(connector);
+ }
+
+ return drm_connector_attach_encoder(connector, &renc->base);
+}
new file mode 100644
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Encoder
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_encoder.h
+ */
+
+#ifndef __RZG2L_DU_ENCODER_H__
+#define __RZG2L_DU_ENCODER_H__
+
+#include <drm/drm_encoder.h>
+#include <linux/container_of.h>
+
+struct rzg2l_du_device;
+
+struct rzg2l_du_encoder {
+ struct drm_encoder base;
+ enum rzg2l_du_output output;
+};
+
+static inline struct rzg2l_du_encoder *to_rzg2l_encoder(struct drm_encoder *e)
+{
+ return container_of(e, struct rzg2l_du_encoder, base);
+}
+
+int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct device_node *enc_node);
+
+#endif /* __RZG2L_DU_ENCODER_H__ */
new file mode 100644
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include "rzg2l_du_crtc.h"
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_encoder.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+/* -----------------------------------------------------------------------------
+ * Format helpers
+ */
+
+static const struct rzg2l_du_format_info rzg2l_du_format_infos[] = {
+ {
+ .fourcc = DRM_FORMAT_XRGB8888,
+ .v4l2 = V4L2_PIX_FMT_XBGR32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_ARGB8888,
+ .v4l2 = V4L2_PIX_FMT_ABGR32,
+ .bpp = 32,
+ .planes = 1,
+ .hsub = 1,
+ }, {
+ .fourcc = DRM_FORMAT_RGB888,
+ .v4l2 = V4L2_PIX_FMT_BGR24,
+ .bpp = 24,
+ .planes = 1,
+ .hsub = 1,
+ }
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(rzg2l_du_format_infos); ++i) {
+ if (rzg2l_du_format_infos[i].fourcc == fourcc)
+ return &rzg2l_du_format_infos[i];
+ }
+
+ return NULL;
+}
+
+/* -----------------------------------------------------------------------------
+ * Frame buffer
+ */
+
+static const struct drm_gem_object_funcs rzg2l_du_gem_funcs = {
+ .free = drm_gem_dma_object_free,
+ .print_info = drm_gem_dma_object_print_info,
+ .get_sg_table = drm_gem_dma_object_get_sg_table,
+ .vmap = drm_gem_dma_object_vmap,
+ .mmap = drm_gem_dma_object_mmap,
+ .vm_ops = &drm_gem_dma_vm_ops,
+};
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt)
+{
+ struct drm_gem_dma_object *dma_obj;
+ struct drm_gem_object *gem_obj;
+ int ret;
+
+ /* Create a DMA GEM buffer. */
+ dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL);
+ if (!dma_obj)
+ return ERR_PTR(-ENOMEM);
+
+ gem_obj = &dma_obj->base;
+ gem_obj->funcs = &rzg2l_du_gem_funcs;
+
+ drm_gem_private_object_init(dev, gem_obj, attach->dmabuf->size);
+ dma_obj->map_noncoherent = false;
+
+ ret = drm_gem_create_mmap_offset(gem_obj);
+ if (ret) {
+ drm_gem_object_release(gem_obj);
+ kfree(dma_obj);
+ return ERR_PTR(ret);
+ }
+
+ dma_obj->dma_addr = 0;
+ dma_obj->sgt = sgt;
+
+ return gem_obj;
+}
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args)
+{
+ unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+ unsigned int align = 16 * args->bpp / 8;
+
+ args->pitch = roundup(min_pitch, align);
+
+ return drm_gem_dma_dumb_create_internal(file, dev, args);
+}
+
+static struct drm_framebuffer *
+rzg2l_du_fb_create(struct drm_device *dev, struct drm_file *file_priv,
+ const struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ const struct rzg2l_du_format_info *format;
+ unsigned int max_pitch;
+
+ format = rzg2l_du_format_info(mode_cmd->pixel_format);
+ if (!format) {
+ dev_dbg(dev->dev, "unsupported pixel format %p4cc\n",
+ &mode_cmd->pixel_format);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * On RZ/G2L the memory interface is handled by the VSP that limits the
+ * pitch to 65535 bytes.
+ */
+ max_pitch = 65535;
+ if (mode_cmd->pitches[0] > max_pitch) {
+ dev_dbg(dev->dev, "invalid pitch value %u\n",
+ mode_cmd->pitches[0]);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return drm_gem_fb_create(dev, file_priv, mode_cmd);
+}
+
+/* -----------------------------------------------------------------------------
+ * Atomic Check and Update
+ */
+
+static void rzg2l_du_atomic_commit_tail(struct drm_atomic_state *old_state)
+{
+ struct drm_device *dev = old_state->dev;
+
+ /* Apply the atomic update. */
+ drm_atomic_helper_commit_modeset_disables(dev, old_state);
+ drm_atomic_helper_commit_planes(dev, old_state,
+ DRM_PLANE_COMMIT_ACTIVE_ONLY);
+ drm_atomic_helper_commit_modeset_enables(dev, old_state);
+
+ drm_atomic_helper_commit_hw_done(old_state);
+ drm_atomic_helper_wait_for_flip_done(dev, old_state);
+
+ drm_atomic_helper_cleanup_planes(dev, old_state);
+}
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static const struct drm_mode_config_helper_funcs rzg2l_du_mode_config_helper = {
+ .atomic_commit_tail = rzg2l_du_atomic_commit_tail,
+};
+
+static const struct drm_mode_config_funcs rzg2l_du_mode_config_funcs = {
+ .fb_create = rzg2l_du_fb_create,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static int rzg2l_du_encoders_init_one(struct rzg2l_du_device *rcdu,
+ enum rzg2l_du_output output,
+ struct of_endpoint *ep)
+{
+ struct device_node *entity;
+ int ret;
+
+ /* Locate the connected entity and initialize the encoder. */
+ entity = of_graph_get_remote_port_parent(ep->local_node);
+ if (!entity) {
+ dev_dbg(rcdu->dev, "unconnected endpoint %pOF, skipping\n",
+ ep->local_node);
+ return -ENODEV;
+ }
+
+ if (!of_device_is_available(entity)) {
+ dev_dbg(rcdu->dev,
+ "connected entity %pOF is disabled, skipping\n",
+ entity);
+ of_node_put(entity);
+ return -ENODEV;
+ }
+
+ ret = rzg2l_du_encoder_init(rcdu, output, entity);
+ if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK)
+ dev_warn(rcdu->dev,
+ "failed to initialize encoder %pOF on output %s (%d), skipping\n",
+ entity, rzg2l_du_output_name(output), ret);
+
+ of_node_put(entity);
+
+ return ret;
+}
+
+static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu)
+{
+ struct device_node *np = rcdu->dev->of_node;
+ struct device_node *ep_node;
+ unsigned int num_encoders = 0;
+
+ /*
+ * Iterate over the endpoints and create one encoder for each output
+ * pipeline.
+ */
+ for_each_endpoint_of_node(np, ep_node) {
+ enum rzg2l_du_output output;
+ struct of_endpoint ep;
+ unsigned int i;
+ int ret;
+
+ ret = of_graph_parse_endpoint(ep_node, &ep);
+ if (ret < 0) {
+ of_node_put(ep_node);
+ return ret;
+ }
+
+ /* Find the output route corresponding to the port number. */
+ for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) {
+ if (rcdu->info->routes[i].port == ep.port) {
+ output = i;
+ break;
+ }
+ }
+
+ if (i == RZG2L_DU_OUTPUT_MAX) {
+ dev_warn(rcdu->dev,
+ "port %u references unexisting output, skipping\n",
+ ep.port);
+ continue;
+ }
+
+ /* Process the output pipeline. */
+ ret = rzg2l_du_encoders_init_one(rcdu, output, &ep);
+ if (ret < 0) {
+ if (ret == -EPROBE_DEFER) {
+ of_node_put(ep_node);
+ return ret;
+ }
+
+ continue;
+ }
+
+ num_encoders++;
+ }
+
+ return num_encoders;
+}
+
+static int rzg2l_du_vsps_init(struct rzg2l_du_device *rcdu)
+{
+ const struct device_node *np = rcdu->dev->of_node;
+ const char *vsps_prop_name = "renesas,vsps";
+ struct of_phandle_args args;
+ struct {
+ struct device_node *np;
+ unsigned int crtcs_mask;
+ } vsps[RZG2L_DU_MAX_VSPS] = { { NULL, }, };
+ unsigned int vsps_count = 0;
+ unsigned int cells;
+ unsigned int i;
+ int ret;
+
+ /*
+ * First parse the DT vsps property to populate the list of VSPs. Each
+ * entry contains a pointer to the VSP DT node and a bitmask of the
+ * connected DU CRTCs.
+ */
+ ret = of_property_count_u32_elems(np, vsps_prop_name);
+ if (ret < 0) {
+ /* Backward compatibility with old DTBs. */
+ vsps_prop_name = "vsps";
+ ret = of_property_count_u32_elems(np, vsps_prop_name);
+ }
+ cells = ret / rcdu->num_crtcs - 1;
+ if (cells > 1)
+ return -EINVAL;
+
+ for (i = 0; i < rcdu->num_crtcs; ++i) {
+ unsigned int j;
+
+ ret = of_parse_phandle_with_fixed_args(np, vsps_prop_name,
+ cells, i, &args);
+ if (ret < 0)
+ goto error;
+
+ /*
+ * Add the VSP to the list or update the corresponding existing
+ * entry if the VSP has already been added.
+ */
+ for (j = 0; j < vsps_count; ++j) {
+ if (vsps[j].np == args.np)
+ break;
+ }
+
+ if (j < vsps_count)
+ of_node_put(args.np);
+ else
+ vsps[vsps_count++].np = args.np;
+
+ vsps[j].crtcs_mask |= BIT(i);
+
+ /*
+ * Store the VSP pointer and pipe index in the CRTC. If the
+ * second cell of the 'renesas,vsps' specifier isn't present,
+ * default to 0 to remain compatible with older DT bindings.
+ */
+ rcdu->crtcs[i].vsp = &rcdu->vsps[j];
+ rcdu->crtcs[i].vsp_pipe = cells >= 1 ? args.args[0] : 0;
+ }
+
+ /*
+ * Then initialize all the VSPs from the node pointers and CRTCs bitmask
+ * computed previously.
+ */
+ for (i = 0; i < vsps_count; ++i) {
+ struct rzg2l_du_vsp *vsp = &rcdu->vsps[i];
+
+ vsp->index = i;
+ vsp->dev = rcdu;
+
+ ret = rzg2l_du_vsp_init(vsp, vsps[i].np, vsps[i].crtcs_mask);
+ if (ret < 0)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ for (i = 0; i < ARRAY_SIZE(vsps); ++i)
+ of_node_put(vsps[i].np);
+
+ return ret;
+}
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu)
+{
+ struct drm_device *dev = &rcdu->ddev;
+ struct drm_encoder *encoder;
+ unsigned int num_encoders;
+ int ret;
+
+ ret = drmm_mode_config_init(dev);
+ if (ret)
+ return ret;
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.normalize_zpos = true;
+ dev->mode_config.funcs = &rzg2l_du_mode_config_funcs;
+ dev->mode_config.helper_private = &rzg2l_du_mode_config_helper;
+
+ /*
+ * The RZ DU uses the VSP1 for memory access, and is limited
+ * to frame sizes of 1920x1080.
+ */
+ dev->mode_config.max_width = 1920;
+ dev->mode_config.max_height = 1080;
+
+ rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);
+
+ /*
+ * Initialize vertical blanking interrupts handling. Start with vblank
+ * disabled for all CRTCs.
+ */
+ ret = drm_vblank_init(dev, rcdu->num_crtcs);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize the compositors. */
+ ret = rzg2l_du_vsps_init(rcdu);
+ if (ret < 0)
+ return ret;
+
+ /* Create the CRTCs. */
+ ret = rzg2l_du_crtc_create(rcdu);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize the encoders. */
+ ret = rzg2l_du_encoders_init(rcdu);
+ if (ret < 0) {
+ dev_err_probe(rcdu->dev, ret, "failed to initialize encoders\n");
+ return ret;
+ }
+
+ if (ret == 0) {
+ dev_err(rcdu->dev, "error: no encoder could be initialized\n");
+ return -EINVAL;
+ }
+
+ num_encoders = ret;
+
+ /*
+ * Set the possible CRTCs and possible clones. There's always at least
+ * one way for all encoders to clone each other, set all bits in the
+ * possible clones field.
+ */
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder);
+ const struct rzg2l_du_output_routing *route =
+ &rcdu->info->routes[renc->output];
+
+ encoder->possible_crtcs = route->possible_outputs;
+ encoder->possible_clones = (1 << num_encoders) - 1;
+ }
+
+ drm_mode_config_reset(dev);
+
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit Mode Setting
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_kms.h
+ */
+
+#ifndef __RZG2L_DU_KMS_H__
+#define __RZG2L_DU_KMS_H__
+
+#include <linux/types.h>
+
+struct dma_buf_attachment;
+struct drm_file;
+struct drm_device;
+struct drm_gem_object;
+struct drm_mode_create_dumb;
+struct rzg2l_du_device;
+struct sg_table;
+
+struct rzg2l_du_format_info {
+ u32 fourcc;
+ u32 v4l2;
+ unsigned int bpp;
+ unsigned int planes;
+ unsigned int hsub;
+};
+
+const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc);
+
+int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu);
+
+int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev,
+ struct drm_mode_create_dumb *args);
+
+struct drm_gem_object *
+rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt);
+
+#endif /* __RZG2L_DU_KMS_H__ */
new file mode 100644
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.c
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_vblank.h>
+
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+
+#include <media/vsp1.h>
+
+#include "rzg2l_du_drv.h"
+#include "rzg2l_du_kms.h"
+#include "rzg2l_du_vsp.h"
+
+static void rzg2l_du_vsp_complete(void *private, unsigned int status, u32 crc)
+{
+ struct rzg2l_du_crtc *crtc = private;
+
+ if (crtc->vblank_enable)
+ drm_crtc_handle_vblank(&crtc->crtc);
+
+ if (status & VSP1_DU_STATUS_COMPLETE)
+ rzg2l_du_crtc_finish_page_flip(crtc);
+
+ drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc);
+}
+
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc)
+{
+ const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode;
+ struct vsp1_du_lif_config cfg = {
+ .width = mode->hdisplay,
+ .height = mode->vdisplay,
+ .interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE,
+ .callback = rzg2l_du_vsp_complete,
+ .callback_data = crtc,
+ };
+
+ vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc)
+{
+ vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL);
+}
+
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc)
+{
+ vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe);
+}
+
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc)
+{
+ struct vsp1_du_atomic_pipe_config cfg = { { 0, } };
+ struct rzg2l_du_crtc_state *state;
+
+ state = to_rzg2l_crtc_state(crtc->crtc.state);
+
+ vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg);
+}
+
+static const u32 rzg2l_du_vsp_formats[] = {
+ DRM_FORMAT_RGB332,
+ DRM_FORMAT_ARGB4444,
+ DRM_FORMAT_XRGB4444,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_BGR888,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_BGRA8888,
+ DRM_FORMAT_BGRX8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_NV21,
+ DRM_FORMAT_NV16,
+ DRM_FORMAT_NV61,
+ DRM_FORMAT_YUV420,
+ DRM_FORMAT_YVU420,
+ DRM_FORMAT_YUV422,
+ DRM_FORMAT_YVU422,
+ DRM_FORMAT_YUV444,
+ DRM_FORMAT_YVU444,
+};
+
+static void rzg2l_du_vsp_plane_setup(struct rzg2l_du_vsp_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *state =
+ to_rzg2l_vsp_plane_state(plane->plane.state);
+ struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(state->state.crtc);
+ struct drm_framebuffer *fb = plane->plane.state->fb;
+ const struct rzg2l_du_format_info *format;
+ struct vsp1_du_atomic_config cfg = {
+ .pixelformat = 0,
+ .pitch = fb->pitches[0],
+ .alpha = state->state.alpha >> 8,
+ .zpos = state->state.zpos,
+ };
+ u32 fourcc = state->format->fourcc;
+ unsigned int i;
+
+ cfg.src.left = state->state.src.x1 >> 16;
+ cfg.src.top = state->state.src.y1 >> 16;
+ cfg.src.width = drm_rect_width(&state->state.src) >> 16;
+ cfg.src.height = drm_rect_height(&state->state.src) >> 16;
+
+ cfg.dst.left = state->state.dst.x1;
+ cfg.dst.top = state->state.dst.y1;
+ cfg.dst.width = drm_rect_width(&state->state.dst);
+ cfg.dst.height = drm_rect_height(&state->state.dst);
+
+ for (i = 0; i < state->format->planes; ++i)
+ cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl)
+ + fb->offsets[i];
+
+ if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
+ switch (fourcc) {
+ case DRM_FORMAT_ARGB1555:
+ fourcc = DRM_FORMAT_XRGB1555;
+ break;
+
+ case DRM_FORMAT_ARGB4444:
+ fourcc = DRM_FORMAT_XRGB4444;
+ break;
+
+ case DRM_FORMAT_ARGB8888:
+ fourcc = DRM_FORMAT_XRGB8888;
+ break;
+ }
+ }
+
+ format = rzg2l_du_format_info(fourcc);
+ cfg.pixelformat = format->v4l2;
+
+ cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI;
+
+ vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe,
+ plane->index, &cfg);
+}
+
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ struct rzg2l_du_device *rcdu = vsp->dev;
+ unsigned int i, j;
+ int ret;
+
+ for (i = 0; i < fb->format->num_planes; ++i) {
+ struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
+ struct sg_table *sgt = &sg_tables[i];
+
+ if (gem->sgt) {
+ struct scatterlist *src;
+ struct scatterlist *dst;
+
+ /*
+ * If the GEM buffer has a scatter gather table, it has
+ * been imported from a dma-buf and has no physical
+ * address as it might not be physically contiguous.
+ * Copy the original scatter gather table to map it to
+ * the VSP.
+ */
+ ret = sg_alloc_table(sgt, gem->sgt->orig_nents,
+ GFP_KERNEL);
+ if (ret)
+ goto fail;
+
+ src = gem->sgt->sgl;
+ dst = sgt->sgl;
+ for (j = 0; j < gem->sgt->orig_nents; ++j) {
+ sg_set_page(dst, sg_page(src), src->length,
+ src->offset);
+ src = sg_next(src);
+ dst = sg_next(dst);
+ }
+ } else {
+ ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr,
+ gem->dma_addr, gem->base.size);
+ if (ret)
+ goto fail;
+ }
+
+ ret = vsp1_du_map_sg(vsp->vsp, sgt);
+ if (ret) {
+ sg_free_table(sgt);
+ goto fail;
+ }
+ }
+
+ return 0;
+
+fail:
+ while (i--) {
+ struct sg_table *sgt = &sg_tables[i];
+
+ vsp1_du_unmap_sg(vsp->vsp, sgt);
+ sg_free_table(sgt);
+ }
+
+ return ret;
+}
+
+static int rzg2l_du_vsp_plane_prepare_fb(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+ struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+ int ret;
+
+ /*
+ * There's no need to prepare (and unprepare) the framebuffer when the
+ * plane is not visible, as it will not be displayed.
+ */
+ if (!state->visible)
+ return 0;
+
+ ret = rzg2l_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables);
+ if (ret < 0)
+ return ret;
+
+ return drm_gem_plane_helper_prepare_fb(plane, state);
+}
+
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ unsigned int i;
+
+ for (i = 0; i < fb->format->num_planes; ++i) {
+ struct sg_table *sgt = &sg_tables[i];
+
+ vsp1_du_unmap_sg(vsp->vsp, sgt);
+ sg_free_table(sgt);
+ }
+}
+
+static void rzg2l_du_vsp_plane_cleanup_fb(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state);
+ struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp;
+
+ if (!state->visible)
+ return;
+
+ rzg2l_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables);
+}
+
+static int __rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ const struct rzg2l_du_format_info **format)
+{
+ struct drm_crtc_state *crtc_state;
+ int ret;
+
+ if (!state->crtc) {
+ /*
+ * The visible field is not reset by the DRM core but only
+ * updated by drm_atomic_helper_check_plane_state, set it
+ * manually.
+ */
+ state->visible = false;
+ *format = NULL;
+ return 0;
+ }
+
+ crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ ret = drm_atomic_helper_check_plane_state(state, crtc_state,
+ DRM_PLANE_NO_SCALING,
+ DRM_PLANE_NO_SCALING,
+ true, true);
+ if (ret < 0)
+ return ret;
+
+ if (!state->visible) {
+ *format = NULL;
+ return 0;
+ }
+
+ *format = rzg2l_du_format_info(state->fb->format->format);
+
+ return 0;
+}
+
+static int rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane,
+ struct drm_atomic_state *state)
+{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+ plane);
+ struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(new_plane_state);
+
+ return __rzg2l_du_vsp_plane_atomic_check(plane, new_plane_state, &rstate->format);
+}
+
+static void rzg2l_du_vsp_plane_atomic_update(struct drm_plane *plane,
+ struct drm_atomic_state *state)
+{
+ struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
+ struct rzg2l_du_vsp_plane *rplane = to_rzg2l_vsp_plane(plane);
+ struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(old_state->crtc);
+
+ if (new_state->visible)
+ rzg2l_du_vsp_plane_setup(rplane);
+ else if (old_state->crtc)
+ vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe,
+ rplane->index, NULL);
+}
+
+static const struct drm_plane_helper_funcs rzg2l_du_vsp_plane_helper_funcs = {
+ .prepare_fb = rzg2l_du_vsp_plane_prepare_fb,
+ .cleanup_fb = rzg2l_du_vsp_plane_cleanup_fb,
+ .atomic_check = rzg2l_du_vsp_plane_atomic_check,
+ .atomic_update = rzg2l_du_vsp_plane_atomic_update,
+};
+
+static struct drm_plane_state *
+rzg2l_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *copy;
+
+ if (WARN_ON(!plane->state))
+ return NULL;
+
+ copy = kzalloc(sizeof(*copy), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_plane_duplicate_state(plane, ©->state);
+
+ return ©->state;
+}
+
+static void rzg2l_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ __drm_atomic_helper_plane_destroy_state(state);
+ kfree(to_rzg2l_vsp_plane_state(state));
+}
+
+static void rzg2l_du_vsp_plane_reset(struct drm_plane *plane)
+{
+ struct rzg2l_du_vsp_plane_state *state;
+
+ if (plane->state) {
+ rzg2l_du_vsp_plane_atomic_destroy_state(plane, plane->state);
+ plane->state = NULL;
+ }
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ __drm_atomic_helper_plane_reset(plane, &state->state);
+}
+
+static const struct drm_plane_funcs rzg2l_du_vsp_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .reset = rzg2l_du_vsp_plane_reset,
+ .destroy = drm_plane_cleanup,
+ .atomic_duplicate_state = rzg2l_du_vsp_plane_atomic_duplicate_state,
+ .atomic_destroy_state = rzg2l_du_vsp_plane_atomic_destroy_state,
+};
+
+static void rzg2l_du_vsp_cleanup(struct drm_device *dev, void *res)
+{
+ struct rzg2l_du_vsp *vsp = res;
+ unsigned int i;
+
+ for (i = 0; i < vsp->num_planes; ++i) {
+ struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+ drm_plane_cleanup(&plane->plane);
+ }
+
+ kfree(vsp->planes);
+
+ put_device(vsp->vsp);
+}
+
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs)
+{
+ struct rzg2l_du_device *rcdu = vsp->dev;
+ struct platform_device *pdev;
+ unsigned int num_crtcs = hweight32(crtcs);
+ unsigned int num_planes = 2;
+ unsigned int i;
+ int ret;
+
+ /* Find the VSP device and initialize it. */
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return -ENXIO;
+
+ vsp->vsp = &pdev->dev;
+
+ ret = drmm_add_action_or_reset(&rcdu->ddev, rzg2l_du_vsp_cleanup, vsp);
+ if (ret < 0)
+ return ret;
+
+ ret = vsp1_du_init(vsp->vsp);
+ if (ret < 0)
+ return ret;
+
+ vsp->planes = kcalloc(num_planes, sizeof(*vsp->planes), GFP_KERNEL);
+ if (!vsp->planes)
+ return -ENOMEM;
+
+ for (i = 0; i < num_planes; ++i) {
+ enum drm_plane_type type = i < num_crtcs
+ ? DRM_PLANE_TYPE_PRIMARY
+ : DRM_PLANE_TYPE_OVERLAY;
+ struct rzg2l_du_vsp_plane *plane = &vsp->planes[i];
+
+ plane->vsp = vsp;
+ plane->index = i;
+ ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane,
+ crtcs, &rzg2l_du_vsp_plane_funcs,
+ rzg2l_du_vsp_formats,
+ ARRAY_SIZE(rzg2l_du_vsp_formats),
+ NULL, type, NULL);
+ if (ret < 0)
+ return ret;
+
+ drm_plane_helper_add(&plane->plane,
+ &rzg2l_du_vsp_plane_helper_funcs);
+
+ drm_plane_create_alpha_property(&plane->plane);
+ drm_plane_create_zpos_property(&plane->plane, i, 0,
+ num_planes - 1);
+
+ drm_plane_create_blend_mode_property(&plane->plane,
+ BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+ BIT(DRM_MODE_BLEND_PREMULTI) |
+ BIT(DRM_MODE_BLEND_COVERAGE));
+
+ vsp->num_planes++;
+ }
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * RZ/G2L Display Unit VSP-Based Compositor
+ *
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ *
+ * Based on rcar_du_vsp.h
+ */
+
+#ifndef __RZG2L_DU_VSP_H__
+#define __RZG2L_DU_VSP_H__
+
+#include <drm/drm_plane.h>
+#include <linux/container_of.h>
+#include <linux/scatterlist.h>
+
+struct device;
+struct drm_framebuffer;
+struct rzg2l_du_device;
+struct rzg2l_du_format_info;
+struct rzg2l_du_vsp;
+
+struct rzg2l_du_vsp_plane {
+ struct drm_plane plane;
+ struct rzg2l_du_vsp *vsp;
+ unsigned int index;
+};
+
+struct rzg2l_du_vsp {
+ unsigned int index;
+ struct device *vsp;
+ struct rzg2l_du_device *dev;
+ struct rzg2l_du_vsp_plane *planes;
+ unsigned int num_planes;
+};
+
+static inline struct rzg2l_du_vsp_plane *to_rzg2l_vsp_plane(struct drm_plane *p)
+{
+ return container_of(p, struct rzg2l_du_vsp_plane, plane);
+}
+
+/**
+ * struct rzg2l_du_vsp_plane_state - Driver-specific plane state
+ * @state: base DRM plane state
+ * @format: information about the pixel format used by the plane
+ * @sg_tables: scatter-gather tables for the frame buffer memory
+ */
+struct rzg2l_du_vsp_plane_state {
+ struct drm_plane_state state;
+
+ const struct rzg2l_du_format_info *format;
+ struct sg_table sg_tables[3];
+};
+
+static inline struct rzg2l_du_vsp_plane_state *
+to_rzg2l_vsp_plane_state(struct drm_plane_state *state)
+{
+ return container_of(state, struct rzg2l_du_vsp_plane_state, state);
+}
+
+#ifdef CONFIG_DRM_RCAR_VSP
+int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs);
+void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc);
+void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc);
+int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3]);
+void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3]);
+#else
+static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
+ unsigned int crtcs)
+{
+ return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) { };
+static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { };
+static inline int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp,
+ struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+ return -ENXIO;
+}
+
+static inline void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp,
+ struct drm_framebuffer *fb,
+ struct sg_table sg_tables[3])
+{
+}
+#endif
+
+#endif /* __RZG2L_DU_VSP_H__ */
The LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). It has DPI/DSI interfaces and supports a maximum resolution of 1080p along with 2 RPFs to support the blending of two picture layers and raster operations (ROPs). The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L alike SoCs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> --- Ref: https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@OS0PR01MB5922.jpnprd01.prod.outlook.com/#t v10->v11: * Replaced CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1 for building rzg2l_du_vsp driver. * Dropped "rzg2l_du_regs.h" instead the relevant definitions defined in .c file. * Dropped setting ditr5 based on latest HW manual 1.3.0/1.4.0 * Updated the comment for auto clear. * Replaced writel()->rzg2l_du_write() in rzg2l_du_start_stop(). * Dropped CRC related functions as it does not have DISCOM. * Replaced the variable possible_crtcs->possible_outputs in struct rzg2l_du_output_routing. * Updated DMA_BIT_MASK from 40->32. * Dropped unneeded struct drm_bridge from rzg2l_du_drv.h. * Dropped colour keying support as it doesn't have planes. * Added only RGB formats in rzg2l_du_format_infos. * Dropped chroma planes from rzg2l_du_fb_create(). * Updated the comment for max_pitch in rzg2l_du_fb_create(). * Dropped possible_crtcs check in rzg2l_du_encoders_init(). * Dropped additional empty line from struct rzg2l_du_device. v9->v10: * Dropped ARM64 dependency from Kconfig. * Sorted the configs alphabetically in Kconfig. * Dropped DRM_RCAR_VSP config option and make DRM_RZG2L_DU depend on VIDEO_RENESAS_VSP1. * On rzg2l_du_crtc_set_display_timing() replaced the setting of parent clk rate with dclk rate. * Added rzg2l_du_write() wrapper function. * Updated the comment atomic_begin->atomic_flush. * Dropped .atomic_check and .atomic_begin callback * Renamed __rzg2l_du_crtc_plane_atomic_check->__rzg2l_du_vsp_plane_atomic _check and moved it to rzg2l_du_vsp.c * Added struct clk in rzg2l_du_crtc.h * Dropped the variables mmio_offset,index,vblank_lock,vblank_wait, vblank_count from struct rzg2l_du_crtc. * Replaced the macro to_rzg2l_crtc with static inline functions. * Dropped the unneeded header files clk.h, io.h, mm.h, pm.h, slab.h, wait.h and drm_managed.h from rzg2l_du_drv.c. * Replaced DRM_INFO->drm_info * Dropped the callbacks prime_handle_to_fd, prime_fd_to_handle and gem_prime_mmap. * Replaced the callback remove->remove_new. * Dropped header file wait.h and added forward declarations struct clk and rzg2l_du_device from rzg2l_du_drv.h. * Dropped the dsi and dpad0_source variables from struct rzg2l_du_device. * Replaced the macro to_rzg2l_encoder with static inline functions. * Dropped header files dma-buf.h and wait.h from rzg2l_du_kms.c. * Dropped struct sg_table and added the scatterlist.h header file in rzg2l_du_vsp.h * Added container_of.h header file, forward declarations struct device and struct rzg2l_du_device in rzg2l_du_vsp.h. v8->v9: * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as suggested by Philipp Zabel. v7->v8: * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder. * Updated KConfig and Makefile. v6->v7: * Split DU lib and RZ/G2L du driver as separate patch series as DU support added to more platforms based on RZ/G2L alike SoCs. * Rebased to latest drm-tip. * Added patch #2 for binding support for RZ/V2L DU * Added patch #4 for driver support for RZ/V2L DU * Added patch #5 for SoC DTSI support for RZ/G2L DU * Added patch #6 for SoC DTSI support for RZ/V2L DU * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs. * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC. --- drivers/gpu/drm/renesas/Kconfig | 1 + drivers/gpu/drm/renesas/Makefile | 1 + drivers/gpu/drm/renesas/rz-du/Kconfig | 12 + drivers/gpu/drm/renesas/rz-du/Makefile | 8 + drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 438 ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 89 ++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 176 +++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 78 +++ .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 72 +++ .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 32 ++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 441 ++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 ++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 469 ++++++++++++++++++ drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 97 ++++ 14 files changed, 1957 insertions(+) create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h