new file mode 100644
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,ptn36502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN36502 Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver
+
+maintainers:
+ - Luca Weiss <luca.weiss@fairphone.com>
+
+properties:
+ compatible:
+ enum:
+ - nxp,ptn36502
+
+ reg:
+ maxItems: 1
+
+ vdd18-supply:
+ description: Power supply for VDD18 pin
+
+ retimer-switch:
+ description: Flag the port as possible handle of SuperSpeed signals retiming
+ type: boolean
+
+ orientation-switch:
+ description: Flag the port as possible handler of orientation switching
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Super Speed (SS) Output endpoint to the Type-C connector
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+ handling altmode muxing and orientation switching.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ typec-mux@1a {
+ compatible = "nxp,ptn36502";
+ reg = <0x1a>;
+
+ vdd18-supply = <&usb_redrive_1v8>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ phy_con_ss: endpoint {
+ remote-endpoint = <&usb_phy_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&typec_dp_aux>;
+ };
+ };
+ };
+ };
+ };
+...
Document bindings for this Type-C USB 3.1 Gen 1 and DisplayPort v1.2 combo redriver. The PTN36502 can also run in GPIO mode where it is configured differently, without any I2C connection, but this is not supported yet. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- .../devicetree/bindings/usb/nxp,ptn36502.yaml | 94 ++++++++++++++++++++++ 1 file changed, 94 insertions(+)