| Message ID | 20231016-marvell-88e6152-wan-led-v3-3-38cd449dfb15@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Create a binding for the Marvell MV88E6xxx DSA switches | expand |
On Mon, Oct 16, 2023 at 11:12:56AM +0200, Linus Walleij wrote: > When adding a proper schema for the Marvell mx88e6xxx switch, > the scripts start complaining about this embedded example: > > dtschema/dtc warnings/errors: > net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > > Fix this up by extending the example. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml > index 3a3325168048..ee677cf7df4e 100644 > --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml > +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml > @@ -56,6 +56,12 @@ examples: > > ports { > /* Port definitions */ > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + }; Could you just skip defining any port, and just leave the /* Port definitions */ comment at the end (after the newly added #address-cells and #size-cells)? This example is more about the USB adapter, not about the switch. > }; > > mdio { > > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 3a3325168048..ee677cf7df4e 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -56,6 +56,12 @@ examples: ports { /* Port definitions */ + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; }; mdio {
When adding a proper schema for the Marvell mx88e6xxx switch, the scripts start complaining about this embedded example: dtschema/dtc warnings/errors: net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# Fix this up by extending the example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 6 ++++++ 1 file changed, 6 insertions(+)