| Message ID | 20231016183925.2384704-2-nsg@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | s390x: CPU Topology | expand |
Nina Schoetterl-Glausch <nsg@linux.ibm.com> writes: > Clarify roles of different architectures. > Also change things a bit in anticipation of additional members being > added. > > Suggested-by: Markus Armbruster <armbru@redhat.com> > Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> > --- > qapi/machine.json | 58 +++++++++++++++++++++++++++++++---------------- > 1 file changed, 38 insertions(+), 20 deletions(-) > > diff --git a/qapi/machine.json b/qapi/machine.json > index a08b6576ca..058e884fd2 100644 > --- a/qapi/machine.json > +++ b/qapi/machine.json > @@ -71,8 +71,8 @@ > # > # @thread-id: ID of the underlying host thread > # > -# @props: properties describing to which node/socket/core/thread > -# virtual CPU belongs to, provided if supported by board > +# @props: properties of type CpuInstanceProperties associated with a > +# virtual CPU, e.g. the socket id This comes out like "props": "CpuInstanceProperties" (optional) properties of type CpuInstanceProperties associated with a virtual CPU, e.g. the socket id in generated documentation. Scratch "of type CpuInstanceProperties, please. > # > # @target: the QEMU system emulation target, which determines which > # additional fields will be listed (since 3.0) > @@ -899,28 +899,34 @@ > # should be passed by management with device_add command when a CPU is > # being hotplugged. > # > +# Which members are optional and which mandatory depends on the > +# architecture and board. > +# > +# The ids other than the node-id specify the position of the CPU > +# within the CPU topology as defined by @SMPConfiguration. Actually by machine property "smp", which is of type SMPConfiguration. Not obvious for the reader. Suggest "as defined by machine property "smp". > +# > # @node-id: NUMA node ID the CPU belongs to > # > -# @socket-id: socket number within node/board the CPU belongs to > +# @socket-id: socket number within CPU topology the CPU belongs to > # > -# @die-id: die number within socket the CPU belongs to (since 4.1) > +# @die-id: die number within the parent container the CPU belongs to > +# (since 4.1) > # > -# @cluster-id: cluster number within die the CPU belongs to (since > -# 7.1) > +# @cluster-id: cluster number within the parent container the CPU > +# belongs to (since 7.1) > # > -# @core-id: core number within cluster the CPU belongs to > +# @core-id: core number within the parent container the CPU > +# belongs to > # > -# @thread-id: thread number within core the CPU belongs to > +# @thread-id: thread number within the core the CPU belongs to > # > -# Note: currently there are 6 properties that could be present but > -# management should be prepared to pass through other properties > -# with device_add command to allow for future interface extension. > -# This also requires the filed names to be kept in sync with the > -# properties passed to -device/device_add. > +# Note: management should be prepared to pass through additional > +# properties with device_add. > # > # Since: 2.7 > ## > { 'struct': 'CpuInstanceProperties', > + # Keep these in sync with the properties device_add accepts > 'data': { '*node-id': 'int', > '*socket-id': 'int', > '*die-id': 'int', > @@ -1478,21 +1484,33 @@ > # Schema for CPU topology configuration. A missing value lets QEMU > # figure out a suitable value based on the ones that are provided. > # > +# The members other than @cpus and @maxcpus define topology > +# containers. "define a topology of containers"? "define a hierarchy of containers"? > +# > +# The ordering from highest/coarsest to lowest/finest is: > +# @sockets, @dies, @clusters, @cores, @threads. > +# > +# Different architectures support different subsets of topology > +# containers. > +# > +# For examples, s390x does not have clusters and dies, the socket "For example," ", and the socket is" > +# is the parent container of cores. > +# > # @cpus: number of virtual CPUs in the virtual machine > # > +# @maxcpus: maximum number of hotpluggable virtual CPUs in the virtual > +# machine > +# > # @sockets: number of sockets in the CPU topology > # > -# @dies: number of dies per socket in the CPU topology > +# @dies: number of dies per parent container > # > -# @clusters: number of clusters per die in the CPU topology (since > +# @clusters: number of clusters per parent container (since > # 7.0) This now fits in the previous line: # @clusters: number of clusters per parent container (since 7.0) > # > -# @cores: number of cores per cluster in the CPU topology > +# @cores: number of cores per parent container > # > -# @threads: number of threads per core in the CPU topology > -# > -# @maxcpus: maximum number of hotpluggable virtual CPUs in the virtual > -# machine > +# @threads: number of threads per core Much clearer than before. > # > # Since: 6.1 > ## Address my nitpicks one way or the other, and you may add Acked-by: Markus Armbruster <armbru@redhat.com>
On 17/10/2023 11.40, Markus Armbruster wrote: > Nina Schoetterl-Glausch <nsg@linux.ibm.com> writes: > >> Clarify roles of different architectures. >> Also change things a bit in anticipation of additional members being >> added. >> >> Suggested-by: Markus Armbruster <armbru@redhat.com> >> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> >> --- >> qapi/machine.json | 58 +++++++++++++++++++++++++++++++---------------- >> 1 file changed, 38 insertions(+), 20 deletions(-) ... > > Address my nitpicks one way or the other, and you may add > Acked-by: Markus Armbruster <armbru@redhat.com> > Thanks Markus! Nina, if you agree, I can fix the nitpicks while picking the patches up, so you don't have to respin again? Thomas
On Tue, 2023-10-17 at 13:10 +0200, Thomas Huth wrote: > On 17/10/2023 11.40, Markus Armbruster wrote: > > Nina Schoetterl-Glausch <nsg@linux.ibm.com> writes: > > > > > Clarify roles of different architectures. > > > Also change things a bit in anticipation of additional members being > > > added. > > > > > > Suggested-by: Markus Armbruster <armbru@redhat.com> > > > Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> > > > --- > > > qapi/machine.json | 58 +++++++++++++++++++++++++++++++---------------- > > > 1 file changed, 38 insertions(+), 20 deletions(-) > ... > > > > Address my nitpicks one way or the other, and you may add > > Acked-by: Markus Armbruster <armbru@redhat.com> > > > > Thanks Markus! > > Nina, if you agree, I can fix the nitpicks while picking the patches up, so > you don't have to respin again? Thanks for going ahead with it! I was out sick the last couple of days. > > Thomas >
diff --git a/qapi/machine.json b/qapi/machine.json index a08b6576ca..058e884fd2 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -71,8 +71,8 @@ # # @thread-id: ID of the underlying host thread # -# @props: properties describing to which node/socket/core/thread -# virtual CPU belongs to, provided if supported by board +# @props: properties of type CpuInstanceProperties associated with a +# virtual CPU, e.g. the socket id # # @target: the QEMU system emulation target, which determines which # additional fields will be listed (since 3.0) @@ -899,28 +899,34 @@ # should be passed by management with device_add command when a CPU is # being hotplugged. # +# Which members are optional and which mandatory depends on the +# architecture and board. +# +# The ids other than the node-id specify the position of the CPU +# within the CPU topology as defined by @SMPConfiguration. +# # @node-id: NUMA node ID the CPU belongs to # -# @socket-id: socket number within node/board the CPU belongs to +# @socket-id: socket number within CPU topology the CPU belongs to # -# @die-id: die number within socket the CPU belongs to (since 4.1) +# @die-id: die number within the parent container the CPU belongs to +# (since 4.1) # -# @cluster-id: cluster number within die the CPU belongs to (since -# 7.1) +# @cluster-id: cluster number within the parent container the CPU +# belongs to (since 7.1) # -# @core-id: core number within cluster the CPU belongs to +# @core-id: core number within the parent container the CPU +# belongs to # -# @thread-id: thread number within core the CPU belongs to +# @thread-id: thread number within the core the CPU belongs to # -# Note: currently there are 6 properties that could be present but -# management should be prepared to pass through other properties -# with device_add command to allow for future interface extension. -# This also requires the filed names to be kept in sync with the -# properties passed to -device/device_add. +# Note: management should be prepared to pass through additional +# properties with device_add. # # Since: 2.7 ## { 'struct': 'CpuInstanceProperties', + # Keep these in sync with the properties device_add accepts 'data': { '*node-id': 'int', '*socket-id': 'int', '*die-id': 'int', @@ -1478,21 +1484,33 @@ # Schema for CPU topology configuration. A missing value lets QEMU # figure out a suitable value based on the ones that are provided. # +# The members other than @cpus and @maxcpus define topology +# containers. +# +# The ordering from highest/coarsest to lowest/finest is: +# @sockets, @dies, @clusters, @cores, @threads. +# +# Different architectures support different subsets of topology +# containers. +# +# For examples, s390x does not have clusters and dies, the socket +# is the parent container of cores. +# # @cpus: number of virtual CPUs in the virtual machine # +# @maxcpus: maximum number of hotpluggable virtual CPUs in the virtual +# machine +# # @sockets: number of sockets in the CPU topology # -# @dies: number of dies per socket in the CPU topology +# @dies: number of dies per parent container # -# @clusters: number of clusters per die in the CPU topology (since +# @clusters: number of clusters per parent container (since # 7.0) # -# @cores: number of cores per cluster in the CPU topology +# @cores: number of cores per parent container # -# @threads: number of threads per core in the CPU topology -# -# @maxcpus: maximum number of hotpluggable virtual CPUs in the virtual -# machine +# @threads: number of threads per core # # Since: 6.1 ##
Clarify roles of different architectures. Also change things a bit in anticipation of additional members being added. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> --- qapi/machine.json | 58 +++++++++++++++++++++++++++++++---------------- 1 file changed, 38 insertions(+), 20 deletions(-)