| Message ID | 20231006125929.48591-6-lpieralisi@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/5] dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property | expand |
On Fri, Oct 06, 2023 at 02:59:29PM +0200, Lorenzo Pieralisi wrote: > The GIC architecture specification defines a set of registers > for redistributors and ITSes that control the sharebility and > cacheability attributes of redistributors/ITSes initiator ports > on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, > GITS_BASER<n>). > > Architecturally the GIC provides a means to drive shareability > and cacheability attributes signals and related IWB/OWB/ISH barriers > but it is not mandatory for designs to wire up the corresponding > interconnect signals that control the cacheability/shareability > of transactions. > > Redistributors and ITSes interconnect ports can be connected to > non-coherent interconnects that are not able to manage the > shareability/cacheability attributes; this implicitly makes > the redistributors and ITSes non-coherent observers. > > So far, the GIC driver on probe executes a write to "probe" for > the redistributors and ITSes registers shareability bitfields > by writing a value (ie InnerShareable - the shareability domain the > CPUs are in) and check it back to detect whether the value sticks or > not; this hinges on a GIC programming model behaviour that predates the > current specifications, that just define shareability bits as writeable > but do not guarantee that writing certain shareability values > enable the expected behaviour for the redistributors/ITSes > memory interconnect ports. > > To enable non-coherent GIC designs on ACPI based systems, parse the MADT > GICC/GICR/ITS subtables non-coherent flags to determine whether the > respective components are non-coherent observers and force the shareability > attributes to be programmed into the redistributors and ITSes registers. > > An ACPI global function (acpi_get_madt_revision()) is added to retrieve > the MADT revision, in that it is essential to check the MADT revision > before checking for flags that were added with MADT revision 7 so that > if the kernel is booted with ACPI tables (MADT rev < 7) it skips parsing > the newly added flags (that should be zeroed reserved values for MADT > versions < 7 but they could turn out to be buggy and should be ignored). > > Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > Cc: Robin Murphy <robin.murphy@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > Cc: Marc Zyngier <maz@kernel.org> > --- > drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ > drivers/irqchip/irq-gic-common.h | 8 ++++++++ > drivers/irqchip/irq-gic-v3-its.c | 4 ++++ > drivers/irqchip/irq-gic-v3.c | 9 +++++++++ > include/linux/acpi.h | 3 +++ > 5 files changed, 45 insertions(+) Hi Marc, just a quick note to ask if, from an ACPI binding POW this patch and related approach make sense to you. If so, we can start the process to get the ACPI changes drafted in: https://bugzilla.tianocore.org/show_bug.cgi?id=4557 and deployed in this patch into the ACPI specs, I can log an "ACK" in the tianocoreBZ entry above (we will be able to rework the code as much as we want, this is just for the bindings). Thanks, Lorenzo > > diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c > index 7dd6dbaa98c3..d3c7c6b0bb23 100644 > --- a/drivers/acpi/processor_core.c > +++ b/drivers/acpi/processor_core.c > @@ -215,6 +215,27 @@ phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id) > return rv; > } > > +u8 __init acpi_get_madt_revision(void) > +{ > + static u8 madt_revision __initdata; > + static bool madt_read __initdata; > + struct acpi_table_header *madt = NULL; > + > + if (!madt_read) { > + madt_read = true; > + > + acpi_get_table(ACPI_SIG_MADT, 0, &madt); > + if (!madt) > + return madt_revision; > + > + madt_revision = madt->revision; > + > + acpi_put_table(madt); > + } > + > + return madt_revision; > +} > + > static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) > { > struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; > diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h > index f407cce9ecaa..8dffee95f7e8 100644 > --- a/drivers/irqchip/irq-gic-common.h > +++ b/drivers/irqchip/irq-gic-common.h > @@ -6,6 +6,7 @@ > #ifndef _IRQ_GIC_COMMON_H > #define _IRQ_GIC_COMMON_H > > +#include <linux/acpi.h> > #include <linux/of.h> > #include <linux/irqdomain.h> > #include <linux/irqchip/arm-gic-common.h> > @@ -29,6 +30,13 @@ void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks, > void gic_enable_of_quirks(const struct device_node *np, > const struct gic_quirk *quirks, void *data); > > +#ifdef CONFIG_ACPI > +static inline bool gic_acpi_non_coherent_flag(u32 flags, u32 mask) > +{ > + return (acpi_get_madt_revision() >= 7) && (flags & mask); > +} > +#endif > + > #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0) > #define RDIST_FLAGS_RD_TABLES_PREALLOCATED (1 << 1) > #define RDIST_FLAGS_FORCE_NON_SHAREABLE (1 << 2) > diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c > index 75a2dd550625..72ae9422a26f 100644 > --- a/drivers/irqchip/irq-gic-v3-its.c > +++ b/drivers/irqchip/irq-gic-v3-its.c > @@ -5574,6 +5574,10 @@ static int __init gic_acpi_parse_madt_its(union acpi_subtable_headers *header, > goto node_err; > } > > + if (gic_acpi_non_coherent_flag(its_entry->flags, > + ACPI_MADT_ITS_NON_COHERENT)) > + its->flags |= ITS_FLAGS_FORCE_NON_SHAREABLE; > + > err = its_probe_one(its); > if (!err) > return 0; > diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c > index f59ac9586b7b..720d76790ada 100644 > --- a/drivers/irqchip/irq-gic-v3.c > +++ b/drivers/irqchip/irq-gic-v3.c > @@ -2364,6 +2364,11 @@ gic_acpi_parse_madt_redist(union acpi_subtable_headers *header, > pr_err("Couldn't map GICR region @%llx\n", redist->base_address); > return -ENOMEM; > } > + > + if (gic_acpi_non_coherent_flag(redist->flags, > + ACPI_MADT_GICR_NON_COHERENT)) > + gic_data.rdists.flags |= RDIST_FLAGS_FORCE_NON_SHAREABLE; > + > gic_request_region(redist->base_address, redist->length, "GICR"); > > gic_acpi_register_redist(redist->base_address, redist_base); > @@ -2389,6 +2394,10 @@ gic_acpi_parse_madt_gicc(union acpi_subtable_headers *header, > return -ENOMEM; > gic_request_region(gicc->gicr_base_address, size, "GICR"); > > + if (gic_acpi_non_coherent_flag(gicc->flags, > + ACPI_MADT_GICC_NON_COHERENT)) > + gic_data.rdists.flags |= RDIST_FLAGS_FORCE_NON_SHAREABLE; > + > gic_acpi_register_redist(gicc->gicr_base_address, redist_base); > return 0; > } > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index a73246c3c35e..56e4e5f39a62 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -298,6 +298,9 @@ static inline bool invalid_phys_cpuid(phys_cpuid_t phys_id) > return phys_id == PHYS_CPUID_INVALID; > } > > + > +u8 __init acpi_get_madt_revision(void); > + > /* Validate the processor object's proc_id */ > bool acpi_duplicate_processor_id(int proc_id); > /* Processor _CTS control */ > -- > 2.34.1 >
On Tue, 17 Oct 2023 15:19:46 +0100, Lorenzo Pieralisi <lpieralisi@kernel.org> wrote: > > On Fri, Oct 06, 2023 at 02:59:29PM +0200, Lorenzo Pieralisi wrote: > > The GIC architecture specification defines a set of registers > > for redistributors and ITSes that control the sharebility and > > cacheability attributes of redistributors/ITSes initiator ports > > on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, > > GITS_BASER<n>). > > > > Architecturally the GIC provides a means to drive shareability > > and cacheability attributes signals and related IWB/OWB/ISH barriers > > but it is not mandatory for designs to wire up the corresponding > > interconnect signals that control the cacheability/shareability > > of transactions. > > > > Redistributors and ITSes interconnect ports can be connected to > > non-coherent interconnects that are not able to manage the > > shareability/cacheability attributes; this implicitly makes > > the redistributors and ITSes non-coherent observers. > > > > So far, the GIC driver on probe executes a write to "probe" for > > the redistributors and ITSes registers shareability bitfields > > by writing a value (ie InnerShareable - the shareability domain the > > CPUs are in) and check it back to detect whether the value sticks or > > not; this hinges on a GIC programming model behaviour that predates the > > current specifications, that just define shareability bits as writeable > > but do not guarantee that writing certain shareability values > > enable the expected behaviour for the redistributors/ITSes > > memory interconnect ports. > > > > To enable non-coherent GIC designs on ACPI based systems, parse the MADT > > GICC/GICR/ITS subtables non-coherent flags to determine whether the > > respective components are non-coherent observers and force the shareability > > attributes to be programmed into the redistributors and ITSes registers. > > > > An ACPI global function (acpi_get_madt_revision()) is added to retrieve > > the MADT revision, in that it is essential to check the MADT revision > > before checking for flags that were added with MADT revision 7 so that > > if the kernel is booted with ACPI tables (MADT rev < 7) it skips parsing > > the newly added flags (that should be zeroed reserved values for MADT > > versions < 7 but they could turn out to be buggy and should be ignored). > > > > Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > > Cc: Robin Murphy <robin.murphy@arm.com> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > > Cc: Marc Zyngier <maz@kernel.org> > > --- > > drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ > > drivers/irqchip/irq-gic-common.h | 8 ++++++++ > > drivers/irqchip/irq-gic-v3-its.c | 4 ++++ > > drivers/irqchip/irq-gic-v3.c | 9 +++++++++ > > include/linux/acpi.h | 3 +++ > > 5 files changed, 45 insertions(+) > > Hi Marc, > > just a quick note to ask if, from an ACPI binding POW I guess you mean POV. POW has an entirely different meaning... :-/ > this patch and related approach make sense to you. > > If so, we can start the process to get the ACPI changes drafted > in: > > https://bugzilla.tianocore.org/show_bug.cgi?id=4557 > > and deployed in this patch into the ACPI specs, I can log > an "ACK" in the tianocoreBZ entry above (we will be able to > rework the code as much as we want, this is just for the > bindings). I'm OK with the overall shape of it. However, I wonder what the rationale is for spreading the redistributor property all over the map (in both GICC and GICR structures), while it could be set once and for all in the core MADT flags (32 bits, of which only one is in use). It is bad enough that there are two ways of getting the GICR regions. Why can't the properties that apply to all of the be common? Thanks, M.
On Tue, Oct 17, 2023 at 05:44:28PM +0100, Marc Zyngier wrote: > On Tue, 17 Oct 2023 15:19:46 +0100, > Lorenzo Pieralisi <lpieralisi@kernel.org> wrote: > > > > On Fri, Oct 06, 2023 at 02:59:29PM +0200, Lorenzo Pieralisi wrote: > > > The GIC architecture specification defines a set of registers > > > for redistributors and ITSes that control the sharebility and > > > cacheability attributes of redistributors/ITSes initiator ports > > > on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, > > > GITS_BASER<n>). > > > > > > Architecturally the GIC provides a means to drive shareability > > > and cacheability attributes signals and related IWB/OWB/ISH barriers > > > but it is not mandatory for designs to wire up the corresponding > > > interconnect signals that control the cacheability/shareability > > > of transactions. > > > > > > Redistributors and ITSes interconnect ports can be connected to > > > non-coherent interconnects that are not able to manage the > > > shareability/cacheability attributes; this implicitly makes > > > the redistributors and ITSes non-coherent observers. > > > > > > So far, the GIC driver on probe executes a write to "probe" for > > > the redistributors and ITSes registers shareability bitfields > > > by writing a value (ie InnerShareable - the shareability domain the > > > CPUs are in) and check it back to detect whether the value sticks or > > > not; this hinges on a GIC programming model behaviour that predates the > > > current specifications, that just define shareability bits as writeable > > > but do not guarantee that writing certain shareability values > > > enable the expected behaviour for the redistributors/ITSes > > > memory interconnect ports. > > > > > > To enable non-coherent GIC designs on ACPI based systems, parse the MADT > > > GICC/GICR/ITS subtables non-coherent flags to determine whether the > > > respective components are non-coherent observers and force the shareability > > > attributes to be programmed into the redistributors and ITSes registers. > > > > > > An ACPI global function (acpi_get_madt_revision()) is added to retrieve > > > the MADT revision, in that it is essential to check the MADT revision > > > before checking for flags that were added with MADT revision 7 so that > > > if the kernel is booted with ACPI tables (MADT rev < 7) it skips parsing > > > the newly added flags (that should be zeroed reserved values for MADT > > > versions < 7 but they could turn out to be buggy and should be ignored). > > > > > > Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > > > Cc: Robin Murphy <robin.murphy@arm.com> > > > Cc: Mark Rutland <mark.rutland@arm.com> > > > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > > > Cc: Marc Zyngier <maz@kernel.org> > > > --- > > > drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ > > > drivers/irqchip/irq-gic-common.h | 8 ++++++++ > > > drivers/irqchip/irq-gic-v3-its.c | 4 ++++ > > > drivers/irqchip/irq-gic-v3.c | 9 +++++++++ > > > include/linux/acpi.h | 3 +++ > > > 5 files changed, 45 insertions(+) > > > > Hi Marc, > > > > just a quick note to ask if, from an ACPI binding POW > > I guess you mean POV. POW has an entirely different meaning... :-/ > > > this patch and related approach make sense to you. > > > > If so, we can start the process to get the ACPI changes drafted > > in: > > > > https://bugzilla.tianocore.org/show_bug.cgi?id=4557 > > > > and deployed in this patch into the ACPI specs, I can log > > an "ACK" in the tianocoreBZ entry above (we will be able to > > rework the code as much as we want, this is just for the > > bindings). > > I'm OK with the overall shape of it. However, I wonder what the > rationale is for spreading the redistributor property all over the map > (in both GICC and GICR structures), while it could be set once and for > all in the core MADT flags (32 bits, of which only one is in use). > > It is bad enough that there are two ways of getting the GICR regions. > Why can't the properties that apply to all of the be common? I don't think we are allowed to add arch specific flags to the MADT since those, supposedly, are cross-architecture (and the only one defined is quite old, though x86 specific). The reason behind spreading the property is the nature of GICC/GICR subtables themselves - we wanted to apply flags only in subtables relevant to the components in question. We could try to add a global flag to the MADT but I would not be surprised if the ECR would be rejected then for the reason I explained above. Thanks, Lorenzo
On Wed, 18 Oct 2023 09:42:14 +0100, Lorenzo Pieralisi <lpieralisi@kernel.org> wrote: > > On Tue, Oct 17, 2023 at 05:44:28PM +0100, Marc Zyngier wrote: > > On Tue, 17 Oct 2023 15:19:46 +0100, > > Lorenzo Pieralisi <lpieralisi@kernel.org> wrote: > > > > > > On Fri, Oct 06, 2023 at 02:59:29PM +0200, Lorenzo Pieralisi wrote: > > > > The GIC architecture specification defines a set of registers > > > > for redistributors and ITSes that control the sharebility and > > > > cacheability attributes of redistributors/ITSes initiator ports > > > > on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, > > > > GITS_BASER<n>). > > > > > > > > Architecturally the GIC provides a means to drive shareability > > > > and cacheability attributes signals and related IWB/OWB/ISH barriers > > > > but it is not mandatory for designs to wire up the corresponding > > > > interconnect signals that control the cacheability/shareability > > > > of transactions. > > > > > > > > Redistributors and ITSes interconnect ports can be connected to > > > > non-coherent interconnects that are not able to manage the > > > > shareability/cacheability attributes; this implicitly makes > > > > the redistributors and ITSes non-coherent observers. > > > > > > > > So far, the GIC driver on probe executes a write to "probe" for > > > > the redistributors and ITSes registers shareability bitfields > > > > by writing a value (ie InnerShareable - the shareability domain the > > > > CPUs are in) and check it back to detect whether the value sticks or > > > > not; this hinges on a GIC programming model behaviour that predates the > > > > current specifications, that just define shareability bits as writeable > > > > but do not guarantee that writing certain shareability values > > > > enable the expected behaviour for the redistributors/ITSes > > > > memory interconnect ports. > > > > > > > > To enable non-coherent GIC designs on ACPI based systems, parse the MADT > > > > GICC/GICR/ITS subtables non-coherent flags to determine whether the > > > > respective components are non-coherent observers and force the shareability > > > > attributes to be programmed into the redistributors and ITSes registers. > > > > > > > > An ACPI global function (acpi_get_madt_revision()) is added to retrieve > > > > the MADT revision, in that it is essential to check the MADT revision > > > > before checking for flags that were added with MADT revision 7 so that > > > > if the kernel is booted with ACPI tables (MADT rev < 7) it skips parsing > > > > the newly added flags (that should be zeroed reserved values for MADT > > > > versions < 7 but they could turn out to be buggy and should be ignored). > > > > > > > > Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> > > > > Cc: Robin Murphy <robin.murphy@arm.com> > > > > Cc: Mark Rutland <mark.rutland@arm.com> > > > > Cc: "Rafael J. Wysocki" <rafael@kernel.org> > > > > Cc: Marc Zyngier <maz@kernel.org> > > > > --- > > > > drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ > > > > drivers/irqchip/irq-gic-common.h | 8 ++++++++ > > > > drivers/irqchip/irq-gic-v3-its.c | 4 ++++ > > > > drivers/irqchip/irq-gic-v3.c | 9 +++++++++ > > > > include/linux/acpi.h | 3 +++ > > > > 5 files changed, 45 insertions(+) > > > > > > Hi Marc, > > > > > > just a quick note to ask if, from an ACPI binding POW > > > > I guess you mean POV. POW has an entirely different meaning... :-/ > > > > > this patch and related approach make sense to you. > > > > > > If so, we can start the process to get the ACPI changes drafted > > > in: > > > > > > https://bugzilla.tianocore.org/show_bug.cgi?id=4557 > > > > > > and deployed in this patch into the ACPI specs, I can log > > > an "ACK" in the tianocoreBZ entry above (we will be able to > > > rework the code as much as we want, this is just for the > > > bindings). > > > > I'm OK with the overall shape of it. However, I wonder what the > > rationale is for spreading the redistributor property all over the map > > (in both GICC and GICR structures), while it could be set once and for > > all in the core MADT flags (32 bits, of which only one is in use). > > > > It is bad enough that there are two ways of getting the GICR regions. > > Why can't the properties that apply to all of the be common? > > I don't think we are allowed to add arch specific flags to the MADT > since those, supposedly, are cross-architecture (and the only one > defined is quite old, though x86 specific). There is nothing that is truly cross-arch in this table. *everything* in MADT is arch-specific. > The reason behind spreading the property is the nature of GICC/GICR > subtables themselves - we wanted to apply flags only in subtables > relevant to the components in question. > > We could try to add a global flag to the MADT but I would not be > surprised if the ECR would be rejected then for the reason I explained > above. I don't think that's much of a reason, but I really don't care enough about this to argue otherwise. M.
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 7dd6dbaa98c3..d3c7c6b0bb23 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -215,6 +215,27 @@ phys_cpuid_t __init acpi_map_madt_entry(u32 acpi_id) return rv; } +u8 __init acpi_get_madt_revision(void) +{ + static u8 madt_revision __initdata; + static bool madt_read __initdata; + struct acpi_table_header *madt = NULL; + + if (!madt_read) { + madt_read = true; + + acpi_get_table(ACPI_SIG_MADT, 0, &madt); + if (!madt) + return madt_revision; + + madt_revision = madt->revision; + + acpi_put_table(madt); + } + + return madt_revision; +} + static phys_cpuid_t map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; diff --git a/drivers/irqchip/irq-gic-common.h b/drivers/irqchip/irq-gic-common.h index f407cce9ecaa..8dffee95f7e8 100644 --- a/drivers/irqchip/irq-gic-common.h +++ b/drivers/irqchip/irq-gic-common.h @@ -6,6 +6,7 @@ #ifndef _IRQ_GIC_COMMON_H #define _IRQ_GIC_COMMON_H +#include <linux/acpi.h> #include <linux/of.h> #include <linux/irqdomain.h> #include <linux/irqchip/arm-gic-common.h> @@ -29,6 +30,13 @@ void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks, void gic_enable_of_quirks(const struct device_node *np, const struct gic_quirk *quirks, void *data); +#ifdef CONFIG_ACPI +static inline bool gic_acpi_non_coherent_flag(u32 flags, u32 mask) +{ + return (acpi_get_madt_revision() >= 7) && (flags & mask); +} +#endif + #define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0) #define RDIST_FLAGS_RD_TABLES_PREALLOCATED (1 << 1) #define RDIST_FLAGS_FORCE_NON_SHAREABLE (1 << 2) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 75a2dd550625..72ae9422a26f 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -5574,6 +5574,10 @@ static int __init gic_acpi_parse_madt_its(union acpi_subtable_headers *header, goto node_err; } + if (gic_acpi_non_coherent_flag(its_entry->flags, + ACPI_MADT_ITS_NON_COHERENT)) + its->flags |= ITS_FLAGS_FORCE_NON_SHAREABLE; + err = its_probe_one(its); if (!err) return 0; diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index f59ac9586b7b..720d76790ada 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -2364,6 +2364,11 @@ gic_acpi_parse_madt_redist(union acpi_subtable_headers *header, pr_err("Couldn't map GICR region @%llx\n", redist->base_address); return -ENOMEM; } + + if (gic_acpi_non_coherent_flag(redist->flags, + ACPI_MADT_GICR_NON_COHERENT)) + gic_data.rdists.flags |= RDIST_FLAGS_FORCE_NON_SHAREABLE; + gic_request_region(redist->base_address, redist->length, "GICR"); gic_acpi_register_redist(redist->base_address, redist_base); @@ -2389,6 +2394,10 @@ gic_acpi_parse_madt_gicc(union acpi_subtable_headers *header, return -ENOMEM; gic_request_region(gicc->gicr_base_address, size, "GICR"); + if (gic_acpi_non_coherent_flag(gicc->flags, + ACPI_MADT_GICC_NON_COHERENT)) + gic_data.rdists.flags |= RDIST_FLAGS_FORCE_NON_SHAREABLE; + gic_acpi_register_redist(gicc->gicr_base_address, redist_base); return 0; } diff --git a/include/linux/acpi.h b/include/linux/acpi.h index a73246c3c35e..56e4e5f39a62 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -298,6 +298,9 @@ static inline bool invalid_phys_cpuid(phys_cpuid_t phys_id) return phys_id == PHYS_CPUID_INVALID; } + +u8 __init acpi_get_madt_revision(void); + /* Validate the processor object's proc_id */ bool acpi_duplicate_processor_id(int proc_id); /* Processor _CTS control */
The GIC architecture specification defines a set of registers for redistributors and ITSes that control the sharebility and cacheability attributes of redistributors/ITSes initiator ports on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>). Architecturally the GIC provides a means to drive shareability and cacheability attributes signals and related IWB/OWB/ISH barriers but it is not mandatory for designs to wire up the corresponding interconnect signals that control the cacheability/shareability of transactions. Redistributors and ITSes interconnect ports can be connected to non-coherent interconnects that are not able to manage the shareability/cacheability attributes; this implicitly makes the redistributors and ITSes non-coherent observers. So far, the GIC driver on probe executes a write to "probe" for the redistributors and ITSes registers shareability bitfields by writing a value (ie InnerShareable - the shareability domain the CPUs are in) and check it back to detect whether the value sticks or not; this hinges on a GIC programming model behaviour that predates the current specifications, that just define shareability bits as writeable but do not guarantee that writing certain shareability values enable the expected behaviour for the redistributors/ITSes memory interconnect ports. To enable non-coherent GIC designs on ACPI based systems, parse the MADT GICC/GICR/ITS subtables non-coherent flags to determine whether the respective components are non-coherent observers and force the shareability attributes to be programmed into the redistributors and ITSes registers. An ACPI global function (acpi_get_madt_revision()) is added to retrieve the MADT revision, in that it is essential to check the MADT revision before checking for flags that were added with MADT revision 7 so that if the kernel is booted with ACPI tables (MADT rev < 7) it skips parsing the newly added flags (that should be zeroed reserved values for MADT versions < 7 but they could turn out to be buggy and should be ignored). Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Marc Zyngier <maz@kernel.org> --- drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ drivers/irqchip/irq-gic-common.h | 8 ++++++++ drivers/irqchip/irq-gic-v3-its.c | 4 ++++ drivers/irqchip/irq-gic-v3.c | 9 +++++++++ include/linux/acpi.h | 3 +++ 5 files changed, 45 insertions(+)