| Message ID | 20231017115238.18309-6-quintela@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Migration deprecated parts | expand |
Juan Quintela <quintela@redhat.com> writes: > Signed-off-by: Juan Quintela <quintela@redhat.com> > Acked-by: Stefan Hajnoczi <stefanha@redhat.com> > Acked-by: Peter Xu <peterx@redhat.com> > --- > docs/about/deprecated.rst | 8 ++++ > qapi/migration.json | 79 +++++++++++++++++++++++++-------------- > migration/options.c | 13 +++++++ > 3 files changed, 72 insertions(+), 28 deletions(-) > > diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst > index 5eaf096040..f46baf9ee9 100644 > --- a/docs/about/deprecated.rst > +++ b/docs/about/deprecated.rst > @@ -489,3 +489,11 @@ Please see "QMP invocation for live storage migration with > ``blockdev-mirror`` + NBD" in docs/interop/live-block-operations.rst > for a detailed explanation. > > +old compression method (since 8.2) > +'''''''''''''''''''''''''''''''''' > + > +Compression method fails too much. Too many races. We are going to > +remove it if nobody fixes it. For starters, migration-test > +compression tests are disabled becase they fail randomly. If you need > +compression, use multifd compression methods. > + > diff --git a/qapi/migration.json b/qapi/migration.json > index c7633b22c0..834506a02b 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -272,6 +272,10 @@ > # Features: > # > # @deprecated: Member @disk is deprecated because block migration is. > +# Member @compression is deprecated because it is unreliable and > +# untested. It is recommended to use multifd migration, which > +# offers an alternative compression implementation that is > +# reliable and tested. Two spaces between sentences for consistency, please. > # > # Since: 0.14 > ## > @@ -289,7 +293,7 @@ > '*blocked-reasons': ['str'], > '*postcopy-blocktime': 'uint32', > '*postcopy-vcpu-blocktime': ['uint32'], > - '*compression': 'CompressionStats', > + '*compression': { 'type': 'CompressionStats', 'features': [ 'deprecated' ] }, > '*socket-address': ['SocketAddress'], > '*dirty-limit-throttle-time-per-round': 'uint64', > '*dirty-limit-ring-full-time': 'uint64'} } > @@ -530,7 +534,10 @@ > # Features: > # > # @deprecated: Member @block is deprecated. Use blockdev-mirror with > -# NBD instead. > +# NBD instead. Member @compression is deprecated because it is > +# unreliable and untested. It is recommended to use multifd > +# migration, which offers an alternative compression > +# implementation that is reliable and tested. Likewise. > # > # @unstable: Members @x-colo and @x-ignore-shared are experimental. > # > @@ -538,7 +545,8 @@ > ## > { 'enum': 'MigrationCapability', > 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks', > - 'compress', 'events', 'postcopy-ram', > + { 'name': 'compress', 'features': [ 'deprecated' ] }, > + 'events', 'postcopy-ram', > { 'name': 'x-colo', 'features': [ 'unstable' ] }, > 'release-ram', > { 'name': 'block', 'features': [ 'deprecated' ] }, > @@ -844,7 +852,9 @@ > # Features: > # > # @deprecated: Member @block-incremental is deprecated. Use > -# blockdev-mirror with NBD instead. > +# blockdev-mirror with NBD instead. Members @compress-level, > +# @compress-threads, @decompress-threads and @compress-wait-thread > +# are deprecated because @compression is deprecated. Likewise. > # > # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period > # are experimental. > @@ -854,8 +864,11 @@ > { 'enum': 'MigrationParameter', > 'data': ['announce-initial', 'announce-max', > 'announce-rounds', 'announce-step', > - 'compress-level', 'compress-threads', 'decompress-threads', > - 'compress-wait-thread', 'throttle-trigger-threshold', > + { 'name': 'compress-level', 'features': [ 'deprecated' ] }, > + { 'name': 'compress-threads', 'features': [ 'deprecated' ] }, > + { 'name': 'decompress-threads', 'features': [ 'deprecated' ] }, > + { 'name': 'compress-wait-thread', 'features': [ 'deprecated' ] }, > + 'throttle-trigger-threshold', > 'cpu-throttle-initial', 'cpu-throttle-increment', > 'cpu-throttle-tailslow', > 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth', > @@ -885,16 +898,16 @@ > # @announce-step: Increase in delay (in milliseconds) between > # subsequent packets in the announcement (Since 4.0) > # > -# @compress-level: compression level > +# @compress-level: compression level. > # > -# @compress-threads: compression thread count > +# @compress-threads: compression thread count. > # > # @compress-wait-thread: Controls behavior when all compression > # threads are currently busy. If true (default), wait for a free > # compression thread to become available; otherwise, send the page > -# uncompressed. (Since 3.1) > +# uncompressed. (Since 3.1) > # > -# @decompress-threads: decompression thread count > +# @decompress-threads: decompression thread count. > # > # @throttle-trigger-threshold: The ratio of bytes_dirty_period and > # bytes_xfer_period to trigger throttling. It is expressed as Unrelated. > @@ -1023,7 +1036,9 @@ > # Features: > # > # @deprecated: Member @block-incremental is deprecated. Use > -# blockdev-mirror with NBD instead. > +# blockdev-mirror with NBD instead. Members @compress-level, > +# @compress-threads, @decompress-threads and @compress-wait-thread > +# are deprecated because @compression is deprecated. Two spaces between sentences for consistency, please. > # > # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period > # are experimental. > @@ -1038,10 +1053,14 @@ > '*announce-max': 'size', > '*announce-rounds': 'size', > '*announce-step': 'size', > - '*compress-level': 'uint8', > - '*compress-threads': 'uint8', > - '*compress-wait-thread': 'bool', > - '*decompress-threads': 'uint8', > + '*compress-level': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > + '*compress-threads': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > + '*compress-wait-thread': { 'type': 'bool', > + 'features': [ 'deprecated' ] }, > + '*decompress-threads': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > '*throttle-trigger-threshold': 'uint8', > '*cpu-throttle-initial': 'uint8', > '*cpu-throttle-increment': 'uint8', > @@ -1078,7 +1097,7 @@ > # Example: > # > # -> { "execute": "migrate-set-parameters" , > -# "arguments": { "compress-level": 1 } } > +# "arguments": { "multifd-channels": 5 } } > # <- { "return": {} } > ## Thanks for taking care of updating the example! > { 'command': 'migrate-set-parameters', 'boxed': true, > @@ -1101,16 +1120,16 @@ > # @announce-step: Increase in delay (in milliseconds) between > # subsequent packets in the announcement (Since 4.0) > # > -# @compress-level: compression level > +# @compress-level: compression level. > # > -# @compress-threads: compression thread count > +# @compress-threads: compression thread count. > # > # @compress-wait-thread: Controls behavior when all compression > # threads are currently busy. If true (default), wait for a free > # compression thread to become available; otherwise, send the page > -# uncompressed. (Since 3.1) > +# uncompressed. (Since 3.1) > # > -# @decompress-threads: decompression thread count > +# @decompress-threads: decompression thread count. > # > # @throttle-trigger-threshold: The ratio of bytes_dirty_period and > # bytes_xfer_period to trigger throttling. It is expressed as Unrelated. > @@ -1241,7 +1260,9 @@ > # Features: > # > # @deprecated: Member @block-incremental is deprecated. Use > -# blockdev-mirror with NBD instead. > +# blockdev-mirror with NBD instead. Members @compress-level, > +# @compress-threads, @decompress-threads and @compress-wait-thread > +# are deprecated because @compression is deprecated. Two spaces between sentences for consistency, please. > # > # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period > # are experimental. > @@ -1253,10 +1274,14 @@ > '*announce-max': 'size', > '*announce-rounds': 'size', > '*announce-step': 'size', > - '*compress-level': 'uint8', > - '*compress-threads': 'uint8', > - '*compress-wait-thread': 'bool', > - '*decompress-threads': 'uint8', > + '*compress-level': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > + '*compress-threads': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > + '*compress-wait-thread': { 'type': 'bool', > + 'features': [ 'deprecated' ] }, > + '*decompress-threads': { 'type': 'uint8', > + 'features': [ 'deprecated' ] }, > '*throttle-trigger-threshold': 'uint8', > '*cpu-throttle-initial': 'uint8', > '*cpu-throttle-increment': 'uint8', > @@ -1296,10 +1321,8 @@ > # > # -> { "execute": "query-migrate-parameters" } > # <- { "return": { > -# "decompress-threads": 2, > +# "multifd-channels": 2, > # "cpu-throttle-increment": 10, > -# "compress-threads": 8, > -# "compress-level": 1, > # "cpu-throttle-initial": 20, > # "max-bandwidth": 33554432, > # "downtime-limit": 300 Thanks again! > diff --git a/migration/options.c b/migration/options.c > index 0d0a3f8edb..7cb99a82a5 100644 > --- a/migration/options.c > +++ b/migration/options.c > @@ -483,6 +483,11 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp) > "Use blockdev-mirror with NBD instead."); > } > > + if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) { > + warn_report("Old compression method is deprecated. " > + "Use multifd compression methods instead."); > + } > + > #ifndef CONFIG_REPLICATION > if (new_caps[MIGRATION_CAPABILITY_X_COLO]) { > error_setg(errp, "QEMU compiled without replication module" > @@ -1321,18 +1326,26 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp) > /* TODO use QAPI_CLONE() instead of duplicating it inline */ > > if (params->has_compress_level) { > + warn_report("Old compression is deprecated. " > + "Use multifd compression methods instead."); > s->parameters.compress_level = params->compress_level; > } > > if (params->has_compress_threads) { > + warn_report("Old compression is deprecated. " > + "Use multifd compression methods instead."); > s->parameters.compress_threads = params->compress_threads; > } > > if (params->has_compress_wait_thread) { > + warn_report("Old compression is deprecated. " > + "Use multifd compression methods instead."); > s->parameters.compress_wait_thread = params->compress_wait_thread; > } > > if (params->has_decompress_threads) { > + warn_report("Old compression is deprecated. " > + "Use multifd compression methods instead."); > s->parameters.decompress_threads = params->decompress_threads; > } Other than that Reviewed-by: Markus Armbruster <armbru@redhat.com>
Markus Armbruster <armbru@redhat.com> wrote: > Juan Quintela <quintela@redhat.com> writes: > >> Signed-off-by: Juan Quintela <quintela@redhat.com> >> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> >> Acked-by: Peter Xu <peterx@redhat.com> >> # @deprecated: Member @disk is deprecated because block migration is. >> +# Member @compression is deprecated because it is unreliable and >> +# untested. It is recommended to use multifd migration, which >> +# offers an alternative compression implementation that is >> +# reliable and tested. > > Two spaces between sentences for consistency, please. I have reviewed all the patches again. Let's hope that I didn't miss one. >> # @announce-step: Increase in delay (in milliseconds) between >> # subsequent packets in the announcement (Since 4.0) >> # >> -# @compress-level: compression level >> +# @compress-level: compression level. >> # >> -# @compress-threads: compression thread count >> +# @compress-threads: compression thread count. >> # >> # @compress-wait-thread: Controls behavior when all compression >> # threads are currently busy. If true (default), wait for a free >> # compression thread to become available; otherwise, send the page >> -# uncompressed. (Since 3.1) >> +# uncompressed. (Since 3.1) >> # >> -# @decompress-threads: decompression thread count >> +# @decompress-threads: decompression thread count. >> # >> # @throttle-trigger-threshold: The ratio of bytes_dirty_period and >> # bytes_xfer_period to trigger throttling. It is expressed as > > Unrelated. Rebases are bad for you O:-) >> @@ -1023,7 +1036,9 @@ >> # Features: >> # >> # @deprecated: Member @block-incremental is deprecated. Use >> -# blockdev-mirror with NBD instead. >> +# blockdev-mirror with NBD instead. Members @compress-level, >> +# @compress-threads, @decompress-threads and @compress-wait-thread >> +# are deprecated because @compression is deprecated. > > Two spaces between sentences for consistency, please. Done. >> @@ -1078,7 +1097,7 @@ >> # Example: >> # >> # -> { "execute": "migrate-set-parameters" , >> -# "arguments": { "compress-level": 1 } } >> +# "arguments": { "multifd-channels": 5 } } >> # <- { "return": {} } >> ## > > Thanks for taking care of updating the example! You are welcome. grep for all occurences of compress-level and friends has its advantages. >> # @compress-wait-thread: Controls behavior when all compression >> # threads are currently busy. If true (default), wait for a free >> # compression thread to become available; otherwise, send the page >> -# uncompressed. (Since 3.1) >> +# uncompressed. (Since 3.1) >> # >> -# @decompress-threads: decompression thread count >> +# @decompress-threads: decompression thread count. >> # >> # @throttle-trigger-threshold: The ratio of bytes_dirty_period and >> # bytes_xfer_period to trigger throttling. It is expressed as > > Unrelated. I have removed the periods. But I have a question, why the descriptions that are less than one line don't have period and the other have it. >> if (params->has_compress_level) { >> + warn_report("Old compression is deprecated. " >> + "Use multifd compression methods instead."); >> s->parameters.compress_level = params->compress_level; >> } >> >> if (params->has_compress_threads) { >> + warn_report("Old compression is deprecated. " >> + "Use multifd compression methods instead."); >> s->parameters.compress_threads = params->compress_threads; >> } >> >> if (params->has_compress_wait_thread) { >> + warn_report("Old compression is deprecated. " >> + "Use multifd compression methods instead."); >> s->parameters.compress_wait_thread = params->compress_wait_thread; >> } >> >> if (params->has_decompress_threads) { >> + warn_report("Old compression is deprecated. " Once here, I did s/Old/old/ as all your examples of description start with lowercase. >> + "Use multifd compression methods instead."); >> s->parameters.decompress_threads = params->decompress_threads; >> } > > Other than that > Reviewed-by: Markus Armbruster <armbru@redhat.com> Thanks for your patience.
Juan Quintela <quintela@redhat.com> writes: > Markus Armbruster <armbru@redhat.com> wrote: >> Juan Quintela <quintela@redhat.com> writes: >> >>> Signed-off-by: Juan Quintela <quintela@redhat.com> >>> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> >>> Acked-by: Peter Xu <peterx@redhat.com> > > >>> # @deprecated: Member @disk is deprecated because block migration is. >>> +# Member @compression is deprecated because it is unreliable and >>> +# untested. It is recommended to use multifd migration, which >>> +# offers an alternative compression implementation that is >>> +# reliable and tested. >> >> Two spaces between sentences for consistency, please. > > I have reviewed all the patches again. Let's hope that I didn't miss > one. > >>> # @announce-step: Increase in delay (in milliseconds) between >>> # subsequent packets in the announcement (Since 4.0) >>> # >>> -# @compress-level: compression level >>> +# @compress-level: compression level. >>> # >>> -# @compress-threads: compression thread count >>> +# @compress-threads: compression thread count. >>> # >>> # @compress-wait-thread: Controls behavior when all compression >>> # threads are currently busy. If true (default), wait for a free >>> # compression thread to become available; otherwise, send the page >>> -# uncompressed. (Since 3.1) >>> +# uncompressed. (Since 3.1) >>> # >>> -# @decompress-threads: decompression thread count >>> +# @decompress-threads: decompression thread count. >>> # >>> # @throttle-trigger-threshold: The ratio of bytes_dirty_period and >>> # bytes_xfer_period to trigger throttling. It is expressed as >> >> Unrelated. > > Rebases are bad for you O:-) > >>> @@ -1023,7 +1036,9 @@ >>> # Features: >>> # >>> # @deprecated: Member @block-incremental is deprecated. Use >>> -# blockdev-mirror with NBD instead. >>> +# blockdev-mirror with NBD instead. Members @compress-level, >>> +# @compress-threads, @decompress-threads and @compress-wait-thread >>> +# are deprecated because @compression is deprecated. >> >> Two spaces between sentences for consistency, please. > > Done. >>> @@ -1078,7 +1097,7 @@ >>> # Example: >>> # >>> # -> { "execute": "migrate-set-parameters" , >>> -# "arguments": { "compress-level": 1 } } >>> +# "arguments": { "multifd-channels": 5 } } >>> # <- { "return": {} } >>> ## >> >> Thanks for taking care of updating the example! > > You are welcome. grep for all occurences of compress-level and friends > has its advantages. > >>> # @compress-wait-thread: Controls behavior when all compression >>> # threads are currently busy. If true (default), wait for a free >>> # compression thread to become available; otherwise, send the page >>> -# uncompressed. (Since 3.1) >>> +# uncompressed. (Since 3.1) >>> # >>> -# @decompress-threads: decompression thread count >>> +# @decompress-threads: decompression thread count. >>> # >>> # @throttle-trigger-threshold: The ratio of bytes_dirty_period and >>> # bytes_xfer_period to trigger throttling. It is expressed as >> >> Unrelated. > > I have removed the periods. > > But I have a question, why the descriptions that are less than one line > don't have period and the other have it. When the description consists of multiple sentences, we obviously need to end them with punctuation. Sometimes the description isn't a sentence, just a phrase, e.g. "decompression thread count". No punctuation then. Sometimes it's a single sentence. Then we roll dice. >>> if (params->has_compress_level) { >>> + warn_report("Old compression is deprecated. " >>> + "Use multifd compression methods instead."); >>> s->parameters.compress_level = params->compress_level; >>> } >>> >>> if (params->has_compress_threads) { >>> + warn_report("Old compression is deprecated. " >>> + "Use multifd compression methods instead."); >>> s->parameters.compress_threads = params->compress_threads; >>> } >>> >>> if (params->has_compress_wait_thread) { >>> + warn_report("Old compression is deprecated. " >>> + "Use multifd compression methods instead."); >>> s->parameters.compress_wait_thread = params->compress_wait_thread; >>> } >>> >>> if (params->has_decompress_threads) { >>> + warn_report("Old compression is deprecated. " > > Once here, I did s/Old/old/ > > as all your examples of description start with lowercase. Yes, please. >>> + "Use multifd compression methods instead."); >>> s->parameters.decompress_threads = params->decompress_threads; >>> } >> >> Other than that >> Reviewed-by: Markus Armbruster <armbru@redhat.com> > > Thanks for your patience.
diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 5eaf096040..f46baf9ee9 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -489,3 +489,11 @@ Please see "QMP invocation for live storage migration with ``blockdev-mirror`` + NBD" in docs/interop/live-block-operations.rst for a detailed explanation. +old compression method (since 8.2) +'''''''''''''''''''''''''''''''''' + +Compression method fails too much. Too many races. We are going to +remove it if nobody fixes it. For starters, migration-test +compression tests are disabled becase they fail randomly. If you need +compression, use multifd compression methods. + diff --git a/qapi/migration.json b/qapi/migration.json index c7633b22c0..834506a02b 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -272,6 +272,10 @@ # Features: # # @deprecated: Member @disk is deprecated because block migration is. +# Member @compression is deprecated because it is unreliable and +# untested. It is recommended to use multifd migration, which +# offers an alternative compression implementation that is +# reliable and tested. # # Since: 0.14 ## @@ -289,7 +293,7 @@ '*blocked-reasons': ['str'], '*postcopy-blocktime': 'uint32', '*postcopy-vcpu-blocktime': ['uint32'], - '*compression': 'CompressionStats', + '*compression': { 'type': 'CompressionStats', 'features': [ 'deprecated' ] }, '*socket-address': ['SocketAddress'], '*dirty-limit-throttle-time-per-round': 'uint64', '*dirty-limit-ring-full-time': 'uint64'} } @@ -530,7 +534,10 @@ # Features: # # @deprecated: Member @block is deprecated. Use blockdev-mirror with -# NBD instead. +# NBD instead. Member @compression is deprecated because it is +# unreliable and untested. It is recommended to use multifd +# migration, which offers an alternative compression +# implementation that is reliable and tested. # # @unstable: Members @x-colo and @x-ignore-shared are experimental. # @@ -538,7 +545,8 @@ ## { 'enum': 'MigrationCapability', 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks', - 'compress', 'events', 'postcopy-ram', + { 'name': 'compress', 'features': [ 'deprecated' ] }, + 'events', 'postcopy-ram', { 'name': 'x-colo', 'features': [ 'unstable' ] }, 'release-ram', { 'name': 'block', 'features': [ 'deprecated' ] }, @@ -844,7 +852,9 @@ # Features: # # @deprecated: Member @block-incremental is deprecated. Use -# blockdev-mirror with NBD instead. +# blockdev-mirror with NBD instead. Members @compress-level, +# @compress-threads, @decompress-threads and @compress-wait-thread +# are deprecated because @compression is deprecated. # # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period # are experimental. @@ -854,8 +864,11 @@ { 'enum': 'MigrationParameter', 'data': ['announce-initial', 'announce-max', 'announce-rounds', 'announce-step', - 'compress-level', 'compress-threads', 'decompress-threads', - 'compress-wait-thread', 'throttle-trigger-threshold', + { 'name': 'compress-level', 'features': [ 'deprecated' ] }, + { 'name': 'compress-threads', 'features': [ 'deprecated' ] }, + { 'name': 'decompress-threads', 'features': [ 'deprecated' ] }, + { 'name': 'compress-wait-thread', 'features': [ 'deprecated' ] }, + 'throttle-trigger-threshold', 'cpu-throttle-initial', 'cpu-throttle-increment', 'cpu-throttle-tailslow', 'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth', @@ -885,16 +898,16 @@ # @announce-step: Increase in delay (in milliseconds) between # subsequent packets in the announcement (Since 4.0) # -# @compress-level: compression level +# @compress-level: compression level. # -# @compress-threads: compression thread count +# @compress-threads: compression thread count. # # @compress-wait-thread: Controls behavior when all compression # threads are currently busy. If true (default), wait for a free # compression thread to become available; otherwise, send the page -# uncompressed. (Since 3.1) +# uncompressed. (Since 3.1) # -# @decompress-threads: decompression thread count +# @decompress-threads: decompression thread count. # # @throttle-trigger-threshold: The ratio of bytes_dirty_period and # bytes_xfer_period to trigger throttling. It is expressed as @@ -1023,7 +1036,9 @@ # Features: # # @deprecated: Member @block-incremental is deprecated. Use -# blockdev-mirror with NBD instead. +# blockdev-mirror with NBD instead. Members @compress-level, +# @compress-threads, @decompress-threads and @compress-wait-thread +# are deprecated because @compression is deprecated. # # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period # are experimental. @@ -1038,10 +1053,14 @@ '*announce-max': 'size', '*announce-rounds': 'size', '*announce-step': 'size', - '*compress-level': 'uint8', - '*compress-threads': 'uint8', - '*compress-wait-thread': 'bool', - '*decompress-threads': 'uint8', + '*compress-level': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, + '*compress-threads': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, + '*compress-wait-thread': { 'type': 'bool', + 'features': [ 'deprecated' ] }, + '*decompress-threads': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, '*throttle-trigger-threshold': 'uint8', '*cpu-throttle-initial': 'uint8', '*cpu-throttle-increment': 'uint8', @@ -1078,7 +1097,7 @@ # Example: # # -> { "execute": "migrate-set-parameters" , -# "arguments": { "compress-level": 1 } } +# "arguments": { "multifd-channels": 5 } } # <- { "return": {} } ## { 'command': 'migrate-set-parameters', 'boxed': true, @@ -1101,16 +1120,16 @@ # @announce-step: Increase in delay (in milliseconds) between # subsequent packets in the announcement (Since 4.0) # -# @compress-level: compression level +# @compress-level: compression level. # -# @compress-threads: compression thread count +# @compress-threads: compression thread count. # # @compress-wait-thread: Controls behavior when all compression # threads are currently busy. If true (default), wait for a free # compression thread to become available; otherwise, send the page -# uncompressed. (Since 3.1) +# uncompressed. (Since 3.1) # -# @decompress-threads: decompression thread count +# @decompress-threads: decompression thread count. # # @throttle-trigger-threshold: The ratio of bytes_dirty_period and # bytes_xfer_period to trigger throttling. It is expressed as @@ -1241,7 +1260,9 @@ # Features: # # @deprecated: Member @block-incremental is deprecated. Use -# blockdev-mirror with NBD instead. +# blockdev-mirror with NBD instead. Members @compress-level, +# @compress-threads, @decompress-threads and @compress-wait-thread +# are deprecated because @compression is deprecated. # # @unstable: Members @x-checkpoint-delay and @x-vcpu-dirty-limit-period # are experimental. @@ -1253,10 +1274,14 @@ '*announce-max': 'size', '*announce-rounds': 'size', '*announce-step': 'size', - '*compress-level': 'uint8', - '*compress-threads': 'uint8', - '*compress-wait-thread': 'bool', - '*decompress-threads': 'uint8', + '*compress-level': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, + '*compress-threads': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, + '*compress-wait-thread': { 'type': 'bool', + 'features': [ 'deprecated' ] }, + '*decompress-threads': { 'type': 'uint8', + 'features': [ 'deprecated' ] }, '*throttle-trigger-threshold': 'uint8', '*cpu-throttle-initial': 'uint8', '*cpu-throttle-increment': 'uint8', @@ -1296,10 +1321,8 @@ # # -> { "execute": "query-migrate-parameters" } # <- { "return": { -# "decompress-threads": 2, +# "multifd-channels": 2, # "cpu-throttle-increment": 10, -# "compress-threads": 8, -# "compress-level": 1, # "cpu-throttle-initial": 20, # "max-bandwidth": 33554432, # "downtime-limit": 300 diff --git a/migration/options.c b/migration/options.c index 0d0a3f8edb..7cb99a82a5 100644 --- a/migration/options.c +++ b/migration/options.c @@ -483,6 +483,11 @@ bool migrate_caps_check(bool *old_caps, bool *new_caps, Error **errp) "Use blockdev-mirror with NBD instead."); } + if (new_caps[MIGRATION_CAPABILITY_COMPRESS]) { + warn_report("Old compression method is deprecated. " + "Use multifd compression methods instead."); + } + #ifndef CONFIG_REPLICATION if (new_caps[MIGRATION_CAPABILITY_X_COLO]) { error_setg(errp, "QEMU compiled without replication module" @@ -1321,18 +1326,26 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp) /* TODO use QAPI_CLONE() instead of duplicating it inline */ if (params->has_compress_level) { + warn_report("Old compression is deprecated. " + "Use multifd compression methods instead."); s->parameters.compress_level = params->compress_level; } if (params->has_compress_threads) { + warn_report("Old compression is deprecated. " + "Use multifd compression methods instead."); s->parameters.compress_threads = params->compress_threads; } if (params->has_compress_wait_thread) { + warn_report("Old compression is deprecated. " + "Use multifd compression methods instead."); s->parameters.compress_wait_thread = params->compress_wait_thread; } if (params->has_decompress_threads) { + warn_report("Old compression is deprecated. " + "Use multifd compression methods instead."); s->parameters.decompress_threads = params->decompress_threads; }