| Message ID | 20231018-marvell-88e6152-wan-led-v4-2-3ee0c67383be@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | Create a binding for the Marvell MV88E6xxx DSA switches | expand |
On Wed, 18 Oct 2023 11:03:41 +0200, Linus Walleij wrote: > When adding a proper schema for the Marvell mx88e6xxx switch, > the scripts start complaining about this embedded example: > > dtschema/dtc warnings/errors: > net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > > Fix this up by extending the example with those properties in > the ports node. > > While we are at it, rename "ports" to "ethernet-ports" and rename > "switch" to "ethernet-switch" as this is recommended practice. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231018-marvell-88e6152-wan-led-v4-2-3ee0c67383be@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, Oct 18, 2023 at 12:32 PM Rob Herring <robh@kernel.org> wrote: > dtschema/dtc warnings/errors: > Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] Isn't that just because the bindings now come last in the series. Which is in response to a review comment, hence this warning didn't appear before. Yours, Linus Walleij
On Wed, Oct 18, 2023 at 11:03:41AM +0200, Linus Walleij wrote: > When adding a proper schema for the Marvell mx88e6xxx switch, > the scripts start complaining about this embedded example: > > dtschema/dtc warnings/errors: > net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > > Fix this up by extending the example with those properties in > the ports node. > > While we are at it, rename "ports" to "ethernet-ports" and rename > "switch" to "ethernet-switch" as this is recommended practice. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Wed, Oct 18, 2023 at 01:37:10PM +0200, Linus Walleij wrote: > On Wed, Oct 18, 2023 at 12:32 PM Rob Herring <robh@kernel.org> wrote: > > > dtschema/dtc warnings/errors: > > Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] > > Isn't that just because the bindings now come last in the series. > Which is in response to a review comment, hence this warning > didn't appear before. Yes. The only option that avoids this is squashing the 2 patches. I think it is fine to leave this as-is. Rob
On Thu, Oct 19, 2023 at 08:45:14AM -0500, Rob Herring wrote: > On Wed, Oct 18, 2023 at 01:37:10PM +0200, Linus Walleij wrote: > > On Wed, Oct 18, 2023 at 12:32 PM Rob Herring <robh@kernel.org> wrote: > > > > > dtschema/dtc warnings/errors: > > > Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] > > > > Isn't that just because the bindings now come last in the series. > > Which is in response to a review comment, hence this warning > > didn't appear before. > > Yes. The only option that avoids this is squashing the 2 patches. I > think it is fine to leave this as-is. > > Rob Anyway, I'm surprised that the bot would send this email, since the warning existed prior to this patch, and I would expect that the bot only notifies of newly introduced issues.
On Wed, Oct 18, 2023 at 11:03:41AM +0200, Linus Walleij wrote: > When adding a proper schema for the Marvell mx88e6xxx switch, > the scripts start complaining about this embedded example: > > dtschema/dtc warnings/errors: > net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' > is a required property > from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# > > Fix this up by extending the example with those properties in > the ports node. > > While we are at it, rename "ports" to "ethernet-ports" and rename > "switch" to "ethernet-switch" as this is recommended practice. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
On Thu, Oct 19, 2023 at 05:26:46PM +0300, Vladimir Oltean wrote: > On Thu, Oct 19, 2023 at 08:45:14AM -0500, Rob Herring wrote: > > On Wed, Oct 18, 2023 at 01:37:10PM +0200, Linus Walleij wrote: > > > On Wed, Oct 18, 2023 at 12:32 PM Rob Herring <robh@kernel.org> wrote: > > > > > > > dtschema/dtc warnings/errors: > > > > Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/ethernet-switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] > > > > > > Isn't that just because the bindings now come last in the series. > > > Which is in response to a review comment, hence this warning > > > didn't appear before. > > > > Yes. The only option that avoids this is squashing the 2 patches. I > > think it is fine to leave this as-is. > > > > Rob > > Anyway, I'm surprised that the bot would send this email, since the > warning existed prior to this patch, and I would expect that the bot > only notifies of newly introduced issues. Oh right. Except that the node name changed in this patch and that changed the error message. Rob
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 3a3325168048..ab838c1ffeed 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -50,11 +50,14 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0x0>; - ports { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + /* Port definitions */ };
When adding a proper schema for the Marvell mx88e6xxx switch, the scripts start complaining about this embedded example: dtschema/dtc warnings/errors: net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# Fix this up by extending the example with those properties in the ports node. While we are at it, rename "ports" to "ethernet-ports" and rename "switch" to "ethernet-switch" as this is recommended practice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)