| Message ID | 20231018074739.1234394-1-be286@163.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [V2] usb: gadget: f_uac1: add adaptive sync support for capture | expand |
On Wed, Oct 18, 2023 at 03:47:39PM +0800, Charles Yi wrote: > UAC1 has it's own freerunning clock and can update Host about > real clock frequency through feedback endpoint so Host can align > number of samples sent to the UAC1 to prevent overruns/underruns. > > Change UAC1 driver to make it configurable through additional > 'c_sync' configfs file. > > Default remains 'asynchronous' with possibility to switch it > to 'adaptive'. > > Changes in V2: > - Updated the indentation of commit message. > > Signed-off-by: Charles Yi <be286@163.com> > --- > drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ > drivers/usb/gadget/function/u_uac1.h | 2 ++ > 2 files changed, 32 insertions(+) > > diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c > index 6f0e1d803dc2..7a6fcb40bb46 100644 > --- a/drivers/usb/gadget/function/f_uac1.c > +++ b/drivers/usb/gadget/function/f_uac1.c > @@ -33,6 +33,8 @@ > #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ > || (_opts)->c_volume_present) > > +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) > + > struct f_uac1 { > struct g_audio g_audio; > u8 ac_intf, as_in_intf, as_out_intf; > @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { > .wLockDelay = cpu_to_le16(1), > }; > > +static struct usb_endpoint_descriptor as_fback_ep_desc = { > + .bLength = USB_DT_ENDPOINT_SIZE, > + .bDescriptorType = USB_DT_ENDPOINT, > + > + .bEndpointAddress = USB_DIR_IN, > + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, > + .wMaxPacketSize = cpu_to_le16(3), > + .bInterval = 1, > +}; > + > static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { > .bLength = 0, /* filled on rate setup */ > .bDescriptorType = USB_DT_CS_INTERFACE, > @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { > > (struct usb_descriptor_header *)&as_out_ep_desc, > (struct usb_descriptor_header *)&as_iso_out_desc, > + (struct usb_descriptor_header *)&as_fback_ep_desc, > > (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, > (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, > @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) > f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); > f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); > f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); > + if (EPOUT_FBACK_IN_EN(opts)) { > + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); > + } > } > if (EPIN_EN(opts)) { > f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); > @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) > ac_header_desc->baInterfaceNr[ba_iface_id++] = status; > uac1->as_out_intf = status; > uac1->as_out_alt = 0; > + > + if (EPOUT_FBACK_IN_EN(audio_opts)) { > + as_out_ep_desc.bmAttributes = > + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; > + as_out_interface_alt_1_desc.bNumEndpoints++; > + } > } > > if (EPIN_EN(audio_opts)) { > @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) > goto err_free_fu; > audio->out_ep = ep; > audio->out_ep->desc = &as_out_ep_desc; > + if (EPOUT_FBACK_IN_EN(audio_opts)) { > + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); > + if (!audio->in_ep_fback) { > + goto err_free_fu; > + } > + } > } > > if (EPIN_EN(audio_opts)) { > @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) > > opts->req_number = UAC1_DEF_REQ_NUM; > > + opts->c_sync = UAC1_DEF_CSYNC; > + > snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); > > return &opts->func_inst; > diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h > index f7a616760e31..c6e2271e8cdd 100644 > --- a/drivers/usb/gadget/function/u_uac1.h > +++ b/drivers/usb/gadget/function/u_uac1.h > @@ -27,6 +27,7 @@ > #define UAC1_DEF_MAX_DB 0 /* 0 dB */ > #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ > > +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC > > struct f_uac1_opts { > struct usb_function_instance func_inst; > @@ -56,6 +57,7 @@ struct f_uac1_opts { > > struct mutex lock; > int refcnt; > + int c_sync; > }; > > #endif /* __U_UAC1_H */ > -- > 2.34.1 > Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/process/submitting-patches.rst for what needs to be done here to properly describe this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
Dne 18. 10. 23 v 9:47 Charles Yi napsal(a): > UAC1 has it's own freerunning clock and can update Host about > real clock frequency through feedback endpoint so Host can align > number of samples sent to the UAC1 to prevent overruns/underruns. > > Change UAC1 driver to make it configurable through additional > 'c_sync' configfs file. > > Default remains 'asynchronous' with possibility to switch it > to 'adaptive'. Hi Charles, Please can you clarify more the adaptive EP IN scenario? I am aware that the f_uac2.c also allows defining c_sync type (that's what your patch is based on). IIUC the data production rate of adaptive source endpoint (i.e. EP IN) is controlled by feed forward messages from the host Quoting http://sdpha2.ucsd.edu/Lab_Equip_Manuals/usb_20.pdf page 73: "Adaptive source endpoints produce data at a rate that is controlled by the data sink. The sink provides feedback (refer to Section 5.12.4.2) to the source, which allows the source to know the desired data rate of the sink." While the current f_uac2 implementation generates feedback for EP OUT async (unlike f_uac1), I cannot find any support for incoming feed-forward messages from the host for EP IN adaptive case. Neither in f_uac1, of course. I am not sure if linux supports IN EP adaptive, but the MS UAC2 driver does not https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers#audio-streaming: "For the Adaptive IN case the driver doesn't support a feed forward endpoint. If such an endpoint is present in the alternate setting, it will be ignored. The driver handles the Adaptive IN stream in the same way as an Asynchronous IN stream." IIUC (and I may be wrong) all the c_sync param does in f_uac2 (and f_uac1 in your patch) is just changing the EP IN configuration flag, but the actual support for truly adaptive EP IN is not implemented. IMO there is no code which would accept the feed-forward message from the host and adjust the rate at which samples are consumed from the alsa buffer to EP IN packets (method u_audio_iso_complete https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/u_audio.c#L193 ) That pertains a bit to the first sentence of your patch - IMO it describes EP OUT async, but not EP IN adaptive. Thanks a lot for a bit of clarification. Pavel. > > Changes in V2: > - Updated the indentation of commit message. > > Signed-off-by: Charles Yi <be286@163.com> > --- > drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ > drivers/usb/gadget/function/u_uac1.h | 2 ++ > 2 files changed, 32 insertions(+) > > diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c > index 6f0e1d803dc2..7a6fcb40bb46 100644 > --- a/drivers/usb/gadget/function/f_uac1.c > +++ b/drivers/usb/gadget/function/f_uac1.c > @@ -33,6 +33,8 @@ > #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ > || (_opts)->c_volume_present) > > +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) > + > struct f_uac1 { > struct g_audio g_audio; > u8 ac_intf, as_in_intf, as_out_intf; > @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { > .wLockDelay = cpu_to_le16(1), > }; > > +static struct usb_endpoint_descriptor as_fback_ep_desc = { > + .bLength = USB_DT_ENDPOINT_SIZE, > + .bDescriptorType = USB_DT_ENDPOINT, > + > + .bEndpointAddress = USB_DIR_IN, > + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, > + .wMaxPacketSize = cpu_to_le16(3), > + .bInterval = 1, > +}; > + > static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { > .bLength = 0, /* filled on rate setup */ > .bDescriptorType = USB_DT_CS_INTERFACE, > @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { > > (struct usb_descriptor_header *)&as_out_ep_desc, > (struct usb_descriptor_header *)&as_iso_out_desc, > + (struct usb_descriptor_header *)&as_fback_ep_desc, > > (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, > (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, > @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) > f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); > f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); > f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); > + if (EPOUT_FBACK_IN_EN(opts)) { > + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); > + } > } > if (EPIN_EN(opts)) { > f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); > @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) > ac_header_desc->baInterfaceNr[ba_iface_id++] = status; > uac1->as_out_intf = status; > uac1->as_out_alt = 0; > + > + if (EPOUT_FBACK_IN_EN(audio_opts)) { > + as_out_ep_desc.bmAttributes = > + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; > + as_out_interface_alt_1_desc.bNumEndpoints++; > + } > } > > if (EPIN_EN(audio_opts)) { > @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) > goto err_free_fu; > audio->out_ep = ep; > audio->out_ep->desc = &as_out_ep_desc; > + if (EPOUT_FBACK_IN_EN(audio_opts)) { > + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); > + if (!audio->in_ep_fback) { > + goto err_free_fu; > + } > + } > } > > if (EPIN_EN(audio_opts)) { > @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) > > opts->req_number = UAC1_DEF_REQ_NUM; > > + opts->c_sync = UAC1_DEF_CSYNC; > + > snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); > > return &opts->func_inst; > diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h > index f7a616760e31..c6e2271e8cdd 100644 > --- a/drivers/usb/gadget/function/u_uac1.h > +++ b/drivers/usb/gadget/function/u_uac1.h > @@ -27,6 +27,7 @@ > #define UAC1_DEF_MAX_DB 0 /* 0 dB */ > #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ > > +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC > > struct f_uac1_opts { > struct usb_function_instance func_inst; > @@ -56,6 +57,7 @@ struct f_uac1_opts { > > struct mutex lock; > int refcnt; > + int c_sync; > }; > > #endif /* __U_UAC1_H */
Hi Pavel, Feedback endpoint works for uca1 capture, means "EPOUT_EN". Charles Yi At 2023-10-18 17:52:20, "Pavel Hofman" <pavel.hofman@ivitera.com> wrote: > > >Dne 18. 10. 23 v 9:47 Charles Yi napsal(a): >> UAC1 has it's own freerunning clock and can update Host about >> real clock frequency through feedback endpoint so Host can align >> number of samples sent to the UAC1 to prevent overruns/underruns. >> >> Change UAC1 driver to make it configurable through additional >> 'c_sync' configfs file. >> >> Default remains 'asynchronous' with possibility to switch it >> to 'adaptive'. > > >Hi Charles, > >Please can you clarify more the adaptive EP IN scenario? I am aware that >the f_uac2.c also allows defining c_sync type (that's what your patch is >based on). > >IIUC the data production rate of adaptive source endpoint (i.e. EP IN) >is controlled by feed forward messages from the host >Quoting http://sdpha2.ucsd.edu/Lab_Equip_Manuals/usb_20.pdf page 73: > >"Adaptive source endpoints produce data at a rate that is controlled by >the data sink. The sink provides feedback (refer to Section 5.12.4.2) to >the source, which allows the source to know the desired data rate of the >sink." > >While the current f_uac2 implementation generates feedback for EP OUT >async (unlike f_uac1), I cannot find any support for incoming >feed-forward messages from the host for EP IN adaptive case. Neither in >f_uac1, of course. > >I am not sure if linux supports IN EP adaptive, but the MS UAC2 driver >does not >https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers#audio-streaming: > >"For the Adaptive IN case the driver doesn't support a feed forward >endpoint. If such an endpoint is present in the alternate setting, it >will be ignored. The driver handles the Adaptive IN stream in the same >way as an Asynchronous IN stream." > >IIUC (and I may be wrong) all the c_sync param does in f_uac2 (and >f_uac1 in your patch) is just changing the EP IN configuration flag, but >the actual support for truly adaptive EP IN is not implemented. IMO >there is no code which would accept the feed-forward message from the >host and adjust the rate at which samples are consumed from the alsa >buffer to EP IN packets (method u_audio_iso_complete >https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/u_audio.c#L193 >) > >That pertains a bit to the first sentence of your patch - IMO it >describes EP OUT async, but not EP IN adaptive. > >Thanks a lot for a bit of clarification. > >Pavel. > > >> >> Changes in V2: >> - Updated the indentation of commit message. >> >> Signed-off-by: Charles Yi <be286@163.com> >> --- >> drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ >> drivers/usb/gadget/function/u_uac1.h | 2 ++ >> 2 files changed, 32 insertions(+) >> >> diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c >> index 6f0e1d803dc2..7a6fcb40bb46 100644 >> --- a/drivers/usb/gadget/function/f_uac1.c >> +++ b/drivers/usb/gadget/function/f_uac1.c >> @@ -33,6 +33,8 @@ >> #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ >> || (_opts)->c_volume_present) >> >> +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) >> + >> struct f_uac1 { >> struct g_audio g_audio; >> u8 ac_intf, as_in_intf, as_out_intf; >> @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { >> .wLockDelay = cpu_to_le16(1), >> }; >> >> +static struct usb_endpoint_descriptor as_fback_ep_desc = { >> + .bLength = USB_DT_ENDPOINT_SIZE, >> + .bDescriptorType = USB_DT_ENDPOINT, >> + >> + .bEndpointAddress = USB_DIR_IN, >> + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, >> + .wMaxPacketSize = cpu_to_le16(3), >> + .bInterval = 1, >> +}; >> + >> static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { >> .bLength = 0, /* filled on rate setup */ >> .bDescriptorType = USB_DT_CS_INTERFACE, >> @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { >> >> (struct usb_descriptor_header *)&as_out_ep_desc, >> (struct usb_descriptor_header *)&as_iso_out_desc, >> + (struct usb_descriptor_header *)&as_fback_ep_desc, >> >> (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, >> (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, >> @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) >> f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); >> f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); >> f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); >> + if (EPOUT_FBACK_IN_EN(opts)) { >> + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); >> + } >> } >> if (EPIN_EN(opts)) { >> f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); >> @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >> ac_header_desc->baInterfaceNr[ba_iface_id++] = status; >> uac1->as_out_intf = status; >> uac1->as_out_alt = 0; >> + >> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >> + as_out_ep_desc.bmAttributes = >> + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; >> + as_out_interface_alt_1_desc.bNumEndpoints++; >> + } >> } >> >> if (EPIN_EN(audio_opts)) { >> @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >> goto err_free_fu; >> audio->out_ep = ep; >> audio->out_ep->desc = &as_out_ep_desc; >> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >> + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); >> + if (!audio->in_ep_fback) { >> + goto err_free_fu; >> + } >> + } >> } >> >> if (EPIN_EN(audio_opts)) { >> @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) >> >> opts->req_number = UAC1_DEF_REQ_NUM; >> >> + opts->c_sync = UAC1_DEF_CSYNC; >> + >> snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); >> >> return &opts->func_inst; >> diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h >> index f7a616760e31..c6e2271e8cdd 100644 >> --- a/drivers/usb/gadget/function/u_uac1.h >> +++ b/drivers/usb/gadget/function/u_uac1.h >> @@ -27,6 +27,7 @@ >> #define UAC1_DEF_MAX_DB 0 /* 0 dB */ >> #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ >> >> +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC >> >> struct f_uac1_opts { >> struct usb_function_instance func_inst; >> @@ -56,6 +57,7 @@ struct f_uac1_opts { >> >> struct mutex lock; >> int refcnt; >> + int c_sync; >> }; >> >> #endif /* __U_UAC1_H */
Dne 24. 10. 23 v 12:14 be286 napsal(a): > > Hi Pavel, > > Feedback endpoint works for uca1 capture, means "EPOUT_EN". > > Charles Yi > Hi Charles, Sorry for my mistake, I thought you were implementing adaptive mode for EP-IN. IIUC now your patch adds asynchronous mode (not adaptive sync) to UAC1 EP OUT, in the same way as implemented in UAC2. IIUC your patch also changes the UAC1 EP-OUT default mode from adaptive to asynchronous via +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC The current (the only supported) mode is adaptive https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/f_uac1.c#L214: /* Standard ISO OUT Endpoint Descriptor */ static struct usb_endpoint_descriptor as_out_ep_desc = { .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_SYNC_ADAPTIVE | USB_ENDPOINT_XFER_ISOC, .wMaxPacketSize = cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE), .bInterval = 4, }; IMO the patch should keep the adaptive mode as default, to maintain compatibility with user setups. With regards, Pavel. > > > > > > > > At 2023-10-18 17:52:20, "Pavel Hofman" <pavel.hofman@ivitera.com> wrote: >> >> >> Dne 18. 10. 23 v 9:47 Charles Yi napsal(a): >>> UAC1 has it's own freerunning clock and can update Host about >>> real clock frequency through feedback endpoint so Host can align >>> number of samples sent to the UAC1 to prevent overruns/underruns. >>> >>> Change UAC1 driver to make it configurable through additional >>> 'c_sync' configfs file. >>> >>> Default remains 'asynchronous' with possibility to switch it >>> to 'adaptive'. >> >> >> Hi Charles, >> >> Please can you clarify more the adaptive EP IN scenario? I am aware that >> the f_uac2.c also allows defining c_sync type (that's what your patch is >> based on). >> >> IIUC the data production rate of adaptive source endpoint (i.e. EP IN) >> is controlled by feed forward messages from the host >> Quoting http://sdpha2.ucsd.edu/Lab_Equip_Manuals/usb_20.pdf page 73: >> >> "Adaptive source endpoints produce data at a rate that is controlled by >> the data sink. The sink provides feedback (refer to Section 5.12.4.2) to >> the source, which allows the source to know the desired data rate of the >> sink." >> >> While the current f_uac2 implementation generates feedback for EP OUT >> async (unlike f_uac1), I cannot find any support for incoming >> feed-forward messages from the host for EP IN adaptive case. Neither in >> f_uac1, of course. >> >> I am not sure if linux supports IN EP adaptive, but the MS UAC2 driver >> does not >> https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers#audio-streaming: >> >> "For the Adaptive IN case the driver doesn't support a feed forward >> endpoint. If such an endpoint is present in the alternate setting, it >> will be ignored. The driver handles the Adaptive IN stream in the same >> way as an Asynchronous IN stream." >> >> IIUC (and I may be wrong) all the c_sync param does in f_uac2 (and >> f_uac1 in your patch) is just changing the EP IN configuration flag, but >> the actual support for truly adaptive EP IN is not implemented. IMO >> there is no code which would accept the feed-forward message from the >> host and adjust the rate at which samples are consumed from the alsa >> buffer to EP IN packets (method u_audio_iso_complete >> https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/u_audio.c#L193 >> ) >> >> That pertains a bit to the first sentence of your patch - IMO it >> describes EP OUT async, but not EP IN adaptive. >> >> Thanks a lot for a bit of clarification. >> >> Pavel. >> >> >>> >>> Changes in V2: >>> - Updated the indentation of commit message. >>> >>> Signed-off-by: Charles Yi <be286@163.com> >>> --- >>> drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ >>> drivers/usb/gadget/function/u_uac1.h | 2 ++ >>> 2 files changed, 32 insertions(+) >>> >>> diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c >>> index 6f0e1d803dc2..7a6fcb40bb46 100644 >>> --- a/drivers/usb/gadget/function/f_uac1.c >>> +++ b/drivers/usb/gadget/function/f_uac1.c >>> @@ -33,6 +33,8 @@ >>> #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ >>> || (_opts)->c_volume_present) >>> >>> +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) >>> + >>> struct f_uac1 { >>> struct g_audio g_audio; >>> u8 ac_intf, as_in_intf, as_out_intf; >>> @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { >>> .wLockDelay = cpu_to_le16(1), >>> }; >>> >>> +static struct usb_endpoint_descriptor as_fback_ep_desc = { >>> + .bLength = USB_DT_ENDPOINT_SIZE, >>> + .bDescriptorType = USB_DT_ENDPOINT, >>> + >>> + .bEndpointAddress = USB_DIR_IN, >>> + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, >>> + .wMaxPacketSize = cpu_to_le16(3), >>> + .bInterval = 1, >>> +}; >>> + >>> static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { >>> .bLength = 0, /* filled on rate setup */ >>> .bDescriptorType = USB_DT_CS_INTERFACE, >>> @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { >>> >>> (struct usb_descriptor_header *)&as_out_ep_desc, >>> (struct usb_descriptor_header *)&as_iso_out_desc, >>> + (struct usb_descriptor_header *)&as_fback_ep_desc, >>> >>> (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, >>> (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, >>> @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) >>> f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); >>> f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); >>> f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); >>> + if (EPOUT_FBACK_IN_EN(opts)) { >>> + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); >>> + } >>> } >>> if (EPIN_EN(opts)) { >>> f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); >>> @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >>> ac_header_desc->baInterfaceNr[ba_iface_id++] = status; >>> uac1->as_out_intf = status; >>> uac1->as_out_alt = 0; >>> + >>> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >>> + as_out_ep_desc.bmAttributes = >>> + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; >>> + as_out_interface_alt_1_desc.bNumEndpoints++; >>> + } >>> } >>> >>> if (EPIN_EN(audio_opts)) { >>> @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >>> goto err_free_fu; >>> audio->out_ep = ep; >>> audio->out_ep->desc = &as_out_ep_desc; >>> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >>> + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); >>> + if (!audio->in_ep_fback) { >>> + goto err_free_fu; >>> + } >>> + } >>> } >>> >>> if (EPIN_EN(audio_opts)) { >>> @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) >>> >>> opts->req_number = UAC1_DEF_REQ_NUM; >>> >>> + opts->c_sync = UAC1_DEF_CSYNC; >>> + >>> snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); >>> >>> return &opts->func_inst; >>> diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h >>> index f7a616760e31..c6e2271e8cdd 100644 >>> --- a/drivers/usb/gadget/function/u_uac1.h >>> +++ b/drivers/usb/gadget/function/u_uac1.h >>> @@ -27,6 +27,7 @@ >>> #define UAC1_DEF_MAX_DB 0 /* 0 dB */ >>> #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ >>> >>> +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC >>> >>> struct f_uac1_opts { >>> struct usb_function_instance func_inst; >>> @@ -56,6 +57,7 @@ struct f_uac1_opts { >>> >>> struct mutex lock; >>> int refcnt; >>> + int c_sync; >>> }; >>> >>> #endif /* __U_UAC1_H */
Hi Pavel, Keep the adaptive mode as default is better. Thanks. Charles Yi At 2023-10-25 14:44:49, "Pavel Hofman" <pavel.hofman@ivitera.com> wrote: >Dne 24. 10. 23 v 12:14 be286 napsal(a): >> >> Hi Pavel, >> >> Feedback endpoint works for uca1 capture, means "EPOUT_EN". >> >> Charles Yi >> >Hi Charles, > >Sorry for my mistake, I thought you were implementing adaptive mode for >EP-IN. > >IIUC now your patch adds asynchronous mode (not adaptive sync) to UAC1 >EP OUT, in the same way as implemented in UAC2. > >IIUC your patch also changes the UAC1 EP-OUT default mode from adaptive >to asynchronous via > > +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC > >The current (the only supported) mode is adaptive >https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/f_uac1.c#L214: > >/* Standard ISO OUT Endpoint Descriptor */ >static struct usb_endpoint_descriptor as_out_ep_desc = { > .bLength = USB_DT_ENDPOINT_AUDIO_SIZE, > .bDescriptorType = USB_DT_ENDPOINT, > .bEndpointAddress = USB_DIR_OUT, > .bmAttributes = USB_ENDPOINT_SYNC_ADAPTIVE > | USB_ENDPOINT_XFER_ISOC, > .wMaxPacketSize = cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE), > .bInterval = 4, >}; > >IMO the patch should keep the adaptive mode as default, to maintain >compatibility with user setups. > >With regards, > >Pavel. > >> >> >> >> >> >> >> >> At 2023-10-18 17:52:20, "Pavel Hofman" <pavel.hofman@ivitera.com> wrote: >>> >>> >>> Dne 18. 10. 23 v 9:47 Charles Yi napsal(a): >>>> UAC1 has it's own freerunning clock and can update Host about >>>> real clock frequency through feedback endpoint so Host can align >>>> number of samples sent to the UAC1 to prevent overruns/underruns. >>>> >>>> Change UAC1 driver to make it configurable through additional >>>> 'c_sync' configfs file. >>>> >>>> Default remains 'asynchronous' with possibility to switch it >>>> to 'adaptive'. >>> >>> >>> Hi Charles, >>> >>> Please can you clarify more the adaptive EP IN scenario? I am aware that >>> the f_uac2.c also allows defining c_sync type (that's what your patch is >>> based on). >>> >>> IIUC the data production rate of adaptive source endpoint (i.e. EP IN) >>> is controlled by feed forward messages from the host >>> Quoting http://sdpha2.ucsd.edu/Lab_Equip_Manuals/usb_20.pdf page 73: >>> >>> "Adaptive source endpoints produce data at a rate that is controlled by >>> the data sink. The sink provides feedback (refer to Section 5.12.4.2) to >>> the source, which allows the source to know the desired data rate of the >>> sink." >>> >>> While the current f_uac2 implementation generates feedback for EP OUT >>> async (unlike f_uac1), I cannot find any support for incoming >>> feed-forward messages from the host for EP IN adaptive case. Neither in >>> f_uac1, of course. >>> >>> I am not sure if linux supports IN EP adaptive, but the MS UAC2 driver >>> does not >>> https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers#audio-streaming: >>> >>> "For the Adaptive IN case the driver doesn't support a feed forward >>> endpoint. If such an endpoint is present in the alternate setting, it >>> will be ignored. The driver handles the Adaptive IN stream in the same >>> way as an Asynchronous IN stream." >>> >>> IIUC (and I may be wrong) all the c_sync param does in f_uac2 (and >>> f_uac1 in your patch) is just changing the EP IN configuration flag, but >>> the actual support for truly adaptive EP IN is not implemented. IMO >>> there is no code which would accept the feed-forward message from the >>> host and adjust the rate at which samples are consumed from the alsa >>> buffer to EP IN packets (method u_audio_iso_complete >>> https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/u_audio.c#L193 >>> ) >>> >>> That pertains a bit to the first sentence of your patch - IMO it >>> describes EP OUT async, but not EP IN adaptive. >>> >>> Thanks a lot for a bit of clarification. >>> >>> Pavel. >>> >>> >>>> >>>> Changes in V2: >>>> - Updated the indentation of commit message. >>>> >>>> Signed-off-by: Charles Yi <be286@163.com> >>>> --- >>>> drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ >>>> drivers/usb/gadget/function/u_uac1.h | 2 ++ >>>> 2 files changed, 32 insertions(+) >>>> >>>> diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c >>>> index 6f0e1d803dc2..7a6fcb40bb46 100644 >>>> --- a/drivers/usb/gadget/function/f_uac1.c >>>> +++ b/drivers/usb/gadget/function/f_uac1.c >>>> @@ -33,6 +33,8 @@ >>>> #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ >>>> || (_opts)->c_volume_present) >>>> >>>> +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) >>>> + >>>> struct f_uac1 { >>>> struct g_audio g_audio; >>>> u8 ac_intf, as_in_intf, as_out_intf; >>>> @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { >>>> .wLockDelay = cpu_to_le16(1), >>>> }; >>>> >>>> +static struct usb_endpoint_descriptor as_fback_ep_desc = { >>>> + .bLength = USB_DT_ENDPOINT_SIZE, >>>> + .bDescriptorType = USB_DT_ENDPOINT, >>>> + >>>> + .bEndpointAddress = USB_DIR_IN, >>>> + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, >>>> + .wMaxPacketSize = cpu_to_le16(3), >>>> + .bInterval = 1, >>>> +}; >>>> + >>>> static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { >>>> .bLength = 0, /* filled on rate setup */ >>>> .bDescriptorType = USB_DT_CS_INTERFACE, >>>> @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { >>>> >>>> (struct usb_descriptor_header *)&as_out_ep_desc, >>>> (struct usb_descriptor_header *)&as_iso_out_desc, >>>> + (struct usb_descriptor_header *)&as_fback_ep_desc, >>>> >>>> (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, >>>> (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, >>>> @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) >>>> f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); >>>> f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); >>>> f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); >>>> + if (EPOUT_FBACK_IN_EN(opts)) { >>>> + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); >>>> + } >>>> } >>>> if (EPIN_EN(opts)) { >>>> f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); >>>> @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >>>> ac_header_desc->baInterfaceNr[ba_iface_id++] = status; >>>> uac1->as_out_intf = status; >>>> uac1->as_out_alt = 0; >>>> + >>>> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >>>> + as_out_ep_desc.bmAttributes = >>>> + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; >>>> + as_out_interface_alt_1_desc.bNumEndpoints++; >>>> + } >>>> } >>>> >>>> if (EPIN_EN(audio_opts)) { >>>> @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) >>>> goto err_free_fu; >>>> audio->out_ep = ep; >>>> audio->out_ep->desc = &as_out_ep_desc; >>>> + if (EPOUT_FBACK_IN_EN(audio_opts)) { >>>> + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); >>>> + if (!audio->in_ep_fback) { >>>> + goto err_free_fu; >>>> + } >>>> + } >>>> } >>>> >>>> if (EPIN_EN(audio_opts)) { >>>> @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) >>>> >>>> opts->req_number = UAC1_DEF_REQ_NUM; >>>> >>>> + opts->c_sync = UAC1_DEF_CSYNC; >>>> + >>>> snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); >>>> >>>> return &opts->func_inst; >>>> diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h >>>> index f7a616760e31..c6e2271e8cdd 100644 >>>> --- a/drivers/usb/gadget/function/u_uac1.h >>>> +++ b/drivers/usb/gadget/function/u_uac1.h >>>> @@ -27,6 +27,7 @@ >>>> #define UAC1_DEF_MAX_DB 0 /* 0 dB */ >>>> #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ >>>> >>>> +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC >>>> >>>> struct f_uac1_opts { >>>> struct usb_function_instance func_inst; >>>> @@ -56,6 +57,7 @@ struct f_uac1_opts { >>>> >>>> struct mutex lock; >>>> int refcnt; >>>> + int c_sync; >>>> }; >>>> >>>> #endif /* __U_UAC1_H */
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c index 6f0e1d803dc2..7a6fcb40bb46 100644 --- a/drivers/usb/gadget/function/f_uac1.c +++ b/drivers/usb/gadget/function/f_uac1.c @@ -33,6 +33,8 @@ #define FUOUT_EN(_opts) ((_opts)->c_mute_present \ || (_opts)->c_volume_present) +#define EPOUT_FBACK_IN_EN(_opts) ((_opts)->c_sync == USB_ENDPOINT_SYNC_ASYNC) + struct f_uac1 { struct g_audio g_audio; u8 ac_intf, as_in_intf, as_out_intf; @@ -227,6 +229,16 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc = { .wLockDelay = cpu_to_le16(1), }; +static struct usb_endpoint_descriptor as_fback_ep_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_USAGE_FEEDBACK, + .wMaxPacketSize = cpu_to_le16(3), + .bInterval = 1, +}; + static struct uac_format_type_i_discrete_descriptor as_in_type_i_desc = { .bLength = 0, /* filled on rate setup */ .bDescriptorType = USB_DT_CS_INTERFACE, @@ -280,6 +292,7 @@ static struct usb_descriptor_header *f_audio_desc[] = { (struct usb_descriptor_header *)&as_out_ep_desc, (struct usb_descriptor_header *)&as_iso_out_desc, + (struct usb_descriptor_header *)&as_fback_ep_desc, (struct usb_descriptor_header *)&as_in_interface_alt_0_desc, (struct usb_descriptor_header *)&as_in_interface_alt_1_desc, @@ -1107,6 +1120,9 @@ static void setup_descriptor(struct f_uac1_opts *opts) f_audio_desc[i++] = USBDHDR(&as_out_type_i_desc); f_audio_desc[i++] = USBDHDR(&as_out_ep_desc); f_audio_desc[i++] = USBDHDR(&as_iso_out_desc); + if (EPOUT_FBACK_IN_EN(opts)) { + f_audio_desc[i++] = USBDHDR(&as_fback_ep_desc); + } } if (EPIN_EN(opts)) { f_audio_desc[i++] = USBDHDR(&as_in_interface_alt_0_desc); @@ -1317,6 +1333,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) ac_header_desc->baInterfaceNr[ba_iface_id++] = status; uac1->as_out_intf = status; uac1->as_out_alt = 0; + + if (EPOUT_FBACK_IN_EN(audio_opts)) { + as_out_ep_desc.bmAttributes = + USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC; + as_out_interface_alt_1_desc.bNumEndpoints++; + } } if (EPIN_EN(audio_opts)) { @@ -1354,6 +1376,12 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) goto err_free_fu; audio->out_ep = ep; audio->out_ep->desc = &as_out_ep_desc; + if (EPOUT_FBACK_IN_EN(audio_opts)) { + audio->in_ep_fback = usb_ep_autoconfig(gadget, &as_fback_ep_desc); + if (!audio->in_ep_fback) { + goto err_free_fu; + } + } } if (EPIN_EN(audio_opts)) { @@ -1685,6 +1713,8 @@ static struct usb_function_instance *f_audio_alloc_inst(void) opts->req_number = UAC1_DEF_REQ_NUM; + opts->c_sync = UAC1_DEF_CSYNC; + snprintf(opts->function_name, sizeof(opts->function_name), "AC Interface"); return &opts->func_inst; diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h index f7a616760e31..c6e2271e8cdd 100644 --- a/drivers/usb/gadget/function/u_uac1.h +++ b/drivers/usb/gadget/function/u_uac1.h @@ -27,6 +27,7 @@ #define UAC1_DEF_MAX_DB 0 /* 0 dB */ #define UAC1_DEF_RES_DB (1*256) /* 1 dB */ +#define UAC1_DEF_CSYNC USB_ENDPOINT_SYNC_ASYNC struct f_uac1_opts { struct usb_function_instance func_inst; @@ -56,6 +57,7 @@ struct f_uac1_opts { struct mutex lock; int refcnt; + int c_sync; }; #endif /* __U_UAC1_H */
UAC1 has it's own freerunning clock and can update Host about real clock frequency through feedback endpoint so Host can align number of samples sent to the UAC1 to prevent overruns/underruns. Change UAC1 driver to make it configurable through additional 'c_sync' configfs file. Default remains 'asynchronous' with possibility to switch it to 'adaptive'. Changes in V2: - Updated the indentation of commit message. Signed-off-by: Charles Yi <be286@163.com> --- drivers/usb/gadget/function/f_uac1.c | 30 ++++++++++++++++++++++++++++ drivers/usb/gadget/function/u_uac1.h | 2 ++ 2 files changed, 32 insertions(+)