Message ID | 20231017204739.3409052-2-bvanassche@acm.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Pass data temperature information to SCSI disk devices | expand |
On 10/18/2023 2:17 AM, Bart Van Assche wrote: > - * Write life time hint values. > - * Stored in struct inode as u8. > - */ > -enum rw_hint { > - WRITE_LIFE_NOT_SET = 0, > - WRITE_LIFE_NONE = RWH_WRITE_LIFE_NONE, > - WRITE_LIFE_SHORT = RWH_WRITE_LIFE_SHORT, > - WRITE_LIFE_MEDIUM = RWH_WRITE_LIFE_MEDIUM, > - WRITE_LIFE_LONG = RWH_WRITE_LIFE_LONG, > - WRITE_LIFE_EXTREME = RWH_WRITE_LIFE_EXTREME, > -}; > - > /* Match RWF_* bits to IOCB bits */ > #define IOCB_HIPRI (__force int) RWF_HIPRI > #define IOCB_DSYNC (__force int) RWF_DSYNC > @@ -677,7 +665,7 @@ struct inode { > spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ > unsigned short i_bytes; > u8 i_blkbits; > - u8 i_write_hint; > + enum rw_hint i_write_hint; > blkcnt_t i_blocks; > > #ifdef __NEED_I_SIZE_ORDERED > diff --git a/include/linux/rw_hint.h b/include/linux/rw_hint.h > new file mode 100644 > index 000000000000..4a7d28945973 > --- /dev/null > +++ b/include/linux/rw_hint.h > @@ -0,0 +1,20 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#ifndef _LINUX_RW_HINT_H > +#define _LINUX_RW_HINT_H > + > +#include <linux/build_bug.h> > +#include <linux/compiler_attributes.h> > + > +/* Block storage write lifetime hint values. */ > +enum rw_hint { > + WRITE_LIFE_NOT_SET = 0, /* RWH_WRITE_LIFE_NOT_SET */ > + WRITE_LIFE_NONE = 1, /* RWH_WRITE_LIFE_NONE */ > + WRITE_LIFE_SHORT = 2, /* RWH_WRITE_LIFE_SHORT */ > + WRITE_LIFE_MEDIUM = 3, /* RWH_WRITE_LIFE_MEDIUM */ > + WRITE_LIFE_LONG = 4, /* RWH_WRITE_LIFE_LONG */ > + WRITE_LIFE_EXTREME = 5, /* RWH_WRITE_LIFE_EXTREME */ > +} __packed; > + > +static_assert(sizeof(enum rw_hint) == 1); Does it make sense to do away with these, and have temperature-neutral names instead e.g., WRITE_LIFE_1, WRITE_LIFE_2? With the current choice: - If the count goes up (beyond 5 hints), infra can scale fine but these names do not. Imagine ULTRA_EXTREME after EXTREME. - Applications or in-kernel users can specify LONG hint with data that actually has a SHORT lifetime. Nothing really ensures that LONG is really LONG. Temperature-neutral names seem more generic/scalable and do not present the unnecessary need to be accurate with relative temperatures.
On 10/30/23 04:11, Kanchan Joshi wrote: > On 10/18/2023 2:17 AM, Bart Van Assche wrote: >> +/* Block storage write lifetime hint values. */ >> +enum rw_hint { >> + WRITE_LIFE_NOT_SET = 0, /* RWH_WRITE_LIFE_NOT_SET */ >> + WRITE_LIFE_NONE = 1, /* RWH_WRITE_LIFE_NONE */ >> + WRITE_LIFE_SHORT = 2, /* RWH_WRITE_LIFE_SHORT */ >> + WRITE_LIFE_MEDIUM = 3, /* RWH_WRITE_LIFE_MEDIUM */ >> + WRITE_LIFE_LONG = 4, /* RWH_WRITE_LIFE_LONG */ >> + WRITE_LIFE_EXTREME = 5, /* RWH_WRITE_LIFE_EXTREME */ >> +} __packed; >> + >> +static_assert(sizeof(enum rw_hint) == 1); > > Does it make sense to do away with these, and have temperature-neutral > names instead e.g., WRITE_LIFE_1, WRITE_LIFE_2? > > With the current choice: > - If the count goes up (beyond 5 hints), infra can scale fine but these > names do not. Imagine ULTRA_EXTREME after EXTREME. > - Applications or in-kernel users can specify LONG hint with data that > actually has a SHORT lifetime. Nothing really ensures that LONG is > really LONG. > > Temperature-neutral names seem more generic/scalable and do not present > the unnecessary need to be accurate with relative temperatures. Thanks for having taken a look at this patch series. Jens asked for data that shows that this patch series improves performance. Is this something Samsung can help with? Thanks, Bart.
Hi Bart, >On 10/30/23 04:11, Kanchan Joshi wrote: >> On 10/18/2023 2:17 AM, Bart Van Assche wrote: >>> +/* Block storage write lifetime hint values. */ >>> +enum rw_hint { >>> + WRITE_LIFE_NOT_SET = 0, /* RWH_WRITE_LIFE_NOT_SET */ >>> + WRITE_LIFE_NONE = 1, /* RWH_WRITE_LIFE_NONE */ >>> + WRITE_LIFE_SHORT = 2, /* RWH_WRITE_LIFE_SHORT */ >>> + WRITE_LIFE_MEDIUM = 3, /* RWH_WRITE_LIFE_MEDIUM */ >>> + WRITE_LIFE_LONG = 4, /* RWH_WRITE_LIFE_LONG */ >>> + WRITE_LIFE_EXTREME = 5, /* RWH_WRITE_LIFE_EXTREME */ >>> +} __packed; >>> + >>> +static_assert(sizeof(enum rw_hint) == 1); >> >> Does it make sense to do away with these, and have temperature-neutral >> names instead e.g., WRITE_LIFE_1, WRITE_LIFE_2? >> >> With the current choice: >> - If the count goes up (beyond 5 hints), infra can scale fine but these >> names do not. Imagine ULTRA_EXTREME after EXTREME. >> - Applications or in-kernel users can specify LONG hint with data that >> actually has a SHORT lifetime. Nothing really ensures that LONG is >> really LONG. >> >> Temperature-neutral names seem more generic/scalable and do not present >> the unnecessary need to be accurate with relative temperatures. > >Thanks for having taken a look at this patch series. Jens asked for data >that shows that this patch series improves performance. Is this >something Samsung can help with? We analyzed the NAND block erase counter with and without stream separation through a long-term workload in F2FS. The analysis showed that the erase counter is reduced by approximately 40% with stream seperation. Long-term workload is a scenario where erase and write are repeated by stream after performing precondition fill for each temperature of F2FS. Thanks, Daejun. > >Thanks, > >Bart. > > >
On 10/31/23 23:39, Daejun Park wrote: >> On 10/30/23 04:11, Kanchan Joshi wrote: >>> On 10/18/2023 2:17 AM, Bart Van Assche wrote: >> Thanks for having taken a look at this patch series. Jens asked for data >> that shows that this patch series improves performance. Is this >> something Samsung can help with? > > We analyzed the NAND block erase counter with and without stream separation > through a long-term workload in F2FS. > The analysis showed that the erase counter is reduced by approximately 40% > with stream seperation. > Long-term workload is a scenario where erase and write are repeated by > stream after performing precondition fill for each temperature of F2FS. Hi Daejun, Thank you for having shared this data. This is very helpful. Since I'm not familiar with the erase counter: does the above data perhaps mean that write amplification is reduced by 40% in the workload that has been examined? Thanks, Bart.
Hi Bart, >On 10/31/23 23:39, Daejun Park wrote: >>> On 10/30/23 04:11, Kanchan Joshi wrote: >>>> On 10/18/2023 2:17 AM, Bart Van Assche wrote: >>> Thanks for having taken a look at this patch series. Jens asked for data >>> that shows that this patch series improves performance. Is this >>> something Samsung can help with? >> >> We analyzed the NAND block erase counter with and without stream separation >> through a long-term workload in F2FS. >> The analysis showed that the erase counter is reduced by approximately 40% >> with stream seperation. >> Long-term workload is a scenario where erase and write are repeated by >> stream after performing precondition fill for each temperature of F2FS. > >Hi Daejun, > >Thank you for having shared this data. This is very helpful. Since I'm >not familiar with the erase counter: does the above data perhaps mean >that write amplification is reduced by 40% in the workload that has been >examined? WAF is not only caused by GC. It is also caused by other reasons. During device GC, the valid pages in the victim block are migrated, and a lower erase counter means that the effective GC is performed by selecting a victim block with a small number of invalid pages. Thus, it can be said that the WAF can be decreased about 40% by selecting fewer victim blocks during device GC. Thanks, Daejun > >Thanks, > >Bart.
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h index 6d688e42d89c..56ee7fff55c7 100644 --- a/fs/f2fs/f2fs.h +++ b/fs/f2fs/f2fs.h @@ -24,6 +24,7 @@ #include <linux/blkdev.h> #include <linux/quotaops.h> #include <linux/part_stat.h> +#include <linux/rw_hint.h> #include <crypto/hash.h> #include <linux/fscrypt.h> diff --git a/fs/fcntl.c b/fs/fcntl.c index e871009f6c88..ed923640aecf 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -27,6 +27,7 @@ #include <linux/memfd.h> #include <linux/compat.h> #include <linux/mount.h> +#include <linux/rw_hint.h> #include <linux/poll.h> #include <asm/siginfo.h> diff --git a/fs/inode.c b/fs/inode.c index 84bc3c76e5cc..ebcc41ac9682 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -20,6 +20,7 @@ #include <linux/ratelimit.h> #include <linux/list_lru.h> #include <linux/iversion.h> +#include <linux/rw_hint.h> #include <trace/events/writeback.h> #include "internal.h" diff --git a/include/linux/fs.h b/include/linux/fs.h index b528f063e8ff..971f0bafa782 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -43,6 +43,7 @@ #include <linux/cred.h> #include <linux/mnt_idmapping.h> #include <linux/slab.h> +#include <linux/rw_hint.h> #include <asm/byteorder.h> #include <uapi/linux/fs.h> @@ -309,19 +310,6 @@ struct address_space; struct writeback_control; struct readahead_control; -/* - * Write life time hint values. - * Stored in struct inode as u8. - */ -enum rw_hint { - WRITE_LIFE_NOT_SET = 0, - WRITE_LIFE_NONE = RWH_WRITE_LIFE_NONE, - WRITE_LIFE_SHORT = RWH_WRITE_LIFE_SHORT, - WRITE_LIFE_MEDIUM = RWH_WRITE_LIFE_MEDIUM, - WRITE_LIFE_LONG = RWH_WRITE_LIFE_LONG, - WRITE_LIFE_EXTREME = RWH_WRITE_LIFE_EXTREME, -}; - /* Match RWF_* bits to IOCB bits */ #define IOCB_HIPRI (__force int) RWF_HIPRI #define IOCB_DSYNC (__force int) RWF_DSYNC @@ -677,7 +665,7 @@ struct inode { spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */ unsigned short i_bytes; u8 i_blkbits; - u8 i_write_hint; + enum rw_hint i_write_hint; blkcnt_t i_blocks; #ifdef __NEED_I_SIZE_ORDERED diff --git a/include/linux/rw_hint.h b/include/linux/rw_hint.h new file mode 100644 index 000000000000..4a7d28945973 --- /dev/null +++ b/include/linux/rw_hint.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_RW_HINT_H +#define _LINUX_RW_HINT_H + +#include <linux/build_bug.h> +#include <linux/compiler_attributes.h> + +/* Block storage write lifetime hint values. */ +enum rw_hint { + WRITE_LIFE_NOT_SET = 0, /* RWH_WRITE_LIFE_NOT_SET */ + WRITE_LIFE_NONE = 1, /* RWH_WRITE_LIFE_NONE */ + WRITE_LIFE_SHORT = 2, /* RWH_WRITE_LIFE_SHORT */ + WRITE_LIFE_MEDIUM = 3, /* RWH_WRITE_LIFE_MEDIUM */ + WRITE_LIFE_LONG = 4, /* RWH_WRITE_LIFE_LONG */ + WRITE_LIFE_EXTREME = 5, /* RWH_WRITE_LIFE_EXTREME */ +} __packed; + +static_assert(sizeof(enum rw_hint) == 1); + +#endif /* _LINUX_RW_HINT_H */
Move enum rw_hint into a new header file to prepare for using this data type in the block layer. Add the attribute __packed to reduce the space occupied by instances of this data type from four bytes to one byte. Change the data type of i_write_hint from u8 into enum rw_hint. Change the RWH_* constants into literal constants to prevent that <uapi/linux/fcntl.h> would have to be included. Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> --- fs/f2fs/f2fs.h | 1 + fs/fcntl.c | 1 + fs/inode.c | 1 + include/linux/fs.h | 16 ++-------------- include/linux/rw_hint.h | 20 ++++++++++++++++++++ 5 files changed, 25 insertions(+), 14 deletions(-) create mode 100644 include/linux/rw_hint.h