diff mbox series

[v2,1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params

Message ID 1699332374-9324-2-git-send-email-cang@qti.qualcomm.com (mailing list archive)
State New
Headers show
Series [v2,1/7] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params | expand

Commit Message

Can Guo Nov. 7, 2023, 4:46 a.m. UTC 
From: Can Guo <quic_cang@quicinc.com>

Structure ufs_dev_params is actually used in UFS host vendor drivers to
declare host specific power mode parameters, like ufs_<vendor>_params or
host_cap, which makes the code not very straightforward to read. Rename the
structure ufs_dev_params to ufs_host_params and unify the declarations in
all vendor drivers to host_params.

In addition, rename the two functions ufshcd_init_dev_pwr_param() and
ufshcd_get_dev_pwr_param() which work based on the ufs_host_params to
ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to
avoid confusions.

This change does not change any functionalities or logic.

Signed-off-by: Can Guo <quic_cang@quicinc.com>
---
 drivers/ufs/host/ufs-exynos.c    |  7 +++---
 drivers/ufs/host/ufs-hisi.c      | 11 ++++-----
 drivers/ufs/host/ufs-mediatek.c  | 12 ++++------
 drivers/ufs/host/ufs-qcom.c      | 12 ++++------
 drivers/ufs/host/ufshcd-pltfrm.c | 49 ++++++++++++++++++++--------------------
 drivers/ufs/host/ufshcd-pltfrm.h | 10 ++++----
 6 files changed, 47 insertions(+), 54 deletions(-)

Comments

Andrew Halaney Nov. 7, 2023, 7:36 p.m. UTC | #1 
On Mon, Nov 06, 2023 at 08:46:07PM -0800, Can Guo wrote:
> From: Can Guo <quic_cang@quicinc.com>
> 
> Structure ufs_dev_params is actually used in UFS host vendor drivers to
> declare host specific power mode parameters, like ufs_<vendor>_params or
> host_cap, which makes the code not very straightforward to read. Rename the
> structure ufs_dev_params to ufs_host_params and unify the declarations in
> all vendor drivers to host_params.
> 
> In addition, rename the two functions ufshcd_init_dev_pwr_param() and

nit: s/ufshcd_init_dev_pwr_param/ufshcd_init_pwr_dev_param/

> ufshcd_get_dev_pwr_param() which work based on the ufs_host_params to

nit: s/ufshcd_get_dev_pwr_param/ufshcd_get_pwr_dev_param/

> ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to
> avoid confusions.
> 
> This change does not change any functionalities or logic.
> 
> Signed-off-by: Can Guo <quic_cang@quicinc.com>
> ---
>  drivers/ufs/host/ufs-exynos.c    |  7 +++---
>  drivers/ufs/host/ufs-hisi.c      | 11 ++++-----
>  drivers/ufs/host/ufs-mediatek.c  | 12 ++++------
>  drivers/ufs/host/ufs-qcom.c      | 12 ++++------
>  drivers/ufs/host/ufshcd-pltfrm.c | 49 ++++++++++++++++++++--------------------
>  drivers/ufs/host/ufshcd-pltfrm.h | 10 ++++----
>  6 files changed, 47 insertions(+), 54 deletions(-)
> 

<snip>

> diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
> index da2558e..6e65b61 100644
> --- a/drivers/ufs/host/ufshcd-pltfrm.c
> +++ b/drivers/ufs/host/ufshcd-pltfrm.c
> @@ -285,17 +285,17 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba)
>  }
>  
>  /**
> - * ufshcd_get_pwr_dev_param - get finally agreed attributes for
> + * ufshcd_negotiate_pwr_param - get finally agreed attributes for
>   *                            power mode change
> - * @pltfrm_param: pointer to platform parameters
> + * @host_param: pointer to platform parameters
>   * @dev_max: pointer to device attributes
>   * @agreed_pwr: returned agreed attributes
>   *
>   * Return: 0 on success, non-zero value on failure.
>   */
> -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
> -			     const struct ufs_pa_layer_attr *dev_max,
> -			     struct ufs_pa_layer_attr *agreed_pwr)
> +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param,
> +			       const struct ufs_pa_layer_attr *dev_max,
> +			       struct ufs_pa_layer_attr *agreed_pwr)
>  {
>  	int min_pltfrm_gear;

If you're going to change pltfrm -> host, maybe do so for
min_pltfrm_gear too? I think this all reads nicer with the functions
changed as is, but the consistency would be nice in my opinion.

Outside of those nits, I think this reads nicer now as well.

Acked-by: Andrew Halaney <ahalaney@redhat.com>
Bart Van Assche Nov. 7, 2023, 8:56 p.m. UTC | #2 
On 11/6/23 20:46, Can Guo wrote:
>   /**
> - * ufshcd_get_pwr_dev_param - get finally agreed attributes for
> + * ufshcd_negotiate_pwr_param - get finally agreed attributes for
>    *                            power mode change

Since you are renaming the function, please also change the description
of the function into something more meaningful, e.g. "find power mode
settings that are supported by both the controller and the device".

> - * @pltfrm_param: pointer to platform parameters
> + * @host_param: pointer to platform parameters

Please make sure that the argument name and argument description are in
sync.

Thanks,

Bart.
Can Guo Nov. 8, 2023, 7:44 a.m. UTC | #3 
Hi Andrew,

On 11/8/2023 3:36 AM, Andrew Halaney wrote:
> On Mon, Nov 06, 2023 at 08:46:07PM -0800, Can Guo wrote:
>> From: Can Guo <quic_cang@quicinc.com>
>>
>> Structure ufs_dev_params is actually used in UFS host vendor drivers to
>> declare host specific power mode parameters, like ufs_<vendor>_params or
>> host_cap, which makes the code not very straightforward to read. Rename the
>> structure ufs_dev_params to ufs_host_params and unify the declarations in
>> all vendor drivers to host_params.
>>
>> In addition, rename the two functions ufshcd_init_dev_pwr_param() and
> nit: s/ufshcd_init_dev_pwr_param/ufshcd_init_pwr_dev_param/
sure
>
>> ufshcd_get_dev_pwr_param() which work based on the ufs_host_params to
> nit: s/ufshcd_get_dev_pwr_param/ufshcd_get_pwr_dev_param/
sure
>
>> ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to
>> avoid confusions.
>>
>> This change does not change any functionalities or logic.
>>
>> Signed-off-by: Can Guo <quic_cang@quicinc.com>
>> ---
>>   drivers/ufs/host/ufs-exynos.c    |  7 +++---
>>   drivers/ufs/host/ufs-hisi.c      | 11 ++++-----
>>   drivers/ufs/host/ufs-mediatek.c  | 12 ++++------
>>   drivers/ufs/host/ufs-qcom.c      | 12 ++++------
>>   drivers/ufs/host/ufshcd-pltfrm.c | 49 ++++++++++++++++++++--------------------
>>   drivers/ufs/host/ufshcd-pltfrm.h | 10 ++++----
>>   6 files changed, 47 insertions(+), 54 deletions(-)
>>
> <snip>
>
>> diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
>> index da2558e..6e65b61 100644
>> --- a/drivers/ufs/host/ufshcd-pltfrm.c
>> +++ b/drivers/ufs/host/ufshcd-pltfrm.c
>> @@ -285,17 +285,17 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba)
>>   }
>>   
>>   /**
>> - * ufshcd_get_pwr_dev_param - get finally agreed attributes for
>> + * ufshcd_negotiate_pwr_param - get finally agreed attributes for
>>    *                            power mode change
>> - * @pltfrm_param: pointer to platform parameters
>> + * @host_param: pointer to platform parameters
>>    * @dev_max: pointer to device attributes
>>    * @agreed_pwr: returned agreed attributes
>>    *
>>    * Return: 0 on success, non-zero value on failure.
>>    */
>> -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
>> -			     const struct ufs_pa_layer_attr *dev_max,
>> -			     struct ufs_pa_layer_attr *agreed_pwr)
>> +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param,
>> +			       const struct ufs_pa_layer_attr *dev_max,
>> +			       struct ufs_pa_layer_attr *agreed_pwr)
>>   {
>>   	int min_pltfrm_gear;
> If you're going to change pltfrm -> host, maybe do so for
> min_pltfrm_gear too? I think this all reads nicer with the functions
> changed as is, but the consistency would be nice in my opinion.

Sure, will address in next version.

>
> Outside of those nits, I think this reads nicer now as well.
>
> Acked-by: Andrew Halaney <ahalaney@redhat.com>


Thanks,

Can Guo
Can Guo Nov. 8, 2023, 7:48 a.m. UTC | #4 
Hi Bart,

On 11/8/2023 4:56 AM, Bart Van Assche wrote:
> On 11/6/23 20:46, Can Guo wrote:
>>   /**
>> - * ufshcd_get_pwr_dev_param - get finally agreed attributes for
>> + * ufshcd_negotiate_pwr_param - get finally agreed attributes for
>>    *                            power mode change
>
> Since you are renaming the function, please also change the description
> of the function into something more meaningful, e.g. "find power mode
> settings that are supported by both the controller and the device".
Sure, will do.
>
>> - * @pltfrm_param: pointer to platform parameters
>> + * @host_param: pointer to platform parameters
>
> Please make sure that the argument name and argument description are in
> sync.
Sure.
>
> Thanks,
>
> Bart.


Thanks,

Can Guo.
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 71bd6db..674f2f4 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -765,7 +765,7 @@  static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
 {
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 	struct phy *generic_phy = ufs->phy;
-	struct ufs_dev_params ufs_exynos_cap;
+	struct ufs_host_params host_params;
 	int ret;
 
 	if (!dev_req_params) {
@@ -774,10 +774,9 @@  static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
 		goto out;
 	}
 
-	ufshcd_init_pwr_dev_param(&ufs_exynos_cap);
+	ufshcd_init_host_param(&host_params);
 
-	ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap,
-				       dev_max_params, dev_req_params);
+	ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params);
 	if (ret) {
 		pr_err("%s: failed to determine capabilities\n", __func__);
 		goto out;
diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c
index 0229ac0..bb0c9a7 100644
--- a/drivers/ufs/host/ufs-hisi.c
+++ b/drivers/ufs/host/ufs-hisi.c
@@ -293,9 +293,9 @@  static int ufs_hisi_link_startup_notify(struct ufs_hba *hba,
 	return err;
 }
 
-static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param)
+static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params)
 {
-	ufshcd_init_pwr_dev_param(hisi_param);
+	ufshcd_init_host_param(host_params);
 }
 
 static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
@@ -365,7 +365,7 @@  static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba,
 				       struct ufs_pa_layer_attr *dev_max_params,
 				       struct ufs_pa_layer_attr *dev_req_params)
 {
-	struct ufs_dev_params ufs_hisi_cap;
+	struct ufs_host_params host_params;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -377,9 +377,8 @@  static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba,
 
 	switch (status) {
 	case PRE_CHANGE:
-		ufs_hisi_set_dev_cap(&ufs_hisi_cap);
-		ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap,
-					       dev_max_params, dev_req_params);
+		ufs_hisi_set_dev_cap(&host_params);
+		ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params);
 		if (ret) {
 			dev_err(hba->dev,
 			    "%s: failed to determine capabilities\n", __func__);
diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index fc61790..016067d 100644
--- a/drivers/ufs/host/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -996,16 +996,14 @@  static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba,
 				  struct ufs_pa_layer_attr *dev_req_params)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
-	struct ufs_dev_params host_cap;
+	struct ufs_host_params host_params;
 	int ret;
 
-	ufshcd_init_pwr_dev_param(&host_cap);
-	host_cap.hs_rx_gear = UFS_HS_G5;
-	host_cap.hs_tx_gear = UFS_HS_G5;
+	ufshcd_init_host_param(&host_params);
+	host_params.hs_rx_gear = UFS_HS_G5;
+	host_params.hs_tx_gear = UFS_HS_G5;
 
-	ret = ufshcd_get_pwr_dev_param(&host_cap,
-				       dev_max_params,
-				       dev_req_params);
+	ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params);
 	if (ret) {
 		pr_info("%s: failed to determine capabilities\n",
 			__func__);
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 96cb8b5..aee66a3 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -898,7 +898,7 @@  static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 				struct ufs_pa_layer_attr *dev_req_params)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct ufs_dev_params ufs_qcom_cap;
+	struct ufs_host_params host_params;
 	int ret = 0;
 
 	if (!dev_req_params) {
@@ -908,15 +908,13 @@  static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 
 	switch (status) {
 	case PRE_CHANGE:
-		ufshcd_init_pwr_dev_param(&ufs_qcom_cap);
-		ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+		ufshcd_init_host_param(&host_params);
+		host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
 
 		/* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */
-		ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba);
+		host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba);
 
-		ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap,
-					       dev_max_params,
-					       dev_req_params);
+		ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params);
 		if (ret) {
 			dev_err(hba->dev, "%s: failed to determine capabilities\n",
 					__func__);
diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
index da2558e..6e65b61 100644
--- a/drivers/ufs/host/ufshcd-pltfrm.c
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -285,17 +285,17 @@  static int ufshcd_parse_operating_points(struct ufs_hba *hba)
 }
 
 /**
- * ufshcd_get_pwr_dev_param - get finally agreed attributes for
+ * ufshcd_negotiate_pwr_param - get finally agreed attributes for
  *                            power mode change
- * @pltfrm_param: pointer to platform parameters
+ * @host_param: pointer to platform parameters
  * @dev_max: pointer to device attributes
  * @agreed_pwr: returned agreed attributes
  *
  * Return: 0 on success, non-zero value on failure.
  */
-int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
-			     const struct ufs_pa_layer_attr *dev_max,
-			     struct ufs_pa_layer_attr *agreed_pwr)
+int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param,
+			       const struct ufs_pa_layer_attr *dev_max,
+			       struct ufs_pa_layer_attr *agreed_pwr)
 {
 	int min_pltfrm_gear;
 	int min_dev_gear;
@@ -305,19 +305,18 @@  int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
 	if (dev_max->pwr_rx == FAST_MODE)
 		is_dev_sup_hs = true;
 
-	if (pltfrm_param->desired_working_mode == UFS_HS_MODE) {
+	if (host_param->desired_working_mode == UFS_HS_MODE) {
 		is_pltfrm_max_hs = true;
-		min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear,
-					pltfrm_param->hs_tx_gear);
+		min_pltfrm_gear = min_t(u32, host_param->hs_rx_gear,
+					host_param->hs_tx_gear);
 	} else {
-		min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear,
-					pltfrm_param->pwm_tx_gear);
+		min_pltfrm_gear = min_t(u32, host_param->pwm_rx_gear,
+					host_param->pwm_tx_gear);
 	}
 
 	/*
-	 * device doesn't support HS but
-	 * pltfrm_param->desired_working_mode is HS,
-	 * thus device and pltfrm_param don't agree
+	 * device doesn't support HS but host_param->desired_working_mode is HS,
+	 * thus device and host_param don't agree
 	 */
 	if (!is_dev_sup_hs && is_pltfrm_max_hs) {
 		pr_info("%s: device doesn't support HS\n",
@@ -326,20 +325,20 @@  int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
 	} else if (is_dev_sup_hs && is_pltfrm_max_hs) {
 		/*
 		 * since device supports HS, it supports FAST_MODE.
-		 * since pltfrm_param->desired_working_mode is also HS
+		 * since host_param->desired_working_mode is also HS
 		 * then final decision (FAST/FASTAUTO) is done according
 		 * to pltfrm_params as it is the restricting factor
 		 */
-		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs;
+		agreed_pwr->pwr_rx = host_param->rx_pwr_hs;
 		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
 	} else {
 		/*
-		 * here pltfrm_param->desired_working_mode is PWM.
+		 * here host_param->desired_working_mode is PWM.
 		 * it doesn't matter whether device supports HS or PWM,
-		 * in both cases pltfrm_param->desired_working_mode will
+		 * in both cases host_param->desired_working_mode will
 		 * determine the mode
 		 */
-		agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm;
+		agreed_pwr->pwr_rx = host_param->rx_pwr_pwm;
 		agreed_pwr->pwr_tx = agreed_pwr->pwr_rx;
 	}
 
@@ -349,9 +348,9 @@  int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
 	 * the same decision will be made for rx
 	 */
 	agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx,
-				    pltfrm_param->tx_lanes);
+				    host_param->tx_lanes);
 	agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx,
-				    pltfrm_param->rx_lanes);
+				    host_param->rx_lanes);
 
 	/* device maximum gear is the minimum between device rx and tx gears */
 	min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
@@ -375,15 +374,15 @@  int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param,
 	}
 	agreed_pwr->gear_tx = agreed_pwr->gear_rx;
 
-	agreed_pwr->hs_rate = pltfrm_param->hs_rate;
+	agreed_pwr->hs_rate = host_param->hs_rate;
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param);
+EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_param);
 
-void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param)
+void ufshcd_init_host_param(struct ufs_host_params *host_param)
 {
-	*dev_param = (struct ufs_dev_params){
+	*host_param = (struct ufs_host_params){
 		.tx_lanes = UFS_LANE_2,
 		.rx_lanes = UFS_LANE_2,
 		.hs_rx_gear = UFS_HS_G3,
@@ -398,7 +397,7 @@  void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param)
 		.desired_working_mode = UFS_HS_MODE,
 	};
 }
-EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param);
+EXPORT_SYMBOL_GPL(ufshcd_init_host_param);
 
 /**
  * ufshcd_pltfrm_init - probe routine of the driver
diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h
index a86a3ad..2d4d047 100644
--- a/drivers/ufs/host/ufshcd-pltfrm.h
+++ b/drivers/ufs/host/ufshcd-pltfrm.h
@@ -10,7 +10,7 @@ 
 #define UFS_PWM_MODE 1
 #define UFS_HS_MODE  2
 
-struct ufs_dev_params {
+struct ufs_host_params {
 	u32 pwm_rx_gear;        /* pwm rx gear to work in */
 	u32 pwm_tx_gear;        /* pwm tx gear to work in */
 	u32 hs_rx_gear;         /* hs rx gear to work in */
@@ -25,10 +25,10 @@  struct ufs_dev_params {
 	u32 desired_working_mode;
 };
 
-int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param,
-			     const struct ufs_pa_layer_attr *dev_max,
-			     struct ufs_pa_layer_attr *agreed_pwr);
-void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param);
+int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param,
+			       const struct ufs_pa_layer_attr *dev_max,
+			       struct ufs_pa_layer_attr *agreed_pwr);
+void ufshcd_init_host_param(struct ufs_host_params *host_param);
 int ufshcd_pltfrm_init(struct platform_device *pdev,
 		       const struct ufs_hba_variant_ops *vops);
 int ufshcd_populate_vreg(struct device *dev, const char *name,