| Message ID | 20231031163104.112469-9-benjamin.gaignard@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add DELETE_BUF ioctl | expand |
On Tue, Oct 31, 2023 at 05:30:16PM +0100, Benjamin Gaignard wrote: > Stop using queue num_buffers field directly, instead use > vb2_get_num_buffers(). > This prepares for the future 'delete buffers' feature where there are > holes in the buffer indices. > > Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > --- > .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++-------- > .../media/common/videobuf2/videobuf2-v4l2.c | 4 +- > 2 files changed, 54 insertions(+), 42 deletions(-) > > diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c > index b406a30a9b35..c5c5ae4d213d 100644 > --- a/drivers/media/common/videobuf2/videobuf2-core.c > +++ b/drivers/media/common/videobuf2/videobuf2-core.c > @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, > unsigned int num_buffers, unsigned int num_planes, > const unsigned plane_sizes[VB2_MAX_PLANES]) > { > + unsigned int q_num_buffers = vb2_get_num_buffers(q); > unsigned int buffer, plane; > struct vb2_buffer *vb; > int ret; > > /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ > num_buffers = min_t(unsigned int, num_buffers, > - VB2_MAX_FRAME - q->num_buffers); > + VB2_MAX_FRAME - q_num_buffers); I guess it's safe in this specific situation, but was there any reason behind not just calling vb2_get_num_buffers() directly here? > > for (buffer = 0; buffer < num_buffers; ++buffer) { > /* Allocate vb2 buffer structures */ > @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, > vb->planes[plane].min_length = plane_sizes[plane]; > } > > - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer); > + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer); In this case it should also be fine, but actually now this is a loop and if somone doesn't know what the other code in the loop does, one could be concerned that the num buffers actually could have changed, but we still use the cached one that we got at the beginning of the function. (Ideally I'd imagine vb2_queue_add_buffer() to append the buffer at the end of the queue and increment the num_buffers internally, but it doesn't have to happen now, as this series is already quite complex...) > call_void_bufop(q, init_buffer, vb); > > /* Allocate video buffer memory for the MMAP type */ [snip] > @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q) > __vb2_cleanup_fileio(q); > __vb2_queue_cancel(q); > mutex_lock(&q->mmap_lock); > - __vb2_queue_free(q, q->num_buffers); > + __vb2_queue_free(q, vb2_get_num_buffers(q)); > + q->num_buffers = 0; Unrelated change? > mutex_unlock(&q->mmap_lock); > } > EXPORT_SYMBOL_GPL(vb2_core_queue_release); > @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, > /* > * Start file I/O emulator only if streaming API has not been used yet. > */ > - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) { > + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) { > if (!q->is_output && (q->io_modes & VB2_READ) && > (req_events & (EPOLLIN | EPOLLRDNORM))) { > if (__vb2_init_fileio(q, 1)) > @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, > * For output streams you can call write() as long as there are fewer > * buffers queued than there are buffers available. > */ > - if (q->is_output && q->fileio && q->queued_count < q->num_buffers) > + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q)) > return EPOLLOUT | EPOLLWRNORM; > > if (list_empty(&q->done_list)) { > @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf { > * struct vb2_fileio_data - queue context used by file io emulator > * > * @cur_index: the index of the buffer currently being read from or > - * written to. If equal to q->num_buffers then a new buffer > - * must be dequeued. > + * written to. If equal to number of already queued buffers > + * then a new buffer must be dequeued. Hmm, that's a significant meaning change compared to the original text. Is it indended? > * @initial_index: in the read() case all buffers are queued up immediately > * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles > * buffers. However, in the write() case no buffers are initially > @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf { > * buffers. This means that initially __vb2_perform_fileio() > * needs to know what buffer index to use when it is queuing up > * the buffers for the first time. That initial index is stored > - * in this field. Once it is equal to q->num_buffers all > + * in this field. Once it is equal to num_buffers all It's not clear what num_buffers means here. Would it make sense to instead say "number of buffers in the vb2_queue"? > * available buffers have been queued and __vb2_perform_fileio() > * should start the normal dequeue/queue cycle. > * > @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > /* > * Check if streaming api has not been already activated. > */ > - if (q->streaming || q->num_buffers > 0) > + if (q->streaming || vb2_get_num_buffers(q) > 0) > return -EBUSY; > > /* > @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > /* > * Get kernel address of each buffer. > */ > - for (i = 0; i < q->num_buffers; i++) { > + for (i = 0; i < vb2_get_num_buffers(q); i++) { > /* vb can never be NULL when using fileio. */ > vb = vb2_get_buffer(q, i); > > @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > /* > * Queue all buffers. > */ > - for (i = 0; i < q->num_buffers; i++) { > - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL); > + for (i = 0; i < vb2_get_num_buffers(q); i++) { > + struct vb2_buffer *vb2 = vb2_get_buffer(q, i); > + > + if (!vb2) > + continue; > + > + ret = vb2_core_qbuf(q, vb2, NULL, NULL); > if (ret) > goto err_reqbufs; > fileio->bufs[i].queued = 1; > } Doesn't this part belong to the previous patch that changes q->bufs[x] to vb2_get_buffer()? > /* > * All buffers have been queued, so mark that by setting > - * initial_index to q->num_buffers > + * initial_index to num_buffers What num_buffers? > */ > - fileio->initial_index = q->num_buffers; > - fileio->cur_index = q->num_buffers; > + fileio->initial_index = vb2_get_num_buffers(q); > + fileio->cur_index = fileio->initial_index; > } > > /* > @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_ > * If we are queuing up buffers for the first time, then > * increase initial_index by one. > */ > - if (fileio->initial_index < q->num_buffers) > + if (fileio->initial_index < vb2_get_num_buffers(q)) > fileio->initial_index++; > /* > * The next buffer to use is either a buffer that's going to be > - * queued for the first time (initial_index < q->num_buffers) > - * or it is equal to q->num_buffers, meaning that the next > + * queued for the first time (initial_index < num_buffers) > + * or it is equal to num_buffers, meaning that the next What num_buffers? Best regards, Tomasz
Le 08/11/2023 à 10:42, Tomasz Figa a écrit : > On Tue, Oct 31, 2023 at 05:30:16PM +0100, Benjamin Gaignard wrote: >> Stop using queue num_buffers field directly, instead use >> vb2_get_num_buffers(). >> This prepares for the future 'delete buffers' feature where there are >> holes in the buffer indices. >> >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> >> --- >> .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++-------- >> .../media/common/videobuf2/videobuf2-v4l2.c | 4 +- >> 2 files changed, 54 insertions(+), 42 deletions(-) >> >> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c >> index b406a30a9b35..c5c5ae4d213d 100644 >> --- a/drivers/media/common/videobuf2/videobuf2-core.c >> +++ b/drivers/media/common/videobuf2/videobuf2-core.c >> @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, >> unsigned int num_buffers, unsigned int num_planes, >> const unsigned plane_sizes[VB2_MAX_PLANES]) >> { >> + unsigned int q_num_buffers = vb2_get_num_buffers(q); >> unsigned int buffer, plane; >> struct vb2_buffer *vb; >> int ret; >> >> /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ >> num_buffers = min_t(unsigned int, num_buffers, >> - VB2_MAX_FRAME - q->num_buffers); >> + VB2_MAX_FRAME - q_num_buffers); > I guess it's safe in this specific situation, but was there any reason > behind not just calling vb2_get_num_buffers() directly here? > >> >> for (buffer = 0; buffer < num_buffers; ++buffer) { >> /* Allocate vb2 buffer structures */ >> @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, >> vb->planes[plane].min_length = plane_sizes[plane]; >> } >> >> - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer); >> + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer); > In this case it should also be fine, but actually now this is a loop and if > somone doesn't know what the other code in the loop does, one could be > concerned that the num buffers actually could have changed, but we still > use the cached one that we got at the beginning of the function. > > (Ideally I'd imagine vb2_queue_add_buffer() to append the buffer > at the end of the queue and increment the num_buffers internally, but it > doesn't have to happen now, as this series is already quite complex...) That will be the case later in the series when I replace num_buffers field by a bitmap. Until that I prefer to limit the changes in this loop. > >> call_void_bufop(q, init_buffer, vb); >> >> /* Allocate video buffer memory for the MMAP type */ > [snip] >> @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q) >> __vb2_cleanup_fileio(q); >> __vb2_queue_cancel(q); >> mutex_lock(&q->mmap_lock); >> - __vb2_queue_free(q, q->num_buffers); >> + __vb2_queue_free(q, vb2_get_num_buffers(q)); >> + q->num_buffers = 0; > Unrelated change? No because I found a case where q->num_buffers wasn't correctly reset while testing. > >> mutex_unlock(&q->mmap_lock); >> } >> EXPORT_SYMBOL_GPL(vb2_core_queue_release); >> @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, >> /* >> * Start file I/O emulator only if streaming API has not been used yet. >> */ >> - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) { >> + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) { >> if (!q->is_output && (q->io_modes & VB2_READ) && >> (req_events & (EPOLLIN | EPOLLRDNORM))) { >> if (__vb2_init_fileio(q, 1)) >> @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, >> * For output streams you can call write() as long as there are fewer >> * buffers queued than there are buffers available. >> */ >> - if (q->is_output && q->fileio && q->queued_count < q->num_buffers) >> + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q)) >> return EPOLLOUT | EPOLLWRNORM; >> >> if (list_empty(&q->done_list)) { >> @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf { >> * struct vb2_fileio_data - queue context used by file io emulator >> * >> * @cur_index: the index of the buffer currently being read from or >> - * written to. If equal to q->num_buffers then a new buffer >> - * must be dequeued. >> + * written to. If equal to number of already queued buffers >> + * then a new buffer must be dequeued. > Hmm, that's a significant meaning change compared to the original text. Is > it indended? Does "If equal to number of buffers in the vb2_queue then a new buffer must be dequeued." sound better for you ? > >> * @initial_index: in the read() case all buffers are queued up immediately >> * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles >> * buffers. However, in the write() case no buffers are initially >> @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf { >> * buffers. This means that initially __vb2_perform_fileio() >> * needs to know what buffer index to use when it is queuing up >> * the buffers for the first time. That initial index is stored >> - * in this field. Once it is equal to q->num_buffers all >> + * in this field. Once it is equal to num_buffers all > It's not clear what num_buffers means here. Would it make sense to instead > say "number of buffers in the vb2_queue"? Yes I will change that > >> * available buffers have been queued and __vb2_perform_fileio() >> * should start the normal dequeue/queue cycle. >> * >> @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) >> /* >> * Check if streaming api has not been already activated. >> */ >> - if (q->streaming || q->num_buffers > 0) >> + if (q->streaming || vb2_get_num_buffers(q) > 0) >> return -EBUSY; >> >> /* >> @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) >> /* >> * Get kernel address of each buffer. >> */ >> - for (i = 0; i < q->num_buffers; i++) { >> + for (i = 0; i < vb2_get_num_buffers(q); i++) { >> /* vb can never be NULL when using fileio. */ >> vb = vb2_get_buffer(q, i); >> >> @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) >> /* >> * Queue all buffers. >> */ >> - for (i = 0; i < q->num_buffers; i++) { >> - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL); >> + for (i = 0; i < vb2_get_num_buffers(q); i++) { >> + struct vb2_buffer *vb2 = vb2_get_buffer(q, i); >> + >> + if (!vb2) >> + continue; >> + >> + ret = vb2_core_qbuf(q, vb2, NULL, NULL); >> if (ret) >> goto err_reqbufs; >> fileio->bufs[i].queued = 1; >> } > Doesn't this part belong to the previous patch that changes q->bufs[x] to > vb2_get_buffer()? Yes I will change that too. > >> /* >> * All buffers have been queued, so mark that by setting >> - * initial_index to q->num_buffers >> + * initial_index to num_buffers > What num_buffers? I will use your wording: "the number of buffers in the vb2_queue" > >> */ >> - fileio->initial_index = q->num_buffers; >> - fileio->cur_index = q->num_buffers; >> + fileio->initial_index = vb2_get_num_buffers(q); >> + fileio->cur_index = fileio->initial_index; >> } >> >> /* >> @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_ >> * If we are queuing up buffers for the first time, then >> * increase initial_index by one. >> */ >> - if (fileio->initial_index < q->num_buffers) >> + if (fileio->initial_index < vb2_get_num_buffers(q)) >> fileio->initial_index++; >> /* >> * The next buffer to use is either a buffer that's going to be >> - * queued for the first time (initial_index < q->num_buffers) >> - * or it is equal to q->num_buffers, meaning that the next >> + * queued for the first time (initial_index < num_buffers) >> + * or it is equal to num_buffers, meaning that the next > What num_buffers? Same here > > Best regards, > Tomasz > _______________________________________________ > Kernel mailing list -- kernel@mailman.collabora.com > To unsubscribe send an email to kernel-leave@mailman.collabora.com
On Wed, Nov 8, 2023 at 10:22 PM Benjamin Gaignard <benjamin.gaignard@collabora.com> wrote: > > > Le 08/11/2023 à 10:42, Tomasz Figa a écrit : > > On Tue, Oct 31, 2023 at 05:30:16PM +0100, Benjamin Gaignard wrote: > >> Stop using queue num_buffers field directly, instead use > >> vb2_get_num_buffers(). > >> This prepares for the future 'delete buffers' feature where there are > >> holes in the buffer indices. > >> > >> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> > >> --- > >> .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++-------- > >> .../media/common/videobuf2/videobuf2-v4l2.c | 4 +- > >> 2 files changed, 54 insertions(+), 42 deletions(-) > >> > >> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c > >> index b406a30a9b35..c5c5ae4d213d 100644 > >> --- a/drivers/media/common/videobuf2/videobuf2-core.c > >> +++ b/drivers/media/common/videobuf2/videobuf2-core.c > >> @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, > >> unsigned int num_buffers, unsigned int num_planes, > >> const unsigned plane_sizes[VB2_MAX_PLANES]) > >> { > >> + unsigned int q_num_buffers = vb2_get_num_buffers(q); > >> unsigned int buffer, plane; > >> struct vb2_buffer *vb; > >> int ret; > >> > >> /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ > >> num_buffers = min_t(unsigned int, num_buffers, > >> - VB2_MAX_FRAME - q->num_buffers); > >> + VB2_MAX_FRAME - q_num_buffers); > > I guess it's safe in this specific situation, but was there any reason > > behind not just calling vb2_get_num_buffers() directly here? > > > >> > >> for (buffer = 0; buffer < num_buffers; ++buffer) { > >> /* Allocate vb2 buffer structures */ > >> @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, > >> vb->planes[plane].min_length = plane_sizes[plane]; > >> } > >> > >> - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer); > >> + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer); > > In this case it should also be fine, but actually now this is a loop and if > > somone doesn't know what the other code in the loop does, one could be > > concerned that the num buffers actually could have changed, but we still > > use the cached one that we got at the beginning of the function. > > > > (Ideally I'd imagine vb2_queue_add_buffer() to append the buffer > > at the end of the queue and increment the num_buffers internally, but it > > doesn't have to happen now, as this series is already quite complex...) > > That will be the case later in the series when I replace num_buffers field > by a bitmap. Until that I prefer to limit the changes in this loop. > > > > >> call_void_bufop(q, init_buffer, vb); > >> > >> /* Allocate video buffer memory for the MMAP type */ > > [snip] > >> @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q) > >> __vb2_cleanup_fileio(q); > >> __vb2_queue_cancel(q); > >> mutex_lock(&q->mmap_lock); > >> - __vb2_queue_free(q, q->num_buffers); > >> + __vb2_queue_free(q, vb2_get_num_buffers(q)); > >> + q->num_buffers = 0; > > Unrelated change? > > No because I found a case where q->num_buffers wasn't correctly reset while testing. > Could you provide more details about that case? Shouldn't it be fixed instead? It's a bit weird to me, because __vb2_queue_free() is supposed to decrement q->num_buffers by the number of buffers freed and it's called with vb2_get_num_buffers() just one line above. > > > >> mutex_unlock(&q->mmap_lock); > >> } > >> EXPORT_SYMBOL_GPL(vb2_core_queue_release); > >> @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, > >> /* > >> * Start file I/O emulator only if streaming API has not been used yet. > >> */ > >> - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) { > >> + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) { > >> if (!q->is_output && (q->io_modes & VB2_READ) && > >> (req_events & (EPOLLIN | EPOLLRDNORM))) { > >> if (__vb2_init_fileio(q, 1)) > >> @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, > >> * For output streams you can call write() as long as there are fewer > >> * buffers queued than there are buffers available. > >> */ > >> - if (q->is_output && q->fileio && q->queued_count < q->num_buffers) > >> + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q)) > >> return EPOLLOUT | EPOLLWRNORM; > >> > >> if (list_empty(&q->done_list)) { > >> @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf { > >> * struct vb2_fileio_data - queue context used by file io emulator > >> * > >> * @cur_index: the index of the buffer currently being read from or > >> - * written to. If equal to q->num_buffers then a new buffer > >> - * must be dequeued. > >> + * written to. If equal to number of already queued buffers > >> + * then a new buffer must be dequeued. > > Hmm, that's a significant meaning change compared to the original text. Is > > it indended? > > Does "If equal to number of buffers in the vb2_queue then a new buffer must be dequeued." > sound better for you ? Yes, I think now it matches the original meaning. Thanks. > > > > >> * @initial_index: in the read() case all buffers are queued up immediately > >> * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles > >> * buffers. However, in the write() case no buffers are initially > >> @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf { > >> * buffers. This means that initially __vb2_perform_fileio() > >> * needs to know what buffer index to use when it is queuing up > >> * the buffers for the first time. That initial index is stored > >> - * in this field. Once it is equal to q->num_buffers all > >> + * in this field. Once it is equal to num_buffers all > > It's not clear what num_buffers means here. Would it make sense to instead > > say "number of buffers in the vb2_queue"? > > Yes I will change that > > > > >> * available buffers have been queued and __vb2_perform_fileio() > >> * should start the normal dequeue/queue cycle. > >> * > >> @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > >> /* > >> * Check if streaming api has not been already activated. > >> */ > >> - if (q->streaming || q->num_buffers > 0) > >> + if (q->streaming || vb2_get_num_buffers(q) > 0) > >> return -EBUSY; > >> > >> /* > >> @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > >> /* > >> * Get kernel address of each buffer. > >> */ > >> - for (i = 0; i < q->num_buffers; i++) { > >> + for (i = 0; i < vb2_get_num_buffers(q); i++) { > >> /* vb can never be NULL when using fileio. */ > >> vb = vb2_get_buffer(q, i); > >> > >> @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) > >> /* > >> * Queue all buffers. > >> */ > >> - for (i = 0; i < q->num_buffers; i++) { > >> - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL); > >> + for (i = 0; i < vb2_get_num_buffers(q); i++) { > >> + struct vb2_buffer *vb2 = vb2_get_buffer(q, i); > >> + > >> + if (!vb2) > >> + continue; > >> + > >> + ret = vb2_core_qbuf(q, vb2, NULL, NULL); > >> if (ret) > >> goto err_reqbufs; > >> fileio->bufs[i].queued = 1; > >> } > > Doesn't this part belong to the previous patch that changes q->bufs[x] to > > vb2_get_buffer()? > > Yes I will change that too. > > > > >> /* > >> * All buffers have been queued, so mark that by setting > >> - * initial_index to q->num_buffers > >> + * initial_index to num_buffers > > What num_buffers? > > I will use your wording: "the number of buffers in the vb2_queue" > Thanks! > > > >> */ > >> - fileio->initial_index = q->num_buffers; > >> - fileio->cur_index = q->num_buffers; > >> + fileio->initial_index = vb2_get_num_buffers(q); > >> + fileio->cur_index = fileio->initial_index; > >> } > >> > >> /* > >> @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_ > >> * If we are queuing up buffers for the first time, then > >> * increase initial_index by one. > >> */ > >> - if (fileio->initial_index < q->num_buffers) > >> + if (fileio->initial_index < vb2_get_num_buffers(q)) > >> fileio->initial_index++; > >> /* > >> * The next buffer to use is either a buffer that's going to be > >> - * queued for the first time (initial_index < q->num_buffers) > >> - * or it is equal to q->num_buffers, meaning that the next > >> + * queued for the first time (initial_index < num_buffers) > >> + * or it is equal to num_buffers, meaning that the next > > What num_buffers? > > Same here Thanks! Best regards, Tomasz
diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c index b406a30a9b35..c5c5ae4d213d 100644 --- a/drivers/media/common/videobuf2/videobuf2-core.c +++ b/drivers/media/common/videobuf2/videobuf2-core.c @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, unsigned int num_buffers, unsigned int num_planes, const unsigned plane_sizes[VB2_MAX_PLANES]) { + unsigned int q_num_buffers = vb2_get_num_buffers(q); unsigned int buffer, plane; struct vb2_buffer *vb; int ret; /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ num_buffers = min_t(unsigned int, num_buffers, - VB2_MAX_FRAME - q->num_buffers); + VB2_MAX_FRAME - q_num_buffers); for (buffer = 0; buffer < num_buffers; ++buffer) { /* Allocate vb2 buffer structures */ @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory, vb->planes[plane].min_length = plane_sizes[plane]; } - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer); + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer); call_void_bufop(q, init_buffer, vb); /* Allocate video buffer memory for the MMAP type */ @@ -514,8 +515,9 @@ static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers) { unsigned int buffer; struct vb2_buffer *vb; + unsigned int q_num_buffers = vb2_get_num_buffers(q); - for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + for (buffer = q_num_buffers - buffers; buffer < q_num_buffers; ++buffer) { vb = vb2_get_buffer(q, buffer); if (!vb) @@ -539,11 +541,12 @@ static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers) static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) { unsigned int buffer; + unsigned int q_num_buffers = vb2_get_num_buffers(q); lockdep_assert_held(&q->mmap_lock); /* Call driver-provided cleanup function for each buffer, if provided */ - for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + for (buffer = q_num_buffers - buffers; buffer < q_num_buffers; ++buffer) { struct vb2_buffer *vb = vb2_get_buffer(q, buffer); @@ -559,7 +562,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) * Check that all the calls were balanced during the life-time of this * queue. If not then dump the counters to the kernel log. */ - if (q->num_buffers) { + if (q_num_buffers) { bool unbalanced = q->cnt_start_streaming != q->cnt_stop_streaming || q->cnt_prepare_streaming != q->cnt_unprepare_streaming || q->cnt_wait_prepare != q->cnt_wait_finish; @@ -585,7 +588,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) q->cnt_stop_streaming = 0; q->cnt_unprepare_streaming = 0; } - for (buffer = 0; buffer < q->num_buffers; ++buffer) { + for (buffer = 0; buffer < vb2_get_num_buffers(q); buffer++) { struct vb2_buffer *vb = vb2_get_buffer(q, buffer); bool unbalanced; @@ -637,7 +640,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) #endif /* Free vb2 buffers */ - for (buffer = q->num_buffers - buffers; buffer < q->num_buffers; + for (buffer = q_num_buffers - buffers; buffer < q_num_buffers; ++buffer) { struct vb2_buffer *vb = vb2_get_buffer(q, buffer); @@ -649,7 +652,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers) } q->num_buffers -= buffers; - if (!q->num_buffers) { + if (!vb2_get_num_buffers(q)) { q->memory = VB2_MEMORY_UNKNOWN; INIT_LIST_HEAD(&q->queued_list); } @@ -680,7 +683,7 @@ EXPORT_SYMBOL(vb2_buffer_in_use); static bool __buffers_in_use(struct vb2_queue *q) { unsigned int buffer; - for (buffer = 0; buffer < q->num_buffers; ++buffer) { + for (buffer = 0; buffer < vb2_get_num_buffers(q); ++buffer) { struct vb2_buffer *vb = vb2_get_buffer(q, buffer); if (!vb) @@ -806,6 +809,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, unsigned int flags, unsigned int *count) { unsigned int num_buffers, allocated_buffers, num_planes = 0; + unsigned int q_num_bufs = vb2_get_num_buffers(q); unsigned plane_sizes[VB2_MAX_PLANES] = { }; bool non_coherent_mem = flags & V4L2_MEMORY_FLAG_NON_COHERENT; unsigned int i; @@ -821,7 +825,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, return -EBUSY; } - if (*count == 0 || q->num_buffers != 0 || + if (*count == 0 || q_num_bufs != 0 || (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory) || !verify_coherency_flags(q, non_coherent_mem)) { /* @@ -839,7 +843,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, * queued without ever calling STREAMON. */ __vb2_queue_cancel(q); - __vb2_queue_free(q, q->num_buffers); + __vb2_queue_free(q, q_num_bufs); mutex_unlock(&q->mmap_lock); /* @@ -934,7 +938,7 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, if (ret < 0) { /* * Note: __vb2_queue_free() will subtract 'allocated_buffers' - * from q->num_buffers and it will reset q->memory to + * from already queued buffers and it will reset q->memory to * VB2_MEMORY_UNKNOWN. */ __vb2_queue_free(q, allocated_buffers); @@ -968,10 +972,11 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, unsigned int num_planes = 0, num_buffers, allocated_buffers; unsigned plane_sizes[VB2_MAX_PLANES] = { }; bool non_coherent_mem = flags & V4L2_MEMORY_FLAG_NON_COHERENT; - bool no_previous_buffers = !q->num_buffers; - int ret; + unsigned int q_num_bufs = vb2_get_num_buffers(q); + bool no_previous_buffers = !q_num_bufs; + int ret = 0; - if (q->num_buffers == VB2_MAX_FRAME) { + if (q_num_bufs == VB2_MAX_FRAME) { dprintk(q, 1, "maximum number of buffers already allocated\n"); return -ENOBUFS; } @@ -1000,7 +1005,7 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, return -EINVAL; } - num_buffers = min(*count, VB2_MAX_FRAME - q->num_buffers); + num_buffers = min(*count, VB2_MAX_FRAME - q_num_bufs); if (requested_planes && requested_sizes) { num_planes = requested_planes; @@ -1032,7 +1037,7 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, num_buffers = allocated_buffers; /* - * q->num_buffers contains the total number of buffers, that the + * num_buffers contains the total number of buffers, that the * queue driver has set up */ ret = call_qop(q, queue_setup, q, &num_buffers, @@ -1053,7 +1058,7 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, if (ret < 0) { /* * Note: __vb2_queue_free() will subtract 'allocated_buffers' - * from q->num_buffers and it will reset q->memory to + * from already queued buffers and it will reset q->memory to * VB2_MEMORY_UNKNOWN. */ __vb2_queue_free(q, allocated_buffers); @@ -1670,7 +1675,7 @@ static int vb2_start_streaming(struct vb2_queue *q) * Forcefully reclaim buffers if the driver did not * correctly return them to vb2. */ - for (i = 0; i < q->num_buffers; ++i) { + for (i = 0; i < vb2_get_num_buffers(q); ++i) { vb = vb2_get_buffer(q, i); if (!vb) @@ -2076,7 +2081,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q) * to vb2 in stop_streaming(). */ if (WARN_ON(atomic_read(&q->owned_by_drv_count))) { - for (i = 0; i < q->num_buffers; ++i) { + for (i = 0; i < vb2_get_num_buffers(q); i++) { struct vb2_buffer *vb = vb2_get_buffer(q, i); if (!vb) @@ -2120,7 +2125,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q) * call to __fill_user_buffer() after buf_finish(). That order can't * be changed, so we can't move the buf_finish() to __vb2_dqbuf(). */ - for (i = 0; i < q->num_buffers; ++i) { + for (i = 0; i < vb2_get_num_buffers(q); i++) { struct vb2_buffer *vb; struct media_request *req; @@ -2168,6 +2173,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q) int vb2_core_streamon(struct vb2_queue *q, unsigned int type) { + unsigned int q_num_bufs = vb2_get_num_buffers(q); int ret; if (type != q->type) { @@ -2180,12 +2186,12 @@ int vb2_core_streamon(struct vb2_queue *q, unsigned int type) return 0; } - if (!q->num_buffers) { + if (!q_num_bufs) { dprintk(q, 1, "no buffers have been allocated\n"); return -EINVAL; } - if (q->num_buffers < q->min_buffers_needed) { + if (q_num_bufs < q->min_buffers_needed) { dprintk(q, 1, "need at least %u allocated buffers\n", q->min_buffers_needed); return -EINVAL; @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q) __vb2_cleanup_fileio(q); __vb2_queue_cancel(q); mutex_lock(&q->mmap_lock); - __vb2_queue_free(q, q->num_buffers); + __vb2_queue_free(q, vb2_get_num_buffers(q)); + q->num_buffers = 0; mutex_unlock(&q->mmap_lock); } EXPORT_SYMBOL_GPL(vb2_core_queue_release); @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, /* * Start file I/O emulator only if streaming API has not been used yet. */ - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) { + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) { if (!q->is_output && (q->io_modes & VB2_READ) && (req_events & (EPOLLIN | EPOLLRDNORM))) { if (__vb2_init_fileio(q, 1)) @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, * For output streams you can call write() as long as there are fewer * buffers queued than there are buffers available. */ - if (q->is_output && q->fileio && q->queued_count < q->num_buffers) + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q)) return EPOLLOUT | EPOLLWRNORM; if (list_empty(&q->done_list)) { @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf { * struct vb2_fileio_data - queue context used by file io emulator * * @cur_index: the index of the buffer currently being read from or - * written to. If equal to q->num_buffers then a new buffer - * must be dequeued. + * written to. If equal to number of already queued buffers + * then a new buffer must be dequeued. * @initial_index: in the read() case all buffers are queued up immediately * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles * buffers. However, in the write() case no buffers are initially @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf { * buffers. This means that initially __vb2_perform_fileio() * needs to know what buffer index to use when it is queuing up * the buffers for the first time. That initial index is stored - * in this field. Once it is equal to q->num_buffers all + * in this field. Once it is equal to num_buffers all * available buffers have been queued and __vb2_perform_fileio() * should start the normal dequeue/queue cycle. * @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) /* * Check if streaming api has not been already activated. */ - if (q->streaming || q->num_buffers > 0) + if (q->streaming || vb2_get_num_buffers(q) > 0) return -EBUSY; /* @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) /* * Get kernel address of each buffer. */ - for (i = 0; i < q->num_buffers; i++) { + for (i = 0; i < vb2_get_num_buffers(q); i++) { /* vb can never be NULL when using fileio. */ vb = vb2_get_buffer(q, i); @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read) /* * Queue all buffers. */ - for (i = 0; i < q->num_buffers; i++) { - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL); + for (i = 0; i < vb2_get_num_buffers(q); i++) { + struct vb2_buffer *vb2 = vb2_get_buffer(q, i); + + if (!vb2) + continue; + + ret = vb2_core_qbuf(q, vb2, NULL, NULL); if (ret) goto err_reqbufs; fileio->bufs[i].queued = 1; } /* * All buffers have been queued, so mark that by setting - * initial_index to q->num_buffers + * initial_index to num_buffers */ - fileio->initial_index = q->num_buffers; - fileio->cur_index = q->num_buffers; + fileio->initial_index = vb2_get_num_buffers(q); + fileio->cur_index = fileio->initial_index; } /* @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_ * If we are queuing up buffers for the first time, then * increase initial_index by one. */ - if (fileio->initial_index < q->num_buffers) + if (fileio->initial_index < vb2_get_num_buffers(q)) fileio->initial_index++; /* * The next buffer to use is either a buffer that's going to be - * queued for the first time (initial_index < q->num_buffers) - * or it is equal to q->num_buffers, meaning that the next + * queued for the first time (initial_index < num_buffers) + * or it is equal to num_buffers, meaning that the next * time we need to dequeue a buffer since we've now queued up * all the 'first time' buffers. */ @@ -3016,7 +3028,7 @@ static int vb2_thread(void *data) int ret = 0; if (q->is_output) { - prequeue = q->num_buffers; + prequeue = vb2_get_num_buffers(q); copy_timestamp = q->copy_timestamp; } diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c index c6ebc8d2c537..7d798fb15c0b 100644 --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c @@ -627,7 +627,7 @@ struct vb2_buffer *vb2_find_buffer(struct vb2_queue *q, u64 timestamp) * This loop doesn't scale if there is a really large number of buffers. * Maybe something more efficient will be needed in this case. */ - for (i = 0; i < q->num_buffers; i++) { + for (i = 0; i < vb2_get_num_buffers(q); i++) { vb2 = vb2_get_buffer(q, i); if (!vb2) @@ -761,7 +761,7 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) fill_buf_caps(q, &create->capabilities); validate_memory_flags(q, create->memory, &create->flags); - create->index = q->num_buffers; + create->index = vb2_get_num_buffers(q); if (create->count == 0) return ret != -EBUSY ? ret : 0;
Stop using queue num_buffers field directly, instead use vb2_get_num_buffers(). This prepares for the future 'delete buffers' feature where there are holes in the buffer indices. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> --- .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++-------- .../media/common/videobuf2/videobuf2-v4l2.c | 4 +- 2 files changed, 54 insertions(+), 42 deletions(-)