mbox series

[v2,0/2] media: i2c: Add driver for OmniVision OV64A40

Message ID 20231114182831.220823-1-jacopo.mondi@ideasonboard.com (mailing list archive)
Headers show
Series media: i2c: Add driver for OmniVision OV64A40 | expand

Message

Jacopo Mondi Nov. 14, 2023, 6:28 p.m. UTC
Add a v4l2 sensor driver for OmniVision OV64A40

v1->v2:
* rebased on sailus master
  * Use new subdev state helpers
* link frequency support (456MHz, 360MHz)
* invert vflip bit setting
* remove 1280x720 mode as it was broken
* expanded VTS range to 24 bits
* Reduce max resolution output to 9152x6944. Using full output resolution causes
  green frames to be produced by the ISP (the raw frames are however correct)
* reduce max analogue gain to 16x

./utils/v4l2-compliance/v4l2-compliance -d /dev/v4l-subdev0
v4l2-compliance 1.25.0-5100, 32 bits, 32-bit time_t
v4l2-compliance SHA: 8bf6cba8c0ef 2023-10-10 12:50:46

Compliance test for device /dev/v4l-subdev0:

Driver Info:
	Driver version   : 6.2.16
	Capabilities     : 0x00000000

Required ioctls:
	test VIDIOC_SUDBEV_QUERYCAP: OK
	test invalid ioctls: OK

Allow for multiple opens:
	test second /dev/v4l-subdev0 open: OK
	test VIDIOC_SUBDEV_QUERYCAP: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
	test VIDIOC_QUERYCTRL: OK
	test VIDIOC_G/S_CTRL: OK
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 14 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK (Not Supported)
	test VIDIOC_TRY_FMT: OK (Not Supported)
	test VIDIOC_S_FMT: OK (Not Supported)
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK (Not Supported)

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
	test VIDIOC_EXPBUF: OK (Not Supported)
	test Requests: OK (Not Supported)
	test TIME32/64: OK

Total for device /dev/v4l-subdev0: 44, Succeeded: 44, Failed: 0, Warnings: 0

Jacopo Mondi (2):
  media: dt-bindings: Add OmniVision OV64A40
  media: i2c: Add driver for OmniVision OV64A40

 .../bindings/media/i2c/ovti,ov64a40.yaml      |   98 +
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   10 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/ov64a40.c                   | 3646 +++++++++++++++++
 5 files changed, 3763 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
 create mode 100644 drivers/media/i2c/ov64a40.c


base-commit: 61ab89c1916219ccbeca9f6cefb1680212de8d1c
--
2.41.0

Comments

Jacopo Mondi Nov. 15, 2023, 1:42 p.m. UTC | #1
Hi myself

On Tue, Nov 14, 2023 at 07:28:29PM +0100, Jacopo Mondi wrote:
> Add a v4l2 sensor driver for OmniVision OV64A40
>
> v1->v2:
> * rebased on sailus master
>   * Use new subdev state helpers
> * link frequency support (456MHz, 360MHz)
> * invert vflip bit setting
> * remove 1280x720 mode as it was broken
> * expanded VTS range to 24 bits
> * Reduce max resolution output to 9152x6944. Using full output resolution causes
>   green frames to be produced by the ISP (the raw frames are however correct)

This should actually be kept downstream, as the frames produced at
full 9248x6944 resolution are correct.

> * reduce max analogue gain to 16x
>
> ./utils/v4l2-compliance/v4l2-compliance -d /dev/v4l-subdev0
> v4l2-compliance 1.25.0-5100, 32 bits, 32-bit time_t
> v4l2-compliance SHA: 8bf6cba8c0ef 2023-10-10 12:50:46
>
> Compliance test for device /dev/v4l-subdev0:
>
> Driver Info:
> 	Driver version   : 6.2.16
> 	Capabilities     : 0x00000000
>
> Required ioctls:
> 	test VIDIOC_SUDBEV_QUERYCAP: OK
> 	test invalid ioctls: OK
>
> Allow for multiple opens:
> 	test second /dev/v4l-subdev0 open: OK
> 	test VIDIOC_SUBDEV_QUERYCAP: OK
> 	test for unlimited opens: OK
>
> Debug ioctls:
> 	test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
> 	Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> 	Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> 	test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> 	test VIDIOC_QUERYCTRL: OK
> 	test VIDIOC_G/S_CTRL: OK
> 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> 	Standard Controls: 14 Private Controls: 0
>
> Format ioctls:
> 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
> 	test VIDIOC_G/S_PARM: OK (Not Supported)
> 	test VIDIOC_G_FBUF: OK (Not Supported)
> 	test VIDIOC_G_FMT: OK (Not Supported)
> 	test VIDIOC_TRY_FMT: OK (Not Supported)
> 	test VIDIOC_S_FMT: OK (Not Supported)
> 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> 	test Cropping: OK (Not Supported)
> 	test Composing: OK (Not Supported)
> 	test Scaling: OK (Not Supported)
>
> Codec ioctls:
> 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
> 	test VIDIOC_EXPBUF: OK (Not Supported)
> 	test Requests: OK (Not Supported)
> 	test TIME32/64: OK
>
> Total for device /dev/v4l-subdev0: 44, Succeeded: 44, Failed: 0, Warnings: 0
>
> Jacopo Mondi (2):
>   media: dt-bindings: Add OmniVision OV64A40
>   media: i2c: Add driver for OmniVision OV64A40
>
>  .../bindings/media/i2c/ovti,ov64a40.yaml      |   98 +
>  MAINTAINERS                                   |    8 +
>  drivers/media/i2c/Kconfig                     |   10 +
>  drivers/media/i2c/Makefile                    |    1 +
>  drivers/media/i2c/ov64a40.c                   | 3646 +++++++++++++++++
>  5 files changed, 3763 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
>  create mode 100644 drivers/media/i2c/ov64a40.c
>
>
> base-commit: 61ab89c1916219ccbeca9f6cefb1680212de8d1c
> --
> 2.41.0
>