diff mbox series

[v3,2/5] phy: phy-rockchip-inno-usb2: Add RK3128 support

Message ID 20231119121340.109025-3-knaerzche@gmail.com
State Accepted
Commit 62ff41017e147472b07de6125c3be82ce02a8dd7
Headers show
Series Add USB support for RK3128 | expand

Commit Message

Alex Bee Nov. 19, 2023, 12:13 p.m. UTC 
Add registers to support the 2-port usb2 phy found in RK312x SoC familiy.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
Changes in v3:
 - added phy_tuning-callback for RK3128
 
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)

Comments

Heiko Stuebner Nov. 20, 2023, 2:51 p.m. UTC | #1 
Am Sonntag, 19. November 2023, 13:13:37 CET schrieb Alex Bee:
> Add registers to support the 2-port usb2 phy found in RK312x SoC familiy.
> 
> Signed-off-by: Alex Bee <knaerzche@gmail.com>
> ---
> Changes in v3:
>  - added phy_tuning-callback for RK3128
>  
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

Vinod, can you pick up patches 1+2 if they seem ok to you?
Patches 3-5 are more or less independent from the phy changes
(the rk3128-usbphy was already documented in the binding,
 so I'll pick 3-5 now)

Thanks
Heiko
diff mbox series

Patch

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index b5a1d30df83a..4f71373ae6e1 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1487,6 +1487,14 @@  static int rockchip_usb2phy_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
+{
+	/* Turn off differential receiver in suspend mode */
+	return regmap_write_bits(rphy->grf, 0x298,
+				BIT(2) << BIT_WRITEABLE_SHIFT | BIT(2),
+				BIT(2) << BIT_WRITEABLE_SHIFT | 0);
+}
+
 static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 {
 	int ret;
@@ -1536,6 +1544,54 @@  static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 	return ret;
 }
 
+static const struct rockchip_usb2phy_cfg rk3128_phy_cfgs[] = {
+	{
+		.reg = 0x17c,
+		.num_ports	= 2,
+		.phy_tuning	= rk3128_usb2phy_tuning,
+		.clkout_ctl	= { 0x0190, 15, 15, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x017c, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x017c, 14, 14, 0, 1 },
+				.bvalid_det_st	= { 0x017c, 15, 15, 0, 1 },
+				.bvalid_det_clr	= { 0x017c, 15, 15, 0, 1 },
+				.idfall_det_en  = { 0x01a0, 2, 2, 0, 1 },
+				.idfall_det_st  = { 0x01a0, 3, 3, 0, 1 },
+				.idfall_det_clr = { 0x01a0, 3, 3, 0, 1 },
+				.idrise_det_en  = { 0x01a0, 0, 0, 0, 1 },
+				.idrise_det_st  = { 0x01a0, 1, 1, 0, 1 },
+				.idrise_det_clr = { 0x01a0, 1, 1, 0, 1 },
+				.ls_det_en	= { 0x017c, 12, 12, 0, 1 },
+				.ls_det_st	= { 0x017c, 13, 13, 0, 1 },
+				.ls_det_clr	= { 0x017c, 13, 13, 0, 1 },
+				.utmi_bvalid	= { 0x014c, 5, 5, 0, 1 },
+				.utmi_id	= { 0x014c, 8, 8, 0, 1 },
+				.utmi_ls	= { 0x014c, 7, 6, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0194, 8, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0194, 14, 14, 0, 1 },
+				.ls_det_st	= { 0x0194, 15, 15, 0, 1 },
+				.ls_det_clr	= { 0x0194, 15, 15, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x017c, 3, 0, 5, 1 },
+			.cp_det		= { 0x02c0, 6, 6, 0, 1 },
+			.dcp_det	= { 0x02c0, 5, 5, 0, 1 },
+			.dp_det		= { 0x02c0, 7, 7, 0, 1 },
+			.idm_sink_en	= { 0x0184, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0184, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0184, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0184, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0184, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0184, 11, 11, 0, 1 },
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
 	{
 		.reg = 0x760,
@@ -2031,6 +2087,7 @@  static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 
 static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+	{ .compatible = "rockchip,rk3128-usb2phy", .data = &rk3128_phy_cfgs },
 	{ .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
 	{ .compatible = "rockchip,rk3308-usb2phy", .data = &rk3308_phy_cfgs },
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },