| Message ID | 20231120135041.15259-12-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: phy: Support DT PHY package | expand |
On Mon, Nov 20, 2023 at 02:50:38PM +0100, Christian Marangi wrote: > From: Robert Marko <robert.marko@sartura.hr> > > Add DT bindings defined for Qualcomm QCA807x PHY series related to > calibration and DAC settings. > > Signed-off-by: Robert Marko <robert.marko@sartura.hr> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 include/dt-bindings/net/qcom-qca807x.h > > diff --git a/include/dt-bindings/net/qcom-qca807x.h b/include/dt-bindings/net/qcom-qca807x.h > new file mode 100644 > index 000000000000..42c45c7d5210 > --- /dev/null > +++ b/include/dt-bindings/net/qcom-qca807x.h > @@ -0,0 +1,45 @@ > +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ > +/* > + * Device Tree constants for the Qualcomm QCA807X PHYs > + */ > + > +#ifndef _DT_BINDINGS_QCOM_QCA807X_H > +#define _DT_BINDINGS_QCOM_QCA807X_H > + > +#define PSGMII_QSGMII_TX_DRIVER_140MV 0 > +#define PSGMII_QSGMII_TX_DRIVER_160MV 1 > +#define PSGMII_QSGMII_TX_DRIVER_180MV 2 > +#define PSGMII_QSGMII_TX_DRIVER_200MV 3 > +#define PSGMII_QSGMII_TX_DRIVER_220MV 4 > +#define PSGMII_QSGMII_TX_DRIVER_240MV 5 > +#define PSGMII_QSGMII_TX_DRIVER_260MV 6 > +#define PSGMII_QSGMII_TX_DRIVER_280MV 7 > +#define PSGMII_QSGMII_TX_DRIVER_300MV 8 > +#define PSGMII_QSGMII_TX_DRIVER_320MV 9 > +#define PSGMII_QSGMII_TX_DRIVER_400MV 10 > +#define PSGMII_QSGMII_TX_DRIVER_500MV 11 > +/* Default value */ > +#define PSGMII_QSGMII_TX_DRIVER_600MV 12 Its not clear what these are used for. I think these are actually package properties, so having the correctly documented in the binding would help a lot understand why we need package properties. Actually using #define like this is probably wrong. You should just have a u32 tx_driver_mv property, and list [140, 160, 180, 200, ... 600] as valid values. The driver should then convert to whatever value it should write into the register. Andrew
diff --git a/include/dt-bindings/net/qcom-qca807x.h b/include/dt-bindings/net/qcom-qca807x.h new file mode 100644 index 000000000000..42c45c7d5210 --- /dev/null +++ b/include/dt-bindings/net/qcom-qca807x.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/* + * Device Tree constants for the Qualcomm QCA807X PHYs + */ + +#ifndef _DT_BINDINGS_QCOM_QCA807X_H +#define _DT_BINDINGS_QCOM_QCA807X_H + +#define PSGMII_QSGMII_TX_DRIVER_140MV 0 +#define PSGMII_QSGMII_TX_DRIVER_160MV 1 +#define PSGMII_QSGMII_TX_DRIVER_180MV 2 +#define PSGMII_QSGMII_TX_DRIVER_200MV 3 +#define PSGMII_QSGMII_TX_DRIVER_220MV 4 +#define PSGMII_QSGMII_TX_DRIVER_240MV 5 +#define PSGMII_QSGMII_TX_DRIVER_260MV 6 +#define PSGMII_QSGMII_TX_DRIVER_280MV 7 +#define PSGMII_QSGMII_TX_DRIVER_300MV 8 +#define PSGMII_QSGMII_TX_DRIVER_320MV 9 +#define PSGMII_QSGMII_TX_DRIVER_400MV 10 +#define PSGMII_QSGMII_TX_DRIVER_500MV 11 +/* Default value */ +#define PSGMII_QSGMII_TX_DRIVER_600MV 12 + +/* Full amplitude, full bias current */ +#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0 +/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */ +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1 +/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */ +#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2 +/* Both amplitude and bias current follow DSP */ +#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3 +/* Full amplitude, half bias current */ +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4 +/* Amplitude follow DSP setting; 1/4 bias current when cable<10m, + * otherwise half bias current + */ +#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5 +/* Full amplitude; same bias current setting with “010” and “011”, + * but half more bias is reduced when cable <10m + */ +#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6 +/* Amplitude follow DSP; same bias current setting with “110”, default value */ +#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7 + +#endif