diff mbox series

[6/6] net: ravb: Keep reverse order of operations in ravb_remove()

Message ID 20231127090426.3761729-7-claudiu.beznea.uj@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: ravb: Fixes for the ravb driver | expand

Checks

Context Check Description
netdev/series_format warning Target tree name not specified in the subject
netdev/codegen success Generated files up to date
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1115 this patch: 1115
netdev/cc_maintainers success CCed 11 of 12 maintainers
netdev/build_clang success Errors and warnings before: 1142 this patch: 1142
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 1142 this patch: 1142
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 35 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Claudiu Nov. 27, 2023, 9:04 a.m. UTC
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
MACs and PHYs it has been discovered that doing unbind/bind for ravb
driver in a loop leads to wrong speed and duplex for Ethernet links and
broken connectivity (the connectivity cannot be restored even with
bringing interface down/up). Before doing unbind/bind the Ethernet
interfaces were configured though systemd. The sh instructions used to
do unbind/bind were:

$ cd /sys/bus/platform/drivers/ravb/
$ while :; do echo 11c30000.ethernet > unbind ; \
  echo 11c30000.ethernet > bind; done

It has been discovered that there is a race b/w IOCTLs initialized by
systemd at the response of success binding and the
"ravb_write(ndev, CCC_OPC_RESET, CCC)" instruction in ravb_remove() as
follows:

1/ as a result of bind success the user space open/configures the
   interfaces tough an IOCTL; the following stack trace has been
   identified on RZ/G3S:

Call trace:
dump_backtrace+0x9c/0x100
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x28
ravb_open+0x70/0xa58
__dev_open+0xf4/0x1e8
__dev_change_flags+0x198/0x218
dev_change_flags+0x2c/0x80
devinet_ioctl+0x640/0x708
inet_ioctl+0x1e4/0x200
sock_do_ioctl+0x50/0x108
sock_ioctl+0x240/0x358
__arm64_sys_ioctl+0xb0/0x100
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x190/0x198

2/ this call may execute concurrently with ravb_remove() as the
   unbind/bind operation was executed in a loop
3/ if the operation mode is changed to RESET (though
   ravb_write(ndev, CCC_OPC_RESET, CCC) instruction in ravb_remove())
   while the above ravb_open() is in progress it may lead to MAC
   (or PHY, or MAC-PHY connection, the right point hasn't been identified
   at the moment) to be broken, thus the Ethernet connectivity fails to
   restore.

The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
after unregister_netdev() to avoid resetting the controller while the
netdev interface is still registered.

To avoid future issues in ravb_remove(), the patch follows the proper order
of operations in ravb_remove(): reverse order compared with ravb_probe().
This avoids described races as the IOCTLs as well as unregister_netdev()
(called now at the beginning of ravb_remove()) calls rtnl_lock() before
continuing and IOCTLs check (though devinet_ioctl()) if device is still
registered just after taking the lock:

int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
{
	// ...

        rtnl_lock();

        ret = -ENODEV;
        dev = __dev_get_by_name(net, ifr->ifr_name);
        if (!dev)
                goto done;

	// ...
done:
        rtnl_unlock();
out:
        return ret;
}

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes since [1]:
- none; this patch is new

[1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/

 drivers/net/ethernet/renesas/ravb_main.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

Comments

Sergey Shtylyov Nov. 27, 2023, 5:16 p.m. UTC | #1
On 11/27/23 12:04 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet
> MACs and PHYs it has been discovered that doing unbind/bind for ravb
> driver in a loop leads to wrong speed and duplex for Ethernet links and
> broken connectivity (the connectivity cannot be restored even with
> bringing interface down/up). Before doing unbind/bind the Ethernet
> interfaces were configured though systemd. The sh instructions used to
> do unbind/bind were:
> 
> $ cd /sys/bus/platform/drivers/ravb/
> $ while :; do echo 11c30000.ethernet > unbind ; \
>   echo 11c30000.ethernet > bind; done
> 
> It has been discovered that there is a race b/w IOCTLs initialized by
> systemd at the response of success binding and the
> "ravb_write(ndev, CCC_OPC_RESET, CCC)" instruction in ravb_remove() as

   s/instruction/call/, perhaps?

> follows:
> 
> 1/ as a result of bind success the user space open/configures the
>    interfaces tough an IOCTL; the following stack trace has been
>    identified on RZ/G3S:
> 
> Call trace:
> dump_backtrace+0x9c/0x100
> show_stack+0x20/0x38
> dump_stack_lvl+0x48/0x60
> dump_stack+0x18/0x28
> ravb_open+0x70/0xa58
> __dev_open+0xf4/0x1e8
> __dev_change_flags+0x198/0x218
> dev_change_flags+0x2c/0x80
> devinet_ioctl+0x640/0x708
> inet_ioctl+0x1e4/0x200
> sock_do_ioctl+0x50/0x108
> sock_ioctl+0x240/0x358
> __arm64_sys_ioctl+0xb0/0x100
> invoke_syscall+0x50/0x128
> el0_svc_common.constprop.0+0xc8/0xf0
> do_el0_svc+0x24/0x38
> el0_svc+0x34/0xb8
> el0t_64_sync_handler+0xc0/0xc8
> el0t_64_sync+0x190/0x198
> 
> 2/ this call may execute concurrently with ravb_remove() as the
>    unbind/bind operation was executed in a loop
> 3/ if the operation mode is changed to RESET (though

   Through?

>    ravb_write(ndev, CCC_OPC_RESET, CCC) instruction in ravb_remove())

   s/instruction/call/, perhaps?

>    while the above ravb_open() is in progress it may lead to MAC
>    (or PHY, or MAC-PHY connection, the right point hasn't been identified
>    at the moment) to be broken, thus the Ethernet connectivity fails to
>    restore.
> 
> The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC))
> after unregister_netdev() to avoid resetting the controller while the
> netdev interface is still registered.
> 
> To avoid future issues in ravb_remove(), the patch follows the proper order
> of operations in ravb_remove(): reverse order compared with ravb_probe().
> This avoids described races as the IOCTLs as well as unregister_netdev()
> (called now at the beginning of ravb_remove()) calls rtnl_lock() before
> continuing and IOCTLs check (though devinet_ioctl()) if device is still
> registered just after taking the lock:
> 
> int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
> {
> 	// ...
> 
>         rtnl_lock();
> 
>         ret = -ENODEV;
>         dev = __dev_get_by_name(net, ifr->ifr_name);
>         if (!dev)
>                 goto done;
> 
> 	// ...
> done:
>         rtnl_unlock();
> out:
>         return ret;
> }
> 
> Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>

[...]

   Sorry for overlooking this race (and other bugs) when prepping
the driver for upstream!

MBR, Sergey
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 805720166ef3..9cad10db59b7 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -2894,22 +2894,26 @@  static void ravb_remove(struct platform_device *pdev)
 	struct ravb_private *priv = netdev_priv(ndev);
 	const struct ravb_hw_info *info = priv->info;
 
-	/* Stop PTP Clock driver */
-	if (info->ccc_gac)
-		ravb_ptp_stop(ndev);
-
-	clk_disable_unprepare(priv->gptp_clk);
-	clk_disable_unprepare(priv->refclk);
-
-	/* Set reset mode */
-	ravb_write(ndev, CCC_OPC_RESET, CCC);
 	unregister_netdev(ndev);
 	if (info->nc_queues)
 		netif_napi_del(&priv->napi[RAVB_NC]);
 	netif_napi_del(&priv->napi[RAVB_BE]);
+
 	ravb_mdio_release(priv);
+
+	/* Stop PTP Clock driver */
+	if (info->ccc_gac)
+		ravb_ptp_stop(ndev);
+
 	dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
 			  priv->desc_bat_dma);
+
+	/* Set reset mode */
+	ravb_write(ndev, CCC_OPC_RESET, CCC);
+
+	clk_disable_unprepare(priv->gptp_clk);
+	clk_disable_unprepare(priv->refclk);
+
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	reset_control_assert(priv->rstc);