| Message ID | 1700729190-17268-2-git-send-email-quic_cang@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v5,01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params | expand |
On Thu, Nov 23, 2023 at 12:46:21AM -0800, Can Guo wrote: > Structure ufs_dev_params is actually used in UFS host vendor drivers to > declare host specific power mode parameters, like ufs_<vendor>_params or > host_cap, which makes the code not very straightforward to read. Rename the > structure ufs_dev_params to ufs_host_params and unify the declarations in > all vendor drivers to host_params. > > In addition, rename the two functions ufshcd_init_pwr_dev_param() and > ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to > ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to > avoid confusions. > > This change does not change any functionalities or logic. > > Acked-by: Andrew Halaney <ahalaney@redhat.com> > Signed-off-by: Can Guo <quic_cang@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/ufs/host/ufs-exynos.c | 7 ++-- > drivers/ufs/host/ufs-hisi.c | 11 +++---- > drivers/ufs/host/ufs-mediatek.c | 12 +++---- > drivers/ufs/host/ufs-qcom.c | 12 +++---- > drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- > drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- > 6 files changed, 57 insertions(+), 64 deletions(-) > > diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c > index 71bd6db..674f2f4 100644 > --- a/drivers/ufs/host/ufs-exynos.c > +++ b/drivers/ufs/host/ufs-exynos.c > @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, > { > struct exynos_ufs *ufs = ufshcd_get_variant(hba); > struct phy *generic_phy = ufs->phy; > - struct ufs_dev_params ufs_exynos_cap; > + struct ufs_host_params host_params; > int ret; > > if (!dev_req_params) { > @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, > goto out; > } > > - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); > + ufshcd_init_host_param(&host_params); > > - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, > - dev_max_params, dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > pr_err("%s: failed to determine capabilities\n", __func__); > goto out; > diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c > index 0229ac0..bb0c9a7 100644 > --- a/drivers/ufs/host/ufs-hisi.c > +++ b/drivers/ufs/host/ufs-hisi.c > @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, > return err; > } > > -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) > +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) > { > - ufshcd_init_pwr_dev_param(hisi_param); > + ufshcd_init_host_param(host_params); > } > > static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) > @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_max_params, > struct ufs_pa_layer_attr *dev_req_params) > { > - struct ufs_dev_params ufs_hisi_cap; > + struct ufs_host_params host_params; > int ret = 0; > > if (!dev_req_params) { > @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, > > switch (status) { > case PRE_CHANGE: > - ufs_hisi_set_dev_cap(&ufs_hisi_cap); > - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, > - dev_max_params, dev_req_params); > + ufs_hisi_set_dev_cap(&host_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > dev_err(hba->dev, > "%s: failed to determine capabilities\n", __func__); > diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c > index fc61790..016067d 100644 > --- a/drivers/ufs/host/ufs-mediatek.c > +++ b/drivers/ufs/host/ufs-mediatek.c > @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_req_params) > { > struct ufs_mtk_host *host = ufshcd_get_variant(hba); > - struct ufs_dev_params host_cap; > + struct ufs_host_params host_params; > int ret; > > - ufshcd_init_pwr_dev_param(&host_cap); > - host_cap.hs_rx_gear = UFS_HS_G5; > - host_cap.hs_tx_gear = UFS_HS_G5; > + ufshcd_init_host_param(&host_params); > + host_params.hs_rx_gear = UFS_HS_G5; > + host_params.hs_tx_gear = UFS_HS_G5; > > - ret = ufshcd_get_pwr_dev_param(&host_cap, > - dev_max_params, > - dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > pr_info("%s: failed to determine capabilities\n", > __func__); > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c > index 96cb8b5..aee66a3 100644 > --- a/drivers/ufs/host/ufs-qcom.c > +++ b/drivers/ufs/host/ufs-qcom.c > @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_req_params) > { > struct ufs_qcom_host *host = ufshcd_get_variant(hba); > - struct ufs_dev_params ufs_qcom_cap; > + struct ufs_host_params host_params; > int ret = 0; > > if (!dev_req_params) { > @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, > > switch (status) { > case PRE_CHANGE: > - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); > - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; > + ufshcd_init_host_param(&host_params); > + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; > > /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ > - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); > + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); > > - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, > - dev_max_params, > - dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > dev_err(hba->dev, "%s: failed to determine capabilities\n", > __func__); > diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c > index da2558e..9ec11b9 100644 > --- a/drivers/ufs/host/ufshcd-pltfrm.c > +++ b/drivers/ufs/host/ufshcd-pltfrm.c > @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) > } > > /** > - * ufshcd_get_pwr_dev_param - get finally agreed attributes for > - * power mode change > - * @pltfrm_param: pointer to platform parameters > + * ufshcd_negotiate_pwr_param - find power mode settings that are supported by > + both the controller and the device > + * @host_param: pointer to host parameters > * @dev_max: pointer to device attributes > * @agreed_pwr: returned agreed attributes > * > * Return: 0 on success, non-zero value on failure. > */ > -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > - const struct ufs_pa_layer_attr *dev_max, > - struct ufs_pa_layer_attr *agreed_pwr) > +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, > + const struct ufs_pa_layer_attr *dev_max, > + struct ufs_pa_layer_attr *agreed_pwr) > { > - int min_pltfrm_gear; > + int min_host_gear; > int min_dev_gear; > bool is_dev_sup_hs = false; > - bool is_pltfrm_max_hs = false; > + bool is_host_max_hs = false; > > if (dev_max->pwr_rx == FAST_MODE) > is_dev_sup_hs = true; > > - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { > - is_pltfrm_max_hs = true; > - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, > - pltfrm_param->hs_tx_gear); > + if (host_param->desired_working_mode == UFS_HS_MODE) { > + is_host_max_hs = true; > + min_host_gear = min_t(u32, host_param->hs_rx_gear, > + host_param->hs_tx_gear); > } else { > - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, > - pltfrm_param->pwm_tx_gear); > + min_host_gear = min_t(u32, host_param->pwm_rx_gear, > + host_param->pwm_tx_gear); > } > > /* > - * device doesn't support HS but > - * pltfrm_param->desired_working_mode is HS, > - * thus device and pltfrm_param don't agree > + * device doesn't support HS but host_param->desired_working_mode is HS, > + * thus device and host_param don't agree > */ > - if (!is_dev_sup_hs && is_pltfrm_max_hs) { > + if (!is_dev_sup_hs && is_host_max_hs) { > pr_info("%s: device doesn't support HS\n", > __func__); > return -ENOTSUPP; > - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { > + } else if (is_dev_sup_hs && is_host_max_hs) { > /* > * since device supports HS, it supports FAST_MODE. > - * since pltfrm_param->desired_working_mode is also HS > + * since host_param->desired_working_mode is also HS > * then final decision (FAST/FASTAUTO) is done according > * to pltfrm_params as it is the restricting factor > */ > - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; > + agreed_pwr->pwr_rx = host_param->rx_pwr_hs; > agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; > } else { > /* > - * here pltfrm_param->desired_working_mode is PWM. > + * here host_param->desired_working_mode is PWM. > * it doesn't matter whether device supports HS or PWM, > - * in both cases pltfrm_param->desired_working_mode will > + * in both cases host_param->desired_working_mode will > * determine the mode > */ > - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; > + agreed_pwr->pwr_rx = host_param->rx_pwr_pwm; > agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; > } > > @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > * the same decision will be made for rx > */ > agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, > - pltfrm_param->tx_lanes); > + host_param->tx_lanes); > agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, > - pltfrm_param->rx_lanes); > + host_param->rx_lanes); > > /* device maximum gear is the minimum between device rx and tx gears */ > min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); > @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > * what is the gear, as it is the one that also decided previously what > * pwr the device will be configured to. > */ > - if ((is_dev_sup_hs && is_pltfrm_max_hs) || > - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { > + if ((is_dev_sup_hs && is_host_max_hs) || > + (!is_dev_sup_hs && !is_host_max_hs)) { > agreed_pwr->gear_rx = > - min_t(u32, min_dev_gear, min_pltfrm_gear); > + min_t(u32, min_dev_gear, min_host_gear); > } else if (!is_dev_sup_hs) { > agreed_pwr->gear_rx = min_dev_gear; > } else { > - agreed_pwr->gear_rx = min_pltfrm_gear; > + agreed_pwr->gear_rx = min_host_gear; > } > agreed_pwr->gear_tx = agreed_pwr->gear_rx; > > - agreed_pwr->hs_rate = pltfrm_param->hs_rate; > + agreed_pwr->hs_rate = host_param->hs_rate; > > return 0; > } > -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); > +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_param); > > -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) > +void ufshcd_init_host_param(struct ufs_host_params *host_param) > { > - *dev_param = (struct ufs_dev_params){ > + *host_param = (struct ufs_host_params){ > .tx_lanes = UFS_LANE_2, > .rx_lanes = UFS_LANE_2, > .hs_rx_gear = UFS_HS_G3, > @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) > .desired_working_mode = UFS_HS_MODE, > }; > } > -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); > +EXPORT_SYMBOL_GPL(ufshcd_init_host_param); > > /** > * ufshcd_pltfrm_init - probe routine of the driver > diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h > index a86a3ad..2d4d047 100644 > --- a/drivers/ufs/host/ufshcd-pltfrm.h > +++ b/drivers/ufs/host/ufshcd-pltfrm.h > @@ -10,7 +10,7 @@ > #define UFS_PWM_MODE 1 > #define UFS_HS_MODE 2 > > -struct ufs_dev_params { > +struct ufs_host_params { > u32 pwm_rx_gear; /* pwm rx gear to work in */ > u32 pwm_tx_gear; /* pwm tx gear to work in */ > u32 hs_rx_gear; /* hs rx gear to work in */ > @@ -25,10 +25,10 @@ struct ufs_dev_params { > u32 desired_working_mode; > }; > > -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, > - const struct ufs_pa_layer_attr *dev_max, > - struct ufs_pa_layer_attr *agreed_pwr); > -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); > +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, > + const struct ufs_pa_layer_attr *dev_max, > + struct ufs_pa_layer_attr *agreed_pwr); > +void ufshcd_init_host_param(struct ufs_host_params *host_param); > int ufshcd_pltfrm_init(struct platform_device *pdev, > const struct ufs_hba_variant_ops *vops); > int ufshcd_populate_vreg(struct device *dev, const char *name, > -- > 2.7.4 >
On 11/23/2023 2:16 PM, Can Guo wrote: > Structure ufs_dev_params is actually used in UFS host vendor drivers to > declare host specific power mode parameters, like ufs_<vendor>_params or > host_cap, which makes the code not very straightforward to read. Rename the > structure ufs_dev_params to ufs_host_params and unify the declarations in > all vendor drivers to host_params. > > In addition, rename the two functions ufshcd_init_pwr_dev_param() and > ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to > ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to > avoid confusions. > > This change does not change any functionalities or logic. > > Acked-by: Andrew Halaney <ahalaney@redhat.com> > Signed-off-by: Can Guo <quic_cang@quicinc.com> > --- > drivers/ufs/host/ufs-exynos.c | 7 ++-- > drivers/ufs/host/ufs-hisi.c | 11 +++---- > drivers/ufs/host/ufs-mediatek.c | 12 +++---- > drivers/ufs/host/ufs-qcom.c | 12 +++---- > drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- > drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- > 6 files changed, 57 insertions(+), 64 deletions(-) > > diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c > index 71bd6db..674f2f4 100644 > --- a/drivers/ufs/host/ufs-exynos.c > +++ b/drivers/ufs/host/ufs-exynos.c > @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, > { > struct exynos_ufs *ufs = ufshcd_get_variant(hba); > struct phy *generic_phy = ufs->phy; > - struct ufs_dev_params ufs_exynos_cap; > + struct ufs_host_params host_params; > int ret; > > if (!dev_req_params) { > @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, > goto out; > } > > - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); > + ufshcd_init_host_param(&host_params); > > - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, > - dev_max_params, dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > pr_err("%s: failed to determine capabilities\n", __func__); > goto out; > diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c > index 0229ac0..bb0c9a7 100644 > --- a/drivers/ufs/host/ufs-hisi.c > +++ b/drivers/ufs/host/ufs-hisi.c > @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, > return err; > } > > -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) > +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) > { > - ufshcd_init_pwr_dev_param(hisi_param); > + ufshcd_init_host_param(host_params); > } > > static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) > @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_max_params, > struct ufs_pa_layer_attr *dev_req_params) > { > - struct ufs_dev_params ufs_hisi_cap; > + struct ufs_host_params host_params; > int ret = 0; > > if (!dev_req_params) { > @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, > > switch (status) { > case PRE_CHANGE: > - ufs_hisi_set_dev_cap(&ufs_hisi_cap); > - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, > - dev_max_params, dev_req_params); > + ufs_hisi_set_dev_cap(&host_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > dev_err(hba->dev, > "%s: failed to determine capabilities\n", __func__); > diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c > index fc61790..016067d 100644 > --- a/drivers/ufs/host/ufs-mediatek.c > +++ b/drivers/ufs/host/ufs-mediatek.c > @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_req_params) > { > struct ufs_mtk_host *host = ufshcd_get_variant(hba); > - struct ufs_dev_params host_cap; > + struct ufs_host_params host_params; > int ret; > > - ufshcd_init_pwr_dev_param(&host_cap); > - host_cap.hs_rx_gear = UFS_HS_G5; > - host_cap.hs_tx_gear = UFS_HS_G5; > + ufshcd_init_host_param(&host_params); > + host_params.hs_rx_gear = UFS_HS_G5; > + host_params.hs_tx_gear = UFS_HS_G5; > > - ret = ufshcd_get_pwr_dev_param(&host_cap, > - dev_max_params, > - dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > pr_info("%s: failed to determine capabilities\n", > __func__); > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c > index 96cb8b5..aee66a3 100644 > --- a/drivers/ufs/host/ufs-qcom.c > +++ b/drivers/ufs/host/ufs-qcom.c > @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, > struct ufs_pa_layer_attr *dev_req_params) > { > struct ufs_qcom_host *host = ufshcd_get_variant(hba); > - struct ufs_dev_params ufs_qcom_cap; > + struct ufs_host_params host_params; > int ret = 0; > > if (!dev_req_params) { > @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, > > switch (status) { > case PRE_CHANGE: > - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); > - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; > + ufshcd_init_host_param(&host_params); > + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; > > /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ > - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); > + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); > > - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, > - dev_max_params, > - dev_req_params); > + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); > if (ret) { > dev_err(hba->dev, "%s: failed to determine capabilities\n", > __func__); > diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c > index da2558e..9ec11b9 100644 > --- a/drivers/ufs/host/ufshcd-pltfrm.c > +++ b/drivers/ufs/host/ufshcd-pltfrm.c > @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) > } > > /** > - * ufshcd_get_pwr_dev_param - get finally agreed attributes for > - * power mode change > - * @pltfrm_param: pointer to platform parameters > + * ufshcd_negotiate_pwr_param - find power mode settings that are supported by > + both the controller and the device > + * @host_param: pointer to host parameters > * @dev_max: pointer to device attributes > * @agreed_pwr: returned agreed attributes > * > * Return: 0 on success, non-zero value on failure. > */ > -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > - const struct ufs_pa_layer_attr *dev_max, > - struct ufs_pa_layer_attr *agreed_pwr) > +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, > + const struct ufs_pa_layer_attr *dev_max, > + struct ufs_pa_layer_attr *agreed_pwr) > { > - int min_pltfrm_gear; > + int min_host_gear; > int min_dev_gear; > bool is_dev_sup_hs = false; > - bool is_pltfrm_max_hs = false; > + bool is_host_max_hs = false; > > if (dev_max->pwr_rx == FAST_MODE) > is_dev_sup_hs = true; > > - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { > - is_pltfrm_max_hs = true; > - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, > - pltfrm_param->hs_tx_gear); > + if (host_param->desired_working_mode == UFS_HS_MODE) { > + is_host_max_hs = true; > + min_host_gear = min_t(u32, host_param->hs_rx_gear, > + host_param->hs_tx_gear); > } else { > - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, > - pltfrm_param->pwm_tx_gear); > + min_host_gear = min_t(u32, host_param->pwm_rx_gear, > + host_param->pwm_tx_gear); > } > > /* > - * device doesn't support HS but > - * pltfrm_param->desired_working_mode is HS, > - * thus device and pltfrm_param don't agree > + * device doesn't support HS but host_param->desired_working_mode is HS, > + * thus device and host_param don't agree > */ > - if (!is_dev_sup_hs && is_pltfrm_max_hs) { > + if (!is_dev_sup_hs && is_host_max_hs) { > pr_info("%s: device doesn't support HS\n", > __func__); > return -ENOTSUPP; > - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { > + } else if (is_dev_sup_hs && is_host_max_hs) { > /* > * since device supports HS, it supports FAST_MODE. > - * since pltfrm_param->desired_working_mode is also HS > + * since host_param->desired_working_mode is also HS > * then final decision (FAST/FASTAUTO) is done according > * to pltfrm_params as it is the restricting factor > */ > - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; > + agreed_pwr->pwr_rx = host_param->rx_pwr_hs; > agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; > } else { > /* > - * here pltfrm_param->desired_working_mode is PWM. > + * here host_param->desired_working_mode is PWM. > * it doesn't matter whether device supports HS or PWM, > - * in both cases pltfrm_param->desired_working_mode will > + * in both cases host_param->desired_working_mode will > * determine the mode > */ > - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; > + agreed_pwr->pwr_rx = host_param->rx_pwr_pwm; > agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; > } > > @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > * the same decision will be made for rx > */ > agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, > - pltfrm_param->tx_lanes); > + host_param->tx_lanes); > agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, > - pltfrm_param->rx_lanes); > + host_param->rx_lanes); > > /* device maximum gear is the minimum between device rx and tx gears */ > min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); > @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, > * what is the gear, as it is the one that also decided previously what > * pwr the device will be configured to. > */ > - if ((is_dev_sup_hs && is_pltfrm_max_hs) || > - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { > + if ((is_dev_sup_hs && is_host_max_hs) || > + (!is_dev_sup_hs && !is_host_max_hs)) { > agreed_pwr->gear_rx = > - min_t(u32, min_dev_gear, min_pltfrm_gear); > + min_t(u32, min_dev_gear, min_host_gear); > } else if (!is_dev_sup_hs) { > agreed_pwr->gear_rx = min_dev_gear; > } else { > - agreed_pwr->gear_rx = min_pltfrm_gear; > + agreed_pwr->gear_rx = min_host_gear; > } > agreed_pwr->gear_tx = agreed_pwr->gear_rx; > > - agreed_pwr->hs_rate = pltfrm_param->hs_rate; > + agreed_pwr->hs_rate = host_param->hs_rate; > > return 0; > } > -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); > +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_param); > > -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) > +void ufshcd_init_host_param(struct ufs_host_params *host_param) > { > - *dev_param = (struct ufs_dev_params){ > + *host_param = (struct ufs_host_params){ > .tx_lanes = UFS_LANE_2, > .rx_lanes = UFS_LANE_2, > .hs_rx_gear = UFS_HS_G3, > @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) > .desired_working_mode = UFS_HS_MODE, > }; > } > -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); > +EXPORT_SYMBOL_GPL(ufshcd_init_host_param); > > /** > * ufshcd_pltfrm_init - probe routine of the driver > diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h > index a86a3ad..2d4d047 100644 > --- a/drivers/ufs/host/ufshcd-pltfrm.h > +++ b/drivers/ufs/host/ufshcd-pltfrm.h > @@ -10,7 +10,7 @@ > #define UFS_PWM_MODE 1 > #define UFS_HS_MODE 2 > > -struct ufs_dev_params { > +struct ufs_host_params { > u32 pwm_rx_gear; /* pwm rx gear to work in */ > u32 pwm_tx_gear; /* pwm tx gear to work in */ > u32 hs_rx_gear; /* hs rx gear to work in */ > @@ -25,10 +25,10 @@ struct ufs_dev_params { > u32 desired_working_mode; > }; > > -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, > - const struct ufs_pa_layer_attr *dev_max, > - struct ufs_pa_layer_attr *agreed_pwr); > -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); > +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, > + const struct ufs_pa_layer_attr *dev_max, > + struct ufs_pa_layer_attr *agreed_pwr); > +void ufshcd_init_host_param(struct ufs_host_params *host_param); > int ufshcd_pltfrm_init(struct platform_device *pdev, > const struct ufs_hba_variant_ops *vops); > int ufshcd_populate_vreg(struct device *dev, const char *name, Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
On Tue, Nov 28, 2023 at 10:49:36AM +0530, Manivannan Sadhasivam wrote: > On Thu, Nov 23, 2023 at 12:46:21AM -0800, Can Guo wrote: > > Structure ufs_dev_params is actually used in UFS host vendor drivers to > > declare host specific power mode parameters, like ufs_<vendor>_params or > > host_cap, which makes the code not very straightforward to read. Rename the > > structure ufs_dev_params to ufs_host_params and unify the declarations in > > all vendor drivers to host_params. > > > > In addition, rename the two functions ufshcd_init_pwr_dev_param() and > > ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to > > ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to > > avoid confusions. > > > > This change does not change any functionalities or logic. > > > > Acked-by: Andrew Halaney <ahalaney@redhat.com> > > Signed-off-by: Can Guo <quic_cang@quicinc.com> > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > - Mani > > > --- > > drivers/ufs/host/ufs-exynos.c | 7 ++-- > > drivers/ufs/host/ufs-hisi.c | 11 +++---- > > drivers/ufs/host/ufs-mediatek.c | 12 +++---- > > drivers/ufs/host/ufs-qcom.c | 12 +++---- > > drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- > > drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- > > 6 files changed, 57 insertions(+), 64 deletions(-) > > [...] > > diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h > > index a86a3ad..2d4d047 100644 > > --- a/drivers/ufs/host/ufshcd-pltfrm.h > > +++ b/drivers/ufs/host/ufshcd-pltfrm.h > > @@ -10,7 +10,7 @@ > > #define UFS_PWM_MODE 1 > > #define UFS_HS_MODE 2 > > > > -struct ufs_dev_params { > > +struct ufs_host_params { > > u32 pwm_rx_gear; /* pwm rx gear to work in */ > > u32 pwm_tx_gear; /* pwm tx gear to work in */ > > u32 hs_rx_gear; /* hs rx gear to work in */ > > @@ -25,10 +25,10 @@ struct ufs_dev_params { > > u32 desired_working_mode; > > }; > > > > -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, > > - const struct ufs_pa_layer_attr *dev_max, > > - struct ufs_pa_layer_attr *agreed_pwr); > > -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); > > +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, > > + const struct ufs_pa_layer_attr *dev_max, > > + struct ufs_pa_layer_attr *agreed_pwr); > > +void ufshcd_init_host_param(struct ufs_host_params *host_param); Noticed this after giving my R-b tag. Could you please rename the functions to: int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params,... void ufshcd_init_host_params(struct ufs_host_params *host_params); Not a big deal, but since the argument passed to both functions are 'params', it'd be good if the function definition also use the same plural form. - Mani
On 11/28/2023 1:31 PM, Manivannan Sadhasivam wrote: > On Tue, Nov 28, 2023 at 10:49:36AM +0530, Manivannan Sadhasivam wrote: >> On Thu, Nov 23, 2023 at 12:46:21AM -0800, Can Guo wrote: >>> Structure ufs_dev_params is actually used in UFS host vendor drivers to >>> declare host specific power mode parameters, like ufs_<vendor>_params or >>> host_cap, which makes the code not very straightforward to read. Rename the >>> structure ufs_dev_params to ufs_host_params and unify the declarations in >>> all vendor drivers to host_params. >>> >>> In addition, rename the two functions ufshcd_init_pwr_dev_param() and >>> ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to >>> ufshcd_init_host_param() and ufshcd_negotiate_pwr_param() respectively to >>> avoid confusions. >>> >>> This change does not change any functionalities or logic. >>> >>> Acked-by: Andrew Halaney <ahalaney@redhat.com> >>> Signed-off-by: Can Guo <quic_cang@quicinc.com> >> >> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> >> >> - Mani >> >>> --- >>> drivers/ufs/host/ufs-exynos.c | 7 ++-- >>> drivers/ufs/host/ufs-hisi.c | 11 +++---- >>> drivers/ufs/host/ufs-mediatek.c | 12 +++---- >>> drivers/ufs/host/ufs-qcom.c | 12 +++---- >>> drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- >>> drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- >>> 6 files changed, 57 insertions(+), 64 deletions(-) >>> > > [...] > >>> diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h >>> index a86a3ad..2d4d047 100644 >>> --- a/drivers/ufs/host/ufshcd-pltfrm.h >>> +++ b/drivers/ufs/host/ufshcd-pltfrm.h >>> @@ -10,7 +10,7 @@ >>> #define UFS_PWM_MODE 1 >>> #define UFS_HS_MODE 2 >>> >>> -struct ufs_dev_params { >>> +struct ufs_host_params { >>> u32 pwm_rx_gear; /* pwm rx gear to work in */ >>> u32 pwm_tx_gear; /* pwm tx gear to work in */ >>> u32 hs_rx_gear; /* hs rx gear to work in */ >>> @@ -25,10 +25,10 @@ struct ufs_dev_params { >>> u32 desired_working_mode; >>> }; >>> >>> -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, >>> - const struct ufs_pa_layer_attr *dev_max, >>> - struct ufs_pa_layer_attr *agreed_pwr); >>> -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); >>> +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, >>> + const struct ufs_pa_layer_attr *dev_max, >>> + struct ufs_pa_layer_attr *agreed_pwr); >>> +void ufshcd_init_host_param(struct ufs_host_params *host_param); > > Noticed this after giving my R-b tag. Could you please rename the functions to: > > int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params,... > void ufshcd_init_host_params(struct ufs_host_params *host_params); > > Not a big deal, but since the argument passed to both functions are 'params', > it'd be good if the function definition also use the same plural form. > No worries, will do in next version. Thanks, Can Guo. > - Mani >
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c index 71bd6db..674f2f4 100644 --- a/drivers/ufs/host/ufs-exynos.c +++ b/drivers/ufs/host/ufs-exynos.c @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, { struct exynos_ufs *ufs = ufshcd_get_variant(hba); struct phy *generic_phy = ufs->phy; - struct ufs_dev_params ufs_exynos_cap; + struct ufs_host_params host_params; int ret; if (!dev_req_params) { @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, goto out; } - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); + ufshcd_init_host_param(&host_params); - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, - dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); if (ret) { pr_err("%s: failed to determine capabilities\n", __func__); goto out; diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c index 0229ac0..bb0c9a7 100644 --- a/drivers/ufs/host/ufs-hisi.c +++ b/drivers/ufs/host/ufs-hisi.c @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, return err; } -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) { - ufshcd_init_pwr_dev_param(hisi_param); + ufshcd_init_host_param(host_params); } static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { - struct ufs_dev_params ufs_hisi_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufs_hisi_set_dev_cap(&ufs_hisi_cap); - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, - dev_max_params, dev_req_params); + ufs_hisi_set_dev_cap(&host_params); + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c index fc61790..016067d 100644 --- a/drivers/ufs/host/ufs-mediatek.c +++ b/drivers/ufs/host/ufs-mediatek.c @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_mtk_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params host_cap; + struct ufs_host_params host_params; int ret; - ufshcd_init_pwr_dev_param(&host_cap); - host_cap.hs_rx_gear = UFS_HS_G5; - host_cap.hs_tx_gear = UFS_HS_G5; + ufshcd_init_host_param(&host_params); + host_params.hs_rx_gear = UFS_HS_G5; + host_params.hs_tx_gear = UFS_HS_G5; - ret = ufshcd_get_pwr_dev_param(&host_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); if (ret) { pr_info("%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 96cb8b5..aee66a3 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params ufs_qcom_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufshcd_init_host_param(&host_params); + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c index da2558e..9ec11b9 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.c +++ b/drivers/ufs/host/ufshcd-pltfrm.c @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) } /** - * ufshcd_get_pwr_dev_param - get finally agreed attributes for - * power mode change - * @pltfrm_param: pointer to platform parameters + * ufshcd_negotiate_pwr_param - find power mode settings that are supported by + both the controller and the device + * @host_param: pointer to host parameters * @dev_max: pointer to device attributes * @agreed_pwr: returned agreed attributes * * Return: 0 on success, non-zero value on failure. */ -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr) +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) { - int min_pltfrm_gear; + int min_host_gear; int min_dev_gear; bool is_dev_sup_hs = false; - bool is_pltfrm_max_hs = false; + bool is_host_max_hs = false; if (dev_max->pwr_rx == FAST_MODE) is_dev_sup_hs = true; - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { - is_pltfrm_max_hs = true; - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, - pltfrm_param->hs_tx_gear); + if (host_param->desired_working_mode == UFS_HS_MODE) { + is_host_max_hs = true; + min_host_gear = min_t(u32, host_param->hs_rx_gear, + host_param->hs_tx_gear); } else { - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, - pltfrm_param->pwm_tx_gear); + min_host_gear = min_t(u32, host_param->pwm_rx_gear, + host_param->pwm_tx_gear); } /* - * device doesn't support HS but - * pltfrm_param->desired_working_mode is HS, - * thus device and pltfrm_param don't agree + * device doesn't support HS but host_param->desired_working_mode is HS, + * thus device and host_param don't agree */ - if (!is_dev_sup_hs && is_pltfrm_max_hs) { + if (!is_dev_sup_hs && is_host_max_hs) { pr_info("%s: device doesn't support HS\n", __func__); return -ENOTSUPP; - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { + } else if (is_dev_sup_hs && is_host_max_hs) { /* * since device supports HS, it supports FAST_MODE. - * since pltfrm_param->desired_working_mode is also HS + * since host_param->desired_working_mode is also HS * then final decision (FAST/FASTAUTO) is done according * to pltfrm_params as it is the restricting factor */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; + agreed_pwr->pwr_rx = host_param->rx_pwr_hs; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } else { /* - * here pltfrm_param->desired_working_mode is PWM. + * here host_param->desired_working_mode is PWM. * it doesn't matter whether device supports HS or PWM, - * in both cases pltfrm_param->desired_working_mode will + * in both cases host_param->desired_working_mode will * determine the mode */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; + agreed_pwr->pwr_rx = host_param->rx_pwr_pwm; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * the same decision will be made for rx */ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, - pltfrm_param->tx_lanes); + host_param->tx_lanes); agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, - pltfrm_param->rx_lanes); + host_param->rx_lanes); /* device maximum gear is the minimum between device rx and tx gears */ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * what is the gear, as it is the one that also decided previously what * pwr the device will be configured to. */ - if ((is_dev_sup_hs && is_pltfrm_max_hs) || - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { + if ((is_dev_sup_hs && is_host_max_hs) || + (!is_dev_sup_hs && !is_host_max_hs)) { agreed_pwr->gear_rx = - min_t(u32, min_dev_gear, min_pltfrm_gear); + min_t(u32, min_dev_gear, min_host_gear); } else if (!is_dev_sup_hs) { agreed_pwr->gear_rx = min_dev_gear; } else { - agreed_pwr->gear_rx = min_pltfrm_gear; + agreed_pwr->gear_rx = min_host_gear; } agreed_pwr->gear_tx = agreed_pwr->gear_rx; - agreed_pwr->hs_rate = pltfrm_param->hs_rate; + agreed_pwr->hs_rate = host_param->hs_rate; return 0; } -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_param); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) +void ufshcd_init_host_param(struct ufs_host_params *host_param) { - *dev_param = (struct ufs_dev_params){ + *host_param = (struct ufs_host_params){ .tx_lanes = UFS_LANE_2, .rx_lanes = UFS_LANE_2, .hs_rx_gear = UFS_HS_G3, @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) .desired_working_mode = UFS_HS_MODE, }; } -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_init_host_param); /** * ufshcd_pltfrm_init - probe routine of the driver diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h index a86a3ad..2d4d047 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.h +++ b/drivers/ufs/host/ufshcd-pltfrm.h @@ -10,7 +10,7 @@ #define UFS_PWM_MODE 1 #define UFS_HS_MODE 2 -struct ufs_dev_params { +struct ufs_host_params { u32 pwm_rx_gear; /* pwm rx gear to work in */ u32 pwm_tx_gear; /* pwm tx gear to work in */ u32 hs_rx_gear; /* hs rx gear to work in */ @@ -25,10 +25,10 @@ struct ufs_dev_params { u32 desired_working_mode; }; -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); +int ufshcd_negotiate_pwr_param(const struct ufs_host_params *host_param, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr); +void ufshcd_init_host_param(struct ufs_host_params *host_param); int ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops); int ufshcd_populate_vreg(struct device *dev, const char *name,