| Message ID | 20231110054738.23515-4-stanley_chang@realtek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/4] phy: core: add notify_connect and notify_disconnect callback | expand |
Hi Greg, Please help review this patch. Thanks, Stanley > -----Original Message----- > From: Stanley Chang <stanley_chang@realtek.com> > Sent: Friday, November 10, 2023 1:45 PM > To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Cc: Stanley Chang[昌育德] <stanley_chang@realtek.com>; Vinod Koul > <vkoul@kernel.org>; Johan Hovold <johan@kernel.org>; Kishon Vijay Abraham > I <kishon@kernel.org>; Geert Uytterhoeven <geert+renesas@glider.be>; Rob > Herring <robh@kernel.org>; Jinjie Ruan <ruanjinjie@huawei.com>; Alan Stern > <stern@rowland.harvard.edu>; Yang Yingliang <yangyingliang@huawei.com>; > Ricardo Cañuelo <ricardo.canuelo@collabora.com>; Roy Luo > <royluo@google.com>; Heikki Krogerus <heikki.krogerus@linux.intel.com>; > linux-kernel@vger.kernel.org; linux-phy@lists.infradead.org; > linux-usb@vger.kernel.org > Subject: [PATCH v3 4/4] usb: core: add phy notify connect and disconnect > > In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning > base on port status. Therefore, add a notify callback of generic phy driver > when usb device connect and disconnect change. > > The Realtek phy driver is designed to dynamically adjust disconnection level > and calibrate phy parameters. When the device connected bit changes and > when the disconnected bit changes, do connection change notification: > > Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is > USB_PORT_STAT_C_CONNECTION. > 1. The device is connected, the driver lowers the disconnection level and > calibrates the phy parameters. > 2. The device disconnects, the driver increases the disconnect level and > calibrates the phy parameters. > > Generic phy driver in usb core framework does not support device connect and > disconnect notifications. Therefore, we add an api to notify phy the connection > changes. > > Additionally, the generic phy only specifies primary_hcd in the original design. > Added specific "usb2-phy" on primary_hcd and "usb3-phy" on shared_hcd. > > Signed-off-by: Stanley Chang <stanley_chang@realtek.com> > --- > v1 to v2 change: > rebase the driver to remove the part of usb phy notify API > v2 to v3: > No change > --- > drivers/usb/core/hcd.c | 14 +++++-- > drivers/usb/core/hub.c | 29 +++++++++++++ drivers/usb/core/phy.c | 94 > ++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/core/phy.h | 3 ++ > 4 files changed, 136 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index > 12b6dfeaf658..992284461ad8 100644 > --- a/drivers/usb/core/hcd.c > +++ b/drivers/usb/core/hcd.c > @@ -2794,10 +2794,16 @@ int usb_add_hcd(struct usb_hcd *hcd, > struct usb_device *rhdev; > struct usb_hcd *shared_hcd; > > - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { > - hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); > - if (IS_ERR(hcd->phy_roothub)) > - return PTR_ERR(hcd->phy_roothub); > + if (!hcd->skip_phy_initialization) { > + if (usb_hcd_is_primary_hcd(hcd)) { > + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); > + if (IS_ERR(hcd->phy_roothub)) > + return PTR_ERR(hcd->phy_roothub); > + } else { > + hcd->phy_roothub = > usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev); > + if (IS_ERR(hcd->phy_roothub)) > + return PTR_ERR(hcd->phy_roothub); > + } > > retval = usb_phy_roothub_init(hcd->phy_roothub); > if (retval) > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index > 87480a6e6d93..65c0454ee70a 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -37,6 +37,7 @@ > #include <asm/byteorder.h> > > #include "hub.h" > +#include "phy.h" > #include "otg_productlist.h" > > #define USB_VENDOR_GENESYS_LOGIC 0x05e3 > @@ -622,6 +623,34 @@ static int hub_ext_port_status(struct usb_hub *hub, > int port1, int type, > ret = 0; > } > mutex_unlock(&hub->status_mutex); > + > + /* > + * There is no need to lock status_mutex here, because status_mutex > + * protects hub->status, and the phy driver only checks the port > + * status without changing the status. > + */ > + if (!ret) { > + struct usb_device *hdev = hub->hdev; > + > + /* > + * Only roothub will be notified of connection changes, > + * since the USB PHY only cares about changes at the next > + * level. > + */ > + if (is_root_hub(hdev)) { > + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); > + bool connect; > + bool connect_change; > + > + connect_change = *change & > USB_PORT_STAT_C_CONNECTION; > + connect = *status & USB_PORT_STAT_CONNECTION; > + if (connect_change && connect) > + usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 > - 1); > + else if (connect_change) > + usb_phy_roothub_notify_disconnect(hcd->phy_roothub, > port1 - 1); > + } > + } > + > return ret; > } > > diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index > fb1588e7c282..26585fc1ec32 100644 > --- a/drivers/usb/core/phy.c > +++ b/drivers/usb/core/phy.c > @@ -19,6 +19,29 @@ struct usb_phy_roothub { > struct list_head list; > }; > > +static int usb_phy_roothub_add_phy_by_name(struct device *dev, const char > *name, > + struct list_head *list) > +{ > + struct usb_phy_roothub *roothub_entry; > + struct phy *phy; > + > + phy = devm_of_phy_get(dev, dev->of_node, name); > + if (IS_ERR(phy)) > + return PTR_ERR(phy); > + > + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); > + if (!roothub_entry) > + return -ENOMEM; > + > + INIT_LIST_HEAD(&roothub_entry->list); > + > + roothub_entry->phy = phy; > + > + list_add_tail(&roothub_entry->list, list); > + > + return 0; > +} > + > static int usb_phy_roothub_add_phy(struct device *dev, int index, > struct list_head *list) > { > @@ -65,6 +88,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct > device *dev) > > INIT_LIST_HEAD(&phy_roothub->list); > > + if (!usb_phy_roothub_add_phy_by_name(dev, "usb2-phy", > &phy_roothub->list)) > + return phy_roothub; > + > for (i = 0; i < num_phys; i++) { > err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); > if (err) > @@ -75,6 +101,32 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct > device *dev) } EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); > > +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device > +*dev) { > + struct usb_phy_roothub *phy_roothub; > + int num_phys; > + > + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) > + return NULL; > + > + num_phys = of_count_phandle_with_args(dev->of_node, "phys", > + "#phy-cells"); > + if (num_phys <= 0) > + return NULL; > + > + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); > + if (!phy_roothub) > + return ERR_PTR(-ENOMEM); > + > + INIT_LIST_HEAD(&phy_roothub->list); > + > + if (!usb_phy_roothub_add_phy_by_name(dev, "usb3-phy", > &phy_roothub->list)) > + return phy_roothub; > + > + return NULL; > +} > +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc_usb3_phy); > + > int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) { > struct usb_phy_roothub *roothub_entry; @@ -172,6 +224,48 @@ int > usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) } > EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); > > +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, > +int port) { > + struct usb_phy_roothub *roothub_entry; > + struct list_head *head; > + int err; > + > + if (!phy_roothub) > + return 0; > + > + head = &phy_roothub->list; > + > + list_for_each_entry(roothub_entry, head, list) { > + err = phy_notify_connect(roothub_entry->phy, port); > + if (err) > + return err; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_connect); > + > +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub > +*phy_roothub, int port) { > + struct usb_phy_roothub *roothub_entry; > + struct list_head *head; > + int err; > + > + if (!phy_roothub) > + return 0; > + > + head = &phy_roothub->list; > + > + list_for_each_entry(roothub_entry, head, list) { > + err = phy_notify_disconnect(roothub_entry->phy, port); > + if (err) > + return err; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_disconnect); > + > int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) { > struct usb_phy_roothub *roothub_entry; diff --git a/drivers/usb/core/phy.h > b/drivers/usb/core/phy.h index 20a267cd986b..88b49c0ea6b5 100644 > --- a/drivers/usb/core/phy.h > +++ b/drivers/usb/core/phy.h > @@ -12,6 +12,7 @@ struct device; > struct usb_phy_roothub; > > struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); > +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device > +*dev); > > int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); int > usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); @@ -19,6 +20,8 > @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int > usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, > enum phy_mode mode); > int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); > +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, > +int port); int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub > +*phy_roothub, int port); > int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); > void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); > > -- > 2.34.1
On Thu, Dec 07, 2023 at 04:50:10AM +0000, Stanley Chang[昌育德] wrote: > Hi Greg, > > Please help review this patch. This series is gone from my tree as others reviewed it and asked for changes. If you think those changes are not needed, feel free to resend it with an explanation of why that is so. thanks, greg k-h
Hi Greg, Okay. I will resubmit these patches. Thanks, Stanley > -----Original Message----- > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Sent: Thursday, December 7, 2023 3:11 PM > To: Stanley Chang[昌育德] <stanley_chang@realtek.com> > Cc: Vinod Koul <vkoul@kernel.org>; Johan Hovold <johan@kernel.org>; Kishon > Vijay Abraham I <kishon@kernel.org>; Geert Uytterhoeven > <geert+renesas@glider.be>; Rob Herring <robh@kernel.org>; Jinjie Ruan > <ruanjinjie@huawei.com>; Alan Stern <stern@rowland.harvard.edu>; Yang > Yingliang <yangyingliang@huawei.com>; Ricardo Cañuelo > <ricardo.canuelo@collabora.com>; Roy Luo <royluo@google.com>; Heikki > Krogerus <heikki.krogerus@linux.intel.com>; linux-kernel@vger.kernel.org; > linux-phy@lists.infradead.org; linux-usb@vger.kernel.org > Subject: Re: [PATCH v3 4/4] usb: core: add phy notify connect and disconnect > > > External mail. > > > > On Thu, Dec 07, 2023 at 04:50:10AM +0000, Stanley Chang[昌育德] wrote: > > Hi Greg, > > > > Please help review this patch. > > This series is gone from my tree as others reviewed it and asked for changes. > If you think those changes are not needed, feel free to resend it with an > explanation of why that is so. > > thanks, > > greg k-h
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 12b6dfeaf658..992284461ad8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2794,10 +2794,16 @@ int usb_add_hcd(struct usb_hcd *hcd, struct usb_device *rhdev; struct usb_hcd *shared_hcd; - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { - hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); - if (IS_ERR(hcd->phy_roothub)) - return PTR_ERR(hcd->phy_roothub); + if (!hcd->skip_phy_initialization) { + if (usb_hcd_is_primary_hcd(hcd)) { + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } else { + hcd->phy_roothub = usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } retval = usb_phy_roothub_init(hcd->phy_roothub); if (retval) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 87480a6e6d93..65c0454ee70a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -37,6 +37,7 @@ #include <asm/byteorder.h> #include "hub.h" +#include "phy.h" #include "otg_productlist.h" #define USB_VENDOR_GENESYS_LOGIC 0x05e3 @@ -622,6 +623,34 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); + + /* + * There is no need to lock status_mutex here, because status_mutex + * protects hub->status, and the phy driver only checks the port + * status without changing the status. + */ + if (!ret) { + struct usb_device *hdev = hub->hdev; + + /* + * Only roothub will be notified of connection changes, + * since the USB PHY only cares about changes at the next + * level. + */ + if (is_root_hub(hdev)) { + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + bool connect; + bool connect_change; + + connect_change = *change & USB_PORT_STAT_C_CONNECTION; + connect = *status & USB_PORT_STAT_CONNECTION; + if (connect_change && connect) + usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 - 1); + else if (connect_change) + usb_phy_roothub_notify_disconnect(hcd->phy_roothub, port1 - 1); + } + } + return ret; } diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index fb1588e7c282..26585fc1ec32 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -19,6 +19,29 @@ struct usb_phy_roothub { struct list_head list; }; +static int usb_phy_roothub_add_phy_by_name(struct device *dev, const char *name, + struct list_head *list) +{ + struct usb_phy_roothub *roothub_entry; + struct phy *phy; + + phy = devm_of_phy_get(dev, dev->of_node, name); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); + if (!roothub_entry) + return -ENOMEM; + + INIT_LIST_HEAD(&roothub_entry->list); + + roothub_entry->phy = phy; + + list_add_tail(&roothub_entry->list, list); + + return 0; +} + static int usb_phy_roothub_add_phy(struct device *dev, int index, struct list_head *list) { @@ -65,6 +88,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) INIT_LIST_HEAD(&phy_roothub->list); + if (!usb_phy_roothub_add_phy_by_name(dev, "usb2-phy", &phy_roothub->list)) + return phy_roothub; + for (i = 0; i < num_phys; i++) { err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); if (err) @@ -75,6 +101,32 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) } EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev) +{ + struct usb_phy_roothub *phy_roothub; + int num_phys; + + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) + return NULL; + + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + if (num_phys <= 0) + return NULL; + + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); + if (!phy_roothub) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&phy_roothub->list); + + if (!usb_phy_roothub_add_phy_by_name(dev, "usb3-phy", &phy_roothub->list)) + return phy_roothub; + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc_usb3_phy); + int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; @@ -172,6 +224,48 @@ int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) } EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_connect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_connect); + +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_disconnect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_disconnect); + int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index 20a267cd986b..88b49c0ea6b5 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -12,6 +12,7 @@ struct device; struct usb_phy_roothub; struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev); int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); @@ -19,6 +20,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, enum phy_mode mode); int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port); +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);
In Realtek SoC, the parameter of usb phy is designed to can dynamic tuning base on port status. Therefore, add a notify callback of generic phy driver when usb device connect and disconnect change. The Realtek phy driver is designed to dynamically adjust disconnection level and calibrate phy parameters. When the device connected bit changes and when the disconnected bit changes, do connection change notification: Check if portstatus is USB_PORT_STAT_CONNECTION and portchange is USB_PORT_STAT_C_CONNECTION. 1. The device is connected, the driver lowers the disconnection level and calibrates the phy parameters. 2. The device disconnects, the driver increases the disconnect level and calibrates the phy parameters. Generic phy driver in usb core framework does not support device connect and disconnect notifications. Therefore, we add an api to notify phy the connection changes. Additionally, the generic phy only specifies primary_hcd in the original design. Added specific "usb2-phy" on primary_hcd and "usb3-phy" on shared_hcd. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> --- v1 to v2 change: rebase the driver to remove the part of usb phy notify API v2 to v3: No change --- drivers/usb/core/hcd.c | 14 +++++-- drivers/usb/core/hub.c | 29 +++++++++++++ drivers/usb/core/phy.c | 94 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/phy.h | 3 ++ 4 files changed, 136 insertions(+), 4 deletions(-)