| Message ID | 20231211070345.2792-1-mihai.sain@microchip.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: microchip: sama5d27_som1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node | expand |
On 11/12/2023 at 08:03, Mihai Sain wrote: > On board the sdmmc0 interface is wired to a SD Card socket. > According with mmc-controller bindings, the mmc-ddr-3_3v property > is used for eMMC devices to enable high-speed DDR mode (3.3V I/O). > Remove the mmc-ddr-3_3v property from sdmmc0 node. > > Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Fine with me: Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> > --- > arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > index d0a6dbd377df..f3ffb8f01d8a 100644 > --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > @@ -54,7 +54,6 @@ usb2: ehci@500000 { > > sdmmc0: sdio-host@a0000000 { > bus-width = <8>; > - mmc-ddr-3_3v; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_sdmmc0_default>; > status = "okay";
On 11.12.2023 09:03, Mihai Sain wrote: > On board the sdmmc0 interface is wired to a SD Card socket. > According with mmc-controller bindings, the mmc-ddr-3_3v property > is used for eMMC devices to enable high-speed DDR mode (3.3V I/O). > Remove the mmc-ddr-3_3v property from sdmmc0 node. > > Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Applied to at91-dt, thanks! > --- > arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > index d0a6dbd377df..f3ffb8f01d8a 100644 > --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts > @@ -54,7 +54,6 @@ usb2: ehci@500000 { > > sdmmc0: sdio-host@a0000000 { > bus-width = <8>; > - mmc-ddr-3_3v; > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_sdmmc0_default>; > status = "okay";
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index d0a6dbd377df..f3ffb8f01d8a 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -54,7 +54,6 @@ usb2: ehci@500000 { sdmmc0: sdio-host@a0000000 { bus-width = <8>; - mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay";
On board the sdmmc0 interface is wired to a SD Card socket. According with mmc-controller bindings, the mmc-ddr-3_3v property is used for eMMC devices to enable high-speed DDR mode (3.3V I/O). Remove the mmc-ddr-3_3v property from sdmmc0 node. Signed-off-by: Mihai Sain <mihai.sain@microchip.com> --- arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts | 1 - 1 file changed, 1 deletion(-)