| Message ID | 20231211192318.16450-3-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net-next,RFC,v2,1/4] dt-bindings: net: phy: Document new LEDs active-low property | expand |
On Mon, 11 Dec 2023 20:23:17 +0100, Christian Marangi wrote: > Add Documentation for QCA808x PHYs for the additional LED configuration > for this PHY. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v2: > - Fix License warning from checkpatch > - Drop redundant Description phrase > - Improve commit tile > - Drop special property (generalized) > > .../devicetree/bindings/net/qca,qca808x.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/qca,qca808x.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qca,qca808x.yaml: 'anyOf' conditional failed, one must be fixed: 'properties' is a required property 'patternProperties' is a required property hint: Metaschema for devicetree binding documentation from schema $id: http://devicetree.org/meta-schemas/core.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231211192318.16450-3-ansuelsmth@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Mon, Dec 11, 2023 at 02:42:08PM -0600, Rob Herring wrote: > > On Mon, 11 Dec 2023 20:23:17 +0100, Christian Marangi wrote: > > Add Documentation for QCA808x PHYs for the additional LED configuration > > for this PHY. > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > Changes v2: > > - Fix License warning from checkpatch > > - Drop redundant Description phrase > > - Improve commit tile > > - Drop special property (generalized) > > > > .../devicetree/bindings/net/qca,qca808x.yaml | 58 +++++++++++++++++++ > > 1 file changed, 58 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/qca,qca808x.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qca,qca808x.yaml: 'anyOf' conditional failed, one must be fixed: > 'properties' is a required property > 'patternProperties' is a required property > hint: Metaschema for devicetree binding documentation > from schema $id: http://devicetree.org/meta-schemas/core.yaml# > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231211192318.16450-3-ansuelsmth@gmail.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > Erm sorry for the bot error... But How to handle this?
On Mon, Dec 11, 2023 at 09:49:22PM +0100, Christian Marangi wrote: > On Mon, Dec 11, 2023 at 02:42:08PM -0600, Rob Herring wrote: > > > > On Mon, 11 Dec 2023 20:23:17 +0100, Christian Marangi wrote: > > > Add Documentation for QCA808x PHYs for the additional LED configuration > > > for this PHY. > > > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > > --- > > > Changes v2: > > > - Fix License warning from checkpatch > > > - Drop redundant Description phrase > > > - Improve commit tile > > > - Drop special property (generalized) > > > > > > .../devicetree/bindings/net/qca,qca808x.yaml | 58 +++++++++++++++++++ > > > 1 file changed, 58 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/net/qca,qca808x.yaml > > > > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/qca,qca808x.yaml: 'anyOf' conditional failed, one must be fixed: > > 'properties' is a required property > > 'patternProperties' is a required property > > hint: Metaschema for devicetree binding documentation > > from schema $id: http://devicetree.org/meta-schemas/core.yaml# > > > > doc reference errors (make refcheckdocs): > > > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231211192318.16450-3-ansuelsmth@gmail.com > > > > The base for the series is generally the latest rc1. A different dependency > > should be noted in *this* patch. > > > > If you already ran 'make dt_binding_check' and didn't see the above > > error(s), then make sure 'yamllint' is installed and dt-schema is up to > > date: > > > > pip3 install dtschema --upgrade > > > > Please check and re-submit after running the above command yourself. Note > > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > > your schema. However, it must be unset to test all examples with your schema. > > > > Erm sorry for the bot error... But How to handle this? You should define what the compatible must be under properties and drop 'select' (it will get generated). 'contains' in the select is generally not sufficient constraint though since ethernet-phy.yaml happens to limit compatible to 1 entry, it is in this case. Rob
diff --git a/Documentation/devicetree/bindings/net/qca,qca808x.yaml b/Documentation/devicetree/bindings/net/qca,qca808x.yaml new file mode 100644 index 000000000000..ec8b31324df5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/qca,qca808x.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/qca,qca808x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros QCA808X PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: + QCA808X PHYs can have up to 3 LEDs attached. + All 3 LEDs are disabled by default. + 2 LEDs have dedicated pins with the 3rd LED having the + double function of Interrupt LEDs/GPIO or additional LED. + + By default this special PIN is set to LED function. + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id004d.d101 + required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id004d.d101"; + reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; + }; + };
Add Documentation for QCA808x PHYs for the additional LED configuration for this PHY. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v2: - Fix License warning from checkpatch - Drop redundant Description phrase - Improve commit tile - Drop special property (generalized) .../devicetree/bindings/net/qca,qca808x.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/qca,qca808x.yaml