diff mbox series

[RFC,v3,07/21] ACPI: Rename acpi_processor_hotadd_init and remove pre-processor guards

Message ID E1rDOgN-00DvkE-D8@rmk-PC.armlinux.org.uk (mailing list archive)
State Handled Elsewhere
Headers show
Series ACPI/arm64: add support for virtual cpu hotplug | expand

Commit Message

Russell King (Oracle) Dec. 13, 2023, 12:49 p.m. UTC
From: James Morse <james.morse@arm.com>

acpi_processor_hotadd_init() will make a CPU present by mapping it
based on its hardware id.

'hotadd_init' is ambiguous once there are two different behaviours
for cpu hotplug. This is for toggling the _STA present bit. Subsequent
patches will add support for toggling the _STA enabled bit, named
acpi_processor_make_enabled().

Rename it acpi_processor_make_present() to make it clear this is
for CPUs that were not previously present.

Expose the function prototypes it uses to allow the preprocessor
guards to be removed. The IS_ENABLED() check will let the compiler
dead-code elimination pass remove this if it isn't going to be
used.

Signed-off-by: James Morse <james.morse@arm.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Jianyong Wu <jianyong.wu@arm.com>
---
Outstanding comments:
 https://lore.kernel.org/r/20230914151720.00007105@Huawei.com
 https://lore.kernel.org/r/b8f430c1-c30f-191f-18c6-f750fa6ba476@redhat.com
  For this comment, we use IS_ENABLED() in multiple places in the kernel in
  this way, and it isn't a problem.
---
 drivers/acpi/acpi_processor.c | 14 +++++---------
 include/linux/acpi.h          |  2 --
 2 files changed, 5 insertions(+), 11 deletions(-)

Comments

Jonathan Cameron Dec. 14, 2023, 5:43 p.m. UTC | #1
On Wed, 13 Dec 2023 12:49:47 +0000
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> wrote:

> From: James Morse <james.morse@arm.com>
> 
> acpi_processor_hotadd_init() will make a CPU present by mapping it
> based on its hardware id.
> 
> 'hotadd_init' is ambiguous once there are two different behaviours
> for cpu hotplug. This is for toggling the _STA present bit. Subsequent
> patches will add support for toggling the _STA enabled bit, named
> acpi_processor_make_enabled().
> 
> Rename it acpi_processor_make_present() to make it clear this is
> for CPUs that were not previously present.
> 
> Expose the function prototypes it uses to allow the preprocessor
> guards to be removed. The IS_ENABLED() check will let the compiler
> dead-code elimination pass remove this if it isn't going to be
> used.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Tested-by: Miguel Luis <miguel.luis@oracle.com>
> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
> Tested-by: Jianyong Wu <jianyong.wu@arm.com>
> ---
> Outstanding comments:
>  https://lore.kernel.org/r/20230914151720.00007105@Huawei.com

If it's not caused a build warning yet, chances are high this is fine.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

>  https://lore.kernel.org/r/b8f430c1-c30f-191f-18c6-f750fa6ba476@redhat.com
>   For this comment, we use IS_ENABLED() in multiple places in the kernel in
>   this way, and it isn't a problem.
> ---
>  drivers/acpi/acpi_processor.c | 14 +++++---------
>  include/linux/acpi.h          |  2 --
>  2 files changed, 5 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index c8e960ff0aca..26e3efb74614 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -183,13 +183,15 @@ static void __init acpi_pcc_cpufreq_init(void) {}
>  #endif /* CONFIG_X86 */
>  
>  /* Initialization */
> -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
> -static int acpi_processor_hotadd_init(struct acpi_processor *pr)
> +static int acpi_processor_make_present(struct acpi_processor *pr)
>  {
>  	unsigned long long sta;
>  	acpi_status status;
>  	int ret;
>  
> +	if (!IS_ENABLED(CONFIG_ACPI_HOTPLUG_PRESENT_CPU))
> +		return -ENODEV;
> +
>  	if (invalid_phys_cpuid(pr->phys_id))
>  		return -ENODEV;
>  
> @@ -223,12 +225,6 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
>  	cpu_maps_update_done();
>  	return ret;
>  }
> -#else
> -static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
> -{
> -	return -ENODEV;
> -}
> -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */
>  
>  static int acpi_processor_get_info(struct acpi_device *device)
>  {
> @@ -335,7 +331,7 @@ static int acpi_processor_get_info(struct acpi_device *device)
>  	 *  because cpuid <-> apicid mapping is persistent now.
>  	 */
>  	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
> -		int ret = acpi_processor_hotadd_init(pr);
> +		int ret = acpi_processor_make_present(pr);
>  
>  		if (ret)
>  			return ret;
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 36071bc11acd..19d009ca9e7a 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -301,12 +301,10 @@ static inline int acpi_processor_evaluate_cst(acpi_handle handle, u32 cpu,
>  }
>  #endif
>  
> -#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
>  /* Arch dependent functions for cpu hotplug support */
>  int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
>  		 int *pcpu);
>  int acpi_unmap_cpu(int cpu);
> -#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */
>  
>  #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
>  int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr);
Russell King (Oracle) Dec. 14, 2023, 6:03 p.m. UTC | #2
On Thu, Dec 14, 2023 at 05:43:37PM +0000, Jonathan Cameron wrote:
> On Wed, 13 Dec 2023 12:49:47 +0000
> Russell King (Oracle) <rmk+kernel@armlinux.org.uk> wrote:
> 
> > From: James Morse <james.morse@arm.com>
> > 
> > acpi_processor_hotadd_init() will make a CPU present by mapping it
> > based on its hardware id.
> > 
> > 'hotadd_init' is ambiguous once there are two different behaviours
> > for cpu hotplug. This is for toggling the _STA present bit. Subsequent
> > patches will add support for toggling the _STA enabled bit, named
> > acpi_processor_make_enabled().
> > 
> > Rename it acpi_processor_make_present() to make it clear this is
> > for CPUs that were not previously present.
> > 
> > Expose the function prototypes it uses to allow the preprocessor
> > guards to be removed. The IS_ENABLED() check will let the compiler
> > dead-code elimination pass remove this if it isn't going to be
> > used.
> > 
> > Signed-off-by: James Morse <james.morse@arm.com>
> > Tested-by: Miguel Luis <miguel.luis@oracle.com>
> > Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
> > Tested-by: Jianyong Wu <jianyong.wu@arm.com>
> > ---
> > Outstanding comments:
> >  https://lore.kernel.org/r/20230914151720.00007105@Huawei.com
> 
> If it's not caused a build warning yet, chances are high this is fine.
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> >  https://lore.kernel.org/r/b8f430c1-c30f-191f-18c6-f750fa6ba476@redhat.com
> >   For this comment, we use IS_ENABLED() in multiple places in the kernel in
> >   this way, and it isn't a problem.

Yes, for both of these comments, I think they aren't something that
needs any action - these patches have been published in my tree since
October, and that is subject to the kernel build bot which hasn't found
any issues.

So, I'll add your r-b, add my s-o-b, and remove the "outstanding
comments" from this patch.

Thanks.
diff mbox series

Patch

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index c8e960ff0aca..26e3efb74614 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -183,13 +183,15 @@  static void __init acpi_pcc_cpufreq_init(void) {}
 #endif /* CONFIG_X86 */
 
 /* Initialization */
-#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
-static int acpi_processor_hotadd_init(struct acpi_processor *pr)
+static int acpi_processor_make_present(struct acpi_processor *pr)
 {
 	unsigned long long sta;
 	acpi_status status;
 	int ret;
 
+	if (!IS_ENABLED(CONFIG_ACPI_HOTPLUG_PRESENT_CPU))
+		return -ENODEV;
+
 	if (invalid_phys_cpuid(pr->phys_id))
 		return -ENODEV;
 
@@ -223,12 +225,6 @@  static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	cpu_maps_update_done();
 	return ret;
 }
-#else
-static inline int acpi_processor_hotadd_init(struct acpi_processor *pr)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */
 
 static int acpi_processor_get_info(struct acpi_device *device)
 {
@@ -335,7 +331,7 @@  static int acpi_processor_get_info(struct acpi_device *device)
 	 *  because cpuid <-> apicid mapping is persistent now.
 	 */
 	if (invalid_logical_cpuid(pr->id) || !cpu_present(pr->id)) {
-		int ret = acpi_processor_hotadd_init(pr);
+		int ret = acpi_processor_make_present(pr);
 
 		if (ret)
 			return ret;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 36071bc11acd..19d009ca9e7a 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -301,12 +301,10 @@  static inline int acpi_processor_evaluate_cst(acpi_handle handle, u32 cpu,
 }
 #endif
 
-#ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
 /* Arch dependent functions for cpu hotplug support */
 int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
 		 int *pcpu);
 int acpi_unmap_cpu(int cpu);
-#endif /* CONFIG_ACPI_HOTPLUG_PRESENT_CPU */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
 int acpi_get_ioapic_id(acpi_handle handle, u32 gsi_base, u64 *phys_addr);