mbox series

[0/2] *** Add fixed-paritions to phyCORE-AM62x and phyCORE-AM64x ***

Message ID 20231215191838.1925082-1-nmorrisson@phytec.com (mailing list archive)
Headers show
Series *** Add fixed-paritions to phyCORE-AM62x and phyCORE-AM64x *** | expand

Message

Nathan Morrisson Dec. 15, 2023, 7:18 p.m. UTC
Add a fixed-partitions node to the NOR flash of the phyCORE-AM62x
and phyCORE-AM64x to enable the bootloader to fixup the partitions
during boot.

Nathan Morrisson (2):
  arm64: dts: ti: k3-am62-phycore-som: Add fixed-partitions to NOR Flash
  arm64: dts: ti: k3-am64-phycore-som: Add fixed-partitions to NOR Flash

 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 6 ++++++
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 6 ++++++
 2 files changed, 12 insertions(+)

Comments

Andrew Davis Dec. 15, 2023, 7:20 p.m. UTC | #1
On 12/15/23 1:18 PM, Nathan Morrisson wrote:
> Add a fixed-partitions node to the NOR flash of the phyCORE-AM62x
> and phyCORE-AM64x to enable the bootloader to fixup the partitions
> during boot.
> 

Why can't your bootloader add these nodes?

Andrew

> Nathan Morrisson (2):
>    arm64: dts: ti: k3-am62-phycore-som: Add fixed-partitions to NOR Flash
>    arm64: dts: ti: k3-am64-phycore-som: Add fixed-partitions to NOR Flash
> 
>   arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 6 ++++++
>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 6 ++++++
>   2 files changed, 12 insertions(+)
>
Nathan Morrisson Dec. 18, 2023, 6:47 p.m. UTC | #2
Hi Andrew,

We are adding the nodes directly to the device tree to match what is 
done in other device trees, for example: k3-am642-tqma64xxl.dtsi. You 
are correct that this could be done by the bootloader instead though. 
Why do you prefer having the bootloader add the nodes?

Regards,

Nathan

On 12/15/23 11:20 AM, Andrew Davis wrote:
> On 12/15/23 1:18 PM, Nathan Morrisson wrote:
>> Add a fixed-partitions node to the NOR flash of the phyCORE-AM62x
>> and phyCORE-AM64x to enable the bootloader to fixup the partitions
>> during boot.
>>
>
> Why can't your bootloader add these nodes?
>
> Andrew
>
>> Nathan Morrisson (2):
>>    arm64: dts: ti: k3-am62-phycore-som: Add fixed-partitions to NOR 
>> Flash
>>    arm64: dts: ti: k3-am64-phycore-som: Add fixed-partitions to NOR 
>> Flash
>>
>>   arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 6 ++++++
>>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 6 ++++++
>>   2 files changed, 12 insertions(+)
>>
Andrew Davis Dec. 18, 2023, 7:41 p.m. UTC | #3
On 12/18/23 12:47 PM, Nathan Morrisson wrote:
> Hi Andrew,
> 
> We are adding the nodes directly to the device tree to match what is done in other device trees, for example: k3-am642-tqma64xxl.dtsi. You are correct that this could be done by the bootloader instead though. Why do you prefer having the bootloader add the nodes?
> 

k3-am642-tqma64xxl.dtsi should be fixed, it slipped past me and
shouldn't be used as a reference.

The bootloader might not fill it out at all, what if we start
using the new MTD GPT partitions? Then the new bootloaders
will have to start *removing* these stale half-nodes.

If the bootloader is going to add fixed partitions it should do
the whole job. There is no good reason to have a half complete
nodes here.

Andrew

> Regards,
> 
> Nathan
> 
> On 12/15/23 11:20 AM, Andrew Davis wrote:
>> On 12/15/23 1:18 PM, Nathan Morrisson wrote:
>>> Add a fixed-partitions node to the NOR flash of the phyCORE-AM62x
>>> and phyCORE-AM64x to enable the bootloader to fixup the partitions
>>> during boot.
>>>
>>
>> Why can't your bootloader add these nodes?
>>
>> Andrew
>>
>>> Nathan Morrisson (2):
>>>    arm64: dts: ti: k3-am62-phycore-som: Add fixed-partitions to NOR Flash
>>>    arm64: dts: ti: k3-am64-phycore-som: Add fixed-partitions to NOR Flash
>>>
>>>   arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 6 ++++++
>>>   arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 6 ++++++
>>>   2 files changed, 12 insertions(+)
>>>