diff mbox series

[v2,3/3] ARM: dts: rockchip: Remove rockchip,default-sample-phase from rk3036.dtsi

Message ID 20231218105523.2478315-4-andyshrk@163.com (mailing list archive)
State New, archived
Headers show
Series Fix mainline support for rk3036 kylin board | expand

Commit Message

Andy Yan Dec. 18, 2023, 10:55 a.m. UTC
From: Andy Yan <andy.yan@rock-chips.com>

This should be a per board property, should not be put in
a soc core dtsi.

And when this property convert from default-sample-phase
in linux-5.7 by commit 8a385eb57296 ("ARM: dts: rockchip: fix
rockchip,default-sample-phase property names"), the emmc
on rk3036 kylin board get a initialising error:

[    4.512797] Freeing unused kernel memory: 8192K
[    4.519500] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
[    4.530971] mmc1: error -84 whilst initialising MMC card
[    4.537277] Run /init as init process
[    4.550932] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    4.664717] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
[    4.676156] mmc1: error -84 whilst initialising MMC card

I think the reason why the emmc on rk3036 kylin board was able
to work before linux-5.7 was that the illegal property was not
correctly identified by the rockchip dw_mmc driver.

Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

(no changes since v1)

 arch/arm/boot/dts/rockchip/rk3036.dtsi | 1 -
 1 file changed, 1 deletion(-)

Comments

Shawn Lin Dec. 19, 2023, 10:01 a.m. UTC | #1
On 2023/12/18 18:55, Andy Yan wrote:
> From: Andy Yan <andy.yan@rock-chips.com>
> 
> This should be a per board property, should not be put in
> a soc core dtsi.
> 
> And when this property convert from default-sample-phase
> in linux-5.7 by commit 8a385eb57296 ("ARM: dts: rockchip: fix
> rockchip,default-sample-phase property names"), the emmc
> on rk3036 kylin board get a initialising error:
> 
> [    4.512797] Freeing unused kernel memory: 8192K
> [    4.519500] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
> [    4.530971] mmc1: error -84 whilst initialising MMC card
> [    4.537277] Run /init as init process
> [    4.550932] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
> [    4.664717] mmc_host mmc1: Bus speed (slot 0) = 37125000Hz (slot req 37500000Hz, actual 37125000HZ div = 0)
> [    4.676156] mmc1: error -84 whilst initialising MMC card
> 
> I think the reason why the emmc on rk3036 kylin board was able
> to work before linux-5.7 was that the illegal property was not
> correctly identified by the rockchip dw_mmc driver.
> 
> Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi")
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> (no changes since v1)
> 
>   arch/arm/boot/dts/rockchip/rk3036.dtsi | 1 -
>   1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
> index 5344803442a1..466952bf9db4 100644
> --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
> +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
> @@ -287,7 +287,6 @@ emmc: mmc@1021c000 {
>   		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
>   			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
>   		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> -		rockchip,default-sample-phase = <158>;
>   		disable-wp;
>   		dmas = <&pdma 12>;
>   		dma-names = "rx-tx";
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 5344803442a1..466952bf9db4 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -287,7 +287,6 @@  emmc: mmc@1021c000 {
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
-		rockchip,default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;
 		dma-names = "rx-tx";