| Message ID | 20231217210629.131486-3-bigunclemax@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | Add D1/T113s thermal sensor controller support | expand |
On Mon, 18 Dec 2023 00:06:23 +0300 Maksim Kiselev <bigunclemax@gmail.com> wrote: Hi Maksim, > From: Maxim Kiselev <bigunclemax@gmail.com> > > This patch adds a thermal sensor controller support for the D1/T113s, > which is similar to the one on H6, but with only one sensor and > different scale and offset values. That looks alright to me, the offset and scale values match the converted values in the manual, and the rest looks indeed the same as used on the H6. > Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Thanks, Andre > --- > drivers/thermal/sun8i_thermal.c | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c > index f989b55a8aa8..6a8e386dbc8d 100644 > --- a/drivers/thermal/sun8i_thermal.c > +++ b/drivers/thermal/sun8i_thermal.c > @@ -606,6 +606,18 @@ static const struct ths_thermal_chip sun50i_h6_ths = { > .calc_temp = sun8i_ths_calc_temp, > }; > > +static const struct ths_thermal_chip sun20i_d1_ths = { > + .sensor_num = 1, > + .has_bus_clk_reset = true, > + .offset = 188552, > + .scale = 673, > + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, > + .calibrate = sun50i_h6_ths_calibrate, > + .init = sun50i_h6_thermal_init, > + .irq_ack = sun50i_h6_irq_ack, > + .calc_temp = sun8i_ths_calc_temp, > +}; > + > static const struct of_device_id of_ths_match[] = { > { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, > { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, > @@ -614,6 +626,7 @@ static const struct of_device_id of_ths_match[] = { > { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths }, > { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, > { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, > + { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, > { /* sentinel */ }, > }; > MODULE_DEVICE_TABLE(of, of_ths_match);
Dne nedelja, 17. december 2023 ob 22:06:23 CET je Maksim Kiselev napisal(a): > From: Maxim Kiselev <bigunclemax@gmail.com> > > This patch adds a thermal sensor controller support for the D1/T113s, > which is similar to the one on H6, but with only one sensor and > different scale and offset values. > > Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Best regards, Jernej
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index f989b55a8aa8..6a8e386dbc8d 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -606,6 +606,18 @@ static const struct ths_thermal_chip sun50i_h6_ths = { .calc_temp = sun8i_ths_calc_temp, }; +static const struct ths_thermal_chip sun20i_d1_ths = { + .sensor_num = 1, + .has_bus_clk_reset = true, + .offset = 188552, + .scale = 673, + .temp_data_base = SUN50I_H6_THS_TEMP_DATA, + .calibrate = sun50i_h6_ths_calibrate, + .init = sun50i_h6_thermal_init, + .irq_ack = sun50i_h6_irq_ack, + .calc_temp = sun8i_ths_calc_temp, +}; + static const struct of_device_id of_ths_match[] = { { .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths }, { .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths }, @@ -614,6 +626,7 @@ static const struct of_device_id of_ths_match[] = { { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths }, { .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths }, { .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths }, + { .compatible = "allwinner,sun20i-d1-ths", .data = &sun20i_d1_ths }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, of_ths_match);