| Message ID | 20231221-ufs-reset-ensure-effect-before-delay-v3-2-2195a1b66d2e@redhat.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | scsi: ufs: Remove overzealous memory barriers | expand |
On 12/22/2023 3:09 AM, Andrew Halaney wrote: > Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure > that write has gone through to the device. > > mb() ensure that the write completes, but completion doesn't mean that > it isn't stored in a buffer somewhere. The recommendation for > ensuring this bit has taken effect on the device is to perform a read > back to force it to make it all the way to the device. This is > documented in device-io.rst and a talk by Will Deacon on this can > be seen over here: > > https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 > > Let's do that to ensure the bit hits the device. Because the mb()'s > purpose wasn't to add extra ordering (on top of the ordering guaranteed > by writel()/readl()), it can safely be removed. > > Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") > Signed-off-by: Andrew Halaney <ahalaney@redhat.com> > --- > drivers/ufs/host/ufs-qcom.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c > index 480787048e75..4c15c8a1d058 100644 > --- a/drivers/ufs/host/ufs-qcom.c > +++ b/drivers/ufs/host/ufs-qcom.c > @@ -501,7 +501,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, > * make sure above write gets applied before we return from > * this function. > */ > - mb(); > + ufshcd_readl(hba, REG_UFS_SYS1CLK_1US); > } > > return 0; > Reviewed-by: Can Guo <quic_cang@quicinc.com>
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 480787048e75..4c15c8a1d058 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -501,7 +501,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, * make sure above write gets applied before we return from * this function. */ - mb(); + ufshcd_readl(hba, REG_UFS_SYS1CLK_1US); } return 0;
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure that write has gone through to the device. mb() ensure that the write completes, but completion doesn't mean that it isn't stored in a buffer somewhere. The recommendation for ensuring this bit has taken effect on the device is to perform a read back to force it to make it all the way to the device. This is documented in device-io.rst and a talk by Will Deacon on this can be seen over here: https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678 Let's do that to ensure the bit hits the device. Because the mb()'s purpose wasn't to add extra ordering (on top of the ordering guaranteed by writel()/readl()), it can safely be removed. Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> --- drivers/ufs/host/ufs-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)