| Message ID | 20231220-sa8295p-gpu-v2-7-4763246b72c0@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | arm64: dts: qcom: sa8295p: Enable GPU | expand |
On Fri, 22 Dec 2023 at 06:40, Bjorn Andersson <quic_bjorande@quicinc.com> wrote: > > With the necessary support in place for supplying VDD_GFX from the > MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU > and the GPU on the SA8295P ADP. > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On 22.12.2023 05:39, Bjorn Andersson wrote: > With the necessary support in place for supplying VDD_GFX from the > MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU > and the GPU on the SA8295P ADP. > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- [...] > +&gpucc { > + vdd-gfx-supply = <&vdd_gfx>; > + status = "okay"; > +}; Already enabled > + > +&gmu { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = "qcom/sa8295p/a690_zap.mbn"; > + }; > +}; > + > +&gpu_smmu { > + status = "okay"; > +}; Already enabled Konrad
On Wed, Dec 27, 2023 at 02:09:47AM +0100, Konrad Dybcio wrote: > On 22.12.2023 05:39, Bjorn Andersson wrote: > > With the necessary support in place for supplying VDD_GFX from the > > MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU > > and the GPU on the SA8295P ADP. > > > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > > --- > [...] > > > +&gpucc { > > + vdd-gfx-supply = <&vdd_gfx>; > > + status = "okay"; > > +}; > Already enabled > No, we're disabling these in sa8540p.dtsi, so they need to be re-enabled here. I don't remember if it's because the attempt to bring up gfx.lvl or if it's the attempt to operate the GPU components without adequate VDD_GFX, that is causing the issue...but either way, we don't survive boot. It's possible that we could move the max20411 up to sa8540p.dtsi to avoid the intermediate disable, but I'm not confident that it's "part of the platform"... Regards, Bjorn > > + > > +&gmu { > > + status = "okay"; > > +}; > > + > > +&gpu { > > + status = "okay"; > > + > > + zap-shader { > > + memory-region = <&gpu_mem>; > > + firmware-name = "qcom/sa8295p/a690_zap.mbn"; > > + }; > > +}; > > + > > +&gpu_smmu { > > + status = "okay"; > > +}; > Already enabled > > > Konrad
On 27.12.2023 21:21, Bjorn Andersson wrote: > On Wed, Dec 27, 2023 at 02:09:47AM +0100, Konrad Dybcio wrote: >> On 22.12.2023 05:39, Bjorn Andersson wrote: >>> With the necessary support in place for supplying VDD_GFX from the >>> MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU >>> and the GPU on the SA8295P ADP. >>> >>> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> >>> --- >> [...] >> >>> +&gpucc { >>> + vdd-gfx-supply = <&vdd_gfx>; >>> + status = "okay"; >>> +}; >> Already enabled >> > > No, we're disabling these in sa8540p.dtsi, so they need to be re-enabled > here. > > I don't remember if it's because the attempt to bring up gfx.lvl or if > it's the attempt to operate the GPU components without adequate VDD_GFX, > that is causing the issue...but either way, we don't survive boot. Oh right! On 8155 touching mmcx, lcx or lmx would kaboom the platform.. > > > It's possible that we could move the max20411 up to sa8540p.dtsi to > avoid the intermediate disable, but I'm not confident that it's "part of > the platform"... Yeah, it's probably a question that is impossible to answer, as my wild assumption is that all designs are ADP-derived anyway.. Konrad
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 14327c697116..304c8d79bd31 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -108,6 +108,13 @@ edp3_connector_in: endpoint { }; }; }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + }; }; &apps_rsc { @@ -286,6 +293,28 @@ vdd_gfx: regulator@39 { }; }; +&gpucc { + vdd-gfx-supply = <&vdd_gfx>; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sa8295p/a690_zap.mbn"; + }; +}; + +&gpu_smmu { + status = "okay"; +}; + &mdss0 { status = "okay"; };
With the necessary support in place for supplying VDD_GFX from the MAX20411 regulator, enable the GPU clock controller, GMU, Adreno SMMU and the GPU on the SA8295P ADP. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)