@@ -7873,6 +7873,8 @@ F: include/linux/mii.h
F: include/linux/of_net.h
F: include/linux/phy.h
F: include/linux/phy_fixed.h
+F: include/linux/phy_link_topology.h
+F: include/linux/phy_link_topology_core.h
F: include/linux/phylib_stubs.h
F: include/linux/platform_data/mdio-bcm-unimac.h
F: include/linux/platform_data/mdio-gpio.h
@@ -2,7 +2,7 @@
# Makefile for Linux PHY drivers
libphy-y := phy.o phy-c45.o phy-core.o phy_device.o \
- linkmode.o
+ linkmode.o phy_link_topology.o
mdio-bus-y += mdio_bus.o mdio_device.o
ifdef CONFIG_MDIO_DEVICE
@@ -29,6 +29,7 @@
#include <linux/phy.h>
#include <linux/phylib_stubs.h>
#include <linux/phy_led_triggers.h>
+#include <linux/phy_link_topology.h>
#include <linux/pse-pd/pse.h>
#include <linux/property.h>
#include <linux/rtnetlink.h>
@@ -1491,6 +1492,11 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
if (phydev->sfp_bus_attached)
dev->sfp_bus = phydev->sfp_bus;
+
+ err = phy_link_topo_add_phy(&dev->link_topo, phydev,
+ PHY_UPSTREAM_MAC, dev);
+ if (err)
+ goto error;
}
/* Some Ethernet drivers try to connect to a PHY device before
@@ -1819,6 +1825,7 @@ void phy_detach(struct phy_device *phydev)
if (dev) {
phydev->attached_dev->phydev = NULL;
phydev->attached_dev = NULL;
+ phy_link_topo_del_phy(&dev->link_topo, phydev);
}
phydev->phylink = NULL;
new file mode 100644
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Infrastructure to handle all PHY devices connected to a given netdev,
+ * either directly or indirectly attached.
+ *
+ * Copyright (c) 2023 Maxime Chevallier<maxime.chevallier@bootlin.com>
+ */
+
+#include <linux/phy_link_topology.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/rtnetlink.h>
+#include <linux/xarray.h>
+
+int phy_link_topo_add_phy(struct phy_link_topology *topo,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream)
+{
+ struct phy_device_node *pdn;
+ int ret;
+
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
+ if (!pdn)
+ return -ENOMEM;
+
+ pdn->phy = phy;
+ switch (upt) {
+ case PHY_UPSTREAM_MAC:
+ pdn->upstream.netdev = (struct net_device *)upstream;
+ if (phy_on_sfp(phy))
+ pdn->parent_sfp_bus = pdn->upstream.netdev->sfp_bus;
+ break;
+ case PHY_UPSTREAM_PHY:
+ pdn->upstream.phydev = (struct phy_device *)upstream;
+ if (phy_on_sfp(phy))
+ pdn->parent_sfp_bus = pdn->upstream.phydev->sfp_bus;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+ pdn->upstream_type = upt;
+
+ ret = xa_alloc_cyclic(&topo->phys, &phy->phyindex, pdn, xa_limit_32b,
+ &topo->next_phy_index, GFP_KERNEL);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ kfree(pdn);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_add_phy);
+
+void phy_link_topo_del_phy(struct phy_link_topology *topo,
+ struct phy_device *phy)
+{
+ struct phy_device_node *pdn = xa_erase(&topo->phys, phy->phyindex);
+
+ phy->phyindex = 0;
+
+ kfree(pdn);
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_del_phy);
@@ -40,7 +40,6 @@
#include <net/dcbnl.h>
#endif
#include <net/netprio_cgroup.h>
-
#include <linux/netdev_features.h>
#include <linux/neighbour.h>
#include <uapi/linux/netdevice.h>
@@ -52,6 +51,7 @@
#include <net/net_trackers.h>
#include <net/net_debug.h>
#include <net/dropreason-core.h>
+#include <linux/phy_link_topology_core.h>
struct netpoll_info;
struct device;
@@ -2047,6 +2047,7 @@ enum netdev_stat_type {
* @fcoe_ddp_xid: Max exchange id for FCoE LRO by ddp
*
* @priomap: XXX: need comments on this one
+ * @link_topo: Physical link topology tracking attached PHYs
* @phydev: Physical device may attach itself
* for hardware timestamping
* @sfp_bus: attached &struct sfp_bus structure.
@@ -2441,6 +2442,7 @@ struct net_device {
#if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
struct netprio_map __rcu *priomap;
#endif
+ struct phy_link_topology link_topo;
struct phy_device *phydev;
struct sfp_bus *sfp_bus;
struct lock_class_key *qdisc_tx_busylock;
@@ -544,6 +544,9 @@ struct macsec_ops;
* @drv: Pointer to the driver for this PHY instance
* @devlink: Create a link between phy dev and mac dev, if the external phy
* used by current mac interface is managed by another mac interface.
+ * @phyindex: Unique id across the phy's parent tree of phys to address the PHY
+ * from userspace, similar to ifindex. A zero index means the PHY
+ * wasn't assigned an id yet.
* @phy_id: UID for this device found during discovery
* @c45_ids: 802.3-c45 Device Identifiers if is_c45.
* @is_c45: Set to true if this PHY uses clause 45 addressing.
@@ -643,6 +646,7 @@ struct phy_device {
struct device_link *devlink;
+ u32 phyindex;
u32 phy_id;
struct phy_c45_device_ids c45_ids;
new file mode 100644
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PHY device list allow maintaining a list of PHY devices that are
+ * part of a netdevice's link topology. PHYs can for example be chained,
+ * as is the case when using a PHY that exposes an SFP module, on which an
+ * SFP transceiver that embeds a PHY is connected.
+ *
+ * This list can then be used by userspace to leverage individual PHY
+ * capabilities.
+ */
+#ifndef __PHY_LINK_TOPOLOGY_H
+#define __PHY_LINK_TOPOLOGY_H
+
+#include <linux/ethtool.h>
+#include <linux/phy_link_topology_core.h>
+
+struct xarray;
+struct phy_device;
+struct net_device;
+struct sfp_bus;
+
+struct phy_device_node {
+ enum phy_upstream upstream_type;
+
+ union {
+ struct net_device *netdev;
+ struct phy_device *phydev;
+ } upstream;
+
+ struct sfp_bus *parent_sfp_bus;
+
+ struct phy_device *phy;
+};
+
+static inline struct phy_device *
+phy_link_topo_get_phy(struct phy_link_topology *topo, u32 phyindex)
+{
+ struct phy_device_node *pdn = xa_load(&topo->phys, phyindex);
+
+ if (pdn)
+ return pdn->phy;
+
+ return NULL;
+}
+
+#if IS_ENABLED(CONFIG_PHYLIB)
+int phy_link_topo_add_phy(struct phy_link_topology *topo,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream);
+
+void phy_link_topo_del_phy(struct phy_link_topology *lt, struct phy_device *phy);
+
+#else
+static inline int phy_link_topo_add_phy(struct phy_link_topology *topo,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream)
+{
+ return 0;
+}
+
+static inline void phy_link_topo_del_phy(struct phy_link_topology *topo,
+ struct phy_device *phy)
+{
+}
+#endif
+
+#endif /* __PHY_LINK_TOPOLOGY_H */
new file mode 100644
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PHY_LINK_TOPOLOGY_CORE_H
+#define __PHY_LINK_TOPOLOGY_CORE_H
+
+struct xarray;
+
+struct phy_link_topology {
+ struct xarray phys;
+
+ u32 next_phy_index;
+};
+
+static inline void phy_link_topo_init(struct phy_link_topology *topo)
+{
+ xa_init_flags(&topo->phys, XA_FLAGS_ALLOC1);
+ topo->next_phy_index = 1;
+}
+
+#endif /* __PHY_LINK_TOPOLOGY_CORE_H */
@@ -2216,4 +2216,20 @@ struct ethtool_link_settings {
* __u32 map_lp_advertising[link_mode_masks_nwords];
*/
};
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ * or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+ PHY_UPSTREAM_MAC,
+ PHY_UPSTREAM_PHY,
+};
+
#endif /* _UAPI_LINUX_ETHTOOL_H */
@@ -153,6 +153,7 @@
#include <linux/prandom.h>
#include <linux/once_lite.h>
#include <net/netdev_rx_queue.h>
+#include <linux/phy_link_topology_core.h>
#include "dev.h"
#include "net-sysfs.h"
@@ -10872,6 +10873,8 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
#ifdef CONFIG_NET_SCHED
hash_init(dev->qdisc_hash);
#endif
+ phy_link_topo_init(&dev->link_topo);
+
dev->priv_flags = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
setup(dev);
Link topologies containing multiple network PHYs attached to the same net_device can be found when using a PHY as a media converter for use with an SFP connector, on which an SFP transceiver containing a PHY can be used. With the current model, the transceiver's PHY can't be used for operations such as cable testing, timestamping, macsec offload, etc. The reason being that most of the logic for these configuration, coming from either ethtool netlink or ioctls tend to use netdev->phydev, which in multi-phy systems will reference the PHY closest to the MAC. Introduce a numbering scheme allowing to enumerate PHY devices that belong to any netdev, which can in turn allow userspace to take more precise decisions with regard to each PHY's configuration. The numbering is maintained per-netdev, in a phy_device_list. The numbering works similarly to a netdevice's ifindex, with identifiers that are only recycled once INT_MAX has been reached. This prevents races that could occur between PHY listing and SFP transceiver removal/insertion. The identifiers are assigned at phy_attach time, as the numbering depends on the netdevice the phy is attached to. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V5: - Dropped the ASSERT_RTNL() - Made the phy_link_topo_get_phy inline V4: - Moved the phy_link_topo_init() code to an inline header function - Made the code build without phylib V3: - Renamed to phy_link_topology - Added assertions for RTNL - Various cleanups of leftover, unused test code - Made the PHY index u32 MAINTAINERS | 2 + drivers/net/phy/Makefile | 2 +- drivers/net/phy/phy_device.c | 7 +++ drivers/net/phy/phy_link_topology.c | 66 +++++++++++++++++++++++++ include/linux/netdevice.h | 4 +- include/linux/phy.h | 4 ++ include/linux/phy_link_topology.h | 67 ++++++++++++++++++++++++++ include/linux/phy_link_topology_core.h | 19 ++++++++ include/uapi/linux/ethtool.h | 16 ++++++ net/core/dev.c | 3 ++ 10 files changed, 188 insertions(+), 2 deletions(-) create mode 100644 drivers/net/phy/phy_link_topology.c create mode 100644 include/linux/phy_link_topology.h create mode 100644 include/linux/phy_link_topology_core.h