diff mbox series

[v5,4/5] Input: cs40l50 - Add support for the CS40L50 haptic driver

Message ID 20240104223643.876292-5-jogletre@opensource.cirrus.com (mailing list archive)
State New, archived
Headers show
Series Add support for CS40L50 | expand

Commit Message

James Ogletree Jan. 4, 2024, 10:36 p.m. UTC
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.

The input driver provides the interface for control of
haptic effects through the device.

Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
---
 MAINTAINERS                        |   1 +
 drivers/input/misc/Kconfig         |  10 +
 drivers/input/misc/Makefile        |   1 +
 drivers/input/misc/cs40l50-vibra.c | 572 +++++++++++++++++++++++++++++
 4 files changed, 584 insertions(+)
 create mode 100644 drivers/input/misc/cs40l50-vibra.c

Comments

Charles Keepax Jan. 5, 2024, 3:01 p.m. UTC | #1
On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
> Introduce support for Cirrus Logic Device CS40L50: a
> haptic driver with waveform memory, integrated DSP,
> and closed-loop algorithms.
> 
> The input driver provides the interface for control of
> haptic effects through the device.
> 
> Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
> ---
> +#include <linux/input.h>
> +#include <linux/mfd/cs40l50.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>

Need bitfield.h

Thanks,
Charles
Dmitry Torokhov Jan. 7, 2024, 1:58 a.m. UTC | #2
Hi James,

On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
> +static int vibra_add(struct input_dev *dev, struct ff_effect *effect,
> +		     struct ff_effect *old)
> +{
> +	struct vibra_info *info = input_get_drvdata(dev);
> +	u32 len = effect->u.periodic.custom_len;
> +
> +	if (effect->type != FF_PERIODIC || effect->u.periodic.waveform != FF_CUSTOM) {
> +		dev_err(info->dev, "Type (%#X) or waveform (%#X) unsupported\n",
> +			effect->type, effect->u.periodic.waveform);
> +		return -EINVAL;
> +	}
> +
> +	memcpy(&info->add_effect, effect, sizeof(struct ff_effect));

structures can be assigned, no need for memcpy.

> +
> +	info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
> +	if (!info->add_effect.u.periodic.custom_data)
> +		return -ENOMEM;
> +
> +	if (copy_from_user(info->add_effect.u.periodic.custom_data,
> +			   effect->u.periodic.custom_data, sizeof(s16) * len)) {
> +		info->add_error = -EFAULT;
> +		goto out_free;
> +	}
> +
> +	queue_work(info->vibe_wq, &info->add_work);
> +	flush_work(&info->add_work);

I do not understand the need of scheduling a work here. You are
obviously in a sleeping context (otherwise you would not be able to
execute flush_work()) so you should be able to upload the effect right
here.

...

> +
> +static int vibra_playback(struct input_dev *dev, int effect_id, int val)
> +{
> +	struct vibra_info *info = input_get_drvdata(dev);
> +
> +	if (val > 0) {

value is supposed to signal how many times an effect should be repeated.
It looks like you are not handling this at all.

> +		info->start_effect = &dev->ff->effects[effect_id];
> +		queue_work(info->vibe_wq, &info->vibe_start_work);

The API allows playback of several effects at once, the way you have it
done here if multiple requests come at same time only one will be
handled.

> +	} else {
> +		queue_work(info->vibe_wq, &info->vibe_stop_work);

Which effect are you stopping? All of them? You need to stop a
particular one.

> +	}

Essentially you need a queue of requests and a single work handling all
of them...

...

> +
> +static int cs40l50_vibra_probe(struct platform_device *pdev)
> +{
> +	struct cs40l50 *cs40l50 = dev_get_drvdata(pdev->dev.parent);
> +	struct vibra_info *info;
> +	int error;
> +
> +	info = devm_kzalloc(pdev->dev.parent, sizeof(*info), GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	info->dev = cs40l50->dev;
> +	info->regmap = cs40l50->regmap;
> +
> +	info->input = devm_input_allocate_device(info->dev);
> +	if (!info->input)
> +		return -ENOMEM;
> +
> +	info->input->id.product = cs40l50->devid & 0xFFFF;
> +	info->input->id.version = cs40l50->revid;
> +	info->input->name = "cs40l50_vibra";
> +
> +	input_set_drvdata(info->input, info);
> +	input_set_capability(info->input, EV_FF, FF_PERIODIC);
> +	input_set_capability(info->input, EV_FF, FF_CUSTOM);
> +
> +	error = input_ff_create(info->input, FF_MAX_EFFECTS);
> +	if (error) {
> +		dev_err(info->dev, "Failed to create input device\n");
> +		return error;
> +	}
> +
> +	info->input->ff->upload = vibra_add;
> +	info->input->ff->playback = vibra_playback;
> +	info->input->ff->erase = vibra_erase;
> +
> +	INIT_LIST_HEAD(&info->effect_head);
> +
> +	info->dsp = cs40l50_dsp;
> +
> +	info->vibe_wq = alloc_ordered_workqueue("vibe_wq", 0);
> +	if (!info->vibe_wq)
> +		return -ENOMEM;
> +
> +	error = devm_add_action_or_reset(info->dev, vibra_remove_wq, info);
> +	if (error)
> +		return error;

Why do you need a dedicated workqueue? So you can flush works?

> +
> +	mutex_init(&info->lock);
> +
> +	INIT_WORK(&info->vibe_start_work, vibra_start_worker);
> +	INIT_WORK(&info->vibe_stop_work, vibra_stop_worker);
> +	INIT_WORK(&info->erase_work, vibra_erase_worker);
> +	INIT_WORK(&info->add_work, vibra_add_worker);
> +
> +	error = input_register_device(info->input);
> +	if (error) {
> +		dev_err(info->dev, "Failed to register input device\n");
> +		input_free_device(info->input);

Not needed, you are using devm_input_allocate_device().

> +		return error;
> +	}
> +
> +	return devm_add_action_or_reset(info->dev, vibra_input_unregister,
> +					info->input);

Not needed, managed input devices will be unregistered automatically by
devm.

Thanks.
James Ogletree Jan. 9, 2024, 10:03 p.m. UTC | #3
Hi Dmitry,

Thank you for your excellent review. Just a few questions.

> On Jan 6, 2024, at 7:58 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> 
> On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:

>> +
>> + info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
>> + if (!info->add_effect.u.periodic.custom_data)
>> + return -ENOMEM;
>> +
>> + if (copy_from_user(info->add_effect.u.periodic.custom_data,
>> +   effect->u.periodic.custom_data, sizeof(s16) * len)) {
>> + info->add_error = -EFAULT;
>> + goto out_free;
>> + }
>> +
>> + queue_work(info->vibe_wq, &info->add_work);
>> + flush_work(&info->add_work);
> 
> I do not understand the need of scheduling a work here. You are
> obviously in a sleeping context (otherwise you would not be able to
> execute flush_work()) so you should be able to upload the effect right
> here.

Scheduling work here is to ensure its ordering with “playback" worker
items, which themselves are called in atomic context and so need
deferred work. I think this explains why we need a workqueue as well,
but please correct me.

> 
>> +
>> +static int vibra_playback(struct input_dev *dev, int effect_id, int val)
>> +{
>> + struct vibra_info *info = input_get_drvdata(dev);
>> +
>> + if (val > 0) {
> 
> value is supposed to signal how many times an effect should be repeated.
> It looks like you are not handling this at all.

For playbacks, we mandate that the input_event value field is set to either 1
or 0 to command either a start playback or stop playback respectively.
Values other than that should be rejected, so in the next version I will fix this
to explicitly check for 1 or 0.

> 
>> + info->start_effect = &dev->ff->effects[effect_id];
>> + queue_work(info->vibe_wq, &info->vibe_start_work);
> 
> The API allows playback of several effects at once, the way you have it
> done here if multiple requests come at same time only one will be
> handled.

I think I may need some clarification on this point. Why would concurrent
start/stop playback commands get dropped? It seems they would all be
added to the workqueue and executed eventually.

> 
>> + } else {
>> + queue_work(info->vibe_wq, &info->vibe_stop_work);
> 
> Which effect are you stopping? All of them? You need to stop a
> particular one.

Our implementation of “stop” stops all effects in flight which is intended.
That is probably unusual so I will add a comment here in the next
version.

Best,
James
Dmitry Torokhov Jan. 9, 2024, 10:31 p.m. UTC | #4
On Tue, Jan 09, 2024 at 10:03:02PM +0000, James Ogletree wrote:
> Hi Dmitry,
> 
> Thank you for your excellent review. Just a few questions.
> 
> > On Jan 6, 2024, at 7:58 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> > 
> > On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
> 
> >> +
> >> + info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
> >> + if (!info->add_effect.u.periodic.custom_data)
> >> + return -ENOMEM;
> >> +
> >> + if (copy_from_user(info->add_effect.u.periodic.custom_data,
> >> +   effect->u.periodic.custom_data, sizeof(s16) * len)) {
> >> + info->add_error = -EFAULT;
> >> + goto out_free;
> >> + }
> >> +
> >> + queue_work(info->vibe_wq, &info->add_work);
> >> + flush_work(&info->add_work);
> > 
> > I do not understand the need of scheduling a work here. You are
> > obviously in a sleeping context (otherwise you would not be able to
> > execute flush_work()) so you should be able to upload the effect right
> > here.
> 
> Scheduling work here is to ensure its ordering with “playback" worker
> items, which themselves are called in atomic context and so need
> deferred work. I think this explains why we need a workqueue as well,
> but please correct me.
> 
> > 
> >> +
> >> +static int vibra_playback(struct input_dev *dev, int effect_id, int val)
> >> +{
> >> + struct vibra_info *info = input_get_drvdata(dev);
> >> +
> >> + if (val > 0) {
> > 
> > value is supposed to signal how many times an effect should be repeated.
> > It looks like you are not handling this at all.
> 
> For playbacks, we mandate that the input_event value field is set to either 1

I am sorry, who is "we"?

> or 0 to command either a start playback or stop playback respectively.
> Values other than that should be rejected, so in the next version I will fix this
> to explicitly check for 1 or 0.

No, please implement the API properly.

> 
> > 
> >> + info->start_effect = &dev->ff->effects[effect_id];
> >> + queue_work(info->vibe_wq, &info->vibe_start_work);
> > 
> > The API allows playback of several effects at once, the way you have it
> > done here if multiple requests come at same time only one will be
> > handled.
> 
> I think I may need some clarification on this point. Why would concurrent
> start/stop playback commands get dropped? It seems they would all be
> added to the workqueue and executed eventually.

You only have one instance of vibe_start_work, as well as only one
"slot" to hold the effect you want to start. So if you issue 2 request
back to back to play effect 1 and 2 you are likely to end with
info->start_effect == 2 and that is what vibe_start_work handler will
observe, effectively dropping request to play effect 1 on the floor.

> 
> > 
> >> + } else {
> >> + queue_work(info->vibe_wq, &info->vibe_stop_work);
> > 
> > Which effect are you stopping? All of them? You need to stop a
> > particular one.
> 
> Our implementation of “stop” stops all effects in flight which is intended.
> That is probably unusual so I will add a comment here in the next
> version.

Again, please implement the driver properly, not define your own
carveouts for the expected behavior.

Thanks.
James Ogletree Jan. 10, 2024, 2:36 p.m. UTC | #5
> On Jan 9, 2024, at 4:31 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> 
> On Tue, Jan 09, 2024 at 10:03:02PM +0000, James Ogletree wrote:
>> Hi Dmitry,
>> 
>> Thank you for your excellent review. Just a few questions.
>> 
>>> On Jan 6, 2024, at 7:58 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>>> 
>>> On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
>>>> +
>>>> + info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
>>>> + if (!info->add_effect.u.periodic.custom_data)
>>>> + return -ENOMEM;
>>>> +
>>>> + if (copy_from_user(info->add_effect.u.periodic.custom_data,
>>>> +   effect->u.periodic.custom_data, sizeof(s16) * len)) {
>>>> + info->add_error = -EFAULT;
>>>> + goto out_free;
>>>> + }
>>>> +
>>>> + queue_work(info->vibe_wq, &info->add_work);
>>>> + flush_work(&info->add_work);
>>> 
>>> I do not understand the need of scheduling a work here. You are
>>> obviously in a sleeping context (otherwise you would not be able to
>>> execute flush_work()) so you should be able to upload the effect right
>>> here.
>> 
>> Scheduling work here is to ensure its ordering with “playback" worker
>> items, which themselves are called in atomic context and so need
>> deferred work. I think this explains why we need a workqueue as well,
>> but please correct me.
>> 
>>> 
>>>> +
>>>> +static int vibra_playback(struct input_dev *dev, int effect_id, int val)
>>>> +{
>>>> + struct vibra_info *info = input_get_drvdata(dev);
>>>> +
>>>> + if (val > 0) {
>>> 
>>> value is supposed to signal how many times an effect should be repeated.
>>> It looks like you are not handling this at all.
>> 
>> For playbacks, we mandate that the input_event value field is set to either 1
> 
> I am sorry, who is "we"?

Just a royal “I”. Apologies, no claim to authority intended here. :)

> 
>> or 0 to command either a start playback or stop playback respectively.
>> Values other than that should be rejected, so in the next version I will fix this
>> to explicitly check for 1 or 0.
> 
> No, please implement the API properly.

Ack.

> 
>> 
>>> 
>>>> + info->start_effect = &dev->ff->effects[effect_id];
>>>> + queue_work(info->vibe_wq, &info->vibe_start_work);
>>> 
>>> The API allows playback of several effects at once, the way you have it
>>> done here if multiple requests come at same time only one will be
>>> handled.
>> 
>> I think I may need some clarification on this point. Why would concurrent
>> start/stop playback commands get dropped? It seems they would all be
>> added to the workqueue and executed eventually.
> 
> You only have one instance of vibe_start_work, as well as only one
> "slot" to hold the effect you want to start. So if you issue 2 request
> back to back to play effect 1 and 2 you are likely to end with
> info->start_effect == 2 and that is what vibe_start_work handler will
> observe, effectively dropping request to play effect 1 on the floor.

Understood, ack.

> 
>> 
>>> 
>>>> + } else {
>>>> + queue_work(info->vibe_wq, &info->vibe_stop_work);
>>> 
>>> Which effect are you stopping? All of them? You need to stop a
>>> particular one.
>> 
>> Our implementation of “stop” stops all effects in flight which is intended.
>> That is probably unusual so I will add a comment here in the next
>> version.
> 
> Again, please implement the driver properly, not define your own
> carveouts for the expected behavior.

Ack, and a clarification question: the device is not actually able to
play multiple effects at once. In that case, does stopping a specific
effect entail just cancelling an effect in the queue?

Best,
James
Dmitry Torokhov Jan. 11, 2024, 7:28 a.m. UTC | #6
On Wed, Jan 10, 2024 at 02:36:55PM +0000, James Ogletree wrote:
> 
> > On Jan 9, 2024, at 4:31 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> > 
> > On Tue, Jan 09, 2024 at 10:03:02PM +0000, James Ogletree wrote:
> >> Hi Dmitry,
> >> 
> >> Thank you for your excellent review. Just a few questions.
> >> 
> >>> On Jan 6, 2024, at 7:58 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> >>> 
> >>> On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
> >>>> +
> >>>> + info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
> >>>> + if (!info->add_effect.u.periodic.custom_data)
> >>>> + return -ENOMEM;
> >>>> +
> >>>> + if (copy_from_user(info->add_effect.u.periodic.custom_data,
> >>>> +   effect->u.periodic.custom_data, sizeof(s16) * len)) {
> >>>> + info->add_error = -EFAULT;
> >>>> + goto out_free;
> >>>> + }
> >>>> +
> >>>> + queue_work(info->vibe_wq, &info->add_work);
> >>>> + flush_work(&info->add_work);
> >>> 
> >>> I do not understand the need of scheduling a work here. You are
> >>> obviously in a sleeping context (otherwise you would not be able to
> >>> execute flush_work()) so you should be able to upload the effect right
> >>> here.
> >> 
> >> Scheduling work here is to ensure its ordering with “playback" worker
> >> items, which themselves are called in atomic context and so need
> >> deferred work. I think this explains why we need a workqueue as well,
> >> but please correct me.
> >> 
> >>> 
> >>>> +
> >>>> +static int vibra_playback(struct input_dev *dev, int effect_id, int val)
> >>>> +{
> >>>> + struct vibra_info *info = input_get_drvdata(dev);
> >>>> +
> >>>> + if (val > 0) {
> >>> 
> >>> value is supposed to signal how many times an effect should be repeated.
> >>> It looks like you are not handling this at all.
> >> 
> >> For playbacks, we mandate that the input_event value field is set to either 1
> > 
> > I am sorry, who is "we"?
> 
> Just a royal “I”. Apologies, no claim to authority intended here. :)
> 
> > 
> >> or 0 to command either a start playback or stop playback respectively.
> >> Values other than that should be rejected, so in the next version I will fix this
> >> to explicitly check for 1 or 0.
> > 
> > No, please implement the API properly.
> 
> Ack.
> 
> > 
> >> 
> >>> 
> >>>> + info->start_effect = &dev->ff->effects[effect_id];
> >>>> + queue_work(info->vibe_wq, &info->vibe_start_work);
> >>> 
> >>> The API allows playback of several effects at once, the way you have it
> >>> done here if multiple requests come at same time only one will be
> >>> handled.
> >> 
> >> I think I may need some clarification on this point. Why would concurrent
> >> start/stop playback commands get dropped? It seems they would all be
> >> added to the workqueue and executed eventually.
> > 
> > You only have one instance of vibe_start_work, as well as only one
> > "slot" to hold the effect you want to start. So if you issue 2 request
> > back to back to play effect 1 and 2 you are likely to end with
> > info->start_effect == 2 and that is what vibe_start_work handler will
> > observe, effectively dropping request to play effect 1 on the floor.
> 
> Understood, ack.
> 
> > 
> >> 
> >>> 
> >>>> + } else {
> >>>> + queue_work(info->vibe_wq, &info->vibe_stop_work);
> >>> 
> >>> Which effect are you stopping? All of them? You need to stop a
> >>> particular one.
> >> 
> >> Our implementation of “stop” stops all effects in flight which is intended.
> >> That is probably unusual so I will add a comment here in the next
> >> version.
> > 
> > Again, please implement the driver properly, not define your own
> > carveouts for the expected behavior.
> 
> Ack, and a clarification question: the device is not actually able to
> play multiple effects at once. In that case, does stopping a specific
> effect entail just cancelling an effect in the queue?

In this case I believe the device should declare maximum number of
effects as 1. Userspace is supposed to determine maximum number of
simultaneously playable effects by issuing EVIOCGEFFECTS ioctl on the
corresponding event device.

Thanks.
James Ogletree Jan. 12, 2024, 3:41 p.m. UTC | #7
> On Jan 11, 2024, at 1:28 AM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> 
> On Wed, Jan 10, 2024 at 02:36:55PM +0000, James Ogletree wrote:
>> 
>>> On Jan 9, 2024, at 4:31 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>>> 
>>> On Tue, Jan 09, 2024 at 10:03:02PM +0000, James Ogletree wrote:
>>>> 
>>>> 
>>>>> On Jan 6, 2024, at 7:58 PM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>>>>> 
>>>>> On Thu, Jan 04, 2024 at 10:36:37PM +0000, James Ogletree wrote:
>>>>>> + } else {
>>>>>> + queue_work(info->vibe_wq, &info->vibe_stop_work);
>>>>> 
>>>>> Which effect are you stopping? All of them? You need to stop a
>>>>> particular one.
>>>> 
>>>> Our implementation of “stop” stops all effects in flight which is intended.
>>>> That is probably unusual so I will add a comment here in the next
>>>> version.
>>> 
>>> Again, please implement the driver properly, not define your own
>>> carveouts for the expected behavior.
>> 
>> Ack, and a clarification question: the device is not actually able to
>> play multiple effects at once. In that case, does stopping a specific
>> effect entail just cancelling an effect in the queue?
> 
> In this case I believe the device should declare maximum number of
> effects as 1. Userspace is supposed to determine maximum number of
> simultaneously playable effects by issuing EVIOCGEFFECTS ioctl on the
> corresponding event device.

Is it possible to specify the device’s maximum simultaneous effects
without also restricting the number of effects the user can upload? It
looks like both are tied to ff->max_effects.

Best,
James
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 69a9e0a3b968..24cfb4f017bb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4940,6 +4940,7 @@  M:	Ben Bright <ben.bright@cirrus.com>
 L:	patches@opensource.cirrus.com
 S:	Supported
 F:	Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
+F:	drivers/input/misc/cs40l*
 F:	drivers/mfd/cs40l*
 F:	include/linux/mfd/cs40l*
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6ba984d7f0b1..ee45dbb0636e 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -140,6 +140,16 @@  config INPUT_BMA150
 	  To compile this driver as a module, choose M here: the
 	  module will be called bma150.
 
+config INPUT_CS40L50_VIBRA
+	tristate "CS40L50 Haptic Driver support"
+	depends on MFD_CS40L50_CORE
+	help
+	  Say Y here to enable support for Cirrus Logic's CS40L50
+	  haptic driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cs40l50-vibra.
+
 config INPUT_E3X0_BUTTON
 	tristate "NI Ettus Research USRP E3xx Button support."
 	default n
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 04296a4abe8e..88279de6d3d5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
 obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON)	+= cpcap-pwrbutton.o
+obj-$(CONFIG_INPUT_CS40L50_VIBRA)	+= cs40l50-vibra.o
 obj-$(CONFIG_INPUT_DA7280_HAPTICS)	+= da7280.o
 obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
diff --git a/drivers/input/misc/cs40l50-vibra.c b/drivers/input/misc/cs40l50-vibra.c
new file mode 100644
index 000000000000..cd3c2bf132da
--- /dev/null
+++ b/drivers/input/misc/cs40l50-vibra.c
@@ -0,0 +1,572 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2023 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/input.h>
+#include <linux/mfd/cs40l50.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Wavetables */
+#define CS40L50_RAM_INDEX_START		0x1000000
+#define CS40L50_RAM_INDEX_END		0x100007F
+#define CS40L50_RTH_INDEX_START		0x1400000
+#define CS40L50_RTH_INDEX_END		0x1400001
+#define CS40L50_ROM_INDEX_START		0x1800000
+#define CS40L50_ROM_INDEX_END		0x180001A
+#define CS40L50_OWT_HEADER_SIZE		12
+#define CS40L50_OWT_TYPE_PCM		8
+#define CS40L50_OWT_TYPE_PWLE		12
+#define CS40L50_OWT_PCM_ID		0x0
+#define CS40L50_OWT_CUSTOM_DATA_SIZE	2
+
+/* DSP */
+#define CS40L50_GPIO_BASE		0x2804140
+#define CS40L50_OWT_BASE		0x2805C34
+#define CS40L50_OWT_SIZE		0x2805C38
+#define CS40L50_OWT_NEXT		0x2805C3C
+
+/* GPIO */
+#define CS40L50_GPIO_NUM_MASK		GENMASK(14, 12)
+#define CS40L50_GPIO_EDGE_MASK		BIT(15)
+#define CS40L50_GPIO_MAPPING_INVALID	0
+#define CS40L50_GPIO_DISABLE		0x1FF
+
+enum vibra_bank_type {
+	WVFRM_BANK_RAM,
+	WVFRM_BANK_ROM,
+	WVFRM_BANK_OWT,
+	WVFRM_BANK_NUM,
+};
+
+/* Describes an area in DSP memory populated by effects */
+struct vibra_bank {
+	enum vibra_bank_type bank;
+	u32 base_index;
+	u32 max_index;
+};
+
+struct vibra_effect {
+	enum vibra_bank_type bank;
+	struct list_head list;
+	u32 gpio_mapping;
+	u32 index;
+	int id;
+};
+
+/* Describes haptic interface of loaded DSP firmware */
+struct vibra_dsp {
+	struct vibra_bank *banks;
+	u32 gpio_base_reg;
+	u32 owt_offset_reg;
+	u32 owt_size_reg;
+	u32 owt_base_reg;
+	u32 mailbox_reg;
+	u32 push_owt_cmd;
+	u32 delete_owt_cmd;
+	u32 stop_cmd;
+};
+
+/* Describes configuration and state of haptic operations */
+struct vibra_info {
+	struct device *dev;
+	struct regmap *regmap;
+	struct input_dev *input;
+	struct mutex lock;
+	struct workqueue_struct *vibe_wq;
+	struct work_struct vibe_start_work;
+	struct work_struct vibe_stop_work;
+	struct work_struct erase_work;
+	struct work_struct add_work;
+	struct ff_effect *start_effect;
+	struct ff_effect *erase_effect;
+	struct ff_effect add_effect;
+	struct list_head effect_head;
+	struct vibra_dsp dsp;
+	int erase_error;
+	int add_error;
+};
+
+static struct vibra_effect *vibra_find_effect(int id, struct list_head *effect_head)
+{
+	struct vibra_effect *effect;
+
+	list_for_each_entry(effect, effect_head, list)
+		if (effect->id == id)
+			return effect;
+
+	return NULL;
+}
+
+static int vibra_effect_bank_set(struct vibra_info *info,
+				 struct vibra_effect *effect,
+				 struct ff_periodic_effect add_effect)
+{
+	s16 bank = add_effect.custom_data[0] & 0xffffu;
+	unsigned int len = add_effect.custom_len;
+
+	if (bank >= WVFRM_BANK_NUM) {
+		dev_err(info->dev, "Invalid waveform bank: %d\n", bank);
+		return -EINVAL;
+	}
+
+	effect->bank = len > CS40L50_OWT_CUSTOM_DATA_SIZE ? WVFRM_BANK_OWT : bank;
+
+	return 0;
+}
+
+static int vibra_effect_mapping_set(struct vibra_info *info, u16 button,
+				    struct vibra_effect *effect)
+{
+	u32 gpio_num, gpio_edge;
+
+	if (button) {
+		gpio_num = FIELD_GET(CS40L50_GPIO_NUM_MASK, button);
+		gpio_edge = FIELD_GET(CS40L50_GPIO_EDGE_MASK, button);
+		effect->gpio_mapping = info->dsp.gpio_base_reg +
+				       (gpio_num * 8) - gpio_edge;
+
+		return regmap_write(info->regmap, effect->gpio_mapping, button);
+	}
+
+	effect->gpio_mapping = CS40L50_GPIO_MAPPING_INVALID;
+
+	return 0;
+}
+
+static int vibra_effect_index_set(struct vibra_info *info,
+				  struct vibra_effect *effect,
+				  struct ff_periodic_effect add_effect)
+{
+	struct vibra_effect *owt_effect;
+	u32 base_index, max_index;
+
+	base_index = info->dsp.banks[effect->bank].base_index;
+	max_index = info->dsp.banks[effect->bank].max_index;
+
+	effect->index = base_index;
+
+	switch (effect->bank) {
+	case WVFRM_BANK_OWT:
+		list_for_each_entry(owt_effect, &info->effect_head, list)
+			if (owt_effect->bank == WVFRM_BANK_OWT)
+				effect->index++;
+		break;
+	case WVFRM_BANK_ROM:
+	case WVFRM_BANK_RAM:
+		effect->index += add_effect.custom_data[1] & 0xffffu;
+		break;
+	default:
+		dev_err(info->dev, "Bank not supported: %d\n", effect->bank);
+		return -EINVAL;
+	}
+
+	if (effect->index > max_index || effect->index < base_index) {
+		dev_err(info->dev, "Index out of bounds: %u\n", effect->index);
+		return -ENOSPC;
+	}
+
+	return 0;
+}
+
+/* Describes a header for an effect in the OWT bank */
+struct owt_header {
+	u32 type;
+	u32 data_words;
+	u32 offset;
+} __packed;
+
+static int vibra_upload_owt(struct vibra_info *info, struct vibra_effect *effect,
+			    struct ff_periodic_effect add_effect)
+{
+	u32 len, wt_offset, wt_size;
+	struct owt_header header;
+	u8 *out_data;
+	int error;
+
+	error = regmap_read(info->regmap, info->dsp.owt_offset_reg, &wt_offset);
+	if (error)
+		return error;
+
+	error = regmap_read(info->regmap, info->dsp.owt_size_reg, &wt_size);
+	if (error)
+		return error;
+
+	len = 2 * add_effect.custom_len;
+
+	if ((wt_size * sizeof(u32)) < CS40L50_OWT_HEADER_SIZE + len)
+		return -ENOSPC;
+
+	out_data = kzalloc(CS40L50_OWT_HEADER_SIZE + len, GFP_KERNEL);
+	if (!out_data)
+		return -ENOMEM;
+
+	header.type = add_effect.custom_data[0] == CS40L50_OWT_PCM_ID ? CS40L50_OWT_TYPE_PCM :
+									CS40L50_OWT_TYPE_PWLE;
+	header.offset = CS40L50_OWT_HEADER_SIZE / sizeof(u32);
+	header.data_words = len / sizeof(u32);
+
+	memcpy(out_data, &header, sizeof(header));
+	memcpy(out_data + CS40L50_OWT_HEADER_SIZE, add_effect.custom_data, len);
+
+	error = regmap_bulk_write(info->regmap, info->dsp.owt_base_reg +
+				  (wt_offset * sizeof(u32)), out_data,
+				  CS40L50_OWT_HEADER_SIZE + len);
+	if (error)
+		goto err_free;
+
+	error = regmap_write(info->regmap, info->dsp.mailbox_reg,
+			     info->dsp.push_owt_cmd);
+
+err_free:
+	kfree(out_data);
+
+	return error;
+}
+
+static void vibra_add_worker(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info, add_work);
+	struct ff_effect add_effect = info->add_effect;
+	struct vibra_effect *effect;
+	bool is_new = false;
+	int error;
+
+	error = pm_runtime_resume_and_get(info->dev);
+	if (error < 0) {
+		info->add_error = error;
+		return;
+	}
+
+	mutex_lock(&info->lock);
+
+	effect = vibra_find_effect(add_effect.id, &info->effect_head);
+	if (!effect) {
+		effect = kzalloc(sizeof(*effect), GFP_KERNEL);
+		if (!effect) {
+			error = -ENOMEM;
+			goto err_mutex;
+		}
+		effect->id = add_effect.id;
+		is_new = true;
+	}
+
+	error = vibra_effect_bank_set(info, effect, add_effect.u.periodic);
+	if (error)
+		goto err_free;
+
+	error = vibra_effect_index_set(info, effect, add_effect.u.periodic);
+	if (error)
+		goto err_free;
+
+	error = vibra_effect_mapping_set(info, add_effect.trigger.button, effect);
+	if (error)
+		goto err_free;
+
+	if (effect->bank == WVFRM_BANK_OWT)
+		error = vibra_upload_owt(info, effect,  add_effect.u.periodic);
+
+err_free:
+	if (is_new) {
+		if (error)
+			kfree(effect);
+		else
+			list_add(&effect->list, &info->effect_head);
+	}
+
+err_mutex:
+	mutex_unlock(&info->lock);
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+
+	info->add_error = error;
+}
+
+static int vibra_add(struct input_dev *dev, struct ff_effect *effect,
+		     struct ff_effect *old)
+{
+	struct vibra_info *info = input_get_drvdata(dev);
+	u32 len = effect->u.periodic.custom_len;
+
+	if (effect->type != FF_PERIODIC || effect->u.periodic.waveform != FF_CUSTOM) {
+		dev_err(info->dev, "Type (%#X) or waveform (%#X) unsupported\n",
+			effect->type, effect->u.periodic.waveform);
+		return -EINVAL;
+	}
+
+	memcpy(&info->add_effect, effect, sizeof(struct ff_effect));
+
+	info->add_effect.u.periodic.custom_data = kcalloc(len, sizeof(s16), GFP_KERNEL);
+	if (!info->add_effect.u.periodic.custom_data)
+		return -ENOMEM;
+
+	if (copy_from_user(info->add_effect.u.periodic.custom_data,
+			   effect->u.periodic.custom_data, sizeof(s16) * len)) {
+		info->add_error = -EFAULT;
+		goto out_free;
+	}
+
+	queue_work(info->vibe_wq, &info->add_work);
+	flush_work(&info->add_work);
+out_free:
+	kfree(info->add_effect.u.periodic.custom_data);
+	info->add_effect.u.periodic.custom_data = NULL;
+
+	return info->add_error;
+}
+
+static void vibra_start_worker(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info,
+					       vibe_start_work);
+	struct vibra_effect *effect;
+
+	if (pm_runtime_resume_and_get(info->dev) < 0)
+		return;
+
+	mutex_lock(&info->lock);
+
+	effect = vibra_find_effect(info->start_effect->id, &info->effect_head);
+	if (effect)
+		regmap_write(info->regmap, info->dsp.mailbox_reg, effect->index);
+
+	mutex_unlock(&info->lock);
+
+	if (!effect)
+		dev_err(info->dev, "Effect to play not found\n");
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+}
+
+static void vibra_stop_worker(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info,
+					       vibe_stop_work);
+
+	if (pm_runtime_resume_and_get(info->dev) < 0)
+		return;
+
+	mutex_lock(&info->lock);
+
+	regmap_write(info->regmap, info->dsp.mailbox_reg, info->dsp.stop_cmd);
+
+	mutex_unlock(&info->lock);
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+}
+
+static int vibra_playback(struct input_dev *dev, int effect_id, int val)
+{
+	struct vibra_info *info = input_get_drvdata(dev);
+
+	if (val > 0) {
+		info->start_effect = &dev->ff->effects[effect_id];
+		queue_work(info->vibe_wq, &info->vibe_start_work);
+	} else {
+		queue_work(info->vibe_wq, &info->vibe_stop_work);
+	}
+
+	return 0;
+}
+
+static void vibra_erase_worker(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info,
+					       erase_work);
+	struct vibra_effect *owt_effect, *erase_effect;
+	int error;
+
+	error = pm_runtime_resume_and_get(info->dev);
+	if (error < 0) {
+		info->erase_error = error;
+		return;
+	}
+
+	mutex_lock(&info->lock);
+
+	erase_effect = vibra_find_effect(info->erase_effect->id,
+					 &info->effect_head);
+	if (!erase_effect) {
+		dev_err(info->dev, "Effect to erase not found\n");
+		error = -EINVAL;
+		goto err_mutex;
+	}
+
+	if (erase_effect->gpio_mapping != CS40L50_GPIO_MAPPING_INVALID) {
+		error = regmap_write(info->regmap, erase_effect->gpio_mapping,
+				     CS40L50_GPIO_DISABLE);
+		if (error)
+			goto err_mutex;
+	}
+
+	if (erase_effect->bank == WVFRM_BANK_OWT) {
+		error = regmap_write(info->regmap, info->dsp.mailbox_reg,
+				     info->dsp.delete_owt_cmd | erase_effect->index);
+		if (error)
+			goto err_mutex;
+
+		list_for_each_entry(owt_effect, &info->effect_head, list)
+			if (owt_effect->bank == WVFRM_BANK_OWT &&
+			    owt_effect->index > erase_effect->index)
+				owt_effect->index--;
+	}
+
+	list_del(&erase_effect->list);
+	kfree(erase_effect);
+
+err_mutex:
+	mutex_unlock(&info->lock);
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+
+	info->erase_error = error;
+}
+
+static int vibra_erase(struct input_dev *dev, int effect_id)
+{
+	struct vibra_info *info = input_get_drvdata(dev);
+
+	info->erase_effect = &dev->ff->effects[effect_id];
+
+	queue_work(info->vibe_wq, &info->erase_work);
+	flush_work(&info->erase_work);
+
+	return info->erase_error;
+}
+
+static struct vibra_bank cs40l50_banks[] = {
+	{
+		.bank =		WVFRM_BANK_RAM,
+		.base_index =	CS40L50_RAM_INDEX_START,
+		.max_index =	CS40L50_RAM_INDEX_END,
+	},
+	{
+		.bank =		WVFRM_BANK_ROM,
+		.base_index =	CS40L50_ROM_INDEX_START,
+		.max_index =	CS40L50_ROM_INDEX_END,
+	},
+	{
+		.bank =		WVFRM_BANK_OWT,
+		.base_index =	CS40L50_RTH_INDEX_START,
+		.max_index =	CS40L50_RTH_INDEX_END,
+	},
+};
+
+static struct vibra_dsp cs40l50_dsp = {
+	.banks = cs40l50_banks,
+	.gpio_base_reg = CS40L50_GPIO_BASE,
+	.owt_base_reg = CS40L50_OWT_BASE,
+	.owt_offset_reg = CS40L50_OWT_NEXT,
+	.owt_size_reg = CS40L50_OWT_SIZE,
+	.mailbox_reg = CS40L50_DSP_QUEUE,
+	.push_owt_cmd = CS40L50_OWT_PUSH,
+	.delete_owt_cmd = CS40L50_OWT_DELETE,
+	.stop_cmd = CS40L50_STOP_PLAYBACK,
+};
+
+static void vibra_input_unregister(void *data)
+{
+	input_unregister_device((struct input_dev *)data);
+}
+
+static void vibra_remove_wq(void *data)
+{
+	struct vibra_info *info = data;
+
+	flush_workqueue(info->vibe_wq);
+	destroy_workqueue(info->vibe_wq);
+}
+
+static int cs40l50_vibra_probe(struct platform_device *pdev)
+{
+	struct cs40l50 *cs40l50 = dev_get_drvdata(pdev->dev.parent);
+	struct vibra_info *info;
+	int error;
+
+	info = devm_kzalloc(pdev->dev.parent, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = cs40l50->dev;
+	info->regmap = cs40l50->regmap;
+
+	info->input = devm_input_allocate_device(info->dev);
+	if (!info->input)
+		return -ENOMEM;
+
+	info->input->id.product = cs40l50->devid & 0xFFFF;
+	info->input->id.version = cs40l50->revid;
+	info->input->name = "cs40l50_vibra";
+
+	input_set_drvdata(info->input, info);
+	input_set_capability(info->input, EV_FF, FF_PERIODIC);
+	input_set_capability(info->input, EV_FF, FF_CUSTOM);
+
+	error = input_ff_create(info->input, FF_MAX_EFFECTS);
+	if (error) {
+		dev_err(info->dev, "Failed to create input device\n");
+		return error;
+	}
+
+	info->input->ff->upload = vibra_add;
+	info->input->ff->playback = vibra_playback;
+	info->input->ff->erase = vibra_erase;
+
+	INIT_LIST_HEAD(&info->effect_head);
+
+	info->dsp = cs40l50_dsp;
+
+	info->vibe_wq = alloc_ordered_workqueue("vibe_wq", 0);
+	if (!info->vibe_wq)
+		return -ENOMEM;
+
+	error = devm_add_action_or_reset(info->dev, vibra_remove_wq, info);
+	if (error)
+		return error;
+
+	mutex_init(&info->lock);
+
+	INIT_WORK(&info->vibe_start_work, vibra_start_worker);
+	INIT_WORK(&info->vibe_stop_work, vibra_stop_worker);
+	INIT_WORK(&info->erase_work, vibra_erase_worker);
+	INIT_WORK(&info->add_work, vibra_add_worker);
+
+	error = input_register_device(info->input);
+	if (error) {
+		dev_err(info->dev, "Failed to register input device\n");
+		input_free_device(info->input);
+		return error;
+	}
+
+	return devm_add_action_or_reset(info->dev, vibra_input_unregister,
+					info->input);
+}
+
+static const struct platform_device_id vibra_id_match[] = {
+	{ "cs40l50-vibra", },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, vibra_id_match);
+
+static struct platform_driver cs40l50_vibra_driver = {
+	.probe		= cs40l50_vibra_probe,
+	.id_table	= vibra_id_match,
+	.driver		= {
+		.name	= "cs40l50-vibra",
+	},
+};
+module_platform_driver(cs40l50_vibra_driver);
+
+MODULE_DESCRIPTION("CS40L50 Advanced Haptic Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");